What Resolution to use from Istock for Youtube?

I'm trying to make my first movie which will be uploaded to Youtube. I will shoot my video in 1080. I am assuming (not always smart) that I should use the standard 4:30 aspect ratio. I want to use include some stock video footage...probably from istock. I have four options with increasing file sizes and costs. Small Web 320X180; big Web 640X360, HD720 1280X720 or HD1080 1920X1080. For use on YouTube does it make a difference? I have no clue what I should use, but obviously I would not buy the largest and most expensive. The video will basically be B-roll and I will do a voice over. Thanks for any assistance.

This is the iOS forum, so for iPads and iPhones.
iPad2 & iPhone4s can edit in 1080,
iPhone 4 and iPod Touch can only edit in 720.
There is no 4:30 ration that I have heard of.
All HD formats are 16:9 ratio; thought there is a some odd or letter boxed cinema sizes.
There is no 4:3 HD format.
4:3 was a standard for early SD television, but is not an HD standard or even a format sorry.
You tube can accept various frame sizes.
You should start by thinking what size you want to deliver, and edit up to that frame size.
Stock footage should be up to that size too.
I'm wondering why you want to put B-roll on you tube? And why is there stock footage in your B-roll?
If you want answers specifically for iMovie for Mac you should as Apple to move this question to the mac forum.

Similar Messages

What resolution to use

I wrote an application for outdoors gas measurements and I can't decide what resolution to use. I originally wrote it in 1400x1050 and I assumed that by checking the "Maintain proportions of window for different monitor resolutions" box it would go to full screen with no problems in case you are using a lower resolution monitor. But as I read in the forums and found out myself there are certain problems with that and when I try it out my front panel is a mess with controls overlapping each other (I guess there is no such thing as half a pixel).
Is it a valid solution to go for the lowest resolution possible? In my case that would be 1024x768 since I have a good number of controls and 800x600 is too small. Is the 1240x1024 more popular? Also should I check the "Maintain proportions of window for different monitor resolutions" box in order to resize for better resolutions or should I play it safe and just have the front panel appear at the top left corner?
Thank you.

The front panel scaling functions does not always work 100%. I had the some problem with an application once. The customer was not very happy with the scaling functions. So I wrote 4 separate applications for the screen resolutions the customer planed to use, and included all on an install cd. For me this was the simplest and quickest solution. Only minor changes on the front panel was needed in each case, and the customer was also very happy. Remember also to take the Labview font scaling problem into consideration. You can read more about it here
http://forums.ni.com/ni/board/message?board.id=170&thread.id=384019&view=by_date_ascending&page=1
Message Edited by t06afre on 04-01-2009 04:23 PM
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

What is the best scrubbing rate for youtube?

what is the best scrubbing rate for youtube?

Ummm... can you elaborate? why do you think a 1-pass would be better? Before i go through another 5 - 6 hours of compression, I would like to understand a little bit better... 2 0r 3 word answers aren't going to help me at all. Sorry.
Lisa <
You have about three thousand pages of manuals, why do you think we can shrink that information down? Compression is really difficult to understand and to control. There are dozens of Web sites you can explore or you could look at amazon.com and buy yourself some training systems. If you are going to be doing a lot of compression and encoding, you will learn it the same way everyone else does, slowly. It's often easier and faster and therefore cheaper to pay a service to do your encoding. Spend a few hours reading the Compressor forum.
Consider that you don't need to waste mjuch time rendering entire projects. Just assemble a short collection of problem scenes and use different settings till you get something you like. To confuse things even further, encoding results are totally subjective and a terrible compromise. You give up image quality to save time encoding or to gain program length. Youinvest tons of set up and encoding time to gain control the image quality. And you must process the audio separately to get the best use of your delivery media's capacity.
bogiesan

To what resolution I need convert movie for Iphone?

Hi
To what resolution I need convert movie for Iphone? I have many option and don't know what resolution I need to choose? What is h264? I use joboshare.com software. Thanks.

Edulinka wrote:
Cant figure it out how it is working.
How do you mean? I wonder if the XP version is the same as the Mac version. I think as a default Handbrake will respect the aspect ratio. It's only the quality you need to decide on.

Hi, what can i use location service for find my lost macbookAir

hi, what can i use location service for find my lost macbookAir

If you're an iCloud user and had "Find my Mac" enabled in the System Preferences, then you can go to www.icloud.com, sign in and click Find my iPhone.

What should I use to scan for Trojans or Keyloggers?

I've heard conflicting conversations about not using anti-virus or that OS X has built in protection, but I wanted to know what the best way to check for Trojans or Keyloggers is so I can give my computer a looking-over before backing it up.
I'm using OS X 10.6.8

Conversations? There have been a few of those.
I'm not aware of a tool that's particularly reliable about detecting malware, nor one that might (for instance) catch hardware keyloggers.
The usual questions around your situation apply; I don't know how you use the system, nor what exposures or risks you might have or might face. For instance, how sensitive is your information, who has had access, and what are the circumstances associated with the access, and what's been loaded onto the system?
If you're incautious or blasé about your computing practices and fond of downloading from torrents or acquiring cracked software or downloads from sketchy sites, then the anti-malwaretools generally won't save you.
In general: just back it up, back it up regularly, and keep various copies of the backups offline or remote, or both. Backups and caution are among the best available anti-malware tools.
If you're fond of installing random stuff and particularly of entering your administrative password when prompted — that password is the proverbial keys to the security kingdom, to your address book, etc — or if your login passwords have been compromised (or have kids around that install all sorts of Free Stuff! and Free Games!), then change all your passwords, and install Little Snitch or equivalent, or implement and use network perimeter monitoring. These monitoring tools catch (unexpected) outbound network connections, such as that Facebook watering hole attack.
Better still: upgrade to 10.7 or 10.8 as your hardware permits, as 10.6 is rather old and lacking some of the newer capabilities here, such as Gatekeeper. Disable the Java web start plug-in to disable Java (and don't install Java after you upgrade to 10.7 or 10.8), and remove Adobe Flash Player, and disable the "open safe attachments" setting. And if you're (necessarily, or otherwise) paranoid, install Little Snitch or network perimeter monitoring.
If you feel obligated to use a malware scanner (the hit rates on the malware-scanning tools are far from great, and the implementations of most aren't that much different from the malware itself in terms of how the scanning software can insinuate itself into the system and can sometimes then trigger issues with stability and operations), then ClamAV is the usual recommendation around the forums. OS X Server includes that, and there are various discussions around getting ClamAV going on OS X client.
Once your operating system software has been compromised, the usual path is a wipe and reinstall, or a wipe and install of a backup prior to the breach, followed by steps to prevent a reoccurance. Decontamination of a system is difficult, at best. If your hardware has been compromised, you're in deep sneakers.
If you want to be or need to be paranoid due to the information involved or folks that have had unfettered access to your system hardware, then check for dongles or other unexpected external devices, and start replacing your equipment. The "better grade" keyloggers can be stored in USB devices, and can be mounted within your hardware. The better-grade gear can be difficult to locate, short of disassembly. Also check your local network, as it's feasible to monitor traffic there, whether within a modem, or within a device added to your network.
Again, how paranoid you wanr or need be here depends highly on what you've been up to, and who might be after you, and a whole host of other details...

What resolution should I save images for fixed-layout epub?

I have produced an illustrated history book that was created with 300dpi images for print publication. My next step is to create a fixed-layout epub. Is there a particular resolution that I should set for the images? Is there a single resolution that I can use to target all tablets and e-readers that accept fixed-layout epubs?
My strategy was going to be to generate a PDF of the book (with no text) and import the PDF pages as the background images for the fixed-layout epub. I am guessing that I should use 150 dpi when saving the PDF.
I'm just a little worried that if I create the fixed-layout epub with 150 dpi images, it may not show up correctly on tablets that don't have high resolution screens?
Thanks,
Paul

Use the "Save for Web" option. Put in the resolution you want, and then dial down the quality, it will show you what it looks like. Go as low as you're willing given the quality it shows.

How to find all the parts used from stock for 1 machine

Dear Sap community,
I'm trying to find all the spare components that are used for 1 specific machine.
If I look in the work orders under components it only gives the components that are orderd.
But I would like to find the components that come out of stock. I asked the stockkeeper and he said he writes it all in the work orders but we can't find it back.
It would be nice to just find it on the work order but it would be easier if I could just choose a machine and then find all the spare parts used from stock.
So my question is can I find all the spare parts used for 1 machine or just find the spare parts in the work order?
Thank you for any help you can provide in this situation,
Michael Claes

Hi,
In addition to puneet's information:
Training and Event Mgmt infotypes:
    Prices (Infotype 1021)
    Availability Indicators (Infotype 1023)
    Capacity (Infotype 1024)
    Depreciation Meter/Validity (Infotype 1025)
    Business Event Info (Infotype 1026)
    Site-Dependent Additional Info (Infotype 1027)
    Address (Infotype 1028)
    Business Event Type Info (Infotype 1029)
    Procedure (Infotype 1030)
    Mail Address (Infotype 1032)
    Name Format (Infotype 1034)
    Schedule (Infotype 1035)
    Costs (Infotype 1036)
    Billing/Allocation Info (Infotype 1037)
    Business Event Blocks (Infotype 1041)
    Schedule Model (Infotype 1042)
    Demand (Infotype 1060)
    Web Link (Infotype 1061)
    Knowledge Link (Infotype 1062)
    Business Event Group Info (Infotype 1063)
Thanks,
Anil.G

What is the use of services for object icon (attachment) in customer master

Hello,
What is the use of the icon in customer master i.e. service for object(attchment)
Any idea In which table those attachemnts stores,
In SAP i can see only temp. structure table SGOS_ATTA when i look for table information, so i dont know where to look for these files although i tried great selection of tables which either were empty
Thnks,
Ahamad S

Please search the forum or Google with the same text so that you will find many times this has been discussed. Please go through the forum rules which you can see to your right screen and adhere to that. Being an old member, no need to stress this.
G. Lakshmipathi

What standards are used by Microsoft for developing Windows Server and other products

Where can I obtain or solicit information regarding Microsoft software development process compliance with national/international standards? I need to create regulatory documentation, and knowing which ISO, IEC, ANSI, etc. standards that Microsoft uses to
develop specific applications (including but not limited to Windows Server 2012 Standard) would be most useful.
My efforts to obtain this information (live chat, calls to different support numbers and tweeting) have been fruitless.
Any help would be much appreciated.

As to the 'broken' link. The editor in the forums has a nasty habit. If one concludes a sentence with an URL and puts a period after the URL to designate the end of the sentence, the forum editor includes the period as part of the URL.
Delete the period and the link will work.
What do you mean by 'standards' for software development? If you mean something like ISO/IEC 12207, I think you are going to have to search Microsoft web sites and then see if you can strike up a conversation with authors of articles you find.
I am not aware of any specific publication of conformance to such standards within Microsoft. Even though I worked for them for 12 years in a non-engineering role, I tended to take an interest in this sort of thing based on interests developed in previous
roles.
Here is a link (http://www.microsoft.com/security/sdl/resources/publications.aspx) and here (http://www.microsoft.com/security/sdl/default.aspx) that
covers their Secure Development Lifecycle. To a great extent, Microsoft 'wrote the book' on how to do secure development (http://www.barnesandnoble.com/w/the-security-development-lifecycle-michael-howard/1110830298?ean=9780735622142).
It may appear dated, as it was published about eight years ago, but it became the textbook for some college courses on secure development.
. : | : . : | : . tim

What driver to use with Plays for Sure Zen touch

Hi, I've upgraded my zen touch to 2.0.05 in the past.
Now I'm using a new computer and I need to install drivers for the Zen Touch.
The drivers on the CD do not recognise my Zen Touch, the latest drivers only support zen touch with firmware below 2.00.00, and to my knowledge, Microsoft has discontinued the use of Plays for Sure devices.
Further more the bundle update for Plays for Sure device only works if it can detect the Zen Touch in the first place, which it cannot.
So does anyone have a working driver for Zen Touch firmware 2.00.00 and above, thanks.

actually I do have the mtp drivers installed, but the interface is not as good as the Nomad Explorer. But when I try to install the real drivers for Explorer, it tells me that the Zen is undetectable, even though it clearly is plugged in and seen by the computer.

[N95] What resolution to use for contact-tumbnails...

Can some1 tell me how big the pic should be for my contact-tumbnails?
(resolution)
Thanks...
"Wham, Bamm, thank you Man!!"

you can put in any resolution and it will resize it

Out of interest... What do you use Cisco VPN for?

Is it more secure than Activesync for example?
Thanks in advance.
(ps. We run VPN's. Just not sure what the value is for an iPhone)

Our employees use VPN to access internal company web sites and our financial system from their iPhone. We also have network adminstrators performing support functions via remote desktop, VNC and via other connections.
ActiveSync, when used with the SSL function enabled, is secure enough for us and we allow access outward facing to the Internet without the need for VPN (we also allow access while connected via VPN).

What can I use Aurora JVM for?

Hi, Oracle 8i Java Development Team!
I have made more accurate tests. I done Java stored procedure and
deployed it on Oracle 8.1.5 Server Enterprise Edition . Here are
Java program and SQL call spec.
Java store procedure I run in two ways: from SQL*PLUS and from
session shell with the same bad results. Then I run this program
on Sun JVM ( JDK 1.1.7 ) and received interesting results ( see
below )
public class TestBench
public static long RunBecnch( long count )
double dig = 76765.78978;
double res;
long start = System.currentTimeMillis();
for ( int j = 0; j < count; j++ )
res = dig / j;
long end = System.currentTimeMillis();
System.out.println( "Time is : " + ( end - start ));
return ( end - start );
public static void main( String[] args )
long cnt = Integer.parseInt( args[ 0 ] );
long res = RunBecnch( cnt );
create or replace function test_bench( cnt number ) return number
as
language java
name 'TestBench.RunBecnch( long ) return long';
declare
res number;
cnt number;
begin
cnt := 10000000;
res := test_bench( cnt );
dbms_output.put_line( 'Result is '

Hello,
Digging a bit in the Oracle 8i docs, I've found why the java
performance is so low in the database VM. Because there is no
support for user native code from Java yet, and it will be
implmented in a subsequent release. So every program you write
is interpreted only.
So the only advantage you can get from Oracle 8i for the
moment is using their nativized libraries (which are DLL's for
the JDK API)
Alexander
Vladimir Borkovkin (guest) wrote:
: Hi, Oracle 8i Java Development Team!
: I have made more accurate tests. I done Java stored procedure
and
: deployed it on Oracle 8.1.5 Server Enterprise Edition . Here
are
: Java program and SQL call spec.
: Java store procedure I run in two ways: from SQL*PLUS and from
: session shell with the same bad results. Then I run this
program
: on Sun JVM ( JDK 1.1.7 ) and received interesting results (
see
: below )
: public class TestBench
: public static long RunBecnch( long count )
: double dig = 76765.78978;
: double res;
: long start = System.currentTimeMillis();
: for ( int j = 0; j < count; j++ )
: res = dig / j;
: long end = System.currentTimeMillis();
: System.out.println( "Time is : " + ( end - start ));
: return ( end - start );
: public static void main( String[] args )
: long cnt = Integer.parseInt( args[ 0 ] );
: long res = RunBecnch( cnt );
: create or replace function test_bench( cnt number ) return
number
: as
: language java
: name 'TestBench.RunBecnch( long ) return long';
: declare
: res number;
: cnt number;
: begin
: cnt := 10000000;
: res := test_bench( cnt );
: dbms_output.put_line( 'Result is '

What can i use Data/Services for?

I have a datagrid displaying data from my database and i can get access to whichever data item i want.
What i want to do is use data from the database without creating a data grid, how can i do that?
e.g displaying a text field from the database in a textbox, how would i do this without calling datagrid.selecteditem...?

<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication xmlns:fx="http://ns.adobe.com/mxml/2009"
   xmlns:s="library://ns.adobe.com/flex/spark"
   xmlns:mx="library://ns.adobe.com/flex/mx" creationComplete="windowedapplication1_creationCompleteHandler(event)">
<fx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.events.FlexEvent;
import mx.rpc.events.ResultEvent;
[Bindable] private var resultData:ArrayCollection=new ArrayCollection()
protected function windowedapplication1_creationCompleteHandler(event:FlexEvent):void
// TODO Auto-generated method stub
myHTTPService.send()
protected function myHTTPService_resultHandler(event:ResultEvent):void
// TODO Auto-generated method stub
resultData=event.result as ArrayCollection;
// resultData=myHTTPService.lastResult as ArrayCollection
]]>
</fx:Script>
<fx:Declarations>

<s:HTTPService id="myHTTPService" result="myHTTPService_resultHandler(event)"
   url=""/>
</fx:Declarations>
</s:WindowedApplication>
Hope this helps,
Balakrishnan V

What Resolution to use from Istock for Youtube?

Similar Messages

Maybe you are looking for