What presets and format for sharing is best to use on HD project?

I have been working on a Premiere Elements project for the past several weeks, and it is my first, obviously.  I have spent many hours on the phone with Adobe techs and every one has said something completely different and contrary to what i had been told before.
Several issues i have.
1.  No one seems to say the same as to what preset is best.  I have taken the pictures from files from Photoshop from my DSLR camera, so i used the preset of DSLR [email protected] which i assumed was the appropriate to get HD quality of photographs of a special vacation.  There have been suggestions that i use a HDV preset instead.  What would be the right preset?
2.   I completed the project, ending up with 45GB and planned to burn it to a blu ray disc.  As soon as i put in a disc and filled out the options, i went for a H.264 1920x108iNTS Dolby, and it said there was no media, in the share panel for burning the blu ray.
3.  Then i tried to burn it to a windows folder instead, and used MPEG2 102-x1080i30 because i want to maintain as much HD quality to the photos as i can.
And 5% into the download, a pop-up appeared saying i was running extremely low in memory, and to save and proceed cautiously.  If i used AVI i assumed that would be standard videos.  I have a HP p6320 Phenom II x 4 820 Processor 2.8 GH, with 8 GB of RAM.  I have a TB of hard disk space and use Windows 7.
so now i have what i think is a finished project, and don't know how to get it the blu ray or a way that i could eventually get it to a blu ray.  So near yet so far!!!!
4. The time to upload the project after rebooting etc. is taking longer and longer, now in the vicinity of 30-40 minutes.  What is causing this problem?
And i see 'Adobe Premier Elements 9 is not responding' more and more often, and the time with the swirling green circle  with 'wait for the program to respond' is becoming the regular occurrence rather than the odd happening.
What am i doing or what is going wrong?  Any suggestions would be appreciated.  Hopefully i have given enough information for some lights to go off?  Obviously i am a super novice, but i am getting very frustrated, with a project that started off being so much fun.  I would like to draw it to a conclusion!
Ron

You do not select what kind of file you output when you tell PreEl to write a DVD or BluRay folder on hard drive for later burning to disc... the DVD or BluRay format is part of the specification
Put a Hollywood DVD or BluRay in your computer drive (stop autoplay when it starts, you don't want to play the movie) and then use Windows Explorer to go LOOK at what is on the disc
When you tell PreEl to write your DVD or BluRay folder to your hard drive, you will have the same file structure and file types as a Hollywood disc
You then use Imgburn to write that entire file folder to disc

Similar Messages

  • What is the format  for  0calmonth2,0calquarter,0calweek,0calyear,0fiscper,

    what is the format  for  0calmonth2,0calquarter,0calweek,0calyear,0fiscper,0ficper3, 0halfyear1, 0weekday1

    Hi Dominic,
    0FISCPER is a NUMC 7 infoobject. And it takes your 003.200 seven symbols leaving the last symbol. Though, the output format is length of 8.
    A'm not sure if you are dealing with external format (in this case try to enter 0032005) or with internal (then try 2005003).
    Best regards,
    Eugene

  • I have an LG Revere 3-What is the format for ringtones?

    I have an LG Revere 3-What is the format for ringtones?

    Supported audio file format for LG Revere 3?
    I asked this question about a month ago and didn't get a satisfactory answer. It seems like the phone software has not been updated from the VN150S in order to support bluetooth transfer of custom audio files.

  • How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

    In Report Builder 3.0, I have the following custom code entered:
      Public Function SafeDivide(Numerator as String, Denominator as String) as String
    Try
    If Numerator = “” or Denominator = “” then
    Return “-“
    End if
    If Numerator = “-“ or Denominator = “-“ then
    Return “-“
    End If
    If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
    Return “-“
    End if
    If IsNothing(Numerator) or IsNothing(Denominator) then
    Return "-"
    End if
    Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
    Catch
    Return "-"
    End Try
    End Function
    I call the custom code in the cell with the following equation:
      =Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
    I have the format for the cell set to 0.00%, but it’s not being followed.
    I want the result to be formatted as a Percentage, but instead I get values like: 
    -78.9473684210
    80
    300
    -100
    I have the format for the cell set to 0.00%, but it’s not being followed.
    How do I do use the custom code and format for a percentage with 2 decimals?

    Hi AngP,
    After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
    compared.
    To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
    BackgroundColor:
    =iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
    If there are any other questions, please feel free to ask.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • HT204088 Does anyone know how to speak to customer service for iTunes? I got charged for something and have no clue what I got charged for. I have not used iTunes yet. There is no way on the apple site to get this resolved.

    Does anyone know how to speak to human being in customer service for iTunes? I got charged for something and have no clue what I got charged for. I have not used iTunes yet. I have spent a lot of time trying to get this resolved on the apple site and there just seems no way to do it. Thanks.

    iTunes Customer Service is an online service unless they feel they need to call you.
    iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

  • I own an iPod Classic.  In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod.  It used to work perfectly, but now for some reason, it doesnt convert properly!  When I play the video,

    I own an iPod Classic.  In iTunes, some podcast videos cant be played on teh iPod, so I set it to convert the video to the right format for the iPod.  It used to work perfectly, but now for some reason, it doesnt convert properly!  When I play the video, it is just a white screen, but the sound can be heard.  Can anyone help??????

    Your source video file is probably muxed.
    Neither QT Pro or iTunes has the ability to successfully encode a muxed video file with audio. You'll end up with video and no audio.
    See: iPod plays video but not audio of some exported files.
    You'll need to use some other third-party software to do the conversion. There's a handful of software available. Just search the forums and you'll find many titles mentioned.
    Try MPEG Streamclip.

  • I have 2 macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only loged in on her account. We both make regular time-machine back-ups each on a separate external disk

    I have 2 Macbooks each with an account for me and one for my wife. I use one Macbook logged in with my account and my wife uses the other Macbook only logged in on her account. We both make regular time-machine back-ups each on a separate external disk. Is it possible to update her account on my macbook using her external disk without overwriting my stuff on the same Macbook and vice versa?

    Time Machine does not do individual accounts. It records the complete drive. So if you were to use her TM backup on your Mac it would make your Mac just like hers. Both yours and her account on your MAC.
    Just copy the missing files over from her Mac to yours. If there are differennt programs on each then they would need to be installed on both.

  • What pacman and or AUR warpper/helper do you use and why?

    What pacman and or AUR warpper/helper do you use and why?
    Last edited by jrussell (2013-04-07 12:40:07)

    tomk wrote:
    None, because I don't need one.
    Just in case you meant to say "AUR wrapper/helper", I use cower.
    I forgot AUR, thanks

  • What is vofm transaction for which purpose it is used

    hi gurus
    can anyone suggest me
    what is vofm transaction for which purpose it is used
    in smartforms
    thanks&regards
    kals.

    Hi ,
    VOFM is the transaction where you can maintain Requirement routines, which are assigned through cusomization.
    To create a routine you need access key & routine no. starts with "9".for ex. 901,902 etc.
    one important thing to note that even if you have some syntax errors inside your routine, it will get activated without errors. So, you need to do Main Program check before activation.
    Refer to SAP Note no : 327220,381348,156230.
    what is VOFM transaction..
    Regards,
    Raj.

  • What format for my external drive allows use with Mac and Windows?

    I got an external hard disk (1 tr) and i want to used it for my windows and mac, i read i can have two partitions one for mac and one for windows, but i dont really want to have two parts, and I read i can format it by fat32 and i can write and read on both os, is that true?
    I want to use it for movies, os backups, and files..
    Is it true that i can only save files up to 4 GB when the format is fat32?
    please advise..

    It this case you would need to to go to "Disk Utility" on mac and select 3 partions which will be under the Parition Layout in my screen shot below. "Current" is grayed out that will drop down select 3 partitions and make one NTFS, second Mac OS Extended, third FAT32. Using the FAT32 for both Mac and Windows but the files have to be under 4GB each.

  • What is the process for sharing calenders and contacts via a company cell phone

    Hi
    how do you share Outlook calendars and contacts using a company cell phone...currently we are sharing using Outlook in the office using MS Exchange Server.
    do you have any suggestions?thank you!

    Don't know which phone do you use but if you configure your Exchange ActiSync Profile on your Phone there is an option for the CONTACTS. Basically Exchange account will pull the contacts from your profile.. I did test it on my iPhone 5 and works for mee
    Where Technology Meets Talent

  • Photos - What Resolution and Format?

    I've just got a 5G black Video iPod.
    I want to learn how to make the best use of it's photo capabilities.
    I'm quite techy and would like to understand what the iPod does with Photos for viewing on it's internal screen and/or for output to a TV. I understand that the iPod can make full quality copies of photos for archive/backup purposes. My questions are not about this particular function.
    MY QUESTIONS
    What's the ideal format for photos prior to importing into the iPod? (I'm guessing TIFF or similar uncompressed file format to avoid recompression artefacts as a result of the transfer to iPod)
    What image format is used by the iPod. JPEG?
    What's the minimum size (in pixels) for the source photos to still ensure maximum quality on the iPod.
    I believe that the 5G iPod screen is 320 x 240 pixels. What resolution is the TV video output?
    Does the iPod store 2 versions of each picture, one for it's own screen and one for the TV out?
    If 2 versions are stored then what resolution are these images?
    Is there any benefit in preparing images specifically for import to iPod to avoid any manipulation taking place during the import process?
    Thanks for any answers or any other useful info on these issues.
    Geoff

    Barb,
    Iv'e just spent the past 3 hours scanning these posts to see if there was an answer to my delima. I have a 5g 60g photo ipod that I purchased for the sole use of down loading and viewing photos. Among the numerous issues I have already- Ive just directly down loaded a batch of pics from my camera. In this batch was a variety of .JPG and .TIFF files. Only the .jpg pics show up on the ipod. The .tiff pics show up as squares with RAW in the description. I think from this post you are saying that the ipod will display many forms of pic files including .tiff format. Please tell me what to do to make these show up. I would hate to think I just dropped $300 plus to NOT be able to download and view these pictures. I shoot primarily in the .tiff mode Thanks for your help
    mac g4   Mac OS X (10.3.9)  

  • What other file format for IDVD project?

    hi I have edited hd video files which are Quicktime movies in m-peg2 1920x1080.  The files currently put me over the size limit to be able to burn a DVD. I don't want to leave any of the files of of the DVD.  My question is what's the next best conversion format I should use so that they all can fit onto my DVD.  in other words I want to convert to a smaller size using compressor to fit the idvd project.
    Thanks
    RD

    I advice you to use Brorsoft Video to iDVD Converter.
    With it, you can convert video to the best format for burning to iDVD on Mac OS X. iDVD only supports video or image files supported by QuickTime. You can use the tool to convert video to QuickTime MOV file.
    Trick:
    For best results, in the QuickTime export settings of your video editing application, choose NTSC-DV with a frame rate of 29.97 or PAL-DV with a frame rate of 25. Choose No Compression for audio, and set the sample rate to 48 kilohertz.
    Tips:
    1. You can drag a QuickTime movie file to the audio well in the Menu Info window or in the slideshow editor. iDVD uses the first audio track in the file as a soundtrack for the menu that is open or for the slideshow and ignores the video. For more information, see Related Topics below. 
    2. If you share an iMovie HD project as a QuickTime movie using the Full Quality option, iMovie HD doesn’t include chapter markers in the QuickTime movie.

  • What exact file format for exporting AVCHD to HDD of Sony HDR-SR12E (AVCHD) Handycam?

    When you are finished editing AVCHD files with Adobe Premiere Elements 11, what is the correct file format for exporting back to the hard drive of the Sony HDR-SR12E handycam?
    I used Sony Play Memories software to import AVCHD (.m2Ts) files at 1920x1080i PAL resolution. I tried rendering to several file formats after editing, but the files could not be exported in high definition back to the hard drive of the AVCHD camera. 
    I WAS able to import files from camera in Play Memories and then export them straight back to camera WITHOUT any editing, but of course you wouldn't bother doing this normally.
    I grew to love using Premiere Elements 10 for editing sd footage from my mini dv camera. However,  I've just purchased the AVCHD handycam and expect to receive my newly purchased copy of Premiere Elements 11 in a couple of days.
    Can anybody suggest the correct file format to produce for exporting AVCHD footage edited in PE11 originally captured on the Sony HDR-SR12E back to the camera?
    - Regards, Phil

    Phil
    Premiere Elements 10 has the Share/Tape (Record to DV). And, even that is for just DV, not HDV. There is no such choice in Premiere Elements 11 and 12.
    So, you are going to have to match up the properties of the original with Export settings and try to get the file exported onto the camera's hard drive if that is possible. Does the Sony user guide give instructions for how to import one of your video to its hard drive?
    The theory depends on how close you want the export of the edit to match the camera's original. There is no .m2ts file extension in any of the Publish+Share/Computer/AVCHD choices. If the .m2ts file extension is a must..
    One scheme to get a AVCHD.m2ts 1920 x 1080i25 for your camera's hard drive - lots of ifs
    1. Publish+Share/Disc/AVCHD and burn to folder using presets = H.264 1920 x 1080i PAL Dolby.
    (The preset cannot be customized so you will go with the Adobe bitrate.for the preset)
    2. Then go to the folder saved to the computer's hard drive, open the BDMV Folder, then the STREAM Folder of the BDMV Folder, and use the 00000.m2ts file there as your file destined for your camera's hard drive.
    If the hard drive will accept ..m2t, then you could use Publish+Share/Computer/AVCHD with Presets = M2T - H.264 1920 x 1080i25 and customize the export settings under the Advanced Tab/Video Tab and Audio Tab.
    Please review and then let us know if any of this works for you.
    Thanks.
    ATR

  • What is the format for a Client Request JMS message.

    I am trying to send directly to the JMS queue to start a WLI process. From the Workshop browser, the message is received. However, when sending my own JMS message, WebLogic complains with an "Unexpected message format" onMessageException.
    What is the correct format for a WLI Client Request node? A text message? Please help. Thanks - Frank.

    Kai,
    Thanks for the info. I have created a MB channel and a JMS event generator. But now it seems that my problem has simply been moved further out. Case in point: If I send a simple XML text message to the JMS event queue, the WebLogic JPD throws a MBConnectorException ("Could not determine channel type").
    So I am wondering if this is still not the best practice to accomplish what I want. Should I be using a MDB which then simply calls a JCX control that knows how to talk to the WLI start node? The whole idea is that I want to start the workflow with a simple JMS message.
    Thanks in advance,
    Frank

Maybe you are looking for