What resolution are ipad photos? The ones you take with the iPad itself.
i'm trying to find out at what resolution ipad photos taken on the iPad are stored at. When I send them to myself and choose the largest size possible on the email, they are only 72 dpi. I thought there was an option for 300 dpi?
THanks!
I have a fourth generation iPad...I tried both email and direct download. The photos are largish - 26 inches in width but the dpi is 72. As far as I can tell, that' sustain how it is, I can't seem to find any solid info on it. Thanks for trying, I appreciate it
Similar Messages
-
i want to transfer my music from one computer to another, however a large majority of my songs are already on the new computer, is there a way to transfer only the ones not there? or to see what songs are only on the one computer
Welcome to the Apple Community.
Homesharing gives you the option of seeing only the content in the shared library, that is not already in your own library. -
When exporting to a DVD from Final Cut Pro X, what settings are there to make sure you making the highest quality DVD possible?
There have been a lot of recent reports of difficulties sharing to DVD, but haven't been hearing about unreadable disks. Posibly there was an encoding error. Or it could have been bad media (blank disk).
Does it play in your Mac?
What brand of disks are you using?
Russ -
What resolution should my photos be in Premiere Elements?
Photos make great source files for a Premiere Elements project, but you’ll find the highest quality results and the best performance from the program if the sizes of your photos are properly optimized before you bring them into your project. We urge you to make sure that any photo you use (especially if you use several in a slideshow) has been resized to no larger than 1000x750 pixels before you bring it into your Premiere Elements project to ensure the best quality and optimal program performance. (Photos taken directly from digital cameras can be 20 to 25 times that size!)
At first this may seem to go contrary to common wisdom. Traditionally, the higher the resolution of your photo, the better the quality of the output. But remember that Premiere Elements is a video editing program, and video is a relatively low resolution medium (essentially the equivalent of 640x480 pixels). And, to a point, reducing the resolution of a photo or graphic to be used in a video actually improves the quality of the video output. (1000x750 pixels seems to be that point)
The reason for this has to do with a process called downsampling, the system a video program uses to bring high-resolution photos down to video size. Premiere Elements does a fair job of this – but, as any pro knows, nothing that happens automatically will be as clean or as efficient as what you do manually. “Down-rezzing” is definitely one of these things.
There’s also a more pressing reason for downsampling your photos yourself. The process of “down-rezzing”, like the process of assimilating non-DV-AVI files into a video project, is a very intensive process. So intensive, in fact, that it’s the single biggest reason Premiere Elements fails, particularly during the disc burning process.
It takes a lot longer for the program to down-rez a 4000x3000 pixel photo than it does a 1000x750 pixel photo. Many, many times longer. And would you rather wait an hour or two for the program to transcode your DVD or 10 hours for a process that might end up with the program choking and dying anyway?
Photoshop Elements, by the way, has a very nice batch resizing feature that can resize a whole folder full of photos in just a few clicks. You’ll find it under the program’s File drop-menu, listed as Process Multiple Files.
For high-definition video, you can increase the size of the photos to 2000x1500 -- although you should be aware that this will require much more processing time and computer power than standard definition video.Rene,
For the ultimate viewing on an HD TV, one is best to do a BD Project and then burn to a BD (Blu-ray Disc). Going to any SD format, like DVD-Video will result in having the material up-rezed to fit. This will work to varying degrees of success, and will depend very heavily on the set-top player's uprezing capabilities, plus on the settings on the TV, as well. There WILL be quality compromises, when viewing and SD Project on an HD player and TV.
Even with HD Projects, one is best to size the still images as closely, as is possible, to the Frame Sizes in that Project's Preset, say to only a bit more than 1920 x 1080, if that is the Preset chosen for the HD (BD) Project. Here's a LINK to the accepted HD formats.
This ARTICLE will give tips on resizing of stills before Import. Now, the sizes listed are SD, but it's easy to "do the math" to get to a BD Project Preset size.
Good luck, and hope that this helps,
Hunt -
I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top
You can see which apps are open and/or recently used by double-clicking the home button to bring up the taskbar at the bottom of the screen (not all apps that appear there are active) - you can then close apps on it by pressing and holding one of them for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. If you have an app 'open' on-screen then it won't appear on the taskbar, you will need to go back to the homescreen first, and it should then show when you next open the taskbar.
If you haven't already got a copy then you can download the iPad manual from here : http://support.apple.com/manuals/#ipad -
How do I limit what movies are displayed at the top on the main screen
Is there any way to limit what movies are displayed at the top on the main screen when menu Computers are selected?
Currently it shows ALL of the content in the Movies folder in iTunes, but I would like to not show my 1 million 5-second videoclips and only the "real" movies.
Any suggestions?
Thanks in advance
Bjoern DirchsenI think you are right. It's the latest videos added that are displayed first. Makes sense.
I'm using a PC so it's a bit hard to work with iPhoto . However, your comment did give me a hint to how to solve the problem.
I moved all my video-clips out of my Movies folder and into my Pictures folder.
Then I changed Photo Sharing in Itunes to include Videos
And voila! The main screen now shows only my "real" movies. Sorted by latest added - but I guess that's the best we can do.
Thanks for a super-fast answer. -
How do I spot what images are RGB using the separations preview?
2 Questions: 1. How do I spot what images are RGB using the separations preview? 2. Is there an easy way to convert those to CMYK without opening each one in PS? I did this before all the time but I'm rusty and can't remember how I did it. I'm on CS6.
You can one of several methods to find out:
(1) You can use the Links panel. Open the Links panel. Go the panel menu and choose Panel Options. In the Panel Options dialog, Under Show Column check "Color Space". Now when you view your Links panel it will show the color space of all linked images.
(2) You could use Preflight, and set up a Preflight Profile. In the profile, go to the Color section > Color Spaces and Modes Not Allowed, and check RGB. Then any RGB images would be flagged.
(3) If you need to know BEFORE you place the images, use Adobe Bridge. Open the folder where the image are. Use the Metadata panel and view the color space of the images. -
Time machine only copies User Info and Users (Applications, Library, and System are missing) from my quad core Mac Pro. 45 Gb of 162 Gb are missing. Any one having success with time machine copying all folders using Mavericks?
What do I need to do differently?The late, great Pondini was investigating that issue before he passed away.
See here: https://discussions.apple.com/thread/5125969
I think there might be information there on how to reset Time Machine to do a full backup. I think you basically have to reset it and start over. -
What temperatures are acceptable for the CPU and Graphics card?
I have Intel Xeon X5400 series CPUs and a Nvidia graphics card.
It is interesting to monitor the temperatures but only if you know what temps matter...
What temperatures are acceptable for the CPU and Graphics card?
I was not sure if this is the document of choice for the CPU or not. I was not sure I was decifering it correctly either.
http://download.intel.com/design/xeon/datashts/318589.pdf
Any one know what we should be watching for as far as what is too hot?
I have a ThinkStation D10.
Did not see this in the user manual but could have missed it.I found my specs:
Intel(R) Xeon(R) CPU E5405 @ 2.00GHz
You are correct. An E series.
I was so focused on the upgrade to the X5420 that I forgot what the system came with.
So what should I set my sensor high value to on my sensor program that shows up on the panel (taskbar)?
For the E5405 or the X5420?
SIDE NOTE: where can I get 2 E5420s or better cheap?
Not ready to give up my filters just yet. I live in a dust factory!
My girl friend sews really nice bags but creates sewing dust and fuzz.
And well there are natural fibers everywhere...
So other than the the X5492 (150watts), the X5482, X5472, X5470, X5460, X5450 are all 120 watts.
Like the bulk of the X series...
The E5405, E5410, E5450, E5440, E5420, E5430, E5470, E5462, E5472 are all 80 watts.
The L series seems to all be 50 Watts.
For many the other Processors see this:
http://www.intel.com/products/processor/xeon5000/specifications.htm?iid=products_xeon5000+tab_specs
Message Edited by VitalBodies on 12-06-2008 08:46 PM
Message Edited by VitalBodies on 12-06-2008 09:03 PM -
How do I find out what applications are running in the background
I have a 2008 iMac with 2GB memory. How do I find out what programs are running in the background? I am going to buy a new iMac before the end of the year to replace this one. When I looked at Activity Monitor it shows 1.8Gb used but doesn't tell all the programs running.
open activity monitor [if it doesnt launch click winders>Activity Monitor]. then it'll show all proceses
-
How do i see what applications are running in the background
My iMac is running very slow my operating system is OS X Yosemite Version 10.10.2 with a 2.5 GHz Intel Core i5 Processor. How do I see what applications are running in the background?
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Wanted to know what actions are taken on the database
Dear Sir
I wanted to find out what actions are performed explicitly on the database.For example I apply a patch on the database of create object,drop object,insert object,update object ...etc.Does Oracle Maintain any logs for such object.?....
.I wanted to find out what actions are performed on the database on daily basis?....Can we maintain the log of it?
Appreciate your help on the above?
Regards[email protected] wrote:
Dear Sir
But I wanted to know If anybody firing any DML,DDL OPERATION IN THE DATABASE.CAN ORACLE MAINTAINS ANY AUDIT OF THAT?
RegardsPeople dont perform commands on the database level but they do it on the tables. So you would be setting the auditing on the objects actually. Not to nick pick but the terminology should be correctly used as it may come as an confusion later on. Depending on what you need, that type of auditing can be set on the table.
Also make a habit to post your db version and o/s for sure in all the posts.
HTH
Aman.... -
When using 'sponge' effect on a fill, how do I get rid of the white 'pixellations' (if that is what they are called around the edges of the fill?
I tried to give you this solution before, but maybe you missed it. This simple procedure will mask out all the various sponge edge-artifacts. Here it is in simple steps:
1. Make the path shape you want to apply the sponge effect to.
2. Highlight that path, and select Object > Path > Offset path ... choose +2 points (or whatever works for your drawing scale, to ultimately eliminate the outside line and the artifacts) -- this will make a slightly larger shape, based on the original shape.
3. Cut the outside path (command or alt-X), select the inside path, and paste the outer path BEHIND the inner path (command or alt-B).
4. Apply the sponge effect to the OUTER path.
5. Highlight BOTH paths, and create a MASK (command or alt-7).
Now you have your original shape, with sponge applied, and the outer 2 points (or whatever your Offset Path was set to), are masked out, masking out the outside line and the sponge artifacts.
This works with any Document Raster Effect Settings dpi. -
What permissions are needed on the client side for RunspaceFactory.CreateRunspace?
Hi.
I am running a remote powershell command from an IIS application to an Exchange server getting the below error. Everything works fine if the IIS application pool identity is in the local administrators group on the IIS server so we can rule out issues with
firewall or anything on the Exchange server. It is a problem with lack of privileges on the local server.
So my question is: What permissions are required on the local server for RunspaceFactory.CreateRunspace? I find good documentation on the permissions required on the server side, but nothing about the client side.
The last Win32 error code after failure is 1008.
An internal error occurred.
at at System.Management.Automation.Remoting.Client.WSManClientSessionTransportManager.Initialize(Uri connectionUri, WSManConnectionInfo connectionInfo)
at System.Management.Automation.Remoting.Client.WSManClientSessionTransportManager..ctor(Guid runspacePoolInstanceId, WSManConnectionInfo connectionInfo, PSRemotingCryptoHelper cryptoHelper)
at System.Management.Automation.Remoting.ClientRemoteSessionDSHandlerImpl..ctor(ClientRemoteSession session, PSRemotingCryptoHelper cryptoHelper, RunspaceConnectionInfo connectionInfo, URIDirectionReported uriRedirectionHandler)
at System.Management.Automation.Remoting.ClientRemoteSessionImpl..ctor(RemoteRunspacePoolInternal rsPool, URIDirectionReported uriRedirectionHandler)
at System.Management.Automation.Internal.ClientRunspacePoolDataStructureHandler..ctor(RemoteRunspacePoolInternal clientRunspacePool, TypeTable typeTable)
at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal..ctor(Int32 minRunspaces, Int32 maxRunspaces, TypeTable typeTable, PSHost host, PSPrimitiveDictionary applicationArguments, RunspaceConnectionInfo connectionInfo)
at System.Management.Automation.Runspaces.RunspacePool..ctor(Int32 minRunspaces, Int32 maxRunspaces, TypeTable typeTable, PSHost host, PSPrimitiveDictionary applicationArguments, RunspaceConnectionInfo connectionInfo)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspacePool(Int32 minRunspaces, Int32 maxRunspaces, RunspaceConnectionInfo connectionInfo, PSHost host, TypeTable typeTable, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.RemoteRunspace..ctor(TypeTable typeTable, RunspaceConnectionInfo connectionInfo, PSHost host, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(RunspaceConnectionInfo connectionInfo, PSHost host, TypeTable typeTable, PSPrimitiveDictionary applicationArguments)
at System.Management.Automation.Runspaces.RunspaceFactory.CreateRunspace(RunspaceConnectionInfo connectionInfo)Thanks Daniel.
I see that the IIS server has a GPO setting 'Allow log on locally' to the local administrators group for this server. I will order add of the IIS app pool identity to this list.
I tried the process monitor comparing runs with and without the app pool identity as local administrator. The runs are identical up to the point where one does something useful and the other closes 'HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\WSMAN'.
There are no failures.
I am not using my runspace objects for multiple threads. I dispose after use.
I will end up with the below if I change. Comments?
public static PowershellResult RunPowerShellCommandExchange2010(string exchangeServer, string command, ICollection<KeyValuePair<string, object>> parameters, string usr, string pwd) {
WindowsImpersonationContext impersonationContext = null;
try {
impersonationContext = WindowsIdentity.Impersonate(IntPtr.Zero);
GetProcessInformation();
try {
var connectionInfo = GetExchange2010ConnectionInfo(exchangeServer, usr, pwd);
using (var runspace = RunspaceFactory.CreateRunspacePool(1, 1, connectionInfo)) {
using (PowerShell powershell = PowerShell.Create()) {
var psCommand = new PSCommand();
if (parameters != null) {
psCommand.AddCommand(command);
foreach (KeyValuePair<string, object> parameter in parameters) {
if (parameter.Value == null) psCommand.AddParameter(parameter.Key);
else psCommand.AddParameter(parameter.Key, parameter.Value);
} else {
//if parameters argument is null the command will be treated as script
psCommand.AddCommand(new Command(command, true));
powershell.Commands = psCommand;
runspace.Open();
powershell.RunspacePool = runspace;
var resultPSObjects = powershell.Invoke();
var psResult = new PowershellResult {
PSObjects = resultPSObjects,
Errors = powershell.Streams.Error.ToList()
return psResult;
} catch (Exception ex) {
var windowsIdentity = WindowsIdentity.GetCurrent();
int errorCode = Marshal.GetLastWin32Error();
if (windowsIdentity != null) throw new Exception(string.Format("Failed to run Exchange powershell command '{0}' as user {1} passing executing user {2} due to: {3} at {4}. Server: {5}. Last error code: {6}", command, windowsIdentity.Name, usr, ex.Message, ex.StackTrace, exchangeServer, errorCode), ex);
throw new Exception(string.Format("Failed to run Exchange powershell command '{0}' as unknown user passing executing user {1} due to: {2} at {3}. Server: {4}. Last error code: {5}", command, usr, ex.Message, ex.StackTrace, exchangeServer, errorCode), ex);
} finally {
if (impersonationContext != null) {
impersonationContext.Undo();
Tore Olav Kristiansen -
What else are stored in the database buffer cache?
What else are stored in the database buffer cache except the data blocks read from datafiles?
That is a good idea.
SQL> desc v$BH;
Name Null? Type
FILE# NUMBER
BLOCK# NUMBER
CLASS# NUMBER
STATUS VARCHAR2(10)
XNC NUMBER
FORCED_READS NUMBER
FORCED_WRITES NUMBER
LOCK_ELEMENT_ADDR RAW(4)
LOCK_ELEMENT_NAME NUMBER
LOCK_ELEMENT_CLASS NUMBER
DIRTY VARCHAR2(1)
TEMP VARCHAR2(1)
PING VARCHAR2(1)
STALE VARCHAR2(1)
DIRECT VARCHAR2(1)
NEW CHAR(1)
OBJD NUMBER
TS# NUMBERTEMP VARCHAR2(1) Y - temporary block
PING VARCHAR2(1) Y - block pinged
STALE VARCHAR2(1) Y - block is stale
DIRECT VARCHAR2(1) Y - direct block
My question is what are temporary block and direct block?
Is it true that some blocks in temp tablespace are stored in the data buffer?
Maybe you are looking for
-
Hi, I have designed the GUI, which contains JTable. Every time the table is loaded with some values dynamically, after doing some operation. The table values are first stored in the vector and set to DefaultTableModel. The DefaultTableModel contains
-
Does anyone know how OSX can create a file with the ending ".saved"? Background: Somehow my inlaws deleted their Mail.app preference file (mail created a new one and became defaulted, losing their mail accounts) but the old one was still in the Libra
-
Plz help Error in encoding Soap Message
hii, im new to web services ,im doing a test application using netbeans 5.5 which retrieves some information from database.Its working fine if i return eother a string or a list of strings from webservice method. But if im using a user defined dataty
-
How the Connector works inside ?
Hello, now I got a sample with a BAPIRET2 table and it is working, but I have a general question to integer types. I saw that the field "ROW" is an ..._INT (INT4) and has a 4 byte length exactly how the byte store in memory. The ABAP dictionary says
-
Hi I am using Weblogic server 8.1 for EJB applications. I deployed simple session ejb program,i successfully deployed ,but client program not compiling it doesn't take home and remote interface. How to set classpath for client program,before compilin