What privileges user should have to install and run weblogic on linux box

What privileges user should have to install and run weblogic on linux box ?

Hello.
Normal user if you don't want to listen to ip port < 1024 or write in protected directories (like /var).
Regards.

Similar Messages

  • User rights required to install and run netmon on windows 7

    What are minimal user rights required to install and run Netmon on Windows 7
    Senior IT Systems Administator

    You have to belong to the Netmon Users group.
    Thanks,
    Paul

  • Anyone have experience installing and running the Condor Engineer QPC-1553 PXI board

    Do anyone know how to installing and running the Condor Engineer QPC-1553 PXI board using their LabVIEW drivers?

    Hi CEY,
    as far as i know there are many documents with it.  Install it like every other hardware. To test it there is a program from Condor Engineer. To build your application, there are good example for BC, BM and RT.
    Mike
    Message Edited by MikeS81 on 02-19-2008 09:27 AM

  • Itunes was not installed properly.please reinstall itunes..error 7 (windows 14001) what is this.. have tried installing and repairing but nothing works..help please?

    Have this error and itunes will not work..very frustrating...anyone no whats wrong?

    Google is your friend for this error...

  • How to install and run weblogic on windows via Cygwin?

    As subject.

    What you're asking doesn't make sense. WebLogic runs fine on Windows. When on Windows, use the Windows-based interfaces for WebLogic.
    I've consistently been using Cygwin for many years, but it's important to understand that it is NOT an operating system. It's simply a port of several Unix-based applications and shells to the Windows API.
    That being said, there's nothing wrong with writing Cygwin-based scripts that interact with the WebLogic server running on a Windows box. Bash is certainly a better shell for scripting than Windows CMD scripts.
    If you have a more specific question, we might be able to answer it.

  • I have PS3 installed and running on an old macbook pro and am moving over to a new macbook air without disc drive. I pulled PS3 over by wifii but now want to uninstall it but the uninstaller isn't in the utilities folder and the original shows itself as a

    Any help with this would be appreciated

    Simply trash everything. You screwed yourself and made a mess, anyway. You need to install the program properly from scratch.
    Download CS3 products
    Mylenium

  • Today Apple retail unit sold me Airport Time Capsule. Now trying to install on my Mac which runs OSX10.6.8. Seems I should have newer OSX and Airport Utility version. What can I do please?

    Today Apple retail unit/shop in sold me Airport Time Capsule. Now trying to install on my 21 inch iMac which runs OSX10.6.8. Seems I should have newer OSX and also newer Airport Utility version (mine is 5.6.1). What can I do, please? So much looking forward to using Time Capsule. It is not at all readable on box. Now with a magnified glass I can just about make out the installation requirements printed in tiny print at the bottom/base of the box! I have tried software update etc etc and to download Airport Utility update from Apple website. This was unsuccessful because of OSX, I gathered. Appreciate any similar experience and how it was resolved. Thank you. Tr

    You need OS X 10.7.5 or later. Most likely you can upgrade OS X on your iMac. You already have 10.6.8 and access to the App Store. If your computer qualifies to run Mavericks, then that is what you would upgrade to, otherwise, you would upgrade to Lion.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mavericks, it may still meet the requirements to install Lion.
    You can purchase Lion at the Online Apple Store. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mavericks
    You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
    Upgrading to Mavericks
    To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
        OS X Mavericks- System Requirements
          Macs that can be upgraded to OS X Mavericks
             1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
             3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
             4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
             5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
             6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
             7. Xserve (Early 2009) - Model Identifier 3,1 or later
    To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.

  • HT1364 I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive.  What is the best way to install and move the itunes library to my C Drive?

    I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive.  What is the best way to install and move the itunes library to my C Drive?

    If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
    If it turns out you only have the media folder on the external drive then take a look at this post...
    tt2

  • I can not fint the texture files, which should have been installed with the CS6 and CC? why?

    I installed Photoshop CS6 a while back. Later on I discovered that the texture files where missing, or not included? Later I installed Photoshop CC, to see if the texture files were included here. But no, it was not. As far as I concern, I know that the texture files are included, and should have been installed, but they were not. Someone have any idea why?

    In Photoshop CC 2014, Filter Gallery opens the dialog below, and "Texture" is the last folder.

  • Error 1856 yeah tried re-install and running as admin still have that error

    yeah tried re-install and running as admin still have that error any Ideas?

    Good start.
    Only two things I did differently. I used a new admin account. I opened a .mov file freshly downloaded from Apple's web site.
    Log into a different account with admin privileges (create a new one if necessary)
    Download a .mov file and store it on the hard drive.
    Open the .mov file.
    Move that same file to a temp folder on hard drive and assign rights to problem user.
    Log off and log in as the troubled user.
    That same file should now open
    Try opening one of the files that could not open before.
    If that doesn't work,  (I didn't do this, it was on another Apple support forum post elsewhere)
    Fully uninstall QuickTime
    Download the K-lite Codec pack (I downloaded the full version here http://www.free-codecs.com/Klite_codec_packdownload.htm)
    Install it and accept its changes it will make
    Once K-lite is installed, now you can re-install QuickTime
    Try opening the file again
    G'luck.

  • I was updating i-tunes on my windows vista but it stopped working after that.Since then i have un-installed and re-installed it a dozen times but it shows the same error (Apple error:2

    Hi
    Recently I purchased Iphone 4-s and tried to connect it to my existing i-tunes but it didnt recognise the device. So I tried updating the I-tunes to see if it made a difference but it was no good.
    Hence i followed the trouble shooting and uninstalled and re-installed i-tunes but it wont get installed properly now. Since then I have un-installed and re-installed the complete set of i-tune softwares a dozen times but it still gives me the same error- Apple Error: 2 and Windows Error :2 and report of being unable to install the Apple Application Support software. I have spent 2 1/2 hours talking to the Apple Technical Support Team regarding this but it still hasnt been resolved.( In addition, i have ensured the firewalls are disabled and also opened new user account (admin priviledges) to try and download it)
    Now not only can i use my iphone but also my ipod is out of action in regards to music and downloads.
    I would really really really appreciate anyone helping me in this matter as i am in dire straits now.
    Thank you so much in advance
    Regards

    I also have this problem. I cannot open links from a discussion board I frequent nor can I open links from my email. Also after opening my email, I cannot go to any other sites except my home page. I can then go no where else.
    When I close Firefox and try to reopen it, it does nothing! I have to bring up the Task Manager and end the Firefox process before I can get back in.
    To the best of my knowledge, this problem started with the new update to Ver. 3.6.9. I am running Windows XP Media Center 2005

  • Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

    Please help me fix this problem it's driving me crazy. I have tried installing and reinstalling photoshop EXTENDED several time and each time i lunch it ask me for the serial number in which i entered it once entered nothing happens

    Hi Glenn,
    Kindly try out the steps mentioned in the link below and see if you are able to serialize your software.
    Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC
    Try Solution 2: Clean up cached user login information.
    Please share the results after performing the steps.
    Thanks,
    Atul Saini

  • I have a Mac os x 10.58. Please could someone illustrate exactly what settings I should have on my computer to make video calls with Skype?

    I have a mac OS X 10.58 Please could someone illustrate exactly what settings I should have on my computer to make video calls with Skype? Thanks.

    Then all you need is an external compatible webcam with your Mac Mini.  Skype is currently compatible with your Mac and operating system
    http://www.skype.com/intl/en-us/get-skype/on-your-computer/macosx/

  • I have Maverick installed and my mail, Safari, Mac App Store, and iMessages apps all say that they quit unexpectedly and will not open.  Any suggestions?

    I have Maverick installed and my mail, Safari, Mac App Store, and iMessages apps all say that they quit unexpectedly and will not open.  Any suggestions?
    Process:    
    Mail [605]
    Path:       
    /Applications/Mail.app/Contents/MacOS/Mail
    Identifier: 
    com.apple.mail
    Version:    
    7.2 (1874)
    Build Info: 
    Mail-1874000000000000~1
    Code Type:  
    X86-64 (Native)
    Parent Process:  launchd [164]
    Responsible:
    Mail [605]
    User ID:    
    501
    Date/Time:  
    2014-05-01 22:11:44.754 -0500
    OS Version: 
    Mac OS X 10.9.2 (13C64)
    Report Version:  11
    Anonymous UUID:  5D0F67F3-4D58-F054-66B6-24017FD68ADC
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
    VM Regions Near 0:

    I will check.  Can the security update be installed if you can no longer open the Mac App Store app?
    I was listening to the MacCast podcast and the host had a similar issue and did something similar to the link below.  I am concerned that I may mess something up by doing this.
    http://macs.about.com/od/usingyourmac/qt/Fix-Spod-How-To-Fix-A-Spinning-Pinwheel -Of-Death.htm

  • I downloaded Adobe Flash and I have not installed and I can't delete it! It asks me for a password

    I downloaded Adobe Flash Player and I have not installed and I can't delete it! It asks me for a password!What do I do?

    What is your operating system & version?
    What is the file name of your download?

Maybe you are looking for

  • How to set up two iPhones on same account in Find Friends

    I have tried to add a second iPhone5 to Find Friends, each time it tell me I can't send a request to myself.

  • After using Migration Assistant, printing crashes any app

    Hi Folks, I just recently added a new HD to my G4, installed Tiger 10.4.3 on it and successfully used the Migration Assistant to pull all my user info from the older HD that was running 10.3.9 Hurry for me, right? Well even all my printer info copied

  • Is apple ever going to agree to enable flash?

    there are so many in browser items that require adobe flash, but apple and adobe for some reason are not in agreement in the flash portion of the adobe programs... is there any news of if this is going to change? I severely dislike having to rely on

  • Workflow - Agent ID

    Hi all, Can anybody guide me through this scenario... I have activated the workflow for PO release. I have a 3 step release strategy. In the third step there are authorizations for 4 number of HOD's. In Workflow for object ID - USER, I can give only

  • Aperture 3.6 Uploads to Flickr only at 72 dpi, not 300 dpi. Why?

    Yesterday I upgraded to the new retina iMac (Yosemite 10.10) and updated Aperture to 3.6.  (Previous iMac had not been updated with Yosemite.) With previous setup, I was uploading to Flickr albums at 300 dpi. With new setup, photos upload at 72 dpi,