What problem could be in script

Hi,
I have a script which created in EN, but can be printed in DE, now I found if I first print in EN, then the payment terms will be correct, but if I first print in DE, then the payment terms second line will disppear, why it happened like this, how I solve it ?
thanks a lot!
kitty

Hi,
Apart from the above answers, there can be possibility that the DE version of SAP script may not have the correct code written for Payment terms. In the DE version of your form, there could have been changes made to not to display second line.
Please check.
Hope this helps.
Regards,
Shahu

Similar Messages

I have a IPad 3 and IPod Touch 4. When an IPhone 4 or 5 sends à photo on Inessage, it tells that the message nr could be delievered. But, the photo comes to my IPod but not My IPad 3. What problem could this be?

I have a IPad 3 and IPod Touch 4. When an IPhone 4 or 5 sends à photo on Inessage, it tells that the message nr could be delievered. But, the photo comes to my IPod but not My IPad 3. What problem could this be?
Can it be some problems with the WiFi?

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Hello I just bought my new iphone4s but theres a problem sending pictures on imessage , also cheked with my friends on the settings and has the same , what problem could be

the problem still has no solution I have great coverage and also i can send and receive on imessage but i can receive pictures but cant send them what can be the issue

Here is a great apple article for troubleshooting message issues.

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

On my Mac Mini, I keep getting this error message: "iCloud encountered an error while trying to connect to the server". I don't have any problems with iCloud on my laptop / PC. It works fine... Does anyone know what the problem could be?

Your Mac must be on Lion (10.7) to run iCloud. Apple had to change the operating system to fully support it. Nevertheless, it is possible to get emails from iCloud without having Lion. Please tell me if this interests you.
Anyways, here is the link to buy Lion (30 dollars, totally worth the upgrade ): http://itunes.apple.com/be/app/os-x-lion/id444303913?mt=12
Franklin

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

My magic mouse behaves erratically with intermittent problems - slows down, right click doesn't work, disconnects for a few seconds then reconnects. Anyone suggest what I could do to fix this?

I just figured out the print quality issue for my wife with her new iMac and new printer.
She replaced both at once and she couldn't understand why her Artisan 730 was lower quality then her Epson R280 when they had the same specs.
Turns out the newer printer had the option to connect via wifi which we used during setup.
The driver options are completely different depending on how you connect.
Once I connected via USB the correct options were available and the print quality was better.
Looking at the R2400 it dies not have wifi, but while researching the problem for my wife someone esle was having an issue updating to the latest printer driver.
If you go into the print utility from the Printer and Scanner system preference and under the general tab you should have driver 5.5.
One user had to delete the old printer driver before Software Update loaded the newer printer driver.
https://discussions.apple.com/message/15947486#15947486
On my MacBook Pro (w Snow Leopard) I always had to reconnect my wifi at home when it woke up. I upgraded my router from an old Netgear to a newer N D-Link and stopped having to do that.
I would be surprised you would have that problem with an Airport Extreme, you might check to see if there is a firmware update for it.

I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences I-Photo. Does anyone know what the problem could be?

I have a 13" macbook from 2009 and for some reason can no longer change my desktop image by just clicking on an image in system prererences>I-Photo. Does anyone know what the problem could be?

Your Desktop Picture settings and Dock items are stored in the files
/Users/your short user name/Library/Preferences/com.apple.desktop.plist and
/Users/your short user name/Library/Preferences/com.apple.dock.plist
in the "Preferences" folder in your user library. This looks like the system has trouble to write to these files. Check the permissions on your user library and remove the above files from your user library, then log off and on again.
Your user library is hidden in Lion and Mt. Lion. To reveal it, use the Finder's "Go" menu. Select "Go" in the Finder's main menu bar and hold down the alt/option key, until you see the "Library" in the drop-down menu. Double click it to open a Finder window, so you can browse the files inside.
Regards
Léonie

How to check if home directories are disabled & what else could cause this problem?

We're having this issue with our server where some clients are having an extended authorization time to log onto our server, whether they attempt to do so via VPN or on our Network directly. This issue only seems to persist for some users and happens every time they attempt to log on. Log on can take up to 10 minutes, however, rarely ever fails.
I was told to check size of the home directories but the other IT here said he's pretty sure he disabled the home directory things. The only reason we have these servers is so that people can dump files on them for later use or to transfer between eachother for whichever project they may be working on. How do I check whether the home directories are enabled or not, and if they are, where can I determine their size? All I am seeing in the filesystem is the login for the Admin account and the other IT's account on the server.
What else could be causing this problem? It is not a machine-based problem as I can log into the server using their machine almost instantaneously. About half of our users are logged on instantly as well. We've been getting complaints about this for about a couple months now. It didn't seem to happen prior to February (though I can't say for sure because I started here at the end of January).
The server is an Xserve running 10.5.x or 10.6.x (two different servers). Computers being used range from Mac OS 10.7-10.9.2. I don't believe anyone uses windows that is having an issue.

What you need is the dba_policies
select OBJECT_NAME, POLICY_NAME, ENABLE from dba_policies;

I keep getting the beachball icon in illustrator cc 2014 when selecting scans. Does anyone know what the problem could be?

I keep getting the beachball icon in illustrator cc 2014 when selecting scans. Does anyone know what the problem could be?

Hiya,
Many thanks for this, but it doesn't happen upon start-up, it happens when i select scans on the pasteboard. The programme always starts up fine, it's when i start try and use the program when the problems start.

HT3529 i just created my apple id and i tried to sign in on iMessage but it keeps saying that its already in use,however this is the first time that i'm using my apple id to sign in on any device,what the problem could be?

I just created my apple id and i tried to sign in on imessage but it keeps saying that it is already in use however this is the first time that i'm using my apple id to sign in on any device,what the problem could be?

You must create the account using an Apple device, a Mac (Lion or greater) or an IOS device (IOS5 or greater). Having done that you will be able to sign in from your Windows machine.
FYI, iCal is an application that can display calendars from iCloud (and others) it is not a calendar itself, merely a calendar client. In Windows Outlook is the calendar client.

Updated iphone 3gs to os5, now it says sim card not installed, any one know what the problem could be please

updated iphone 3gs to os5, now it says sim card not installed, any one know what the problem could be please

well... actually you are right dahveed, i had a dodgy copy of galaxy on fire 2 (boring game), that's what was giving me the issue. i followed your posts about the MAS etc., and discovered this was the problem. Corrected. You're a knowledgable man, thank you

HT201335 i have a 2013 model macbook pro and apple tv generation 3 . both connected to the same wifi , still no airplay mirroring icon or in my display setting . what els could be the problem

have a 2013 model macbook pro and apple tv generation 3 . both connected to the same wifi , still no airplay mirroring icon or in my display setting . what els could be the problem

Welcome to Apple Support Communities
Read > http://support.apple.com/kb/HT5404 Do you see the AirPlay icon on the menu bar? If not, restart the router

Time machine: An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.

Time machine backups are failing. I've followed the instructions I found on the Time Machine troubleshooting page (http://pondini.org/TM/Troubleshooting.html) but have gotten to where I don't know what to do next.
Sequence of events:
The main error message is always:
An error occurred while copying files. The problem could be temporary. If the problem persists, use Disk Utility to repair your backup disk.
Yesterday, I opened Disk Utility and verified the disk. Got this error:
Error: This disk needs to be repaired using the Recovery HD. Restart your computer, holding down the Command key and the R key until you see the Apple logo. When the OS X Utilities window appears, choose Disk Utility.
I ran Disk Utility and repaired the hard drive. Then I manually started the backup before going to bed, figuring it was going to take a long time to run. When I got up this morning, the backup had failed with the same "could be temporary" error. I checked the log, which says:
Starting manual backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:17
Error: (5) setxattr for key:com.apple.backupd.SnapshotState path:/Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/ABB10CF2-F041-4DE5-B6AE-3C228B59ADCC size:2
Deep event scan at path:/ reason:must scan subdirs|new event db|
Finished scan
Found 145601 files (11.88 GB) needing backup
16.1 GB required (including padding), 620.77 GB available
Copied Zero KB of 11.88 GB, 0 of 145601 items
Copied 0 files (Zero KB) from volume Macintosh HD.
Copy stage failed with error:11
Backup failed with error: 11
Ejected Time Machine disk image: /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle
Ejected Time Machine network volume.
Starting automatic backup
Attempting to mount network destination URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Mounted network destination at mount point: /Volumes/Tery Griffin's Time Capsule using URL: afp://Tery%20Griffin;[email protected]/Tery%20Griffin's%20Time%20Ca psule
Disk image /Volumes/Tery Griffin's Time Capsule/Tery Griffin’s Computer (44).sparsebundle mounted at: /Volumes/Time Machine Backups
Backing up to: /Volumes/Time Machine Backups/Backups.backupdb
Event store UUIDs don't match for volume: Macintosh HD
Error: (-36) Applying backup protections to /Volumes/Time Machine Backups/Backups.backupdb/Tery Griffin‚Äôs Computer (44)/2014-03-05-201742.inProgress/9F8E7957-9C50-49C3-8314-880E5203E3D9
Error: (5) setxattr for key:com.apple.backupd.SnapshotStartDate path:/Volumes/Time Machine Backups/
Does anyone know what the problem is here and what I should do?
Thanks,
Tery

You have repaired your boot drive (which is good) but have you repaired your time machine drive? I don't own a Time Capsule so I don't know if disk utility can operate on it. If it can, you should repair it as well. You may need to erase it and start a new backup. That happens to time machine volumes from time to time and is why people who are serious about their data never rely on a single source of backup.

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

Since I upgrade to Lion OS my optical drive stop working can't read or write at all I did what I could to fix it but still not working , any help please

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

What's Wrong With This Script

A couple of years ago I was using an AppleScript file (thanks to someone else's assistance) but it no longer works.
I have an extra internal drive, that is partitioned, and used for sequential daily backups. When the computer starts up, of course all the drives mount - but I prefer that they are off the desktop until neded.
Rather than selecting the volumes and then dragging to the Trash, I found it easier to have a script run at startup which then asks if the drives should be unmounted.
Things were great - until I upgraded to Tiger.
I am hoping that someone can tell me what's wrong with the script so that I can start using it again. As you can probably tell, I don't have any experience in AppleScript. At the moment the script runs - it presents the dialogue box - and then just ends after a response, but the drives do not unmount.
The partitions on the drive are called Monday Tuesday Wednesday Thursday Saturday
The existing script is as follows:
on run
display dialog "Unmount All Backup Drives?" buttons {"Yes", "No"} default button 1
set x to button returned of result
if x is "Yes" then tell application "Finder" to eject "Monday"
end run

This relates to another (current) thread in AppleScript discussions.
Your script works with Panther as that operating system allows INTERNAL drives to be "ejected" (and, if you eject one volume on a partitioned drive, all the volumes on that drive are ejected -- this explains why ejecting "Monday" actually ejected Monday through Friday).
With Tiger, you would find that your script works exactly as expected with EXTERNAL drives, but INTERNAL drives need a different approach.
To get behavior exactly as you had before, try this script:
--BEGINNING
display dialog "Unmount All Backup Drives?" buttons {"Yes", "No"} default button 1
set x to button returned of result
if x is "Yes" then set driveName to "Monday"
set driveInfo to do shell script "diskutil list | grep \"" & driveName & "\""
set driveID to last word of driveInfo
do shell script "diskutil unmountDisk " & driveID & ""
--END
For reasons that aren't entirely clear to me, this approach, while it works reliably, is very slow -- on my fast machine, the unmount process takes nearly 20 seconds. (Using UNIX directly in Terminal, with the same command, is very quick.) (In the AS, the delay occurs in second "do shell script.")
Another puzzle that has cropped up is described in the related thread "Applescript to Mount/Unmount a Disk . . ." (current). While the above approach works for Justin Surpless, it often prompts for a password -- unacceptable in his application. I've not seen this on my PPC (and I tried 10.4.7, which he's using); his may be an Intel Mac, if that could be the difference.

FCP 7 and FCP-X on same partition: what problems are caused?

I'm trying to figure out if the performance issues I'm having with FCP-X can be remedied, or if the problem is just buggy software. Apparently, even a newer, faster, more powerful Mac is not the answer, as I read complaints from people with new, suped-up Mac Pros who say the software slows to a crawl. Sounds familiar to me, but I'm on iMacs and a MacBook Pro -- all my Macs are 3-4 years old, and are from that Core 2 Duo era, not Quad Core processors. All my Macs are maxed out at 4 GB or RAM. So I'm certain new machines are in my future. But judging from what some people say about their newer, faster machines, I'm not entirely convinced that it would solve the problem I'm having with FCP-X.
There are numerous threads here reporting sluggish performance (perpetual spinning beach balls) relating to a memory leak or a problem relating to FCP-X's usage of memory (some say it happens worse in Lion). Is that the problem? And if it is, why hasn't Apple addressed it?
Then there is this matter of having FCP-7 (FCP Studio) and FCP-X installed on the same partition. Apple's "Best Practices" article clearly states that it's best to have the two applications installed on separate partitions. Only problem (for me) is, I already had FCP-7 installed on the primary partition. When I purchased FCP-X (the day it first became available), I hadn't read that article, so naturally, the software got installed...you guessed it...on the primary partition. And yes, I could uninstall FCP-7 (FCP Studio), create a new partition, and then re-install it. But I remember how long it took to install FCP Studio (about 4 hours, as I recall), so I've put off the ordeal of heading down that road.
So I'm wondering.......
What problems are known to occur as a result of having FCP-7 and FCP-X installed on the same partition? Would my sluggish performance be related to this? Or would going to the trouble of uninstalling FCP-7, re-partitioning, then re-installing FCP-7 (FCP Studio) into its own play space, only be a waste of time?
What evidence is there that this co-install is the culprit causing sluggish performance?
What ARE the problems that the co-install causes? I've never heard anyone address this specifically.

When FCP X first came out, Apple recommended keeping FCS 3 on a separate partition, so I did that.
Recently I did a clean reinstall or Lion and installed FCS 3 as normal, followed by FCP X 10.0.3.
During the FCP X install, FCP 7 was moved to a new folder called Final Cut Studio.
'Studio' and FCP X now work happily on the same partition - but I have not tried opening both at the same time!
Just now, both applications are the most stable they have ever been.
These are my standard tips for improving performance:
First, check the spec of your iMac against the system requirements:
http://www.apple.com/finalcutpro/specs/
Particularly your graphics card. If it's listed here, it's not suitable:
http://support.apple.com/kb/HT4664
If you are getting crashes, there is some conflict on the OS. Create a new (admin) user account on your system and use FCP X from there - if it runs a lot better, there's a conflict and a clean install would be recommended.
Other ways to improve performance:
Keep projects to 20 mins or less. If you have a long project, work on 20 min sections then paste these into a final project for export.
Create Optimised media - most camera native files are highly compressed and need a great deal of processor power to play back - particularly if you add titles, filters or effects. ProRes 422 takes up much more hard drive space but is very lightly compressed. It edits and plays back superbly.
Hide Waveforms at all times when you don't need them (both in Browser and Storyline / Timeline). They take up a lot of processor power.
Create folders in the Project and Events libraries and put any projects you are not working on currently, in those folders. This will help a lot.
Move your Projects and Events to an external HD (make sure it's formatted OS Extended - with journaled on or off) and run from there.
Contrary to what Ian said above, the biggest single improvement I saw in performance was when I upgraded the RAM from 8 GB to 16.
Andy

What problem could be in script

Similar Messages

Maybe you are looking for