What r the reports available under 0sd_c02 and0sd_c01
what r the reports available under 0sd_c02 and0sd_c01
Hi Satish,
Please refer to the "queries" subsection in the left panel of this following link. It contains list of queries from 0SD_c01 to 0SD_c05 cubes. You can see the corresponding cube when you select the query.
http://help.sap.com/saphelp_nw70/helpdata/en/da/1669372b2b7d20e10000009b38f842/frameset.htm
Assign points if helpful.
Regards, Uday
Similar Messages
-
What are the methods available to modify standard reports?
What are the methods available to modify standard reports?
<b>Hi,
I think you can copy those reports into Zreports</b> -
The report options under "configure" and CSV or xls.
The report options under “configure” does not give .csv or xls as options. Instead of using vi to pass data to database, is there a simple way to transfer all the results (just like the way in the report that automatically generated) to .csv or xls...
Thanks.Hi,
in order to modify the report generation, you have to understand the way how TestStand works in regard of the report generation.
There is a tutorial which explains this which you can find here. But please note that the tutorial is currently undergoing an improvement process.
The reason that the report options don't give you the option for xls or csv as report is:
Neither xls nor csv are predefined. So for example measurement values in xls can be placed in a special worksheet or included in a main sheet in a certain column.
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
What are the Reports are Avialable for Kuwait Localisation ..
Hello sir,
We are Implementing HRMS with the Version of 12i for the Kuwait localisation, I am wondering that what are the Reports are available in the Kuwait Localisation. pls help me on this ...
with regards
User600722Refer to Note: 231369.1 - Oracle HRMS Reports (HTML listing)
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=231369.1 -
What is the lighting bolt under pic of battery with red line
what is the lighting bolt under the battery icon with the redline
Mine is doing the exact same thing...We are not the only users who have run into this SAME problem. I have searched everywhere for a solution. I've tried JL, BBsak, DM, and crackmem. Nothing works...can't seem to connect
Berries are good for you! -
How can we know what r the reports done on a particular cube or ods
Hi Fnds ,
I just want to know what r the reports done on my CUBE or ODS.
is there ant specfic table or t-code for that.Hi Ravi,
Double-click on your DSO/ Cube, go to the 'where-used list' option on the top right-hand side. When you drop-down, you can see all the objects where the DSO/Cube is used. If it is being used in a query, the same would be displayed
Rgds,
Sonal -
What are the attributes available on Task Status Notification?
Hi,
I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
<Tasks.Task Name> is <Task Details.Status>.
<Task Details.Status>
<Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
Thanks,
Renato.
Hi,
I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
Thanks,
Hi,
One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
I think I'll have to call Oracle's Support.
=======================================================
Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
Body:
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Tasks.Task Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
=======================================================
As I've said, the e-mail was sent but in blank:
The Process task is .
The details of this process task are as follows:
Process Task Name:
Process Task Status:
Resource Name:
Target User: []
Assigned to: []
Response Code :
Response Description :
Error Details :
Is it possible to have those fields available on notifications?
Thanks,
Edited by: Renato.Guimaraes on 23/10/2009 08:05
Edited by: Renato.Guimaraes on 24/10/2009 15:57
Edited by: Renato.Guimaraes on 26/10/2009 13:31
I didn't get any answer until now.. Below it is what I've done.
a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
SELECT
sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
FROM
osi, sch, mil, rsc
WHERE
mil.mil_key = osi.mil_key and
osi.sch_key = sch.sch_key and
sch.sch_key = ? and
rsc.rsc_key = osi.rsc_key
c) Load the e-mail definition template and replaces the fields
d) Sends the e-mail
With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
Edited by: Renato.Guimaraes on 12/11/2009 12:19
Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread SubjectHi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman -
What are the commands available to read a file from application server and
What are the commands available to read a file from application server and store the file into an internal table?
Hi,
To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b> -
What's the report to see the result after we run KSUB ?
Dear All,
Could you kindly help me ?
I'm new for FI-CO .
If i'd like to run assessment, and in the cycle I use Receiver Rule: Variable portion and type is Plan SKF . The sender will be cost center and receiver is WBS Group.
Afterward, I run KSUB to run cycle.
And I'm keen to see the result after doing the assessment, what's the report for it ?
Could somebody tell me ??
I wanna see the result from allocation ( type assessment). What's the report for it ?
Thanks a lot.
Have a good day,
Best regards,
Daniel N.Hi,
the sender / receiver relation and the values are reported after executing KSUB.
Another possibility is to execute KSB1 report for the sender cost centers and the assessmnet cost elements for the assessment period. Create a layout where the receiver (=partner object) is displayed.
Best regards, Christian -
What does the blue dot under some apps mean
what does the blue dot under some apps on the ipad air 2 mean. There are not dots under all the apps.
They are indeed recently updated apps that have not been used since they were updated. As soon as you launch the app after updating, the blue dot will disappear.
-
What are the reporting changes in BI 7.0 and sap 3.5
Hi,
what are the reporting changes in BI 7.0 and sap 3.5.
can anybody know the other name of BI 7.0.
what are the min,max no of load times.
what is the load timings if the onsite office is at USA.
Thanks & Regards,
cheta.Hi Cheta,
New Features in BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd6419
/people/michael.eacrett/blog/2006/06/07/whats-new-in-sap-netweaver-702004s--an-introduction-to-the-functionality-deltas-and-major-changes
BI 7.0 reporting features
http://searchsap.techtarget.com/cgi-bin/rd.pl/ftID-1121728-ctID-1064004?//expert/KnowledgebaseAnswer/0,289625,sid21_gci1064004,00.html
http://help.sap.com/saphelp_nw04s/helpdata/en/9d/24ff4009b8f223e10000000a155106/content.htm
Some features of BI 7 are
1. In Infosets now you can include Infocubes as well.
2. The Remodeling transaction helps you add new key figure and characteristics and handles historical data as well without much hassle. This is only for info cube.
3. The BI accelerator (for now only for infocubes) helps in reducing query run time by almost a factor of 10 - 100. This BI accl is a separate box and would cost more. Vendors for these would be HP or IBM.
4. The monitoring has been imprvoed with a new portal based cockpit. Which means you would need to have an EP guy in ur project for implementing the portal !
5. Search functionality hass improved!! You can search any object. Not like 3.5
6. Transformations are in and routines are passe! Yess, you can always revert to the old transactions too.
check these link's
http://help.sap.com/saphelp_nw04s/helpdata/en/a4/1be541f321c717e10000000a155106/content.htm
In this one - check out slides 28-34
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
Check this link to get PDF doc on SAP BI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
Here is a powerpoint overview with illustrations of the differences between NW2004s (BI 7.0) and BW 3.5.x
http://csc-studentweb.lrc.edu/swp/Berg/Articles/NW2004s_what_is_new.ppt
check the presentaion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5c46376d-0601-0010-83bf-c4f5f140e3d6
http://csc-studentweb.lrc.edu/swp/Berg/BB_index_main.htm
http://csc-studentweb.lrc.edu/swp/Berg/articles/NW2004s_what_is_new.ppt
Web Blogs & Threads in SDN
/message/502929#502929 [original link is broken]
/people/sap.user72/blog/2006/01/27/sap-netweaver-bi-versus-sap-bw-the-sequel
Refer these links
There is lot of Info Reg BI7.0 including Reporting also.
Regards
Karthik -
What are the report-relevant settings in the hierarchy maintenance?
What are the report-relevant settings in the hierarchy maintenance?
Hi,
See these links.
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/0e/fd4e3c97f6bb3ee10000000a114084/frameset.htm
assign points if this helps.
Thanks.....................
vasu................... -
What are the frameworks available out there
I just want to know what are the frameworks available out there for Desktop application ?
I want to create a standalone application in Java and I heard that I can make it easier if I follow a framework.
After having a look at frameworks for Java, it just completely confuse me, as it is very different from frameworks for Flash (which I do most).
The java framework covers much more stuff than what Flash framework covers (which mainly regulate the way how the SWF communicate with the server and the design of the classes )
I still wonder what is the definition of framework in Java ? Do I really need one for a standalone application, or I just need to follow the MVC design for my classes ?
I just need to get it right before I actually work on my program.
Thanks. -
I'm trying to update my parent's iMac G5 with OS X Snow Leopard and unable to do so because it doesn't have an Intel processor. Are all new upgrades going to be unavailable? What is the last available upgrade? Is it possible to get an Intel processor installed?
Thank you
LindsayActually you can upgrade to snow leopard. I have an iMac G4 and upgraded to snow leopard by installing it using an external DVD RW drive. It was complicated but it worked. I ended up going back to using tiger though. I liked it better the simple old school way.
-
What are the reports we can get from OPM Quality
Dear All,
What are the reports we can get it from OPM Quality module.
I am unable to get any reports abouts Tests, Samples specifications.
Can someone please suggest me.
Regards,
JonPl post details of EBS version.
If 12.1.3, see Chapter 7 of the OPM Quality User Guide - http://download.oracle.com/docs/cd/B53825_08/current/acrobat/121gmdqmug.pdf
The same guide for other versions can be found at http://www.oracle.com/technetwork/documentation/applications-167706.html
HTH
Srini
Maybe you are looking for
-
how do I STOP this from updating to NEW VERSION? I am getting tired of uninstalling and reinstalling every 10 uses. Ver.10 is Garbage!!!!! WHEN it decides to run it does NOT member passwords. And besides, if I WANTED NEW I would DOWNLOAD NEW!!! ''[Pr
-
Default Code Generation for a Custom Class for an Application Module
hi all Oracle® Fusion Middleware Fusion Developer's Guide for Oracle Application Development Framework 11g Release 1 (11.1.1) with Jdeveloper TP3 , By default, the application module Java class will look similar to what you see in Example below when
-
Sorry, this page was not found.
I've been getting the 404 error almost every day when navigating in the forums. There is no link in particular that causes it. It can happen in any forum and when clicking on any thread to read further. After I get the 404 page, I cannot get to any p
-
Problem with a text in the last page of XML Publisher Template
Oracle Applications : 11.5.10.2 Oracle BI Publisher Template Builder for Word 10.1.3.4 Build 129 Hi, I have a problem with XML Templates, I need that a text (*Este documento no confiere origen, señala únicamente país de manufactura.) is always at the
-
Picture changes when I close and restart.
I have been retouching old Census pages of my family. I get the lines all straigtened up I close it down and the next time I open it up the lines are all jagged and the beautiful straight lines of solid color are changed into multiple . Is there a wa