What procedures do you use in your organisation for requirements analysis..

What procedures do you use in your organisation for requirements analysis, quality management and change control for your custom abap development?
which process do you think work best for each stage\phase? is there are sap recommended process for each of these phases?
thanks
Bijo

ezzetabi wrote:I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
I never saw this particular font, but I second that, fonts is the only thing MS do well imo
And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
Of course if you do not use the terminal this post is not for you.
terminus

Similar Messages

  • What font do you use in your terminal emulator?

    I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
    And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
    Of course if you do not use the terminal this post is not for you.
    Last edited by ezzetabi (2007-09-20 10:36:52)

    ezzetabi wrote:I was using terminus, but I found it too thin for my tastes (or maybe for my bad eyes...) so I sought around and I read many persons like the Microsoft's Consolas and I have to say that it is indeed very nice. Probably MS should stop doing OSes and start drawings fonts only...
    I never saw this particular font, but I second that, fonts is the only thing MS do well imo
    And so I wondered, what do you use? IMO a terminal font should be, readable, monospaced (doh) and a little thick.
    Of course if you do not use the terminal this post is not for you.
    terminus

  • What CPU are you using on your board?

    Hi there,
    I like to know what CPU you are using at this time.....
    Just to see what AMD's are used....
    Bas.

    Quote
    Originally posted by hardwareman
    hi there bas,,
    I voted for my first AMD XP 2000+  )
    and am using the msi KT3Ultra-ARU  8)
    greatings!!
    Hey man ..
     Im runing a KT3Ultra-ARU also .. and I just picked up an AMD XP 2000+ at a Comp show .. and Im haveing a real hard time getting it to run on my mobo ..
     I'm haveing trubble at boot , if I get past that I loose my video ...and if I make it past that I get windows to run for only about 20 seconds ..
    can anyone offer any advise ..?
     

  • What settings do you use on your X-Fi?

    EAX: On, Effects: 0.0dB, DSP: None CMSS3D: Off Crystalizer: Off SVM: Off EQ: Off

    well u can go right ahead and turn off that EAX in console, its in no way connected to the EAX in your games, as u said games produce sound through api's in their engines. better look at Alchemy for EAX support in games cuz thats where it is. and ye CMSS3D wont do anything for you since its designed to give additional functionality in surround not stereo systems. and for EQ i tell u to go right and experiment, there is no system that cant use a lil fine tuning to adjust it to your music style, room or just your hearing, we all hear lil diferent.
    anyway for reference what "good" speakers are u using?
    i got X-Fi Titanium PCI-e over DTS connect to Z-5500
    EAX: off? CMSS3D: Stereo surround 50%? Crystalizer: rarely ~30%? SMV: off? EQ: attachment
    tbh i assumed wrong, u really have no need for any of the X-Fi functions but if your speakers are at least decent i guarantee u can get more out of them with a proper EQ... and dont read guides how to set up something that is based on personal expirience, there is no "THE RIGHT WAY TO DO IT", try and see what fits you.

  • What Monitor Do You Use With Your Macbook Pro

    I was looking into purchasing a new monitor for my Macbook Pro. It is an older one, 15" 2.5 GHz. I was going to bite the bullet and get the Apple 24" LED one knowing it is a great monitor overlooking that price is almost double of other monitors. But looking at the compatibility, I have to get a $150 adapter which I think puts me over the price hit.
    Just wondering what monitor/displays is everyone using that don't require a $150 adapter?

    Go to Apple menu -> About This Mac -> More info and tell us your Machine ID.  This will say MacBook Pro x,y.  It is those x,y values we need to know.

  • What display do you use with your 2005 Mac mini?

    Hi all,
    I was wondering which displays people are using with their 2005 Mac minis and
    which (if any) adapters are necessary?
    Thanks!
    Mike

    I'm using a Magnavox 15" LCD TV via it's VGA input on my day one mini. The original 2005 minis have a full sized normal DVI output and came with a DVI to VGA adapter. If yours no longer has that, it's the only adapter you'd need for most common computer monitors. Many newer monitors come with DVI already, so no adapter would be needed.

  • What screen do you use, with your MBP?

    Hiya,
    im lookin for more screen real estate. what do you guys use? im kind of eyen' the Acds...???
    Thanks.

    I have been using a 23-inch Apple Cinema Display for two years now, and I have loved every minute of it!
    I have never had any problems at all, and I have had the monitor running solid for those two years.
    Before my Apple Cinema Display, I had tried displays from Dell and Samsung, both of which had to be returned due to defects.
    In the studio, I connect my MacBook Pro to a Sharp Aquos TV, which has always performed exceptionally well too.
    Good luck!

  • I'd like to get your opinion: POLL: What font do you use?

    People,
    I am curious to know what font you guys use for text in your various corporate projects? I'v used Helvetica for years, as it is corporate and clean, but I am looking for others.
    POLL: What font do you use - let's say for corporate brochure/annual reports texts?

    Jack,
    You may also have a look at some of the font talks in the Typography forum, or start a thread there; among the latest was this one: http://www.adobeforums.com/webx?128@@.ef602ce.59b709a5
    Obviously, the wrapping should fit the contents.
    When all is said, I still prefer the fairest font.

  • What launcher are you using?

    What launcher are you using with your Z2? 
    I'm on Nova Launcher Prime with HERAcon theme and icons.

    Apex Launcher

  • After upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the   mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in or

    After yesterday upgrading from Mavericks to Yosemite I can no longer find in Mail the icon (looks like the Add To Contacts icon without the + mark) I used to press in order to obtain an e-mail address from my contact list. What procedure should I use now in order to quickly add an address to an e-mail that I wish to send?
    Bob

    On the right of the To: field you will see a circled plus sign:
    Click it.

  • Could you please tell what is encryption mechanism used in Release Management for storing any password

    Could you please tell what is encryption mechanism  used in Release Management for storing any password

    Hi  y e ll e sh,
    I am trying to involve someone to further look at your question. There might be some time delay. You can also check replies for the similar question in this
    thread. Appreciate your patience and thanks for your understanding.
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • What CMS do you use?

    Hey guys, I'm the product manager for Oracle Content Marketing. We have integrations into Eloqua and open-source CMSs such a Wordpress, but we're also looking to integrate with other commercial CMSs. What CMSs do you use to manage your websites? Feel free to post general thoughts (or questions) about integrations between Content Marketing and CMSs in general. Love to hear what you think, thanks!

    Hi James,
    I had built an integration between Sitecore and Eloqua and posted some info on the AppCloud.
    Sitecore CMS
    You can also check out the PowerHour done sometime ago: Power Hour: Sitecore and Eloqua: How to get the best of both worlds - YouTube
    On a side note, the principles used can be applied to virtually any new generation Web CMS.

  • What tools do you use for automating builds?

    Hi all Build Engineers,
    what systems do you use for automating builds - do you use your own tools, or some opensource project?
    If it is something public, which one it is, and what were the reasons to chose it?
    We are thinking about using the Hudson system (http://hudson.dev.java.net/) for our developers, but would like to hear from other RE groups about their experiences too.
    Thanks,
    Karel

    Tinderbox is another build monitoring tool. It does not show detailed steps of a build cycle. It only shows the final result : success or failed. But it can display build output for multiple platforms on the same page.
    This is how the tinderbox build grid will look --> http://tinderbox.mozilla.org/showbuilds.cgi?tree=SeaMonkey
    Detail Info -->
    http://www.mozilla.org/tinderbox.html
    Tinderbox can be connected to Bonsai -->
    It is a tool that shows you who checked in what, lets you perform queries on the contents of a CVS archive; get a list of checkins, see what checkins have been made by a whom, or on a given CVS branch, or in a particular time period.
    Detail Info -->
    http://www.mozilla.org/bonsai.html

  • What happens with you turn off your old iphone?

    Silly question..... but what happens when you turn off your old iphone?
    Does it basicly work like an ipod?  Can you play games, message if your on wifi?  
    Thoughts?

    Using an iPhone without a wireless service plan

  • What Classes do you use for developing Database Applications

    Hi ! (sorry for my bad english)
    I develop now an application for production planning and I use an informix database-server. I have no problems with the database an the connection. I,m a database expert, but I,m a newcommer in java. What classes do you use to develop a database application ? (specially Table Handling) I tried it with JTable and AbstractTableModel. Are there better possibilities ?
    JdbTable OR
    JTable with DBTableModel OR
    JTable with DBTableModel and DataSet
    I know that this is a big question, but some little Informations can help me. (I develop with JBuilder Proffessional)
    Thank you for your help.
    Wolfgang

    No - the classes you have described (AbstractTableModel etc) are Swing classes - that is, they are Models in the MVC GUI architecture. Database-related stuff (SQL at any rate) is contained in the packages java.sql and javax.sql - The latter is part of the Enterprise addition. You would also need to purchase a database driver (or use the sun one, which is something like com.sun.odbc.jdbc.Driver or whatever). The driver supplies you with connections to the database (java.sql.Connection).
    Alternatively, you may be deploying code in a J2EE AppServer (eg. WebLogic, WebSphere etc) in which case you can use the JNDI to get a javax.sql.DataSource object (by setting one up in the AppServer and doing a lookup on it) and use this to get database Connections.
      Class c = Class.forName("com.sybase.jdbc2.jdbc.SybDriver");
      SybDriver sybDriver = (SybDriver) c.newInstance();
      java.sql.DriverManager.registerDriver((Driver) sybDriver);
      //then use Driver object to get hold of a Connection
      //or alternatively using DataSources
      InitialContext ctx = new InitialContext();
      DataSource ds = (DataSource) ctx.lookup("jdbc/MyDriver");
      Connection conn = null;
      try{
        Connection conn = ds.getConnection("login", "password");
        Statement stmt = conn.createStatement();
        ResultSet rs = stmt.executeQuery("select * from MY_TABLE");
        while (rs.next()) {
          //columns are enumerated 1...n
          String s = rs.getString(1);
          //or can get by Col Name
          String str = rs.getString("name_col");
      } finally {
        conn.close();
      }Anyway, I hope this helps - you'll probably need to get a book on it (Java Enterprise by O'Reilly is a good one)

Maybe you are looking for

  • Downloading files FROM a database

    I'm stuck with a problem I used a <input type=file .../> tag to add my file into the database first i converted it into a byte[] and now it seems good stocked in my SQL Server database... The point is how to get it on my harddisk now ?? how can i do

  • Daisy Chaining 7937Gs

    Our Corporate Real Estate Department just purchased an AV system which came with Polycom SoundStation IP7000 Speakerphones and a Multi-Interface Module. The Module allows daisy chaining IP 7000's, adds single HDX digital mic or add aux I/O ports. Inc

  • How can I transfer hi8 to a computer not having a firewire connector?

    When I lost my Windows XP system I bought another computer having Windows 8.1. I have analog cassettes in Hi8 that I want to transfer to my new computer. I learned, afterwards, that my new computer didn't include fire wire. I am still hoping to use m

  • RPC Style webservice

    Hi Experts, Could you please tell how to create RPC Style webservice from XI or SAP R/3 System? Regards Sara

  • Ink Level Check GONE!

    Photosmart 7150 --  FINALLY got it to work in Windows 7 Home Premium (64Bit)  And THAT was way more of a struggle than it should have been! I realize the HP "toolbox" is too ancient to even open in Win7 (it was from Windows 98, no?) but there has to