What r the limitations of  BADI?

I mean what cannot b done or not allowed while working with BADI' S?

Hello Siva
BAdIs are the most flexible approach to user-exits.
Hans' remark is not correct if you know the trick how to access data from the BAdI calling program:
[SAP User Exits and the People Who Love Them|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/208811b0-00b2-2910-c5ac-dd2c7c50c8e8]
And do not forget that the BAdI interface is implemented by a class! You may not know when the calling program instantiates your BAdI yet when it happens you can implement any kind of logic you would like to have in the CONSTRUCTOR method of the BAdI implementing class.
Regards
  Uwe

Similar Messages

  • What are the limitation of the 4 Port Gigabit ethernet Security Service Module (4GE SSM)?

    I was wondering if anyone can help me out. I am trying to create a redundancy topology which require several connections to an ASA 5510. I am looking at extending the connections to my ASA 5510 appliance with the four port gig ethernet security module (4GE SSM). I am trying to find out what the limitations are on this particular module.
    I have heard that there might be limitations to the 4GE SSM. Such as the interfaces on this module might process data separately from the ASA 5510 appliance. My question is does the ASA four port gig ethernet security module (4GE SSM) interfaces act as a extension of the ASA 5510 appliance or does it process and filter data separate from the ASA 5510 appliance ?
    My concerns are that the 4GE SSM does not utilize all the security features of the ASA 5510 appliance, and that it just separates traffic into security zones. I interpret that to mean that each interface can be placed in a separate security level in which case has a separate security algorithm and uses the security level to force security policies. Nothing more.
    My second question if relevant would be what are the limitations?
    Thank you for your help on this topic.
    mike

    The 4GE SSM just gives you the four additional ports. It doesn't increase the processing capacity of the 5510 (a relatively low end box whose replacement - the 5515X -  has been out since this past spring). It works off the same configuration script and CPU as all the built-in ports.
    The only limitation I can think of off the top of my head is that members of an Etherchannel cannot span the SSM and the built-in ports.

  • What is the significance of badi BBP_Create_PO_Back?

    Hi Friends
    what is the significance of badi BBP_Create_PO_Back.?
    Thanks & Regards
    Kanni.
    Edited by: Kanni. on Jun 21, 2009 10:41 AM

    Hello,
    BBP_CREATE_PO_BACK was used to pass additional data from SC to ECC PO.
    This BADI is replaced by BBP_CREATE_BE_PO_NEW with SRM 5.0. Using this BADI you can change all the data that is transferred to the backend system for generation of a purchase order. This includes, for example, the item data, the account assignment data, and texts. All the shopping cart data is available as input parameters.
    Hope this helps.
    Thanks
    Ashutosh

  • What are the limitations in terms of data size  or performance while using csv or text file as datasource?

    <p>Also what are the limitations in terms of data size  or performance related issues while using csv or text file?</p><p>Is it the best practice to use csv , text file to use as a datasource to improve performance?</p><p>Please Advice.... </p><p>&#160;</p>

    <p>Hi,</p><p>Create Same Data Input for CSV and Text File ,Create 2 different reports one for CSV and One for Text ,run them one you have done that.</p><p>Go to Report Menu and Select Performance Information .Use the Data in that to check which one is good datasource to improve performance</p><p>Cheers</p><p>Rahul</p>

  • What r the limitations of solution manager

    hi
    What r the limitations of solution manager
    thanks in advance

    solution manager
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce89c290-0201-0010-5985-dd64605111fd
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ce0b74e3-0601-0010-29a0-f2a6af98ef06
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5348ada6-0301-0010-f38f-a5076178843e
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5d29d690-0201-0010-2f9f-a0f957dee385
    What is Solution Manager?
    Solution manager
    /thread/384815 [original link is broken]
    Is SAP Project System part of Solution Manager?
    Rewards if useful..........
    Minal

  • What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications?

    What are the limitations of using labview 8.5.1 developers suite verses a real-time module in field point applications? Can an exe. be loaded onto a field point controller or does the controlling program have to reside on a PC for example?

    centerbolt is correct, you can't load a .exe or even run a program on the fieldPoint controller unless you have the Real Time module.  However, that does not mean you can't use your FieldPoint bank without the Real Time module. 
    From LabVIEW for windows you can make calls to the fieldpoint IO using the fieldpoint read/write functions. 
    This program runs on the PC not the FieldPoint controller.  If you loose network connection to the fieldpoint, your program will loose connection to the IO.  For many data logging applications this type of arrangement can work just fine.  However, if this is the only type of application you are ever going to run, then you may as well not buy the Real Time controller for your fieldpoint but the network controller only. 
    If your application requires more reliability, and/or greater determinism than can be achieved by running a program on windows, then you should use the LabVIEW Real Time module and develop a program that can run down on the FieldPoint controller independent of windows.
    Message Edited by StevenA on 07-22-2008 04:14 PM
    SteveA
    CLD
    FPGA/RT/PDA/TP/DSC
    Attachments:
    fp pallet.PNG ‏6 KB

  • What are the limitations of the free 30-day InDesign trial?

    What are the limitations of the free 30-day InDesign trial?

    There are no limitations for 30 days, it will work exactly as if you have a subscription. But if you don't get a subscription, after 30 days, you will no longer be able to launch the program.

  • What are the limitations of the software during the 30 day trial?

    what are the limitations of the software during the 30 day trial?

    Trials are fully functional.
    The only limitation is that they will stop working 30 days after first launch.
    You remove the time limit by entering a valid serial number which you get when you purchase the software. Or by subscribing to a Cloud membership plan.

  • What is the limitations of an Openhub

    Hi
    When we use openhub what is the limitations.
    Is there any limitations of an Openhib
    shankar

    Hi BI,
    The Open Hub service enables you to distribute data from an SAP BW system into external data marts, analytical applications, and other applications. With this, you can ensure controlled distribution using several systems. The central object for the export of data is the InfoSpoke. Using this, you can define the object from which the data comes and into which target it is transferred.
    No real technical limitation if you are looking for bulk transfers
    You may have to manipulate a datamodel to suit the scenario as the OLAP processor is not used
    SO if you have complex requirements you may have to create a query to APD into a DSO then open hib from there
    And naturally if APD starts to have memory problems then you use the infoprovider read function module to do have an ABAP to read data then into a DSO and open hub out
    I dont really use open hub off standard cubes as there is always a OLAP requirement in the extraction fo data
    Naturally if you require just to dump raw data out then you could open hub of the cubes - but in that instance your global IT architects may ask why you are dumping data to a third party tool where they could come in on OLAP BAPIs etc at run time to access BW ie extra front ends
    The functionality will work with extraction to a database table.
    In BW 3.5:
    The assignment of Open Hub Destination and InfoSpoke is an one to one relationship. One InfoSpoke
    should not be used in more then one process chain. For the extraction, the database table must
    contain the technical key. This option must be set.
    An InfoSpoke should be a used at most in one process chain.
    In NW2004s:
    It is possible to assign one Open Hub Destionation to more then one DTP.
    One DTP can be a process step of more then one process chain.
    In the runtime only one request can be loaded into the Open Hub Destination. The next load can
    started, if the status of this request is set to u2018Greenu2019.by the 3rd party application.

  • What are the limitations of remote API?

    Excuse me,
    I am new to Oracle BPEL, and going to customize the worklist application using remote API.
    I read the Sample Worklist Application for learning the remote API.
    When I learning about task attachment's API,
    I saw a thread
    RemoteWorklistServiceClient -- attachment
    Suddenly, I found that there is different between local and remote API.
    Would anyone like to tell me what are the limitations of remote API?
    By the way, could there is any API for retrieve process list?
    The reason is I am trying combine some feature of the console into my worklist application
    such as list process with details, deploy/undeploy process, active/retired process lifecycle and turn on/off process state.
    I only found how to start process:
    Locator lLocator = new Locator({Domain}, {Domain.Password}, {Properties});
    IDeliveryService lDeliveryService = (IDeliveryService) lLocator.lookupService(IDeliveryService.SERVICE_NAME);
    lDeliveryService.request({ProcessName}, {OperationName}, {NormalizedMessage});
    Thank you very much ^^
    Roy

    Excuse me,
    I got the answer by testing the remote API
    And I have another question about the BPEL API which used in the console
    I have success construct the class com.oracle.bpel.client.Locator
    It providing a set of methods for invoking Oracle BPEL
    However, the methods always using WhereCondition as parameter
    therefore, I need to know about the database.
    1. Could anyone tell me where can I found the database schema?
    2. There are some deprecated APIs what is the preferred APIs of them?
    - IDeliveryService.SERVICE_NAME
    - IDeliveryService.request({Process}, {Operation}, {NormalizedMessage})
    - IDeliveryService.post({Process}, {Operation}, {NormalizedMessage})
    Thank you very much ^^
    Roy

  • What are the limitations of ODI?

    ODI is an E-L-T tool of its first kind and has good performance when copared to ETL because of its architecture.
    BUt what are the limitations of ODI?
    And What are the strong points to recommand ODI to the clients?

    what are the limitations of ODI ::
    (i) it won't support multi target We cant say it wont support. We can achieve this using IKM mTI or using some logic in a single interface. But directly you can't drag multiple table into interface (target canvas)
    (ii) Interfaces are depending on KM so to implement any new logic we need to know about Jython Not exactly. But yes if you know jython it is more helpful for this. Discussed
    http://www.linkedin.com/groups/How-was-ODTUG-Ask-Experts-140609.S.197740849?view=&gid=140609&type=member&item=197740849

  • What are the limitations of AJAX in BEA Weblogic 10.2 ?

    Hi All,
    I am wondering if some one could tell/summaries what are the limitations of AJAX in BEA weblogic portal 10.2 ??

    Please reask this question in the WebLogic Portal forum:
    WebLogic Portal
    I think you'll need to be more specific as well. Are you referring to portlet development, in which the portlet uses a javascript library, drag/drop functionality in Dynamic Visitor Tools, etc?
    http://edocs.bea.com/wlp/docs102/clientdev/ria.html#wp1008891

  • What are the Limitations of  EBP-SUS?

    HI SRM Gurus,
    What are the limitations of EBP-SUS?
    1. Classic Scenario.
    2. Extended Classic Scenario.
    Is ASN possible with EBP-SUS extended classic scenario.
    Version 5.0
    Server 5.5
    Thanks
    Rams

    Hi please refer to the OSS note with number 543544 for details
    award points if usefull

  • What are the limitations of layout builder

    Hello BPS Experts,
    what are the limitations of the layout builder.
    Suggestions appreciated.
    Thanks,
    BWer

    Hi,
    One of the major one, I would say is needs SAP GUI without which it cannot be used.
    The same is no longer applicable to Integrated planning as it has a web based interface.

  • What r the limitations of ST01

    hi guys
    what r the limitations of ST01?
    thank u

    Hi Sunny,
    ST01 is used as Authorization Trace. Authorization Object S_ADMI_FCD gives access to the trace function
    You can analyze authorizations as follows: Choose Tools -> Administration ->  Monitor -> Traces ->  SAP System Trace or Transaction ST01.
    Choose trace component Authorization check and pushbutton Trace on. The trace is automatically written to the hard disk.
    To limit the trace function to your own sessions, choose Edit -> Filter -> Shared. Enter your user ID in field Trace for user only in the displayed dialog box.
    Once the analysis is completed, choose Trace off.
    To display the results of the analysis, choose Goto -> Files/Analysis or the pushbutton File listSelect the required file and choose Analyze.
    The results of the authorization check are displayed in the following format: <Authorization object>:<Field>=<Tested value>
    The return code shows whether or not the authorization code was successful.
    ST01 Return Code 0 -
    Authorization check passed
    1 -
      No Authorization
    2 -
    Too many parameters for authorization check
    3 -
    Object not contained in  user buffer
    4 -
    No profile contained in user buffer
    6 -
      Authorization check incorrect
    7,8,9 -
    Invalid user buffer
    Hope it helps.
    Please awatd points if it is useful.
    Thanks & Regards,
    Santosh

Maybe you are looking for