What Powerline adapters to buy ?

hi guys can i have some recommendations as to what powerline adapters to buy and use, as my ones that i have now from 3-4 years ago are restrictiong my download to 20meg and not the full 80meg, thanks for any information

Stoofa wrote:
If wiring is poor then buying "faster" adpters isn't really going to help.
If you're limited to say 60mb, then buy 200, 500 or higher - you're still going to be limited.
I purchased some Devolo 500mb adapters (went for this brand as I wanted power pass-through, so I could plug something into the adapter and also wanted a second WAP, which one of the pair of powerline adapters doubles up as).
I get around 220mb according to the diagnostic tools.
I think you maybe surprised what a difference using faster adapters has on your speeds. You say that you get around 220mb with the 500mb adapters, well in that case you may get around 110 to 115mb on the 200mb adapters, which is a big difference.
The new 650mb adapters has new technology that allows higher speeds if you have poor quality wiring or a great distance than the 500mb ones do.

Similar Messages

  • Wifi vs. Powerline adapters?

    Trying to find a good networking solution because I am in a long house and the cable/wired router is in the front and I am in the back and worried about range speed of Wifi. I am looking at these Powerline adapters:
    http://www.bestbuy.com/site/Actiontec---500-Mbps-P​owerline-Home-Theater-Network-Adapter-Kit/5215483.​...
    or
    http://www.bestbuy.com/site/Tp-Link+-+TL-PA211+AV2​00+Mini+Powerline+Starter+Kit/4359873.p?id=1218475​...
    Anyone use these or Powerline? How is Powerline speed?
    Powerline seems cheaper then a good N router and for my house might be more stable, right?
    These powerline adapters are homeplug certified, but the non homeplug certified are cheeper, but the homeplug ones seem faster what dose homeplug really mean?
    Have Glop, will Glope...

    Jimmienomam wrote:
    Lex, how do they work for you? I've always been intrigued by this since it hit consumer markets a while ago. Read plenty of good and some bad reviews. Just wanted another opinion.
    I reccommend them without hesitation and my entire home network consists of nothing but Netgear Powerline adapters hooked into my router and I don't even run a wireless network anymore. The only reason not to use them is price and that is only because they are very expensive to buy in retail markets because they typically only carry the Netgear kits which are twice the price on average and there were not a lot of alternatives until the past six months. If you can get them cheap online, they are a great buy. The one thing you need to keep in mind is that there are single, double, and multi-connection adapters and you should always go for the one that fits each individual room. If you have an HDTV, some consoles, and a Blu-Ray player in your living room, you get the Powerline A/V kit, which is actually a better deal than the single adapters because you can buy a few of those and end up with a bunch of switches to use in each room as well as a bunch of single connection adapters for moving around as needed. HomePlug stuff can be mixed and matched as needed so you don't have just buy a single brand because they all work together with the same standards.

  • BT Infinity 2 - Bought 200Mbps powerline adapters ...

    Hi!
    I had BT Infinity 2 installed this week and was happy to see that I was getting 75Mbps down and 17Mbps up via ethernet cables.  However, I really want a cableless solution.  I bought a TP-Link TL-PA211KIT 200Mbps twin pack, had no problem setting it up, but my speed has dropped to 52Mbps down and 14.6Mbps up.
    After looking at the diagnostic tool, I found that the quality was hovering between 140-150Mbps.  So I have a couple of questions:
    1.  Is there anything I can do with these existing adapters in order to improve my speed?
    2.  Would buying 500Mbps adapters and using those instead allow me to get the full use of my connection?
    I've tried moving the adapters around the house but I've not noticed a lot of difference.  The computer is upstairs with one adapter and the other is downstairs, plugged into the mains right next to my hub.  I'd really like to be able to make full use of what I'm paying for so I'd be grateful for a little advice.
    Thanks,
    John
    Solved!
    Go to Solution.

    As you have found, unfortunately the connection synch speed of powerline adapters does not equate to their actual throughput. There is a lot of error correction overhead that means actual throughput is much less than synch.
    I haven't been able to find a definitive conversion between synch speed and throughput for powerline adapters, I think because a lot depends upon how noisy your environment is. However you should be aware that going from 200 to 500Mbps adapters doesn't mean that your throughput wilI increase by 2.5 times.
    That said inyour case it may be sufficient to transfer your full Infinity rate. I have found that 500Mbps Netgear adapters were capable of transferring at 72Mbps down / 16Mbps up between my downstairs router and my upstairs PC, but only after I fiddled with their QoS settings to prioritise the PC line over my smart TVs which also use adapters on the same LAN.
    PS. The netgears were synching at about 450Mbps to achieve this throughput.

  • Configuring non-BT provided Powerline Adapters

    I recently installed BT Vision+.  The package came with a BT HomeHub2 router and two COMTREND PG9020 powerline adapters.  I chose to replace my Netgear 802.11n router with the BT Home Hub2 - and it all works fine. 
    To my original Netgear router i had recently connected a pair of ADDON HP2000 powerline adapters which allowed my son more assured access to the router (due to some thick walls wireless was a tad unrelaible).
    I now want to know how can I add the two ADDON HP2000 powerline adapters onto the BTHomeHub2 provided network using one of the COMTREND PG9020 as an Access Point (AP) and the other connected to my BT-V box.  With the two spare ADDON HP2000 powerline adpaters I should be able to have two more ethernet acccess points.
    How do I configure the two ADDON HP2000 devices to work through the COMTREND PG9020 Access Point to the Home Hub2?
    I am reasonably IT literate but please don't get too technical.
    Cheers
    gwato

    According to : http://www.addon-tech.com/new/product_info.php?id=104
    HP2000 use the following standard for Networking over Mains:
    HomePlug AV 1.0, Co-exists with existing HomePlug 1.0
    PG-9020 don't (as far as I can read from the specification).
    http://www.comtrend-store.com/index.php?page=shop.product_details&flypage=flypage_book.tpl&product_i...
    PG-9030's do.
    http://www.comtrend-store.com/store/details/28/6/accessories/homeplug%C2%AE-av-ethernet-adapter---pg...
    Good, luck - it might work, but I wouldn't be the farm. Briefly - you need to give them all the same encryption key and encryption type. You need to use a web browser and navigate to the IP address of each adapter. You should be able to identify where they are by using the Attached Devices section of your HomeHub:
    http://192.168.1.254/hnet_device.lp?be=1&l2=0&l0=2&l1=3
    Once you have identified them, login using their IP address - typing the password (password or admin):
    Navigate to Change Configuration (Left Nav)->Mac (Top Nav)
    e.g on my Comtrends, the encryption is set here:
    http://192.168.1.69/mac.htm
    Make sure all adapters have the Same Encrpyption Key and Type.
    You can try and get them to work (it's worth a try). Comtrend aren't brilliant at providing the actual standards they use. If you can't get it to work following the instructions, it might be better buying 3 or 4 of the same type of adapter - it is easy to configure them using the guides.
    Hope this helps(?)

  • Powerline Adapters included?

    Hi there,
    I'm expecting delivery of a BT YouView box and was curious to know if a set of powerline adapters are included as standard in the order.  The issue of the box's location in relation to the Home Hub wasn't raised by The BT lady that made the sale and online the order refers only to the box...
    Anyone had any recent experience that could shed light on this.
    Thanks in advance!
    Solved!
    Go to Solution.

    The Email confirmation provides the following information:
    What's coming and when
    What's coming When Between
    Your broadband kit
    20 Nov 2013
    7am and 6pm
    Your set-top box
    7am and 6pm 
    The online order tracking information says:
    Equipment ordered:YouView box (Humax)

  • BT Powerline Adapters

    Hiya Can you tell me if you can buy a single powerline adapter, I got two a few years back when I was with BT Vision, since upgrading to YouView one of them just seems to have stopped working. My Broadband is being stupid at the moment and keeps cutting off so I need to move my Hub back out to the main socket but I need the adapter for YouView, any advice would be great on where I can get another one, the last I heard they were rather expensive though. I actually thought we would get new ones with the new boxes but guess now. Thanks in advance

    Call BT and tell them that one of your powerline adapters has failed, that you first used them for BTVision service and have since used them on your YouView box, but don't mention how old they are. There is a good chance BT will send out 2 new ones free of charge
    You may need to return the 2 older ones, so don't be tempted to bin them.
    -+-No longer a forum member-+-

  • Re: Powerline adapters for extending wi-fi.

    I thought 3 or 4 powerline adapters could be set to work together - various persons on web say it works ok??
    Sorry this isn't a solution - more of a problem
    My problem is (apart from being daft) - I have a BT3 hub with powerline adapter operating a youview box, but I can't get wi-fi in that room(house extension) Can i use it or another"cloned" adapter to connect some kind of extender. I recently bought a TP link TD-W8961ND to use as a remote access point for wi-fi but it doesn't have WAN port so I guess it's the wrong thing.
    I can't locate a normal extender anywhere so I need to use powerline adapters somehow - but what do I need to make it work?? Help please!
    Solved!
    Go to Solution.

    You need to add an Ethernet switch in that room, to give you more than one Ethernet connection. Then a wireless access point like the TP Link TL-WA701ND, and plug that into one of the Ethernet ports on the switch. Another port on that switch would connect to the Youview box. That would give you a couple of spare Ethernet ports to coneect other stuff to.
    The TP link TD-W8961ND is not the right device to do this.
    Powerline adapter  -------  Ethenet Switch --------   TP Link WA701ND
                                                    "              ---------  YouView Box
    A suitable Ethernet switch would be the TP Link TL-SF1005D
    There is a similar diagram on this link, but with different Powerline adapters.
    http://forumhelp.dyndns.info/networking/powerline3​.jpg
    TP Link setup
    http://forumhelp.dyndns.info/hardware/TP_link/wa70​1nd/wa701nd_v2/wa701nd_v2_wiz.html
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • I cant install flash player on my razr i android 4.1.2 what is happen i buy the app and didnt work

    Well when i finally buy my new cell and get out from symbian os one off the first things i gonna do is install flash player for listen my music on last fm and see the movies from streaming but i am too disapoint cause i goo to google store and find a free app from flash this make me soo happy ok i download it when i see its only say the version i need to buy and its 5 euro i am a brazilian here is almost 16 R$ a big assalt for app but i know flash soo good and buyed it via paypal it send me to a download page i get it there but when i gonna install it, it say the app is not install, the pack seens to be corrupt, i see the forum i make my configuration for app from outside but even like this did not install someone can help me i am get crazy with it.

    Hey bro i just asked about a refound but they tell to contact the
    developers cause after 15 min later they cant reefound and other they say
    the app they send is free and i donwload it for free from google play and
    then from there i gef a pay pall link from 5 euro i hope to know what kind
    off app is this cause it is not a official cause is on google play how it
    could be there if this one are discontinued i am assalted:.? In a official
    web site from google or its a official link? I am lost hows i can
    responsability for this? Hope you can help me i know you are not the
    trouble maker but is the only direct aswer i have! Tks about it i was found
    about browser with flash moments ago but i did know about the bateries
    issues good alert hope you can help a litle more too know what happen too
    me and know how responsability for this
    Hope talk too you soon
    Em 21/12/2013 17:28, "Mike M" <[email protected]> escreveu:
        Re: i cant install flash player on my razr i android 4.1.2 what is
    happen i buy the app and didnt work  created by Mike M<http://forums.adobe.com/people/CFMcBlob>in *Installing
    Flash Player* - View the full discussion<http://forums.adobe.com/message/5950011#5950011

  • What PSU should i buy?

    Hey, i have an important question. I have seen a bunch of posts here on the forum about lack of juice out of PSU's with certain hardware configs....
    I think i have the same problems here, flickering textures in games, when playing games they just quit and im back in windows.... and even sometimes it just hangs.... this is only when playing games or 3D rendering in 3D studio max.
    Here are my system specs.
    ESC K7S6A mainboard (bios version 1.0f )
    AMD Athlon XP 2400+
    512 MB DDR
    WD 40GB/8mb cache (7200rpm)
    WD 80GB/2mb cache (7200rpm)
    LiteOn CDRW 48x
    LiteOn CD/DVD 48x/24x
    SB Audigy player 5.1
    MSI G4Ti4600-VTD (also tested with MSI G4MX440)
    3com Network card 10/100
    Microsoft optical mouse
    PSU 300w
    Windows XP Professional Corp. (NL + SP1)
    DirectX 9.0
    nVidia 41.09 drivers for WinXP
    I think that my PSU is not good (correct me if im wrong), what PSU should i buy with my specs? please give me a brand and typenumber...

    Is there any way to check if the power supply is definetly causing problems - I just bought am G4MX440 and after installing it (was using 32meg TNT2), game graphics are all screwey
    TO-AOT (blank screen)
    Q3 (all i get in the menus is the firey surround 'quake 3')
    GTA3 ('bout a hundred tiled menu windows)
    After reading many of the posts I assumed it was my power supply, went back to where i bought it (both the pc and the card) to upgrade nah it's the card bring it back.
    P4 1.5 on GA-8IDX
    SONY DVD
    PANASONIC 8*4*32 CD-R/W
    512 MB SD
    MSI G4MX440-T
    some TV tuner card (dunno)
    directX 8.1 also tried 9
    300W psu
    3.3 - 14A    | 160W combined
    5    - 30A    |
    12  - 15A
    These guys are selling all their P4 packages with various G4 and other card with 300W power supplies without issue (or so they say)
    so any way to check for sure, will the rails dip significantly?  I be grateful for any suggestions caus if i take it back you know it will sit on a shelf for a a few days b4 they get around to it - and i'm itching to try it out....

  • Trying to set up Airport Express with Ethernet Powerline adapters

    Hello,
    Having some problems trying to set up my Airport Express with Netgear ethernet powerline adapters.
    I want to set up as follows:
    Wireless Belkin router --- powerline <---> powerline --- airport express --- home stereo system
    The problem I have is that I can connect the airport x in client mode & wirelessly play music using airtunes (until the sound breaks up) but itunes does not find the airport x when connected via the powerlines.
    I have airport admin utility configured as follows:
    Airport tab:
    Wireless mode: create a wireless network
    Wireless network name: same as my wireless router SSID
    Allow this network to be extended: unticked
    radio mode: 802.11n (802.11b/g compatible)
    Channel: automatic
    Wireless Security: WPA/WPA2 personal (as per my router)
    Wireless Password: as per my router
    Verify Password: as per my router
    Internet tab:
    Connect using: ethernet
    Connection sharing: off (bridge mode)
    Music tab:
    Enable Air Tunes ticket
    no password set
    In iTunes, I have home sharing on & share entire library selected with no password set.
    Using OS 10.6.5 & Airport Express 7.5.2
    I can ping the IP address of the airport express when connected via the powerlines but cannot select the speakers in iTunes (they are greyed out).
    Any assistance would be appreciated....
    Thanks

    Hi,
    Thanks for the quick response...
    As suggested, I connected up the Airport X to the Belkin and plugged in a pair of headphones. It didn't work, still could not select the Airport X as speakers.
    Dug out my old Netgear DG834G and connected that up in place of the Belkin - it worked. Next connected in the Netgear powerlines and it still worked.
    So, the problem is the relatively new Belkin F7D4401 router.
    Looks like I will have to find an alternative 802.11n...
    Thanks for your help.
    Regards
    Simon

  • Please help i bought an iphone from ebay and it is unlocked and refirbished by apple how do i know what sim card to buy for it? iPhone 3GS

    please help i bought an iphone from ebay and it is unlocked and refirbished by apple how do i know what sim card to buy for it? iPhone 3G

    Contact your chosen cellular provider to obtain a compatible SIM card.

  • Linksys and NetGear Powerline Adapters

    I am wanting to improve my powerline adapters and before I purchase I want to make sure if the Linksys Homeplug AV2 Powerline Kit (PLEK500)  and the NetGear Powerline 500Mpbs 4-Port Network Adapter Kit (XAVB5004)  can be used on with WRT610n router? The Powerlines will be in two different level locations in my home.

    Hi, Cowboybutch. The PLEK500 will work with WRT610N as long as you will connect the adapter to the same circuit breaker. I found an article regarding this adapter that might help you get to know more about this device. Here's the link: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&app=vw&vw=1&login=1&json=1&docid=b6c894be283c45c4a9e7f...

  • What cord do i buy for my apple tv?

    What cord do I buy for my apple tv?

    To connect to the TV?  For that you need an HDMI cable.  The TV needs an HDMI socket.

  • 2008 Mac Mini - what webcam can I buy for this computer?????

    OMG help me. I have a 2008 Mac Mini - I need to skype and have tried a few webcams that either just don't work or there is no sound - I understand it nees to be the correct kind for mac... so what webcam can I use on this computer I've been researching for days and can't seem to find any definitive answers anywhere online.... what webcam can I buy for a mini mac 2008??

    Try this:
    http://www.amazon.com/Logitech-Widescreen-Calling-Recording-960-000694/dp/B004FH O5Y6
    Works for me and Skype, anyway. 
    The microphone will have to be built-in to the camera and USB-connected - like the one above (and NOT a pink 3.5mm plug!)
    You also sure you're selecting the correct audio input on the webcams you've already tried?

  • What windows do i buy for my new macbook pro

    what windows do i buy for my new macbook pro

    Windows 7 64bit Home Premium, Professional, or Ultimate.
    http://windows.microsoft.com/en-US/windows/shop
    See a comparison between versions here http://windows.microsoft.com/en-US/windows7/products/compare

Maybe you are looking for

  • Why can't I get AirPlay mirroring to work?

    When I double tap the home button and slide to the right, I can turn on AirPlay but it does not mirror to the tv.  The software is updated on my ipad2 and on apple tv.  My apps do AirPlay but the mirroring does not.

  • Problems with non-existent waveform cache...

    I previously posted this: +I cannot open Final Cut. I have an error saying 'The Waveform Cache Files Folder does not have read/write access. Please select a new folder in the System Settings Dialog or correct the problem on disk'. Final Cut then proc

  • Table source code

    pls sent to me table source coding.

  • XiSecurityRuntimePermission

    Attempting to apply message level security and encryption to an XI configuration for invocation of an external web services. Configuration for certificates and encryption has been completed, but we get the following error when testing the interface:

  • Sound Goes Up and Down in HP Envy m6-1105dx Laptop Beats

    Yes, Hello. I just bought a hp envy  m6-1105dx (windows 8) yesterday and as i was setting it up, I realized that the music volume in winamp got loud all of the sudden and they it went down again. It happens with every song. I downloaded the new sound