What r all the boot loaders for ppc macs

i need a boot loader for ppc macs something like this
But thats my intel macbook
if anyone has any idea plz reply
thanks mike

Hi, Klaus.
Klaus's method:
Selecting the boot partition can be postponed until the code common to all OSes is executed: firmware in chips, if, 'Alt' pressed, pause and display screen in NVRAM; then execute the first byte on the first boot partition pointed to by the partition table on the drive selected in NVRAM (changed by 'system preferences').
Boot Loader:
Firmware executed, then first byte on default boot drive. This has 'boot loader' with text menu offering OSes. Pause. Marks boot partition on selected drive, and sometimes copies first record of this boot partition over itself (the boot loader) and changes the CPU pointer back to first byte of new boot drive (chain loading). Very clean.
Other methods 'shoot' to permanent boot loader (with spiffy graphic menu shown) and back. All that matters is that first byte on drive where OS should continue is eventually the first byte of the OS you want.
Snow Leopard (HFS+) and GNU/Linux (ext3) make a qood pair. Both can read and write HFS+ natively. Still, if you kept eMac with Ubuntu and Firewire cable, drive damage on either could be fixed.
Bruce

Similar Messages

What are all the tables used for this report:

hi
what are all the tables used for this report:
report:
Stock Report, which will give opening balance, receipt, issue, and closing balance for any given Duration for any material.
thanks in advance

Tables: MSEG, MKPF, MARD.
FOR REFERENCE SEE TRANSACTION : MB5B.
Message was edited by: Sharath kumar R

What r all the tables used for this report. please reply

hai,
what r all the tables used for this report.
report :

Report to display all finished goods that go out-of-stock. Developed a drill down report for materials details (totals and subtotals for material stock values by material group and material type).
thanks in advance

hi Ashok,
Check this out
http://www.allsaplinks.com/tables.html
http://www.sapgenie.com/abap/tables.htm
Regards,
Santosh

What r all the tables used for the following report

hai
what r all the tables used for the following report
report:

Report that displays all the late shipments in a particular period of time
send important fields for this tables also
thanks in advance.

Hi,
Imp table are vttk,vttp,vtts.
Regards
Amole

What are all the tables used for this report ? please reply

hai
i have practcing reports,
so any one give me the name of the tables used for the below report
Created report for invoice details, shipping details and partner function.
thanks in advance.
by
ashok

Hi Ashok,
I am sending you the code which will display tables present in SAP with the description and jump to datadic or SE16 by selecting plus F2 or F8.
REPORT ZZBGS044 MESSAGE-ID Z1 LINE-COUNT 65 LINE-SIZE 132
 NO STANDARD PAGE HEADING.
Description: This program list all tables in regards to the *
 selection criteria. *
Customizing: You need not to make any customizing to use this program*
Change of You only have to check that tables, functions and *
release: includes till exists. Bedst just to check and run the *
 program. *
Programmer: Benny G. Sørensen *
Date: July 1995 *
SAP R/3 2.2F *
Corrections----
Date Userid Correction *
xx-xx-xxxx xxxxxxxxx xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx *
TABLES: DD02V "SAP tables view
DATA: BEGIN OF DYNTAB OCCURS 2000.
 INCLUDE STRUCTURE BDCDATA.
DATA: END OF DYNTAB.
DATA: BEGIN OF TABLES OCCURS 100.
 INCLUDE STRUCTURE DD02V.
DATA: END OF TABLES.
DATA: L TYPE I,
 REPL(30) TYPE C VALUE '????????????????????????????'.
FIELD-SYMBOLS:
PARAMETERS:
TABLE(30) TYPE C,
TITLE(74) TYPE C LOWER CASE DEFAULT ' ',
DOWNLOAD(1) TYPE C DEFAULT ' ',
FILENAME(65) TYPE C DEFAULT 'c:SAPDOC?',
EXCEPT(30) TYPE C DEFAULT ' '.
START-OF-SELECTION.
IF TABLE = ''.
TABLE = '*' .
ENDIF.
IF TITLE = ''.
TITLE = '*' .
ENDIF.
TRANSLATE TABLE USING '*%'.
TRANSLATE TITLE USING '*%'.
CONDENSE EXCEPT NO-GAPS.
L = STRLEN( EXCEPT ).
IF L > 0.
ASSIGN REPL(L) TO
ENDIF.
SELECT * FROM DD02V INTO TABLES
WHERE DDLANGUAGE = SY-LANGU
AND TABNAME LIKE TABLE
AND DDTEXT LIKE TITLE.
HIDE DD02V-TABNAME.
IF EXCEPT NE ''.
REPLACE EXCEPT LENGTH L WITH
INTO TABLES-TABNAME.
ENDIF.
TRANSLATE TABLE USING '% '.
CONDENSE TABLE NO-GAPS.
IF TABLES-TABNAME CS TABLE.
WRITE:/ TABLES-TABNAME, ' ', TABLES-DDTEXT.
APPEND TABLES.
ENDIF.
ENDSELECT.
IF DOWNLOAD NE ''.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'WK1' "ASC, WK1, DBF, DAT, bin
TABLES
DATA_TAB = TABLES.
ENDIF.
AT LINE-SELECTION.
SET PARAMETER ID 'DOB' FIELD SY-LISEL(30) .
CALL TRANSACTION 'SE12' AND SKIP FIRST SCREEN.
AT PF8.
CHECK SY-LISEL <>
SET PARAMETER ID 'DTB' FIELD SY-LISEL(10) .
REFRESH DYNTAB.
PERFORM DYNPRO USING:
 'X' 'SAPMSTAZ' '0100' "Selection screen
 ,' ' 'DD02V-TABNAME' SY-LISEL(10).
CALL TRANSACTION 'SE16' USING DYNTAB MODE 'A' .
FORM DYNPRO USING DYNBEGIN NAME VALUE.
IF DYNBEGIN = 'X'.
 CLEAR DYNTAB.
 MOVE : NAME TO DYNTAB-PROGRAM,
 VALUE TO DYNTAB-DYNPRO,
 DYNBEGIN TO DYNTAB-DYNBEGIN.
 APPEND DYNTAB.
ELSE.
 CLEAR DYNTAB.
 MOVE: NAME TO DYNTAB-FNAM,
 VALUE TO DYNTAB-FVAL.
 APPEND DYNTAB.
ENDIF.
ENDFORM.
Regards,
Azaz Ali.

What are all the Function Keys for on my new KU-0841?

I just got an HP KU-0841 Keyboard and want to know what the Function Keys are for F1-F12.
Where can I learn about how to use them? Thanks

Hi,
Depending on application, or game. For example on one application which I use daily
F1 = Help (nearly all applications use this),
F2 = Slpit screen
F3 = End
F4 = Expand
F5 = Find / Re Find
F6 = Change
F7 = Up
F8 = Down
F9 = Swap
F10 = Left (one screen)
F11 = Right (one screen)
F12 = Cancel
Again, DEPENDING ON applicantion, you have to learn from application. Some applications allow you to re-program those keys.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

What are all the tables used? experts help me

hi
what r all the tables used for this report.
Delivery Performance Report - to compare the customer delivery schedules with the deliveries created in SAP to determine whether they are early, on-time, or late. This measurement is done by comparing the customer request date against the goods issue date from the delivery
please any one help me
thanks in advance

hi.
If you know standard transaction or program for purchase order or for any function . you can know the affected tables by that transaction or program USING TRANSACTION
'SE49'.
I am working on 4.6c it does exist in this version.
if does not exist on ur version
then other way to find affected tables by a transaction or program is--
first find the development class for that transaction (like Va01) then goto se80 and enter that development class .it will show all the tables affected .
steps to find Development class for example (Va01).
press F1 to any field then click on tech. info
(ii) double click on program name(SAPMV45B).
(iii) click on object directory entry in GOTO menu.
(iv) from here u will get Development class (VA).
now in se80 u will get all the databasec tables under the node object entry.
hope this will help.
Regards .
vikas

What are all the tables used?

hai,
what r all the tables used for this report .
Created an interactive report in which sales orders were listed against different customers within the range selected. Selection of multiple sales orders were allowed for which checkboxes are provided.
Any help will be much appreciated.
thanks

hi
Sales order related tables are:
hi ashok,
u can use from the following tables:
VBAK -Header data(sales document).
VBAP -Item data(sales document).
VBUK -Header Status.
VBAK -Item status.
VBEE -Sales requirements (individual records)
VBFA - Sales document flow
Customer data related tables-
KNA1- Customer master
KNVV-Customer master sales data.
KNVP-Customer master partner functions.
Reward points if helpful.
Naveen

How to find out what are all the change pointers assoicated for an idoc ??

Hi ,
How to find out what are all the change pointers activated for an idoc ??
Thanks,
Varma

Verma,
You can check what are the active Change Pointers for the message type in tcode BD50
Use tcode BD61 to check whether change pointers are active or not??
Hope this helps..

What all the prerequisites required for Combined Delivery &Invoice Process

Dear Guru's
Can you please educate me what all the prerequisites required for Combined Delivery Process(VL10A / VL10C) and Combined Invoice Process?
Regards,
Varma

Hi ,
For combined delivery you have to make some settings
In the customer master XD01/VD01 in the shipping tab you have to check the ORDER COMBINATION in the SHIPPING TAB
In the COPY CONTROLS from Order to Delivery in VTAL at the Header you have to maintain the COMBINATION REQUIREMENT as 051
And also the data like
INCO TERMS,
SHIP TO PARTY
DELIVERY DATE
ROUTE
SHIPPING POINT
should be same for all the Orders
To combine the Deliveries into Invoice
you have to maintain the copy controls from DELIVERY TO BILLING in VTFL at the item level as 003
And also certain data like
PAYMENT TERMS
PAYER
BILLING DATE
ACTUAL GI DATE
INCO TERMS
should be same for all the deliveries
Please revert if you need any more
regards,
santosh

How to find what are all the rules and events are monitoring for specific server in SCOM 2007

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.

how to find what are all the rules and events are monitoring for specific server in SCOM 2007.
I need to know what are all the events, services, and rules are monitored for the specific server.
Kindly help me friends.
Thanks for the question Sandoss. This is something that we all come across at sometime.
Thanks & regards, Sumit Agrawal
The lack of this feature is an inexcusable oversight for an enterprise management product. They have some serious lightweights making design decisions on the SCOM team. 5 thumbs down.
BTW the answer is probably LOTS of stuff. Literally 100's of workflows are running on any server.
The following OpsMgr DB query will list all running monitors on a server. Change the name of @srv. I think this works pretty well. I'd like some feedback if something is missing.
DECLARE @srv varchar(30)
SET @srv = 'your name here'
SELECT mon.displayName as monitor, bme.FullName,bme.DisplayName as object,
case
 when s.HealthState = 1 then 'healthy'
 when s.HealthState = 2 then 'Warning'
 when s.HealthState = 3 then 'Critical'
 else 'N/A'
end as Health
FROM state AS s WITH (NOLOCK)
left join BaseManagedEntity as bme WITH (NOLOCK) on s.basemanagedentityid = bme.basemanagedentityid
left join dbo.MonitorView Mon WITH (NOLOCK) on Mon.ID = s.monitorid
where
bme.FullName like '%' + @srv + '%'
and s.HealthState <> 0
and mon.IsInternalRollupMonitor = 0
and mon.IsExternalRollupMonitor = 0
order by bme.DisplayName, mon.displayName

What are all the major SPRO parameters available for MRP run in SAP.

Dear Frndz,
What are all the major SPRO parameters available for MRP run in SAP.
Regards,
Srini

Hi,
For MRP, the main Customization settings involved are:
1. Activate MRP and Set Up Planning File - OMDU
2. Define Parallel Processing in MRP - OMIQ
3. Define Scope of Planning for Total Planning - OMIZ
If you want to use MRP Areas and include this in Scope of Planning then.
1. Activate MRP for MRP Areas
2. Define MRP Areas - OMIZ
With MDBT of Program : RMMRP000 you can schedule the Background MRP Run. (with a variant)
If you need any any specific information please inform..
Regards,
Siva

What are all the subjobs that get called for when a load is scheduled.

Can any one please tell me - "when I schedule a load to my Infocube or ODS or other data target, what are all the sub jobs/requests that get called for? Like if I go and see in Tcode SM37, I see several jobs running. Any input is greatly rewarded. Thankyou!!!!

Hi,
Adding to what is mentioned above, if its scheduled if its a BW datamart load scheduled in background you can see that in SM37 job log (give BIrequest name) (In source system if load is from R/3) and it should give you the details about the request.
SM66 > Get the job details (server name PID etc from SM37) and see in SM66 if the job is running or not. (In source system if load is from R/3 or in BW if its a datamart load). See if its accessing/updating some tables or is not doing anything at all.
Also try SM50/SM51 to find that job.
Try RSMO from the Infopackage monitor.
Thanks,
JItuK

What are all the Standard Data targets&Data source for Warehouse management

Hi,
What are all the Standard Data targets & Data source for Warehouse management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

What are all the Standard Data targets&Data source for Transportation Manag

Hi,
What are all the Standard Data targets & Data source for Transportation Management.
Thanks,
Ahmed.

HI,
the master data
1.equipment data --IE01
2.All functional locatiions -IL01
3.Maintainnace work centers - IR01
4.Task list data - IA05
4.Schedule maintanence plan
6.Strategies
7.Measuring points
8.Characters for calibration
9.Equipemnt BOM
10.Material BOM
Regards,
Anddra

What r all the boot loaders for ppc macs

Similar Messages

Maybe you are looking for