What recording option(s) will allow me to snip out portions of the presentation?

What kind of initial recording option(s) in Captivate 5.5 will allow me to snip out portions--a few seconds here, a few seconds there--of the visual presentation? (It seems like I'm selecting recording options that don't permit this.) Also, how do I do this without affecting the background audio track? Thank you!
Paul
[email protected]

are you recording in FMR?
If you're recording in 'automatic' Captivate basically takes a screenshot of your screen/application and superimposes the mouse movement. When something changes or you click, it takes another screenshot. Once those screenshots are compiled you can move and manipulate the screens and mouse movements as needed, including removing entire slides.
The way I understand the Demo, Assessment, Training options is those determine what type of captions and and clickboxes are available in your finished product. Those options shouldn't disable you from manipulating the length of slides, only how the learner interacts with the slide.
If you're using FMR you're stuck with the length of the slide as it's recording 'real time' and you don't have options to manipulate the timeline (well you can make it longer but it doesn't impact the FMR movements).

Similar Messages

Is there an app for iPad which will allow me to read 2 books at the same time? 2 Books side by side.

Is there an app for iPad which will allow me to read 2 books at the same time? 2 Books side by side. For example, one in English and the same book in Swedish. I'd use this in helping me to learn different languages. Any help would be appreciated.
Regards,
LB

Have you searched for one? This is a technical forum. Look for what you want at the iTunes Store.

Is there a plug-in yet that will allow pdf forms to be opened in the browser and submitted?

Is there a plug-in yet for Firefox that will allow pdf forms to be opened in the browser (instead of downloaded), and then submitted to an e-mail address using the submit button on the form? I finally installed the plug-in that allows a pdf to open in Firefox and not downloaded, but the Submit button doesn't work.

Help. Same issue.

Is their app on the iPhone 4s that will allow you to find out the number of a restricted call?

Is their an app on the iPhone 4s that will allow you to find out the number of a restricted call?

Look at this:
http://www.trapcall.com/?gclid=COKgjpKyirICFcqP7QodPTYAMA

Is there a program that allows you to black out most of the screen content of a PDF and slide down like you would with an overhead (covered with a piece of paper)for teaching purposes??

Is there a program that allows you to black out most of the screen content of a PDF (on an iPad) and slide down like you would with an overhead (covered with a piece of paper) for teaching purposes??

Maybe this online manual would help.
* http://en.flossmanuals.net/thunderbird/interface/
Not sure how well printing it out would work, though.

Is there a Button menu option that will allow one view the names of all the buttons already created?

Is there a Button menu option in InDesign CS 5.5 that will allow one view the names of all the buttons already created?

Thanks for your prompt feedback! However, this option does not work for me -- and I'm not sure exactly why.
Originally, when I tried your suggestion, I got the unsatisfactory result illustrated in the following help request: https://support.mozilla.com/en-US/questions/758172
Now I am in the process of testing several new add-ons to fix this problem, and I am getting a very different (and even more unsatisfying) result illustrated in the attached image -- so I realize the problem may now be compounded by one or more of the new add-ons.
(See the attached image that illustrates what happens now when I click on the MyDocs URL after is has been added to my Bookmarks tree.)
UPDATE: I'm going to try the LocalLinks add-on to see if this will help me open local links using my FireFox bookmarks: https://addons.mozilla.org/en-US/firefox/addon/locallink/
Will let you know if it works....

I want to build an AA that will allow for rotating call out profiles

I have UCCX 7. what i'm looking to do is build an auto attendant script so when a caller dials in it will allow for them to reach the oncall person in a different sequence each week\ month. this will need to be triggered only by them calling the ACD access number. I know how the day of week sciprt works just not how to step up the sequencing. has anybody done this before? please respond if you have thank you.
Kind of like this:
Jan 2010            Feb 2010
dial phone 1        dial phone 2
dial phone 2        dial phone 3
dial phone 3        dial phone 1

You can call this script from Applescript (just need to do some escaping of quotes):
This can be run in Applescript:
do shell script "
DestinantionFolder=$HOME/Desktop
MONTHS=(January February March April May June July August September October November December)
for f in ~/Desktop/*
do
     if [[ $( echo \"${f##*/}\" | cut -d_ -f1 ) == \"CLIN\" ]] ; then
          ff=$( echo \"${f##*/}\" | cut -d_ -f2 )
          pd=$( echo \"${f##*/}\" | cut -d_ -f3 )
          date=$( echo \"${f##*/}\" | cut -d_ -f5 )
          date=${date%%.*}
          mo=${date:0:2}
          yr=20${date:4:2}
          Dir=$DestinantionFolder/$ff/$pd/${MONTHS[$mo-1]}\\ $yr/
          if [ ! -d \"$Dir\" ]; then
               mkdir -p \"$Dir\"
          fi
          mv \"$f\" \"$Dir\"
     fi
done"
...is there a way to trigger this whenever a new file is created to check and see if it needs to be moved
Yes, with Automator. When you Open Automator, choose Folder Action
I copied what you did and while the script ran successfully, I don't see any new folders created. Your shell script makes sense; I am not sure why it doesn't create folders.
The script as written only looks for files in the Desktop Folder
(edit by changing: DestinantionFolder=$HOME/Desktop )
To test I created a file on my Desktop
touch ~/Desktop/CLIN_JONES123_JAMES228_LAB_022614.PDF
and Folders were created and the file moved.
(Note: I only tested that format. If the file has any other format, it will fail)

My time capsule will allow only one machine to connect to the internet at a time. Connection sharing is "off" on the Airport Utility. When I try to share an IP address I get the message that "DHCP range that I entered conflicts with the WAN IP address" I

Suddenly, my time capsule will not allow more than one computer to connect to the internet at a time. On the Airport Utility on the internet tab, Connection Sharing is "Off (Bridge Mode)" When I try to change it to sharing an IP address, I get two messages that the beginning and ending DHCP addresses that the DHCP addresses I've entered conflict with the WAN address of my Apple wireless device."
Any ideas?
Thanks

I use a DSL to connect to the internet. The modem is a Westell C90-810030-06. Two things happened in connection with the fail. I upgraded the firmware in both my Time Capsule (connected to the DSL) and the Airport Extreme (connected to my printer--used to extend the network). I also upgraded my Colof Nook to the Android Faux Tablet version. I can't imagine that that is creating some sort of mismatch.
I have now downgraded the firmware on the Time Capsule to 7.4.1 which is what I had before. Fortunately, I found the trick to downloading the older airport utility to find the older firmware. All the older versions disappeared from my computers.
I still have the same problem. Wifi works fine. If a second device connects to the wifi, then it works fine, but the first no longer has a connection.
And my Airport Extreme is not working at all. It cannot be seen by the computer. I tried resetting it. I'm going to connect it by ethernet and downgrade the firmware on it.
I appreciate any help. This is so frustrating.

IPod classic won't turn off when plugged into a home theater dock; what's up? will it hurt to leave it on all the time?

I bought a new iPod Classic and it won't turn off when plugged into a home theater dock. Is this normal and will it hurt the iPod if i leave it on all the time?

Hi there,
How old is your Classic? Often, after a couple of years, rechargable batteries begin to fail, especially after such a long period of inactivity. This happens with any gadget with this type of battery.
Try leaving it plugged in for 24 hours, and try again, to rule out that it isn't just really low on charge. If this doesn't help, it may be a good time to buy a replacement. New iPod Nanos and Touches will be released this October.
Below, I've linked to an Apple website which explains rechargable batteries, and why yours may not be working.
Apple - Batteries
I hope this helps, and I hope upgrading your device will not feel like an unnecessary expense. Let me know if you have any more questions,
Nathan

Is there a debug or show option that will display ipx frame types being received at the router ?

The show IPX traffic command displays a large amount of "format errors".
I suspect there are a number of devices on the network that are set to "auto-negotiate" the frame type.
Is there a debug or show command that would display ipx frame received that are not 802.3 ?

There is indeed a way to do that.
You have to first configure on your ethernet interface,
4 sub-interfaces. Each of them with a different IPX encap and a different network number:
int et 0.1
ipx network 1 encap snap
int ethe 0.2
ipx netw 2 encap ...
Then you enbable "debug ipx packet" and you will see
all the IPX packets whatever the encapsulation is.

Will allow me to sign-out of accounts

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/890263]]</blockquote>
when i open my e-mail/site i cannot sign-out

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/890263]]</blockquote>
when i open my e-mail/site i cannot sign-out

"Reverse Clip" option not showing...not greyed out...not present at all.

I'm trying to reverse a DV clip made with QT that I imported into iMovie 6.
When I select the clip in the clip viewer or timeline and then select the "advanced" pull down menu there is no option for reverse clip.
The only available options are 1) Extract Audio and 2) Paste Over At Playhead.
Am I doing something wrong?

Hi Harry:
I think maybe you are getting 'Revert Clip to Original' and Reverse clip confused...
Revert is under Advanced but...
The Reverse option is in the Video FX choices. It's under Fast/Slow/Reverse
Do you see where I mean?
Sue

Will ios 7 be coming out today after the event or sept. 18?

Please help

The media event is over and Apple said iOS will be released to the public on 18 September 2013

When I attempt to download the lastest OS iPhone update to iTunes, the file is too large for my internet carrier will allow. My max is 400 MB and the file is what about 583 MB? Options? The same is true for the iTunes updates.

When I attempt to download the lastest version of the iphone 4 OS update or the itunes one for the desktop, the file is too large for my internet carrier. It will allow only a 400 MB download versus the download size of 583 MB. Suggestions?

You can download on your work computer, then place the file on your desktop of your home computer, if you want. Then:
Launch iTunes
Option+Click (Mac OS X) or Shift+Click (Windows) the Update button
Select the IPSW update file you just placed on your desktop
Let iTunes update your hardware to the latest version
The .ipsw file is located here:
Windows XP: \Documents and Settings\username\Application Data\Apple Computer\iTunes\iPhone Software Updates
Windows Vista & Windows 7: \Users\username\AppData\Roaming\Apple Computer\iTunes\iPhone Software Updates
You will have to turn on "Show All Hidden Files & Folders" to see it.

Standard Table name which has option of buffering allowed but switched off

Hi All,
Could you please list some standard tables which has option of buffering allowed but switched off ?
Tell me the procedure how to track the tables which have such property other than searching from technical settings ?
Thanks in Advance
Siva Krishna Katta
Yash Technologies

DD09L is the table you are looking for
here, give the parameter buffer allowed = 'A'. and execute. it will show you tables with buffering allowed but switched off.
examples of such tables are CSKS, CSKT and many master tables (T* tables) etc

What recording option(s) will allow me to snip out portions of the presentation?

Similar Messages

Maybe you are looking for