What references are required to access ..i

Hi Curt,
I want to add that from the list of references I used in previous correspondence , NIDAQmxCAPI , IF i AM CORRECT IS RELEVANT.mAYBE THER'S ANOTHER ONE NOT ON THE LIST?Please let me know.
yours
jeff

Your post is out of context. Did you mean to reply to another thread?

Similar Messages

  • HT2476 After updating to OS X Mountain Lion, there is a password locked pdf document in the Downloads Stack. Does anyone know what password is required to access this file?

    After updating to OS X Mountain Lion, there is a password locked pdf document in the Downloads Stack. Does anyone know what password is required to access this file?

    Hello, if your install disk is locked (I assume with FileVault) there is no way to change the password. If it weren't locked there were at least two solutions. As far as I know, the only solutions now are:
    - contact your dad
    - erase and reinstall the OS X clean
    Let us know.

  • What changes are required for OSS note 456507

    Hi All,
    PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
    I’m thinking of just going with the following additions to Role
    AAAB – Cross Application Auth Objects
    S_RFC
    Activity – 16
    Name of RFC - *
    Type of RFC - *
    But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
    Your advice would be greatly appreciated.
    Thanks in Advance.
    Regards,
    Sandhya.

    Hello Sandhya,
    S_RFC is needed in case of making any RFC calls.
    Normally it is needed  for users that are mentioned in RFC destinations.
    As such mostly these users are system/communication users or super users.
    Without giving access to function groups through S_RFC successful RFC call can´not be done.
    Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to  restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
    By global super users I mean users which are used for various types of activites.
    Please award points accordingly.
    Regards.
    Ruchit.

  • What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

    hai friends
    what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
    Thanks a lot
    Regards
    VinayKrishna

    Hi Vinay,
    1. For DP_PROC_TY  you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might  have created.
    2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
    3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
    Ragards,
    RRK.
    Do reward points for useful answers
    Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
    Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

  • What steps are required to configure the Payroll Tax ( USA)?

    Hi All,
    Please answer
    What steps are required to configure the Payroll Tax ( USA)?.
    Thanks in Advance
    Thank you,
    GKReddy.K

    hi Dan
    this is covered in the Rapid Clone documents -- Refreshing a Target System
    Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
    Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
    you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
    adcfgclone will not be necessary on the application tier.
    Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
    Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
    source;- https://forums.oracle.com/thread/652681
    AppsMasti
    Sharing is Caring

  • What roles are required to use Guided Procedures?

    Hi ,
    What roles are required to use Guided Procedures?
    Thanks
    Srinivas.K

    Hi,
        Refer this block  https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
        This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
    Thanks,
    satheshkumar.R

  • What modifications are required to make a servlet support SSL data encrypti

    Hi,
    What modifications are required to make a servlet support SSL data encryption?
    --kumar                                                                                                                                                                                                

    Hi,
    What modifications are required to make a servlet
    support SSL data encryption?
    --kumar No modifications are required in servlet. You have to setup servlet container.

  • What locks are required on a table when Oracle is processing an UPDATE

    What locks are required on a table when Oracle is processing an
    UPDATE statement?

    Welcome to the forum!
    Whenever you post provide your 4 digit Oracle version.
    >
    What locks are required on a table when Oracle is processing an
    UPDATE statement?
    >
    Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
    >
    Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
    >
    The above describes the locks when you, the user, tells Oracle to lock the row.

  • What amps are required to charge an iPhone 5s

    what amps are required to charge an iPhone 5s

    watt = amps *volt
    this mean
    amps = watt / volt
    the ac charger is 5Watt and 5volt
    so 1 amp
    but the phone also charge at usb which in some cases is 5volt 0.5amp == 2.5watt
    are you looking for how further down then 0.5 amps you can go ?
    the lower the amps the slower it charges

  • GRID Control Server (OMS) - what services are required?

    What services are required (and what is the startup order) on the Windows 2003 GRID Control Server (OMS). The target database is 10g on Solaris.

    Hi.
    I assume that you have three folders in the oms installation folder, called oms, agent and db.
    You should first start the grid database on the 2003 server along with the listener from the db folder.
    Than you should install the application server processes by running:
    opmnctl startall from the oms\opmn\bin - folder.
    Than you should start the agent by runnint agent\bin\emctl start agent
    You should further start the agent on the Solaris node and verify the upload to oms:
    $ORACLE_HOME/bin/emctl start agent
    $ORACLE_HOME/bin/emctl status agent
    Good luck
    rgds
    Kjell

  • Hyperion Planning Fusion Edition, what components are required?

    Hello,
    Currently we're planning to install Hyperion Planning Fusion Edition, but we're not certain what components are required if we want to use Planning with EPMA/BPMA. Can someone post a list of components/applications required?
    Additionally, where from can we download Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition, v11.1.1.1.1? The documentation states that such a version exists, however we're unable to locate it on Oracle's web pages.
    Thank you
    Regards
    Marcin Stawny

    Hi,
    You will need the following :-
    Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.1.1.0
    Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.1.0 - Part 1-3
    Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition Release 11.1.1.1.0
    Oracle Essbase Client Release 11.1.1.1.0
    Oracle Essbase Server Release 11.1.1.1.0
    Oracle Hyperion Provider Services Release 11.1.1.1.0 (if you want to use SmartView)
    Oracle Hyperion Planning, Fusion Edition Release 11.1.1.1.0
    Oracle Hyperion Smart View for Office , Fusion Edition Release 11.1.1.1.0
    You can find the files on Oracle edelivery or here
    Cheers
    John
    http://john-goodwin.blogspot.com/
    John

  • What Files are required to install R12 VISION with out Express selection???

    Hi,
    I had installed R12 before, and i could nt received any error. installation was OK,
    Now i am installing in same way on diffrent machine now i am getting error
    E:\oracle\....\visdb\....\temp\oradun91.cmd (Some thing like that). I think i have missed some files.
    this error come at setp 1 of 5.
    when 91 files unzipped successfully.
    I want to know which file is missing. LOG file does not shows the name of missing of folder or directory name.
    What Files are required to install R12 VISION with out Express selection on Windows server 2003.
    so that i extract that file again.....
    thanks a lot
    regards.
    kalash

    Please check the following log files for any further details about the error:
    1) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>.log
    2) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/dbInstall.log
    I assume you are using the same Stage area, so it should work fine no matter what instance you are trying to install.
    What Files are required to install R12 VISION with out Express selection on Windows server 2003What do you mean by missing and required files? As stated above, you should have the complete stage area staged properly.

  • What ports are required to be open on a firewall for UCCX ver7 Backups

    I'm trying to setup a backup location on UCCX version 7.
    The backup storage location and the UCCX server are seperated by a firewall.
    What ports are required to be opened on the firewall to allow the backups through to the backup location.
    Can't find any info online

    Try it locally on the server itself.
    You just need to create a shared directory backup oon the server on C:\ drive.
    \\127.0.0.1\C$\backup
    This should work.
    Link to port utilization guide:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/configuration/guide/uccx70prtuti.pdf
    Regards,
    Chuck
    Please rate helpful posts and identify correct answers.

  • What settings are required for Milestone Billing ?

    Please explain in detail what all settings are required in order to do milestone billing ?
    Regards,
    Gobind.

    Hi
    Milestone Billing.
    1. Create New Sales Order Type, say ZOR (Copy of OR) through T.Code: VOV8
    Maintain Delivery Type as LF & Billing Type As 'F1' - Order Related / 'F2' Delivery Related.
    IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Header > Define Sales Documents Types
    2. Assign New Sales Document Type to Sales Area, For Eg:
    1000 (S.Org) / 10 (D.Channel) / 10 (Division) / ZOR (S.O Type)
    IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Header > Assign Sales Area to Sales Document Type
    3. Create New Item Category, say ZTAN - Copy of TAN (For delivery Related) / ZTAD - Copy of TAD (For Order realted) / ZTAS - copy of TAS (For Third Party)
    Maintain as under (others remaining same)
    Billing Relevance: I
    Billing Plan Type: 01
    IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Item > Define Item Category
    4. Assign Item Category, for ex (assuming Usage & higher level item category as blank):
    Sales Document Type | Item Category Group | Default Item Category
    ZOR | NORM | ZTAN
    ZOR | DEIN | ZTAD
    ZOR | BANS | ZTAS
    IMG > Sales and Distribution > Sales > Sales Documents > Sales Document Item > Assign Item Category
    Note: In the above Billing Type '01' plays the main controller for milestone billing. In Sales order, at item level, we require to maintain the billing plan.
    Follow the Sales cycle as normal sales cycle for particular Scenarios
    Also Refer:
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/erplo/milestone+billing.

  • What roles are required to run the export import?

    Hi,
    I want some info on roles are required to run the export import.
    I have done the following in sys user:
    GRANT EXP_FULL_DATABASE TO IMP_TEST
    GRANT IMP_FULL_DATABASE TO IMP_TEST
    But Doing the above command the IMP_TEST will get all priviles (also the system tables)
    Is there any mechanism to restrict the user to export and import only the tables not anything?
    Thanks and Regadrs

    Hi!
    If you create a user like this
    CREATE USER imp_test identified by password;then the user will be able to import or export only its own schema. If you grant the exp_full_database and imp_full_database roles to this user like you did then the use will be able to export or import the hole database (with SYS schema). But as far as I know you can't set any more restrictions to the user.
    yours sincerely
    Florian W.

Maybe you are looking for

  • Toshiba LX830 - Issues Connecting to the Television

    Hi there, I have a TOSHIBA LX830 PQQ19A-01800R with the Serial Number: XC395277Q I've got the PC itself connected to y LG 3d Smart TV through a HDMI cable, I've checked the settings for security and for filesharing etc and for some reason the televis

  • Sessions getting closed while logging on

    halo friends, could any one tell me,why the sessions are getting closed,while I try to logon my XI system from logon pad? What could be the reason?I have given correct server,system id and system number in logon pad.Still,I am getting that error. ple

  • Having difficulty logging into website on Safari

    I am trying to log into a password-protected website since yesterday.... if I 'clear history and website data', I am able to see the log in form.  Once I've done that, all I see is 'welcome, Tricia' but no form.  I have to click 'clear history...' ag

  • Commerce: adding commerce admin tools

    Hi, I am trying to use the commerce functionality in Portal 8.1. I have installed the commerce services through workshop and tried migrating the commerce admin tools from 7.0. The steps that I have taken are: 1) create a portal 2) install Commerce se

  • Mac mini; Can I display the desktop on the HDMI port

    Hi there, Question regarding the Mac mini I need to have the desktop output shown on the HDMI output (not with the Thunderbold to HDMI adaptor). I need the Thunderbold for a vga screen. Is this possible? Thanks.