What recording audio interface to use with iMac G5 1.9 1GB

Hi,
I need an audio (USB or Firewire) interface to start using my new iMac in my home studio. That's why I ordered my G5 17 inch 1.9 Ghz with 1GB of RAM.
There are many on the market like Digidesign's Mbox 2, Motu traveler etc., but what can I expect from my G5 performance-wise? If it's limited to two simultaneous tracks because the hard drive can only cope with that, I don't want to spend a lot on an audio interface that supports a lot more.
I'm sure there are lots of mac users out there who record music.
My goal is primarly home studio use, but if I can track my band with four microphones in the practicing room, that would be nice, but not essential.
But minimally I need to record two or three simultaneous signals while playing back up to four/five already recorded tracks.
I would appreciate any tips (as well as on the software, Garageband is too limited already after a couple of weeks of use to get used to my new Mac, which by the way is great).
THANKS!!!
iMac G5 1.9 17in 1GB   Mac OS X (10.4.2)  

Since it appears you need multitrack recording capabilities, I suggest searching for that kind of software on:
http://guide.apple.com/
http://www.versiontracker.com/
http://www.macupdate.com/
You might also want to check the various Pro and Applications software Apple makes to see if it does what you need:
http://www.apple.com/software/

Similar Messages

  • What is the best audio interface to use with Garageband?

    I just bought a new iMac last week.  I have several instruments I want to record using Garageband.  Is there a USB/Thunderbolt audio interface that someone recommends?  I'm looking at 4 inputs at the very least.  Thanks!

    right....
    first of all do a search in this forum. This question has been asked numerous times.....
    if you're still unsure then when you post again it could be an idea to tell us:
    1. kind of music you make.
    2. The number of inputs/outputs needed (e.g. are you gonna record a 6 piece band simultaneously?)
    3. Your midi needs.
    4. The number of keys you would prefer on a midi keyboard
    5. whether you would like a lot of buttons and knobs
    6. your budget!!!
    otherwise i might suggest an apogee ensemble which is tres expensive - but it is one of the best interfaces for logic pro
    I don't mean to rant, but the more specific info you give, the more specific info you'll get. But if you haven't even done a simple search on these forums for five minutes then why will others spend five minutes to help?
    one other tip: stay clear of m-audio audio interfaces with Logic.
    Hope that helps
    Rounik

  • Whats the best Audio Interface to use with Logic and MacBook Pro?

    I currently own a Line 6 Pod X3 Pro and although its much better than the Eleven Rack (what an overrated piece of junk in a pretty candy coating, more fizz than club soda and still no balls. Some say it just needs a cheap overdrive box to do the trick. I say how can it possibly be worth a Grand if a cheap added piece of equiptment is needed to improve the sound?) It's still not exactly top notch, to say the least.
         I was really considering the SSL (Solid State Logic) XLogic Alpha-Link MADI, a 24 channel high-end AD/DA Converter. It's somewhat pricy, but you can't possibly find a bigger bang for your buck, however I don't really need that many channels. I'm really going for quality over quantity, but I'll pay for the extra inputs if there's no way around getting top of the line otherwise.

    Thanks but I already figured it out, or rather B&H did for me. Firstly, to use the SSL with a DAW you'll need to use the Extreme "PCIe card" which neither notebooks or iMacs accomodate. So unless I want to dish out an additional $1,500 for an RME laptop interface (with built in PCIe card) for this interface i'm shoot out of luck, boo! I was really looking foreward to that set up.
        However, to answer my own question (and save a couple hundred bucks) you simply can't beat Apogee's Ensemble, which is built specifically for Mac. Much simpler - no drivers needed, and I actually understand the specs, 16 channels, and 4 of which even have transparent mic preamps. And its only $200 more than the Rosetta (only 2 channels, and nothing but converters - no preamps).
         The main thing I also wanted was to have as least components as possible going into Logic. I already passed my "gear collecting phase," and the more I added the worst it sounded. I was already forewarned of such results, but when your a newbe like I was I guess you have to find out for yourself. So I'll be getting rid of my Line 6 POD X3 Pro; dbx 1066; Presonus Eureka; Aphex 204; and 8821 Sonic Maximizer ( I already got rid of the 11-Rack, good riddence!
       And replacing them all with an Avalon 737 - anything that sounds that good over YouTube has gotta kill - and the guy from B&H said "thats one SWEET set up!" Of course every body knows Apogee and Avalon are no brainers (if you've got the patience to save up for the good stuff) but I'm more of a best kept secret type of guy (or try to be) however this time I don't mind conforming. Taylored quality and simplicity...Perfect...what more can a guy (or girl) ask for (now if I can only get my hands on some Vienna Symphonic Orchestra Software to pick up the slack where Logic is lacking.)
        I just want to stop with the learning every new gadget nonesense already and get back to being a musician again.
    PS How do I switch this topic to the Logic forum? I'm sure it will be more helpful to others there.

  • What is the best audio interface to use with Lion?

    I have used Tascam for quite a while, but they are not offering drivers for Lion. I don't want Apogee. What are good alternatives?

    I researched this for a friend 3 month ago. The only reasonable priced company up to date with drivers was
    PreSonus (FireStudio Project 8 inputs $400), they have smaler units too. Evrybody else is dragging their tales with drivers unless you want to go (slower USB) I have Alesis iO|25 great firewire interface, stay away! No driver-upkeep at all. I only buy from a company with regular driver updates. I wish Apple would take over on that.     Good luck.
                       W.W.

  • What optical audio cable to use with Mac Mini (late 2009) to receiver?

    I want to do the following (removing TiVo for something else is NOT an option, EVER):
    1) I want to watch TV through my HD TiVo (better than sex, better than chocolate, better than sex, chocolate, and anything else you can combine together).
    2) I want to watch DVDs plus iTunes videos plus listen to iTunes audio through my Mac Mini.
    3) I want to have digital optical audio (TOS?) 5.1 dolby for both
    On the Mac Mini it says it has digital audio out. Isn't that the same thing as digital Optical audio out?

    You need a regular optical digital cable, often called a Toslink, with a 3.5 mm miniplug adapter on the Mac mini end. The port is a combo port. When you insert the optical cable's miniplug into the port, because it is a tiny bit longer than a regular 3.5 mm miniplug, it activates the digital audio. Usually the port's output is analog by default.
    Dah•veed

  • For guitar, vocals, keyboard/drumpad controller, what is the best audio interface to use/record quality sound in Logic, Mainstage, Garageband, etc. (lowbudget)?

    So many to choose from. im really just trying to record clean sounding electric guitar tracks now vocals in the future and keyboard/drumpad controller near future..(irrelevant but thought i should mention im in the market for a keyboard and drumpad controller combo hopefully will be usb or something) but i need a quality audio interface to use with Logic Pro 9 and all the stuff that comes with it (mainstage, etc) and also Garageband. I have heard so many different reviews about this or that but all in all i dont think i can afford an apogee except maybe the apogee One but it at 249 or whatever i feel like i could get alot more bang for my buck. Ive heard alot of good things about m-audio gear but i heard mixed reviews as well. If someone can just tell me what is the best interface in the 100-200$ range for the needs ive listed above...Any responses or advice greatly apprecitated.
    Thanks
    -J

    hi mm
    there are so many different sound cards out there these days it seems - ill just say that one that i got alot of use out of was the tascam 122 (http://www.tascam.com/Products/US-122.html)
    it has 2 decent phantom powered XLR inputs, some midi stuff, a place to plug a guitar into and some nice big knobs.
    the next level would be something with more ins (8 or 10) and probably firewire, and also around $400 i think.
    oh, and your computer should be more than sufficient to handle what you want to do.
    G4PB1.5GHZ12INCH125RAM Mac OS X (10.4.6)

  • BEST PRINTER TO PURCHASE FOR USE WITH IMAC OSX LION V 10.7.4

    I NEED TO KNOW WHAT PRINTER IS BEST TO USE WITH IMAC RUNNING OSX LION V 10.7.4. THERE WERE NO SUCH THINGS AS COMPUTERS WHEN I WENT TO SCHOOL. I AM A NEW APPLE/MAC USER. SO PLEASE I AM IN NEED OF A ALL-IN-ONE IF POSSIBLE BUT IF THERE IS SOMETHING THAT IS VERY EASY TO USE WITH IMAC OSX LION 10.7.4 AND A USB CABLE THATS OK TOO. THE CATCH IS MY PRINTER DIED SO IT NEEDS TO BE PURCHASED AT WALMART TONIGHT. SO I NEED SEVERAL POSSIBLITIES PLEASE HELP THANKS, JDLASK

    JDLASK wrote:
    I WOULD RATHER NOT PAY MORE THAN ABOUT $125.00 IF POSSIBLE.
    Please don't use all Caps. It's considered shouting. And please don't keep doubling up on your posts.
    Thanks
    Pete

  • Whats the best audio interface to use w/new Imac?

    Hey now! I;ve just bought a brand new Imac 20"
    and I'm wondering whats the best Audio interface to use w/ garageband? Also firewire or USB. I want record guitar,bass, vocals, etc.. thanks!

    You may want to ask this question in the GarageBand forums.
    USB is cheaper but Firewire is generally better.
    PreSonus is a good brand and I think they are class compliant, so no driver needed - plug and play.
    M-Audio is another popular brand. Sometimes may have driver issues, though.
    But a lot depends on your budget and what your needs are. How many input will you need, etc?
    If just for solo recording then the PreSonus Inspire would be good. For a full band their FP10 (Firebox) is great.
    Check out this site to get you started (lots of great GB info too):
    http://www.bulletsandbones.com/GB/Interfaces.html
    Also check Sweetwater, MusiciansFriend for interfaces.

  • What audio interface works best with Audition cs6

    what audio interface works best with Audition cs6

    It depends on how much you want to spend and how many channels you want to record/playback at once. So any decent (normally) external audio interface should do provided it also has robust ASIO drivers for your operating system. Don't go  for a gamer's interface though as they are not optimised for audio recording.

  • What is the best printer for use with iMac osx lion 10.7.4

    What is the best printer to purchase for use with imac osx lion 10.7.4. Preferably an all-in-one with wireless capabilities. around $125-$150

    JDLASK wrote:
    I WOULD RATHER NOT PAY MORE THAN ABOUT $125.00 IF POSSIBLE.
    Please don't use all Caps. It's considered shouting. And please don't keep doubling up on your posts.
    Thanks
    Pete

  • My audio interface not working with my IMac

    My audio interface not working with my IMac

    Have you tried > Apogee Electronics > Apogee Support & Product Downloads

  • USB Recording Audio Interface levels are visible but no sound.

    I have a Focusrite Scarlett 2i2 2 In/2 Out USB Recording Audio Interface hooked up to my iMac via USB cable.
    On the System Preserences Sound Page, the computer recognizes the device and levels are visible.
    But there is no sound coming out of my internal speakers/headphones.
    I tried recording some music and it recorded fine and played back fine, I'm just unable to monitor the sound as it's coming in.
    I've also tried a completely different device with the same outcome.

    No, you have every business being here as any help is greatly appreciated.
    When you say "core audio" what are you referring to?
    Ok, here's what I see in the system preferences->sound window:
    Output is set to Internal Speakers
    Input is set to my device, the Scarlett 2i2 USB
    When I play sound thru the device I can see levels where it says 'Input level'.
    Now here's the MIDI setup->audio devices window:
    Input is set to Scralett 2i2 USB (hightlighted in the left window with a microphone icon next to it).
    just below that it reads 2 in/ 2 out
    Output is set to Built-In Output (hightlighted in the left window with a dual smling face box icon and a speaker icon next to it).
    just below that it reads 0 in/ 2 out
    On the right is the Ch/Volume/Value/dB/Mute wondow
    Master volume slider is in Light Grey and un-slidable
    1 and 2 are Dark Grey and slidable.
    That's pretty much it, sound comes in fine yet no sound from interal speakers.
    Now I feel a crying spell coming on. Excuse me. Weep weep weep........

  • Which is the best MIDI interface to use with Logic 7 ?

    Hi folks :o)
    Firstly, thanks all for any advice you can give. I'm a pro user, but right in the middle of a major upgrade (G4/OS9/CubaseVST32 >> G5/OSX/CubaseSX3/Logic7) & feel a huge learning curve coming on!
    The situation is this:
    I have a Steinberg Midex 8 midi interface, plus a MOTU MTPav in the cupboard. The Midex took place of the MTPav because it had much better midi timing under OS9 with Cubase... The Midex8 drivers for OSX, however, are still beta & a pile of rubbish. (It keeps losing communication with the G5.) I'm fed up with how bad Steinberg have been sorting (not!) these problems out (not to mention the fact that Cubase SX3 can't recognise my 'studio' created in Audio Midi Setup either.. arghh!), so I'm considering jumping ship & going entirely to Logic in one hit, plus whichever is the best midi-interface for this software & OSX.
    As food for thought, I'm currently thinking of tracking down a 'Unitor 8', having made the (perhaps wrong) assumption that it'd work 'best' with Logic seeing as it was made by Emagic. BUT, despite a lengthy search in Logic 7's manuals & this forum, I can't find any mention of Emagic's 'Active Midi Transmission' protocol & whether or not Logic 7 supports it; AMT is the only reason I'd buy the Unitor. (I've got all the other bases covered with the MTPav.) I'm also concerned about the long-term support issues regarding drivers for the Unitor 8 & OSX; ****, I'm having enough problems with Steinberg & their Midex 8 (which is still a current product in theory!) without throwing Emagic & a midi interface that's no longer manufactured into the pot...
    So..... What do you folks feel is the best midi interface to use with Logic 7 as regards tight midi timing & system reliability? Can anyone out there with a big midi setup categorically say "I've got one (or more) of these MIDI interfaces, it works beautifully under OSX & Logic 7, & the MIDI timing is rock-solid, even when put under heavy midi 'duress' " ??
    Many thanks again in advance for any feedback!
    Your new Logic Pro virgin ;o)
    Jason

    Thanks for your reply folks. It's good to hear a number of you are having good results with your MTPav - I guess I'll pull mine out of the cupboard in that case!
    As an aside, it's been interesting to note how difficult it's been to get a clear answer from companies (be it shops or Apple) as to whether or not Logic 7 supports 'Active Midi Transmission' on the old Unitor 8 MkII..... (The reference manual has one mention of it in the index, yet points to a page that doesn't say anything about AMT at all!)
    If anyone here DOES have a clear answer about AMT with Logic 7, I'd be very interested to hear about it... thanks.
    Kind regards,
    JC

  • What capture device can i use with ps3

    What type of capture recording device can be used with my iMac and PS3?

    Hello Bill,
    Sony Creative Softwares have their own separate community and so are best qualified to address any issues or questions you may have on creative softwares. It is a peer support area where you can share tips and advice with other Sony Creative Software product users:
    http://www.sonycreativesoftware.com/forums
    Thank you for your post.

  • Fastest and best external hard disks for video use with Imac?

    What is the fastest and best external hard disks for video use with Imac (I believe it is currently not possible to use Esata on the Imac).

    For DVCam. HDV etc, I'm a fan of the G-raid drives. From personal experience they
    are very solid performers. I only had one issue with a new drive that was replaced
    next day. They are not the cheapest drives to be found but the build quality
    is excellent. Check out:
    http://www.g-technology.com/products/g-raid.cfm

Maybe you are looking for

  • Issues with iOS 8.02

    Ever since I downloaded 8.02, whenever I try logging on to a site where a user name and a password have to be used, the screen as well as all buttons of my iPad 3 totally freezes after I type two characters of the user name. I have to switch off and

  • Using Sun Appserver 7 deploy tool to package 2 ejbs and their clients

    I have a question on how to package two beans into one distributable jar file and also provide the two associated test clients - each in its own jar file. Any help or suggestions would be very much appreciated. This is what I'm trying to do: I am usi

  • Wait for a few minutes before starting a backgroung step in workflow

    Dear All, I have a requirement where in I have to make sure the user has completed a particular workitem. The workitem is to open the transaction PP02. I cannot make it asynchronous and use a terminating event as I could not see any logical place whe

  • How to move / hide obsolete BEx queries

    Hi, We have a lot of obsolete BEx queries on our BW system. We don't want to delete them, but we want them to be hidden from the users. I thought that we could move them to a special InfoArea... Is that a practicable way or is there a better solution

  • Missing Records from SMQ1/RSA7

    Hi Everyone, During the upgrade of BI system, the SMQ1/RSA7 did not clean, which lead to missing of records for only one day from queue. But now the BI system is extracting regular data apart from that day. Can you please help me, how we can get the