What RAM works with KT3 Ultra (Orig) ????

Hey there,
SORRY BIGDADDY. Come to find out a new board
did not fix the prob I am having probs with the OS. Not
only that but several other programs don't work
like burning software, drivers, and the new DX won't
even install right. I figured NEW CPU...but as you can
see I need NEW RAM. So instead of buying PC133 for
almost the same price I figure get some DDR 2100 for
about $10-20 more and the KT3 is $10 more. Do the
math here and I could substantially increase my comp
considerably. :D
Foreveryone out there I need to know what ram works
with the KT3 Ultra. I know this board is very picking
about ram since the AMI bios is the issue.
I am looking at these:
1) Kingston PC2100
2) Crucial PC2100
3) Micron PC2100
Thanks in advance for any replies
SladeZero980
I also got a XP 1600 + for $66 from NEWEGG

OK I found a few minidumps in the event log
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xde1d3ee0, 0x00000000, 0x804eef61, 0x00000000)
Error code 10000050, parameter1 e262ca7a, parameter2 00000001, parameter3 8053cb3e, parameter4 00000001.
Error code 1000008e, parameter1 c0000005, parameter2 8053cbb1, parameter3 ee5b1a40, parameter4 00000000.
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xe1fe9a18, 0x00000000, 0x8053cbb1, 0x00000001). A dump was saved in: C:WINDOWSMinidumpMini030703-10.dmp.
Hope these help

Similar Messages

RAM problems with KT3 Ultra 2 causing STOP errors in XP

I've run the NEC ncramtst program on my PC and its coming up with an error in the extended memory at adddress 1B8EE01C which probably explains the stop errors and problems I've been having in XP...
I've tried reseating the RAM and tried a different slot but it still returns the same error.
The PC is only 2 months old and I have only experienced stop errors in the last 2 weeks or so and usually are at random - and occur more often when copying files - or putting load on the PC.. any ideas why the RAM is only now causing errors and what the problem is?
Are the problems definatly being caused by RAM or could it be the motherboard?
Thanks in advance
Ben
MSI KT3 Ultra 2
AMD AlthonXP 2400+
512Mb PC2700 DDR RAM (with errors)
80Gb Hard drive
Geforce Ti4400 Graphics card
Modem
LAN

OK I found a few minidumps in the event log
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xde1d3ee0, 0x00000000, 0x804eef61, 0x00000000)
Error code 10000050, parameter1 e262ca7a, parameter2 00000001, parameter3 8053cb3e, parameter4 00000001.
Error code 1000008e, parameter1 c0000005, parameter2 8053cbb1, parameter3 ee5b1a40, parameter4 00000000.
The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xe1fe9a18, 0x00000000, 0x8053cbb1, 0x00000001). A dump was saved in: C:WINDOWSMinidumpMini030703-10.dmp.
Hope these help

Ram Problem With KT3 Ultra

Hi Guys,
I have posted on here before.
I have a kt3 ultra mobo.
The problem i have is when playing games the system locks up and i have to hard restart.
I have followed advice from this board the the faq ant mobo bios set up which sadly has not solved the problem.
Very strange but in the pc i have two x 256 meg ddr ram.
If i take either stick out the pc plays games perfectly. This is frustrating as both sticks work fine on their own but not together.
ANY IDEAS ? ;(

Hi,
Sometimes it happens that sticks just won't work together....
You might want to swap one of the sticks with a friend to see if the problem is gone...

Will Kingston's HyperX RAM work with my Mac?

I want to know if the Kingston HyperX RAM work with my Mid-2010 2.4GHz 15" MBP?
The 8GB version with this name: KHX1600C9S3K2/8GX
http://www.kingston.com/hyperx/products/khx_sodimm.asp
Also, what is the biggest capacity USB 3.0 Flash stick there is?

The only products on that page that meet the specifications for your MBP have been discontinued. Don't buy any of the others. Use only RAM that has the specifications Apple recommends. You will gain no benefit and may experience instability and unreliability if you use faster RAM than is recommended. It should clock down and work, but it doesn't always. And of course you'll pay extra for it.
As for USB3 flash drives, is 256GB big enough?
http://www.amazon.com/Super-Talent-SuperCrypt-Flash-ST3U56SPS/dp/tech-data/B003S E6E00
Message was edited by: eww

Can someone post a chart showing what adapter works with each device?. I have one of each and I am getting confused.

Can someone please post a chart of what adapter works with the different devices? I have a MacBook air, I-pod, I-pad, and I-phone 4. I am getting my adapters mixed up.

Macbook: https://www.powerbookmedic.com/xcart1/images/D/macbook-air-adapter.gif
All iDevices until 2012 (excepting 3rd generation iPad) used the 30-pin connector: http://igyaan.in/wp-content/uploads/2012/01/idevice-30-pin-connector2.png
Newer iDevices: iPhone 5, iPad 4th generation, iPad Mini, and iPod touch 5th generation use the Lightning connector. If you do not have one of these devices, it does NOT use Lightning. http://www.macobserver.com/imgs/teaser_images/20120912lightning_connector_usb.jp g

What apps work with iOs 3.1.3?

What apps work with iOs 3.1.3? my friend just gave me her old ipod touch 1st generation and i am trying to find apps but like everythingggg is too old

Skype-08101284207.ipa
OperaMiniWebbrowser-071012123842.ipa
Facebook-071012123155.ipa
Dropbox-08101281032..ipa
PandoraRadio-12121295346.ipa v4.0.1 I live outside USA so I use the free US VPN tunnel (SecurityKISS.com free Plan GREEN 300 MB/day, setup VPN on iPhone as PPTP). See also the Internet Radio Box alternative below working without VPN.
eBay-071012123544.ipa
IMDbMovies&TV-071012124037.ipa
Adobe Photoshop Express
QuickOffice Connect v3.30
iPusher - To check if Push Notifications is working: [Solved] whited00r 6 Unlocked Push Notifications Quick Fix
Panoramatic360-08101282736..ipa - Stitch photos into panorama automatically.
AudioTools-1411121522219.ipa
LargeAperturePro
PhotoEditor-Fotoir
Catculator-141112152900.ipa
CyclemeterGPSCyclingComputer-071012195003.ipa
Dr.Xlator-MedicalSlang-141112154137.ipa
DoodleJump-091012140102.ipa
Geekbench2-08101281342.ipa
GetRunning(Couchto5K)-141112155955.ipa
Gramophone-141112160427.ipa
GuitarPlayerClassic-141112160521.ipa
HandWritingMail-061012153657.ipa
iAngleMeter-071012123403.ipa
NetStatus~remoteservermonitoring-061012153521.ipa
SiteSucker-221112230322.ipa
TempleRun-291012141909.ipa
Camera+-091012135921..ipa
CameraGenius-08101280149..ipa
FakeCall-141112154915..ipa
GoogleSearch-071012172607..ipa
GoogleTranslate-061012153127..ipa
Justin.tv-041112102027..ipa
mix.djPro-061012150724..ipa
MobileRSSPro~GoogleRSSNewsReader-071012123244..ipa
NetNewsWireforiPad-12121293750..ipa
NinjawordsDictionary-271012153519..ipa
PocketDJ-061012153206..ipa
RSS Reeder-291012132923..ipa
SoundHoundì-071012200259..ipa
Wikipanion-061012154615..ipa
WolframAlpha-071012195603..ipa
Portal-FullScreenBrowser-010113214933.ipa
ShoppingList-010113165542.ipa
SystemStatus-activitymonitor,networkinfo,batterycharge&memorymanager-01011316092 2.ipa
hope this helps.

Problems with KT3 Ultra (MS-6380E)..please help

Hey all-
Here is my system configuration:
MSI KT3 Ultra MS-6380E) motherboard
AMD Athlon 2100+ XP cpu
(2) 512mb PC2700 DDR ram (1 gig total)
(2) 120gb Western Digital 7200rpm Harddrives (240gb total)
Nvidia Geforce Ti 4600 video card
Creative Labs Sound blaster Audigy Platinum
LG 32x10x40 CDRW
16x DVD ROM
400 watt power supply
Here is my problem:
Just built the machine, checked every plug and everything and when I turn on the machine I got no screen, no post, no beeps, nothing.
So I turned the machine, and cleared the CMOS. Turned the machine back on and got post , went into the BIOS, set the time,date, yada yada, all the drives were detected fine. I went in the Frequency/Voltage Control screen and the "CPU FSB Clock" was set to 100 mhz, "CPU Ratio" was set to Auto as was the "CPU Voltage, DDR Voltage, and AGP Voltage". I saved settings and rebooted but then I didn't get a screen, no post, no beeps.
I tried clearing CMOS again, turned machine on, got back in the BIOS just fine. I tried setting the CPU FSB Clock to 133mhz and left everything else on Auto. Rebooted and once again ..nothing.. no screen.
I don't understand what the problem could be. It seems that I can only get a screen when I clear the CMOS. But even if i use the "Load BIOS Setup Defaults" or even the "Load High Performance Defaults" I still get no screen or anything when I reboot.
Can anyone help me here? I have never run into this before.
Thanks in advance!!
Joe

If it is only doing it when you turn your bus speed of 100 up to 133 for the xp processor then I have had the problem. If you are booting with a bad cpu that isn't working properly (can't run at 133) then the computer will not POST. As soon as you clear the cmos it sets the speed back down to 100 for failsafe. If you try to boot a duron processor like a 700 or something on fsb 133 then the motherboard won't post. Make sure you don't have a duron processor instead of a athlon xp or a bad cpu. I would recommend taking it to the place you bought it or else an autorized amd spot. They should be able to throw in another proc and check it out.

Help with kt3 ultra

I just brought a KT3 ultra today. And I got a black screen(the mouse didn't show up) is after logon screen (the bar the moving under the windows)
here is what I use
KT3 ultra
PC2100 512 ddr-ram
evga gforce 2 MMX-400 64MB
T-bird 1400mhz
IBM 60GB harddisk
40x cd-rom
I had try to install the new bios for motherboard, format my harddirve and reinstall the windows xp... and I still can't get into windows.... I can only get into safe mode with network connectation.
I also disable the raid from the motherboard
and disable all the service in the msconfig.... but it still doesn't work... can anyone help.... plz...

yeah I disable the aspi already....
and i didn't overclock it...
I can boot up with the windows sometimes... (by keeps trying to reboot.... ) but the graphs is not right...
like the icon on the start button... it will change longer if I click on it
also.... when I am open the system in control pannel, it tells me that I am using 2.xx mhz and 3xx mb ram...
I am going to buy a new cpu and graphs card now to see is that work...

Problems with kt3 ultra + radeon 9800pro

hey guys,
heres my story (bare with me)
i bought a radeon 9700 pro around christmas time, recieved it, (almost) everything worked fine on it, etc etc. however in games, it would give me this weird flickering poly thing going on (screenshot included) after seeing this, i stuck an extra fan in my case, thinking it was a heating issue. no worky. after that i just assumed the heatsink/fan wasnt securely on the chip. whatever.
anyway, i returned the vid card, got my money back and just decided to sit on the extra money for another couple of months and let prices drop a bit.
soooo i order myself a radeon 9800 pro this week. i get it today, and im getting the EXACT SAME PROBLEM. so obviously it wasnt a heat issue, it was.. something else.
this is where you come in anyone have ANY ideas why i would be having this problem? im attaching a screenshot i snagged of what the error looks like (if that will help at all)
i have already tried running driver cleaners, blah blah blah. i even reformatted and reinstalled windows on the drive, and im STILL having the same problem. not to mention i get occasional lockups and bluescreens.
ive tried flashing bios, updating mobo drivers nothing fixes it.
is this just some quirky incompatability between the mobo and the vid card or what? (i had a gf3ti200 in here before the 9800pro.. never had any problems)
so can anyone help or am i just going to have to buy a new motherboard?
msi kt3 ultra
512 pc2700 ram
80 gig wd
ati radeon 9800 pro

"DOS'ish" ?
start with flashing the latest mobo bios before you start if you haven't allready. I recommend stick with the 3.7 Cat driver (many people are reporting worse problems with the later rev Cat drivers) and follow these directions:
1) download and install the latest via driver (i know, you have it)
2) download and install latest soundblaster driver (if you are using a soundblaster audio card of course)
3) download and install catalyst 3.7 driver/control panel/samartgart from ati.
4) disable fast-write in bios (this was causing corrupted icons and cursor in windoze).
5) go to c:\programs\ati technology\ati control panel and execute smartgart (it's a link)
6) enable - pci read/write and agp read (probably allready is enabled).
7) disable - agp write (default in my case was on causing lots of stability problems in games).
"apply", reboot, then "ok".
above solved all my probs w/9600 pro and msi kt3 ultra-aru
good luck!

Sound problems with KT3 ultra

Hello All
I have a KT3 Ultra, WinXP Pro, LG CD-RW (HL-DT-ST CD-RW GCE-8160B ), 512 Mb DDR Ram etc.
My problem is that when i rip cd's to MP3 i lose all sound. This has happened with Easy CD-DA and Exact Audio Copy.
If I go into AC'97 Audio config all speakers seem to work exept the Front Left and Right. But this seems to stop them all from playing any audio.
Reinstalling AC'97 fixes it but it's a bit annoying.
Audio driver : 5.10.0.3840
Audio controller : VIA 3059
AC97 Codec : ALC650
Any help appreciated
upinsmoke

I think i solved it by installing the 5.10.0.4050 drivers.
upinsmoke
cant seem to change the thread description to SOLVED

Problem with KT3 Ultra/AMD 2100+ temp

hi,
Im not too familiar with motherboards but i know when there is something seriously wrong. I have a MSI KT3 Ultra motherboard with a AMD XP 2100+ processor. My computer normally ran at a CPU temp of 45C, but today I installed the new version of PC Alert 4. All of a sudden my CPU temp increased 15C. Now its running at 60C, which i think is too high. I havent changed anything else, and nothing has been overclocked. I have a Geforce 4 Ti 4400 and 512mb RAM. Please help.
Thanks in advance

Quote
PS: anyone else have any other ideas? dont wanna be ungrateful but i dont think thermal paste stops working within a 2 hour period all of a sudden.
No it wont, but it has probably been running at that temp all along.....Maybe your first PCAlert was just giving false temps........Did you ever check it in the bios before?

Max "benefit" with KT3 ultra 2 and XP 333 cpu?

The KT3 ultra 2 board is based on the KT333 chipset and will support an XP 333Mhz(FSB) processor, but I'm a little confused about whether I can get the max performance out of an XP 333 chip with this mobo. I kind of remember seeing a discussion about this about a year ago when I bought my KT3 mobo and XP 1900+ 266(FSB) processor.
I guess my question basically is with a KT3 mobo and an XP chip with 333 FSB, which will be the "bottleneck"? Or are they really running at the same speed?
Thanks,
Chris

Quote
Originally posted by 1wingman
The KT3 ultra 2 board is based on the KT333 chipset and will support an XP 333Mhz(FSB) processor, but I'm a little confused about whether I can get the max performance out of an XP 333 chip with this mobo. I kind of remember seeing a discussion about this about a year ago when I bought my KT3 mobo and XP 1900+ 266(FSB) processor.
I guess my question basically is with a KT3 mobo and an XP chip with 333 FSB, which will be the "bottleneck"? Or are they really running at the same speed?
Thanks,
Chris
the benefit would be that you can run you cpu at 333 along with your ram at 333 no bottle neck!!!
but with the 266 fsb processors if you ran your ram at 333 and cpu at 266 the cpu is is the bottle neck!!!

Big problem with KT3 Ultra (ms-6380e v1.0) after flashing the BIOS (de

Hello out there.
I have a real complicated matter with my Kt3 Ultra board.
Used to work fine, but after I flashed it with the latest BIOS (5.7), the board has this strange behaviour: when I clear the CMOS, the board boots up, when I change & save the settings, the board does not "come to life"(black screen & beeper silent).
It has also this weird problem: it shows garbage charaters on the voltage setting of the CPU. Instead of voltages (i.e. 1.750 etc. etc.) I have only "scrambled" strings.
I had MANY difficulties in upgrading the BIOS because the AMI-flashing utility kept telling me "bios protection enabled) (but there was NO bios-protect setting in the previous bios - I checked a zillion times)...but after trying with different revisions finally I made it.
I already tried everything (re-flashed older bios-es etc. etc.)and I'm starting to feel beat ... if you have any advice, please le me know.
It would be really SAD to put this great board in the garbage-dump....
Bye,
Wyk'03

im having problems with this board as well,
i had no problems with the flash,
i did this...
boot to win me floppy,
copy the flash files to ramdrive, flashed to latest bios..
now windows hangs when i have my ac97 audio enabled in bios...
I WANT MY AC97!
hmmm can you get to a dos prompt from a boot disk?
try re-flashing with 1.0 again and then disable the cmos virus protection thingy, and yes it was there it was in the 1.0 bios on the main screen.

Audio Problems with KT3-Ultra MB

I have the KT3-Ultra MB and I am trying to set up a four speaker setup using the sound manager utility that came packaged with the board. Regardless to which setup I select from the utility which configures the 3 onboard sound jacks, I cannot get any sound from the second (rear) port. Has anyone else encountered this issue or know how to fix it?

I own 2 sets of speakers. One is a set with 2 satellites and a sub that (The slender black satellites from Altec Lansing I think) and I have another set consisting just of 2 satellites also from Altec Lansing. Both sets terminate in a simple headphone type jack. Either set works when plugged in to the first audio port labelled for front audio, but neither of them works when plugged into the jack configured for rear sound.
To test them I am using the Sound Manager utility that is packaged wit6h the MB that shows a picture of your setup and allows you to click on each speaker and it sends a sound to the speakers individually, allowing you to hear which ones work and whatnot. I have tried uninstalling and reinstalling the sound and I have downloaded all of the latest drivers from this website...
This thing is starting to get frustrating....

Fan monitoring with KT3-Ultra 2 (ignore prev post)

Ok ppl, here's the deal,
just contacted MSI and apparently the KT3-Ultra and the K7T-266 Pro2A use the same PCB (different northbridge thoguh... not sure about soutbridge) and they do not support fan speed modification...
i'm still waiting on an answer for the KT3-Ultra 2-R
can anyone with this board verify if fan speed changin in windows works?
regs
kurt

No, my Ti4400 is not the Champ ed. The actual model number on it is 8871 ver-1.00. You can read about my problem's in the "Have you seen this?....." thread on this forum (page 7 now I think)
I haven't had a problem in the last couple days though. I removed some Reg tweaks (this is a DAW box) and ....dont luagh, turned up the heat in my house. I'm not sure if it was the Reg edit or Temp, but things are working ATM.
Nice to know I'm not alone though,
C

What RAM works with KT3 Ultra (Orig) ????

Similar Messages

Maybe you are looking for