What profile option need to be set to deny user from login to diff Machine

Hello all,
What profile option do i need to be set to deny user access from login on to different machine. I mean a user that logon to Machine A if he/she tries to logon to machine B. Machine A must be disconnected telling him/her that he/she had already logon to a machine before.

Please see these threads.
Is It Possible To Block Multiple oracle application logging??? (11.5.10.2)
Is It Possible To Block Multiple oracle application logging??? (11.5.10.2)
restricting session in Oracle application
restricting session in Oracle application
Is it possible to limit the user to one session?
Is it possible to limit the user to one session?
Thanks,
Hussein

Similar Messages

What do I need to watch moves on my tv from my imac?

Ok I want to watch movies on my tv with my imac. I have the 27-inch, Mid 2011 here is the back of the tv:
What will I need to watch movies on my tv from my imac?

A Mid 2011 iMac has got Thunderbolt, which can be used to connect the iMac to your TV through HDMI.
Get a Mini DisplayPort to HDMI adapter, and a HDMI cable. You have to connect the Mini DisplayPort adapter to the Thunderbolt port of the iMac. Image will appear on your TV automatically, unless you have to set the TV in HDMI mode. Another option is to get a Mini DisplayPort to HDMI cable, so you don't have to buy an adapter and a cable

What connection options do I have in transfer of data from my macbook pro 13" to my iMac

What connection options do I have in transfer of data from my MacBook Pro 13" to my iMac?

If available, use a Firewire cable and put the origin in Target Disk Mode. That's how I rescued all my stuff, all 150GB of it, from my now dead Early '08 MBP to my current one.
With the new crop, I believe you can use the Thunderbolt ports as well.

How to redirect user from login page to "Set Challenge question" page

How to redirect user from login page to "Set Challenge question" page (NOT custom page) after 3 un successful password attempts?
Meaning when user types wrong password 3 times they will be redirected to set Challenge question page. If user answers the challenge question then password reset page should be appeared other wise (after remaining 3 un successeful challenge question answers) account should be locked out.
thanks for your help.

hi sandeep
Thanks for your answer. Let me ellaborate more on the requirement here.
- Password Policy and Lost Password management are set up in the identity system
- Configure login tries allowed= 5. Verify accout is lock out after 5 unsucessful login.
This is what need to achieve.
1) If a user attempts to login 3(not 5) times using an incorrect login credential he/she should be redirected to set challenge question (security question) page.
2) Then if the user attempts (remaining) 2 times incorrect challenge answer then his/her account should be locked out.
3) If he/she answers the challenge answer correctly then he/she should be redirected to password reset page.
Is this possible?

MO Operating Unit Profile Option Needed for Mass Allocation in R12

Mass Allocation does not work in R12 unless you set MO Operating Unit profile option at GL Responsibility level. Is that an official requirement from Oracle or is that a bug? A client should be able to implement and use GL without setting operating units as they are needed for subledgers.

Hi
I have found the below mentioned information on MO: operating Unit Profile option from the Oracle E-Business Suite Multiple Organizations & Oracle General Ledger Reference Guide which directly or indirectly requires the setting of the profile option at the appropriate level (responsibility, site etc)
Profile Options not Owned by General Ledger:
The following profile option affects the operation of General Ledger, but is not "owned" by General Ledger:
• MO: Operating Unit - This profile option controls which operating unit a particular responsibility is assigned to.
Note: General Ledger's Account Inquiry window ignores the setting of this profile option. This allows you to drill down to your subledgers independent from their multiple organization setup. As a result, when you drill down to subledger details, General Ledger will show you all of the transactions that comprise an account balance, regardless of which organization originated the transaction.
To use multiple organizations, you must define an accounting setup with at least one legal entity, a primary ledger that will record the accounting for the legal entity, and an operating unit that is assigned to the primary ledger and a default legal context (legal entity).
You must set either the MO: Operating Unit or MO: Security Profile profile option for each application responsibility to use Multiple Organizations context sensitive applications. When you connect to the Oracle Applications, you sign on by entering your user name and password. Then, you choose a responsibility that is available to your user. After you choose your responsibility, there is an initialization routine that reads the values for all profile options assigned to that responsibility. Oracle Applications allows you to see only the information for those operating units that are assigned to your responsibility.
Hope this helps.
Thanks and Regards
Manish Jain

Is there any profile options needed for revaluation program

revaluation program is taking long time to complete in 11.5.10.2
is there any profile options to setup revaluation. what may be the reson for this issue

GL: Income Statement Accounts revaluation rule-YTD
GL Revaluation:Validate Gain/Loss Accounts-Yes
I have made this profile setups

What do I need to save files as to transfer from AppleWorks 5 to iWork '06?

I have plenty of AppleWorks word processor documents and spreadsheets that I'm trying to transfer over to my new computer (I've been using Mac OS 9 all this time) and iWork doesn't seem to be able to read any of the documents. What do I need to save them as? And what does Mac OS X use for spreadsheets? It seems like iWork is just for Power Point and Word type documents, then again I have very little experience with all this new stuff so far. Thanks for the help.

Pages, part of iWork, is only able to open AppleWorks 6 word processing documents. It is not able to open any other AppleWorks 6 file types or any type of AppleWorks 5 or ClarisWorks documents. Keynote (the other application in iWork) is able to open AppleWorks 6 presentation documents. I don't know for sure, but, since presentation is a type of AppleWorks document new to AppleWorks 6, it would seem logical that it can't open AppleWorks 5 slide shows. None of this has anything to do with using AppleWorks 6 in OS 9 or OS X. If you don't have AppleWorks 6, you will have to buy it to use to "up convert" your AppleWorks 5 documents. For inexpensive options to buy AppleWorks 6, try eBay and do a search for "AppleWorks" or "Apple Works" (some people put a "space" in the name). Or you may purchase it from almost any retailer that sells Apple software, including the online Apple Store.
Peggy

HELP: New to Mavericks. Need advice on setting up secure user accounts

Hi,
I need advice on how to best set up user accounts on Mavericks.
I must set up an Administrative account...Any suggestion for best settings here to protect against targeted malicious exploits?
I would also like to set up two user accounts for everyday work with applications and Internet browsing done in such a way that the machine would be protected from malicious attacks but with a minimum of inconvience for the users ( myself and my wife ).
Thanks

Hi hassiman, any exploits will come in the form of users downloading suspect pieces of software like browser add-ons and extensions, device drivers and non-trusted apps.
Make sure that you do not use the admin account for any day to day use
Create two normal user accounts, one for each of you and use them day to day
When using the admin account to set up your system, pay very careful attention to the System Preferences > Privacy & Security area. There are various things to set up properly here:
There are three settings for how people can download software, 1) From Mac App Store only, 2) From App Store and registered developers and 3) from anyone. It defaults to 2) but check it and if you feel uncomfortable with that, set it to 1). This might prevent you from downloading and installing software you think you might need; but think carefully about wether you really need it and therefore wether you should temporarily allow it via a lower setting.
For the firewall, if you dont have a firewalled internet gateway device (a wireless router or similar), make sure the firewall is turned on. Most internet connection equipment does have such a firewall; make sure it is blocking any incoming connections by using its admin tool (usually a web browser interface). Consult its documentation for details.
Whenever OS X asks for a password to complete a task of any kind, look carefully at what is making it ask and if you aren't sure, don't go through with it; it is usually wanting the admin account name and ppassword to complete some kind of system modification (install, config etc.).
Make sure that you are both aware of the danger of installing any software that wants to add itself to your system or web browser. Things like custom search bars, extensions etc. If you are viewing a web page and it says you need "x" to see it or use it properly, make sure you really need to use that web site; otherwise don't do it.
It really all comes down to common sense; the worst security breaches and damage come from users who don't know what to do, but they still click "OK" when they should be clicking "cancel" or "close". Make sure you and your wife are fully aware that responsibility lies with yourselves. It is better to take a minute to decide wether to install something (even if it's 20 times a week) than spend days fixing a compromised system.

What do I need to do to allow multiple users to connect to a Server?

Hi,
What do I need to do to allow more than two people to be able to connect to a server via RDP?
I am using Server 2012 and I need 4 clients to be able to RDP in.
The clients will only be accessing the Server from our internal network while they are onsite.
Do I have to setup Licensing and what other steps do I need to do?
Thanks

Hi,
Thank you for posting in Windows Server Forum.
Yeah, agree with words of Hari. Normally by default server will allow only 2 remote connection for administrator purpose. So you want 4 users to connect you need RDS CAL to access it. As already suggested you can purchase RDS CAL (Per User or Per Device) according
to your requirement.
After installing RD License server you need to activate it first and then you can install the purchased RDS CAL.
More information:
Enabling more Remote Desktop Connections in Windows 2012
http://social.technet.microsoft.com/Forums/windowsserver/en-US/cf93b596-413b-4390-a452-acb19a4b0b14/enabling-more-remote-desktop-connections-in-windows-2012?forum=winserverTS
Hope it helps!
Thanks.
Dharmesh Solanki

What do I need to do to switch an iPhone from Verizon to T-mobile?

I am currently on Tmobile and I found two different iPhone 4 for sale that are both on Verizon. I have the serial numbers, MEID, and they are both using 7.0.3 software.
My question is what do I need to do to switch over? Do I need to unlock/jailbreak the phone? If so, how do I do that. If not, what else can I do?
Thanks in advance for your help!

The original owners of those Verizon, would need to contact Verizon to have it unlocked.
I believe if you live in the U.S. they will only unlock it for international use.
Best to find a phone on Tmobile.

What do I need to do so I can print from my iPad to my lbp6030

lWhat do I need to do so I can print from my iPad to my lbp6030 ?

Hi Garyjames!
I will be glad to assist you.
To print from your Apple iPad to the imageCLASS LBP6030w, the machine will need to be connected over the network and the Canon Mobile Printing App for iPhone and iPad will need to be installed on your device. This app can be downloaded from the Apple App Store. For more information about the app, please click the link below:
Canon Mobile Printing App for iPhone & iPad
I hope this information is helpful to you. Should you need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Set Portable Home users to admins of local machines

Does any one know how to setup users using portable home directories to be Admins of the machines they login to and use.
I can manually go set them as as an admin of the machine, but this is not practical on a long term basis.
I can't seem to see a setting in wgm computer group preferences to set this option. Is it even possible?
Thanks
Alexis

http://support.apple.com/kb/HT4332

TS3694 what network settings need to be set to update software?

I am having a horrible trying to connect and updatting my ipad. Please help!!

Hello Carl,
to have romaing working fine you need to be sure of following:
1) RF designed correctly , and enough overlapping is availble between the AP's.
in addition for environment to be free from external noise..
this can be confirmed with spectrum expert site survey
2) what authentication and encryption used ( WEP , or WPA-PSK no need to check this point ->> skip :-) )
if you are using any authentication like 802.1x ->> then enable CCKM on the WLAN to make more seamless roaming.
3) if more than one WLC availble on site , configure mobility group between them,
so if client roam from one AP in WLC 1 to AP on WLC 2 ->> no disocnnection observed....
Kind regards
Talal
===========
please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily

What do I need to have set up to play videos on You Tube, these stopped playing when I updated to the latest Firefox

Ever since I updated I cannot play videos on You Tube, I have checked that my plugins & add ons are up to date

Hi Jacquimorticha,
Have you looked at our [https://support.mozilla.org/en-US/kb/fixing-facebook-or-youtube-problems YouTube problems help section]? We've compiled a lot of information that should help you!

I'm a beginning developer and I need help in setting up my user configuration

Sorry if this is kind of vague and needs very extensive responses, but I can't find any resources online to help me with what I need. I'm doing The Odin Project's web development curriculum (rather loosely, since it advised me to follow a guide that wasn't very helpful and I switched to this one instead – also listed in TOP anyway) and I'm having trouble with setting up my Ruby environment. I could set up Brew, Git and Heroku just fine, but when I try to install Ruby 2.2.1 with RVM so all my files will be in the proper directories, I hit a problem. Here's the entire log – notice that I have 2.2.1, but not in the /.rvm directory as advised by Installfest. What's really worrying about this is that I do have clang 3.0 instead, and yet every time I need to do something with it I get the same error message. I started reading this and this hoping they'd clear things up, but they assume prior knowledge of compiling source code and setting up an entire system (and A LOT more prior knowledge than what I have at that). Every other clang/LLVM resource I've looked at is for advanced users.
The other compiling issue I'm having is with Python 3. I asked for help on Homebrew's Github repository and they told me that there's something wrong with my user configuration, but I have no idea how to fix it or even where to start. All the resources I can find are either for people who don't know what the command line is, and just teach you basic syntax, or advanced software developers – nothing in the middle. I really, REALLY need someone to help me out with this configuration issue or at least point me to a more appropriate guide that I haven't found yet.

Before you do that, just realize there is a very good chance it will mess everything up. When you are using these 3rd party languages and frameworks, and especially 3rd party tutorials, you have to play by their rules. I just wanted to know what OS you were running. Many of those various 3rd parties will assume something newer than 10.6.8, but also something older than 10.10.2. I have no idea what the exact magic sauce would be to get to exactly the right version.
You might want to consider Linux in a virtual machine. It won't be any easier to setup and may be much more difficult. But you can deal with the ruby and python inside the Linux without possibly screwing up all of your other software in the Mac world.

What profile option need to be set to deny user from login to diff Machine

Similar Messages

Maybe you are looking for