What quicktime movie settings for use in Logic

Hi, I'm working on a 50 track mix of a live gig which was also filmed and I have to work to picture. I was advised to ask the video editor to give me the following:
Quicktime Sorenson codec (or Sorenson3). Limit data rate to 500 kbps, 320 x 240.
But, working with this quality of movie makes it hard to really see if all my audio is in sync especially when the lighting is low in certain shots. It's too pixelated if I try to blow it up to see better. The editor is in France and he has to upload the files etc and I want to get better quality from him but I need to know what the highest quality movie I can run with my set up without wasting the editors time by outputting and uploading something which Logic won't work with. Anybody got any ideas. There's nothing in the manual that I can see that discusses Quicktime resolution/quality.
thanks
Mark

Using Quicktime Pro, convert your movie to PhotoJPEG format (.mov), and use that version in Logic for best sync and small filesize.
HTH
Steven

Similar Messages

What are the settings for using an ATT mail account with iPad mail?

Dear Folks,
I just switched from earthlink to att, and I can't seem to get Mail configured quite right. I can send email just fine, via stmp.att.yahoo.com. But when I try to receive email it tells me it can't connect to pop.att.yahoo.com.
Since I can send OK, I figure my email address and password have to be good, so most likely I'm using the wrong POP server address.
Would someone like to give me a clue?
Thanks!
pax / Ctein

Am having similar problems. Outgoing settings work on our iBook, using home wireless net, but the same settings do not work on our iPad. Why is this, and can anything be done to fix this?
I am connected to our AT&T DSL modem via Ethernet cable. the modem is the wireless type, also.
INCOMING: pop.att.yahoo.com
USERNAME: [name]@sbcglobal.net
PASSWORD:*************
PORT: 995 w/Use SSL checked.
OUTGOING: smtp.att.yahoo.com
USERNAME: [name]@sbcglobal.net
PASSWORD:*************
PORT: 465 w/Use SSL checked
I entered this info into the iPad before syncing it and have tried many permutations to no avail. Talking to AT&T did no good as they suggested coming out and changing settings in the DSL modem, which would have precluded using it normally, and would have made it impossible to connect elsewhere with the iPad. D'oh!
Apple doesn't have an answer as we spent a couple of hours with one of their "GENIUSES" and after asking his supervisor about it we left with only the mobileme capability. We can access the internet tho, just not use our own email address.
All I can say is HELP--HELP--HELP--HELP--HELP--HELP--HELP--HELP--HELP--HELP-!!
P.S. A family member who just left Apple told me that the next OS is going to be called "LION, OS7!"

Saving Settings for use with Export using Quicktime Conversion

Dear All,
Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
All the best, Sean

Well, you can create a droplet from Compressor that would do what you'd like...
Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
Jerry

Quicktime Export settings for projected slide presentation

I'm looking to find the best quicktime export settings to use in order to have a Keynote 3 presentation as a stand alone movie. I will be projecting the movie from a PC onto a large screen at 1024 x 768 resolution. The project is for a photography club public presentation, and needs to be top quality.
Thanks for your input
iMac 2.0GHz Mac OS X (10.4.6)

Barbara,
The 640X480 vs 720X480 dilemma is an interesting subject! DV Video and Video DVDs use 720X480 resolution. TVs do not have square pixels, but computer monitors do have square pixels - so some adjustment is needed, and 640X480 is the square pixel down-converted equivalent for computers to the 720X480 in non square pixels used by TVs......make sense?
iDVD supports high definition video
Well what this means is iDVD can read HD video files, and convert them to standard definition Video DVDs. It does NOT mean that iDVD can produce HD DVDs. HD DVDs and HD DVD players are not on the market yet.
Today's Video DVDs are not high resolution, they are 720X480. The only way to get higher resolution is to avoid the Video DVD standard, and just make a data DVD. This will not be playable on commercial DVD players, only on computers with the right software and codecs. If I needed to make professional presentations on large screen high resolution monitors, I would not use Video DVDs. Bring a new powerbook and use H.264
If you want to go the DVD route anyway, then 720 X 480 is the best you can get. I'd tell FotoMagico to export in HD (720p). This is a bit of overkill, as iDVD will encode at a lower resolution, but I've gotten good results that way.
You may have to use the anamorphicizer to get iDVD to realize the movie is Widescreen.
http://homepage.mac.com/sith33/FileSharing34.html
hope this helps
John B

TV@ Plus, what video capture settings to use?

I have a TV@ Plus and am unsure what video capture settings to use. I've had it for several months and solved my audio problems and need to know what Video Input Format, Capture Format (Profile), Capture - Size, Quality, Bit Rate and Audio Format settings to use. Should I use the same settings for all input sources or do I use different settings for CATV and S-video inputs? It seems to be OK with my current settings as far as capture and playback goes, I'm OK on the hardware part but with tech detatails I'm a bit .
I will be using it to capture from CATV, DVD and VCR input sources for later recording to DVD's. I use a GoDVD! CT-2 connected to the S-video input for recording Macrovision protected media to the HDD.
My computer sound is monitor mounted stereo speakers.
Thanks in advance for any helpful replies.

Quote from: HenryW on 12-September-06, 04:25:48
I have a TV@ Plus and am unsure what video capture settings to use. I've had it for several months and solved my audio problems and need to know what Video Input Format, Capture Format (Profile), Capture - Size, Quality, Bit Rate and Audio Format settings to use.
I already had transferred and converted some of my old VHS and VCD movie collections into DVDs (using Composite Input).
The higher the bit rate the better quality video output you will have - but bigger file size.
To give you an example:
A 2 hour video captured on MPEG set at 4000/bps will be translated it to 3.58GB. More than enough to be written on a 4.7 DVD.
For audio bit rates, you can choose from 128/bps to 224/bps. As for me I set it to 224/bps. Again the bigger bit rates the better audio output. And don't forget to slide up the audio record level to 100%. That will give you a better and clearer recorded audio output.

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the settings for web?

What are the settings for web?

800mbps Quicktime for the web,< </div>
The compression is reducing the number of pixels being shown in order to maintain the bitrate. So rapid motion, which requires nearly all of the pixels to be redrawn, causes things to stutter.
Compression is really, really hard to do. Really.
bogiesan

Whats the best settings for exporting a three camera youtube video on a mac book pro

I need help figureing out Whats the best settings for exporting a three camera youtube video on a mac book pro. I use 15 or 30 fps and aI cant figurwe it out [please help

chucknoris501
What version of Premiere Elements are you using on Mac?
Export your Timeline content to a .mp4 file, using export settings which have been customized under the Advanced Button/Video Tab of the export's preset.
See Publish+Share/Computer/AVCHD and .mp4 category. The exported file is then uploaded to YouTube at the YouTube web site.
If you post the properties of your source video and project settings, I will suggest the settings for the Timeline content export to file saved to the computer
hard drive for upload to YouTube at the YouTube web site.
ATR

Settings for using BlackBerry world

What are settings for using BlackBerry world???
When I want open it I have this massage:"there was a connection problem.BlackBerry World mus close"
Help me,plz.

Hi Farid-11388
You can update to 10.2 through the BlackBerry Link
But it is recommended to check if your Operator officially released the 10.2
And so it must be an update.
Always remember before upgrading to backup with BlackBerry Link.
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?

When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?

If your wireless environment is less than ideal, as it is in most inhabited areas, the influence of other wireless networks and devices competing for the same very small portion of the electromagnetic spectrum will affect your network's performance. Your own wireless network is a microcosm of that environment.
To mitigate the effects of competing wireless networks, use 5 GHz to the maximum practicable extent. It is comparatively free from interference contributed by other wireless devices and is likely to remain that way for some time. However, it is less tolerant of intervening obstructions and construction materials than the 2.4 GHz spectrum, so it's not a panacea. Every installation is different so you must experiment to determine the optimum configuration.
Place your wireless router (what kind is it?) in a central location, convenient to all the devices that require it. Most of the time a utility or ISP will locate it in some remote corner next to the utility service entrance. That is almost always the worst possible location.
Others find that only a direct wired Ethernet connection between router and devices will maintain uninterrupted access to Airplay.
That is almost certain to result in the best possible AirPlay performance. Short of having everything hard wired (it's not an option for the iPad for example) use an Ethernet connection for all the devices that lend themselves to that method. Your AppleTV is certainly one of them, since its location is not likely to change very often. Your AirPort Express should be another, since your audio systems are likely to stay put as well. Connect them both to your existing router, either directly or through an inexpensive Ethernet switch. Your problems are likely to be solved with just those two connections.

Best drum loops for use with Logic? Ease of use, usability, etc.

Hi,
I have BFD2 but find it slow to load and sometimes clumsy auditioning loops within Logic. I love the Apple Loops library but I wondered if people are importing MIDI drum files for use with Logic. Do all drum files use the same MIDI mapping? If I drop a BFD2 loop into a Logic drum virtual instrument will it work? I bought a few packs from Groove Monkee but have yet to use them with Logic. I only use them within BFD2.
I'm basically looking for a seamless way to stay within Logic to improve my workflow. It's taken me days sometimes to get a drum track right by going back and forth with BFD2. Is there a concept I'm missing that would make it easier?
Thanks

try Stylus RMX by Spectrasonics. http://www.youtube.com/watch?v=FlgP1q1HCj4

What are the settings for rework order quality inspection

HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?

Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction

WHAT ARE THE SETTINGS FOR AN ICLOUD EMAIL ACCOUNT

I am trying to create an iCloud email account on my iPad with IOS 6.0.1
what are the settings for Host name in incoming and outgoing mail servers?

the information on that link doesnt work. my icloud address is [email protected] not [email protected].. although i tried both on my galaxy note 2. either way the server information is not verifying.

What are the settings for automatic service PO?

What are the settings for automatic service PO?

Hello,
I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
I hope you can help me, thank you!

What are the settings for Transport?

What are the settings for Transport?

u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps

What quicktime movie settings for use in Logic

Similar Messages

Maybe you are looking for