What resolution is needed for 2m x 2m sign?
I'm designing something that's intended for a sign of 2metres x 2metres.
What sort of resolution do you think I'd need to start it at?
Also, if I've already done a design - one of far lower resolution - is there any way to convert it to a higher one, or will it just distort? I'm assuming it will, but this isn't really my area of expertise!
Thanks,
James
It really depends on how you want the printed sign to look. For a sign that big, my guess is that it will be viewed from afar, rather than up close. In that case, you could easily get away with 150 dpi—perhaps even lower, depending on the look of the sign. Hope that helps.
Similar Messages
-
To what resolution I need convert movie for Iphone?
Hi
To what resolution I need convert movie for Iphone? I have many option and don't know what resolution I need to choose? What is h264? I use joboshare.com software. Thanks.Edulinka wrote:
Cant figure it out how it is working.
How do you mean? I wonder if the XP version is the same as the Mac version. I think as a default Handbrake will respect the aspect ratio. It's only the quality you need to decide on. -
What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit
What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit
Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt -
What is the need for setting property data inside the JMSMesage
Hi
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball");
and also please tell me how can the MDB recievies this property data ??
Thanks in advance .raviprivate wrote:
Could anybody please let me know
*What is the need for setting property data inside the JMSMesage??
For example i have a seen a similar example as shown ??
I have seen a
Message.setStringProperty("Sport","Basketball"); Look at the detail JMS documentation on [Message Properties|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/jms/Message.html] .
>
and also please tell me how can the MDB recievies this property data ?? MDB onMessage method argument is the Message object and if you look at the documentation, Message interface has getter methods to retrieve the properties. -
What is the need for calling default constructor by JVM?
What is the need for calling default constructor by JVM? why the JVM should intiializes default values to the data
fields if the constructor is not there in our class?mahar wrote:
What is the need for calling default constructor by JVM? Huh? The JVM does not need to call the default constructor. It needs to call a constructor.
You decide which one by the way you use "new".
why the JVM should initialize default values to the data fieldsHuh?
... if the constructor is not there in our class?Huh? The default constructor is always there. It may be private but it is still there. -
Just bought a new iPod Touch 16G - (I think it's a 5th gen.). I used my old iPod to record music rehearsals. This new iPod is stating that my old Belken mic (with new adaptor) is not compatible. Does this new iPod Touch have ability to record audio? If so, what do I need for a mic??
Thanks very much! I found the app, tested it, and it sounds fairly lifelike. Big help!!
-
I have already bought a macbook pro in USA and I want to use it in Europe. What adapter I need for my Airport Extreme?
No power adaptor is needed as the power units are auto-switching. But you will need wall outlet adaptors such as you will find in Apple's World Travel Kit, at AAA stores, and other vendors.
-
HT1222 Since I'm an American, what's the need for me to update?
Since I'm an American, what's the need for me to update?
How does the new update apply to me?What update are you referring to? If you mean iOS 6.1.3, there are a number of security updates that apply to all iOS devices:
http://support.apple.com/kb/HT5704
If that's not what you mean, please explain further.
Regards. -
Can someone tell me what settings I need for ipad texting. I went to Mexico and when I returned the texting does not work on my ipad. The support at Apple wanted to charge me to get info.
THanksCan't address the problem directly, cause even though my iPad4 is Cell+Wi-Fi, I've never put a SIM in it and never had the need to text, SMS or iMessage, from it. When away from the office or home wireless network, I tether it off the iPhone. Skype, both text and video, work just fine thru the Wi-Fi link, though.
HOWEVER, when I was hashing out the contract details to get the iPhone 5 about 14 months ago at Telcel, the representative distinctly mentioned that both Visual Voicemail as well as iMessages would be included in the package and they would be mandatory cause "I was getting a (subsidized) Apple iPhone" on a 24 month leash. Then when the gizmo came out of its box for SIM installation and activation, she went thru the motions of making sure both were working properly. So I assume the carrier has some say in the matter. -
What Equipment is Needed for CCNP Security Lab
Hello,
Im Looking to find out what Devices are needed for a ccnp security home lab. I keep hearing that 2 5510's are a must for labbing. The downside Is the Prices avg $800 each on the low end. I also saw some ppl had an ips in their lab. Im looking to find out what is 100% needed. I alredy have a lab in place used for my ccnp r&s.
ThanksI would also say that two ASAs is a must to practice with them. But in my opinion, 2 5505 SecPlus are enough. What are the differences to the 5510? You configure subinterfaces instead of vlan-interfaces. But that's something you know from R/S. And the failover is only stateless, but failover in general also works. Sof if you find these ASAs for less money, take them. IPS is probably the topic where most CCNP Security students are least familar with. So owning a sensor would also help.
And don't forget that the bigger CCIE-Training vendors have complete labs for rent with all you need for CCNP Sec preparation. That could also save some money.
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni -
What all is needed for this type of Flash Design Studio
What all is needed for this type of Flash Design Studio.
There are a couple of sites out there that use both flash and
shockwave. I am looking ot get somethign like this started and need
some help getting pointed in the right direction. here are some
examples:
http://www.uberprints.com/studio/
http://www.customavenue.com/online-design-studio/online-design-studio.html
https://www.youdesignit.com/youdesignit.cfm
http://www.pixeltees.com/makeRclarkhaddock,
> What all is needed for this type of Flash Design Studio.
There
> are a couple of sites out there that use both flash and
shockwave.
Of the examples you showed, I saw Flash (Adobe Flash),
Shockwave (Adobe
Director), and JavaScript, but never a combination on the
same site. (It
might make sense to combine Flash with JavaScript or
Shockwave with
JavaScript, but not really to combine Flash with Shockwave.)
> I am looking ot get somethign like this started and need
some help
> getting pointed in the right direction.
Any of the above technologies will do it. You could also use
a Java
applet or even a .NET solution of some kind, so the choice
you take will
depend largely on what platform you want to support and code
for. This sort
of project will require significant amounts of custom
programming. My
personal approach would be to use Flash, mainly because of
the popularity of
the plugin. The Shockwave example looks beautiful, and I
started out years
ago using Director, but fewer people nowadays have the
Shockwave plugin
installed. It doesn't look like any of the sites shown use 3D
modeling,
which is the only relevant feature that Shockwave has over
the other
approaches. JavaScript (probably some Ajax approach) would
work -- as
seen -- but then you're dealing with compatibility issues
among various
JavaScript implementations in the great variety of browsers
out there.
Flash minimizes that, in my opinion.
All you really "need" to produce what you've seen is Flash
and some sort
of database back end (MySQL, say), which means you'll need a
bit of
middleware (PHP, ASP, Cold Fusion, etc.) to act as your
ambassador between
Flash and the database.
David Stiller
Adobe Community Expert
Dev blog,
http://www.quip.net/blog/
"Luck is the residue of good design." -
what permission is needed for a login to access the restored database(backup from different server)
frequently reach the situation, when vendor restores a database, but he cannot access it unless I remap or add his login to the restored database. What permssion can grant the vendor so that he can but only can access the database he restored, not all other
databases.Hi George,
According to your description, When you move a database from one server that is running SQL Server to another server that is running SQL Server, a mismatch may occur between the security identification numbers (SIDs) of the logins in the master database
and the users in the user database. As other post, you can use the sp_change_users_login stored procedure to map SQL Server logins. Also , you can use the following statement after doing the restore database. It will
fix the mis-mapped SID inside the restored DB.
ALTER USER <username> WITH LOGIN = <username>
For more information, you can review the following article.
http://blogs.lessthandot.com/index.php/DataMgmt/DBAdmin/MSSQLServerAdmin/do-you-still-use-sp_change_users_login/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
What software is needed for system recovery? (cont'd)
What software is needed for system recovery of a Toshiba Satellite Pale8u-02p01D (also known as L355D-S7901) running Vista?
If I can just get the name/number for the recover software I will get it from eBay.
Thanks!
Solved!
Go to Solution.Satellite L355D-S7901
If you want to look for that on eBay, look for the recovery discs for the model above. I doubt you'll find them there.
You can order them from Toshiba, of course.
Order Toshiba Recovery Media
And you might get them cheaper from a third-party vendor.
Digitalmedia-labs.com
MyRecoveryCDs.com
Recovery-CD.com
RestoreDisks.com
RestoreCD4u
-Jerry -
What do I need for this?
I would to write some code where a web surfer would
enter in some data (criteria) that would be sent to a
web server where the criteria would be used to cut
a small section of a large image file and send that
smaller image back to the end users browser.
What do I need to start development (simple & quick)?
Are there java components that need loaded on the
server for this to happen?
Will applets do what I want?
Thanks!Certainly you will want some sort of processing to take place on the server. Otherwise, all the server could do is stupidly send the entire image file. It sounds like servlets or CGI we what you want to use.
-
What do I need for my MacBook Pro to work in the UK
I am traveling to the UK. Do I need anything special to plug it in for power being they use 220V there? And if so, what will I need.
Just get the appropriate plug. Either a converter from Radio Shack to go from the standard US flat-blade NEMA plug to the funny UK plugs, or the fancy Apple Universal Travel Kit from the Apple Store. The latter has all that you need to plug anywhere in Europe, should the yen arise to take the Chunnel Train and see the Continent.
Maybe you are looking for
-
How to eliminate advapi32.dll error in Labview RT
Hi all, I am having a problem deploying a RT application to the remote machine. I get an error stating Error loading 'WS2Help '.dll: Missing export 'AllocateAndInitializeSid' from ADVAPI32.DLL' After searching the internet for a while I know that th
-
Union All with Linked Servers - Works until loaded on to the report server then fails.
Hi, On our production server I have 2 linked servers. One that leads to ServiceNow via ODBC and one that leads to an HP Openview database. Testing these linked servers works fine. I have a query that obtains info from each source and 'union all' to
-
so i have one of the imacs which were before the new updated aluminum imacs, you can see by my model below, anyway i need to know what dpi my screen is?? can anyone tell me or explain how to find out? if this helps my resolution is 1920 x 1200. but y
-
TS1702 I purchased the app Word Lens but cannot get it out of demo mode.
I purchased the app Word Lens but cannot get it out of demo mode.
-
Master Collection has gone haywire; think's it's in the Cloud
I've had CS6 Master Suite for years. All of a sudden, some apps don't open. Illustrator and Audition ask if I want to continue the Creative Cloud Trial period, even though I have never tried the Cloud version and I certainly don't want to. Audition