What procedures need followed to change to new ipod?

I have used and enjoyed my third gen 30 gig ipod for 5 years now, but feel its time to move on and get an 80 gig classic.
is is just a case now of docking the classic and letting it load everything up? or, as i suspect, i need to do something to tell itunes that the classic is my new ipod, or else it will think i am doing something illegal and wipe my entire itunes library out.
how do i let itunes know that the old 30 gig one is no more and the new 80 gig one is the one to use from now on?
also, if i dont have to do that, can i keep both ipods synced to the same library and update both from the same itunes? that way i always would have two ipods to choose from, one for work one for play etc. but both would have the same songs on them?

You most certainly can keep your old & new iPods synced to the same library. At one point in time, a couple of months ago, I had my Classic, a shuffle, & a video iPod synced with my library, no problems. With your Classic, simply dock it to iTunes, register it, & let iTunes do the rest.

Similar Messages

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

What steps need follow in OWB after changing SERVICE_NAME in RAC

Hi,
Due to some reason we are planning to change the SERVICE_NAME in the RAC environment. We have deployed near about 500 mapping and 10 process flows with the old SERVICE_NAME.Using OMBALTER LOCATION "LOCATION_NAME" SET PROPERTIES(SERVICE_NAME) VALUES ("NEW_SERVICE_NAME")
if we change the SERVICE_NAME to new one what are all the impacts.
1. Whether all mapping and process flows will become invalid?
2. Whether we need to re-deploy all mapping and process flows?
3. What procedure we need to follow?
Oracle DB version 10.2.0.4 and OWB version 10.2.0.4
Regards,
Murali

Hi Murali,
how did you specify address of target database during creating OWB repository (as SQL*Net string or with host/port/service name notation)?
Using OMBALTER LOCATION "LOCATION_NAME" SET PROPERTIES(SERVICE_NAME) VALUES ("NEW_SERVICE_NAME")You won't change locations address in this way (because location is already registered).
Again - how did created locations (with SQL*Net string or with host/port/service name notation)?
Anyway try to look at metalink note 434272.1 "How To Update Warehouse Builder After A Database Cloning" (this note contains reference to utility for changing location address in form host/port/service)
Regards,
Oleg

Server error - what setting needs to be changed?

I have the problem posted below, that apple.com acknowledges, but there is no specific information on how to fix it. My server company does not know which setting needs to be changed. Can anyone help? My webpage has had no problems for many months--this just happened out of the blue.
Some web servers may display an error on a website created in iWeb:
"Parse error: parse error, unexpected T_STRING in filename.html on line 1."
The settings on some web servers may cause difficulty parsing the line in a published iWeb document that establishes XML compliance. If you get this error message on your published website, please contact the administrator of your web server.
This issue does not occur on sites published to .Mac.

See this note for fixes:
http://homepage.mac.com/thgewecke/parsingerror.html

My server is displaying an error - what setting needs to be changed?

I have the problem posted below, that apple.com acknowledges, but there is no specific information on how to fix it. My server company does not know which setting needs to be changed. Can anyone help? This happened suddenly, and I did not even change anything about my webpage.
Some web servers may display an error on a website created in iWeb:
"Parse error: parse error, unexpected T_STRING in [filename].html on line 1."
The settings on some web servers may cause difficulty parsing the line in a published iWeb document that establishes XML compliance. If you get this error message on your published website, please contact the administrator of your web server.
This issue does not occur on sites published to .Mac.

See this thread:
http://discussions.apple.com/thread.jspa?threadID=1374430&tstart=0

What will happen when I plug my new iPod in?

I got a new iPod video and I had an iPod mini before, if I plug in my new iPod, will it erase my library on my computer? If it does erase my library, how can I transfer my music from my old ipod to my new one?

No, it won't erase your library on your computer if you connect a new iPod. Rather, it will ask you if you want to associate the new iPod with this library. Click 'yes' and it will load your iPod with that music.
CHeers!
Bryan

Can't print directly from web pages anymore-what setting needs to be changed?

After doing a recent update for the printer, the program jammed up and I was forced to uninstall then reinstall the printer. Since doing so, whenever I want to print a doc from a website, I right click to print, and a save page comes up-forcing me to save the document somewhere before I can print. I save to desktop, then can print from there. This is an extra step I never had to do before-could always print from the page. What setting do I need to change?

derbydoodle
Welcome to the HP Community Forum.
It sounds like the printer is not the "Default".
Print to Printer without First Saving to File
Not nearly as common, slightly possible, is that your browser is not picking up a properly set default printer setting.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

When on=line banking, or checking my cell phone bill, I can't download my statement or phone bill, the page will pop up, but will remain blank. No problem with I.E. What setting needs to be changed???

When I'm on a secure site, like my bank, or my cell phone account, I can't download my bank statement or cell phone bill. If I click on my bank statement, it will take me to a page with the list of my statement months. When I click on a month, another page will appear that says "about blank", but then nothing appears on the page. I'm guess it's a security setting, or a proxie setting, but I don't know which, or what to change it too. Help?? If I use I.E. (which I hate to use) everything works okay. Same problem if I try and download my cell phone bill from Verizon. Thanks

Thanks for your help firstly.
No I don't have any firewall that I know of that could affect the Desktop app. I have reviewed the link you sent across and the results are as follows:
1. Make sure you can connect to the internet.
Yes, internet is all good... no problems here.
2. Make sure that you can access secure sites:
Yes, I can access secure sites as tested by the example in the list (https://www.adobe.com).
3. Check your hosts file.
Test successful after going to: https://lm.licenses.adobe.com
Moving on to reset the hosts file...
I've followed the instructions and I get to "Select the hosts file and open it".
If I simply double click, then the default is to open in TextEdit.
Once open, I go to find File > Save As, but it only says, "Save a Duplicate" and then once I save a duplicate, I don't know where to save it because the Save window only shows the basic folders and I don't know how to get back into the /etc folder from the Private files.
More instructions please, if possible?
Thanks again

What setting need to be changed to see full horizontal list?

I was trying to write a simple list with lot of headings.
For example:
WRITE: /6 'TitleA', 29 'TitleB', 55 'TitleC', 80 'TitleD', 106 'TitleE',
131 'TitleF', 157 'TitleG', 172 'TitleH', 198 'TitleI'.
I could not see the list titles after a particular length. Where can I adjust the settings so that I should be able to see these titles of simple list by dragging horizontal scroll bar to the right?
Thanks.

You need to specify your line-size big enough so that the line is not trucated.
REPORT Zrich_0001
       <b>line-size 255</b>
       line-count 65
       no standard page heading.
Regard,
Rich Heilman

What settings needs to be changed in IE to allow ActiveX Printing?

Hi, Our users are using IE7 to print report. Their preferences for Crystal reports has ActiveX printing selected. When they click on printer icon for a opened crystal report then they get a error message like
One or more ActiveX controls could not be displayed because either:
1) Your current security settings prohibit running ActiveX controls on this page, or
2) You have blocked a publisher of one of the controls
As a result, the page may not diisplayed correctly.
and We are not able to print. I tried adding our web site in trusted ones and allowed pop-ups but that did not work.
We are on BOXI R2 SP3 on IIS.
Thanks,

Hi Kalpesh,
I faced same issue while executing a custom transaction in GUI.
Error like
One or more ActiveX controls could not be displayed because either:
1) Your current security settings prohibit running ActiveX controls on this page, or
2) You have blocked a publisher of one of the controls
As a result, the page may not displayed correctly.
Please let me know how to fix this as this is running in gui.
Thanks & Regards,
Durgaprasad

What settings need to be changed so logos (.png or .jpg) and other objects in the email (body_part_0.html or body_part_1.vcf) appear in the email in lieu of att

We have several computers that receive email via Thunderbird. Two individuals received that exact same email. On one of the emails, the attachments are shown correctly (PDF file and a ZIP file). On the other computer, the attachments are also shown but any company logos (.png or .jpg) and other objects in the email (body_part_0.html or body_part_1.vcf) do not appear correctly in the body of the email but appear at the bottom of the email as attachments. I can send PDF files of these (2) different emails if it would be helpful.

Matt: Thanks for the quick reply... both computers have the identical antivirus software package. I'm thinking that there has to be something in the configuration of Thunderbird that is slightly different that is giving the different results.

What is the silver ring on the new iPod Touch 5g?

What is the silver ring on the bottom left side of the back of the ipod?
can't figure it out

If you press it, it pops up and you can attach the included iPod touch loop accessory; it's like a wrist band.

Need Help Getting Started with New iPod

I already had an 8g iPod, however, I just purchased a 64 on Amazon ... it was new but open box. I hooked it into my computer and the only thing that shows on the screen is the power chord pointing up to iTunes.
I have reinstalled iTunes, but my system will not recognize this iPod, nor can I get to any other screens on the iPod.
Can someone please provide some direction?
Thanks much!
Shelli

Start here:
iOS: Device not recognized in iTunes for Windows
The Users Guide is noice to have too.
iPod touch User Guide (For iOS 5.0 Software)

IPod Nano 6th Generation: What's the standby time for the new iPod Nano?

This hasn't been mentioned anywhere that I know of.

Four hours with usage, is based on how heavily you have been using it, which affects how fast the battery drains, so that looks reasonable.
The charging time varies for different devices so you should not take the suggested time as an absolute value, it is only a suggestion. You are getting good battery charge performance, looks good.

What shall i have engraved in my new IPOD CLASSIC ?

So far my thoughts are
"The names Ipod, Apple Ipod"
You got any more

I've borrowed a few from a different forum for you
"Dear [insert name], Thanks for the iPod idea. From Steve Jobs "
"WARNING: Weapon of Mass Distraction"
"GPS tracking built in, I can see you "
"The screen is on the other side you idiot"
"This ipod will self destruct if stolen"
"Scratch your balls, not my case"
"Dry Clean Only. Do Not Tumble Dry."
"iPod Therefore I Am"
"Bite my shiny, metal ***."
"Trapped in ipod factory please send help"
"No Engraving Thanks"
"iPod and iVote"
"I Kill Zunes for a Living"
"Running on leprechaun power"
"To reset iPod hit hammer ->here<-"
"iPod #0000000001"
"Demo Unit"
"Refurbished"
"Constable J Smith"
"May Contain Traces Of Nuts"
"I am Pod hear me roar"
"Synchronizing, please wait"
"I pod, you pod, we all pod, Ipod"
"In case of emergency, break glass"
"Apple Mind Control Device"
"Apple 4 World Domination"
"umop apisdn"
"Mobile Materialism"
"Waterproof to 10m"
"If you can read this, you've stolen my ipod!"
"Intel Inside"
"Heavier Pocket, Lighter Wallet"
"You can pry this iPod from my cold, dead, hands."
"Rotten Apple"
""Warning: this iPod contains heavy metal"
"Don't hate the player hate the game"
"I see you...put it down and walk away."
"Limited Edition"
"100% Legal Music Inside...Well...Almost"
I got my name and phone number engraved on mine in case i lose it ..err.. i mean in case it gets stolen.

What procedures need followed to change to new ipod?

Similar Messages

Maybe you are looking for