What roles are required to run the export import?

Hi,
I want some info on roles are required to run the export import.
I have done the following in sys user:
GRANT EXP_FULL_DATABASE TO IMP_TEST
GRANT IMP_FULL_DATABASE TO IMP_TEST
But Doing the above command the IMP_TEST will get all priviles (also the system tables)
Is there any mechanism to restrict the user to export and import only the tables not anything?
Thanks and Regadrs

Hi!
If you create a user like this
CREATE USER imp_test identified by password;then the user will be able to import or export only its own schema. If you grant the exp_full_database and imp_full_database roles to this user like you did then the use will be able to export or import the hole database (with SYS schema). But as far as I know you can't set any more restrictions to the user.
yours sincerely
Florian W.

Similar Messages

What steps are required to configure the Payroll Tax ( USA)?

Hi All,
Please answer
What steps are required to configure the Payroll Tax ( USA)?.
Thanks in Advance
Thank you,
GKReddy.K

hi Dan
this is covered in the Rapid Clone documents -- Refreshing a Target System
Note: 230672.1 - Cloning Oracle Applications Release 11i with Rapid Clone
Note: 406982.1 - Cloning Oracle Applications Release 12 with Rapid Clone
you should run adautocfg.sh on the application tier as well. Otherwise the essential information regarding your application tier will not be registered within the database and you will not be able to connect to your database through the application.
adcfgclone will not be necessary on the application tier.
Yes, you need to run AutoConfig to populate FND_NODES with the application nodes information. You may also need to clear the FND_NODES table as described in the following note:
Note: 260887.1 - Steps to Clean Nonexistent Nodes or IP Addresses from FND_NODES
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=260887.1
source;- https://forums.oracle.com/thread/652681
AppsMasti
Sharing is Caring

What roles are required to use Guided Procedures?

Hi ,
What roles are required to use Guided Procedures?
Thanks
Srinivas.K

Hi,
Refer this block https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
Thanks,
satheshkumar.R

What adapters are required to connect the shuffle to a speaker?

Can a Shuffle be connecter to an external speaker? If so, what adapter is required?

now to my question - what components would be
required to develop and run a program in writtenin
java that would be able to fulfill therequirements
and how can I tell if these components areavailable
on
the windows 2000 server where the databaseresides?
J2SE SDK, the JDBC tutorial, the JDBC driver class
for the database (should come with the DB). that's
all.thanks for the response.

What roles are required with OWB?

What are the different roles or skillsets required to implement OWB (developer, DBA, analyst, modeler)? What are most of you seeing as far as management of the OWB in general? I'm afraid this is another one of those "the DBA does that" things. What are your experiences. Thanks.

It's just nothing like developer, dba, analyst , modeller and etc. For OWB, someone needs to have work experience in Oracle SQL, PL/SQL (your term developer), Managing Non-Schema objects, understanding & managing Privileges and roles from sys level to down at user level (DBA), define the source building the mart (modeller). SOme ONE has got good DBA(OCP) with strong PLSQL is the one will be verygood in OWB...

What ports are required to run facetime from iPad2 ?

My iPad 2 works fine, but trying to use Facetime with an iPhone in or outside the house fails with no error message.
This seems to do with ports of a firewall, but don't know the adequate details.

Try it locally on the server itself.
You just need to create a shared directory backup oon the server on C:\ drive.
\\127.0.0.1\C$\backup
This should work.
Link to port utilization guide:
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_7_0/configuration/guide/uccx70prtuti.pdf
Regards,
Chuck
Please rate helpful posts and identify correct answers.

Is Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.

All I want to know is if Distributed Transaction Coordinator services of the application role are required by SQL Server 2012 for clustering and support of SharePoint 2013.
I have been planning and deploying my companies first Windows Server 2012/SQL Server 2012 Always On cluster and Always On Availability Groups Multi-Subnet cluster and instances for SharePoint 2013, and I will be brutally honest, the documentation on either
the MSDN and TechNet leave alot to be desired. Continually finding links in the documentation will take me from a Windows 2012 reference to a page talking about Windows Server 2008 or R2, The differences of which there are so many when it comes to configurations,
settings, roles, services when working with SQL Server 2012. I have been confused, frustrated, screaming mad, with all the misdirection in this documentation. The documentation takes me windows 2008 R2 which is different than 2012!
Tired and trying to pick myself up off the floor!
Greg
Gman

In general, DTC is not required for SQL 2012. But, since you are asking specifically about SharePoint, it would be better to ask in a SharePoint forum. They would be more likely to know those situations where FTC might be needed by SharePoint.
.:|:.:|:. tim

Error: JavaFX runtime components are missing, and are required to run this

I tried to build the application using javafx ant build, generated jar file. But when I run the jar file, issue:
Error: JavaFX runtime components are missing, and are required to run this application.
The javafx-class-path: libs/h2.jar libs/jfxrt.jar libs/log4j.jar
Running the JAR file using:
java -jar app.jar
What could it be?

Which version of iTunes?
When you go to Programs control panel you can see as well as uninstall the current version.
I always uninstall Bonjour, MobileMe etc and itunes will ask if I want to reinstall those (no thanks).
itunes and many apps keep an installer cache so they can do a repair-reinstall without a full install again.
I'd install Microsoft Security Essentials 2.0 which is free and excellent.
Programs don't affect data. But if you don't have backups, you are likely past due.
If you have any doubts about the integrity of your system, if you have had to do a hard power down and likely do have issues, you should / could / might want to do chkdsk on your hard drive (hard drive properties tools scan for errors).

GRID Control Server (OMS) - what services are required?

What services are required (and what is the startup order) on the Windows 2003 GRID Control Server (OMS). The target database is 10g on Solaris.

Hi.
I assume that you have three folders in the oms installation folder, called oms, agent and db.
You should first start the grid database on the 2003 server along with the listener from the db folder.
Than you should install the application server processes by running:
opmnctl startall from the oms\opmn\bin - folder.
Than you should start the agent by runnint agent\bin\emctl start agent
You should further start the agent on the Solaris node and verify the upload to oms:
$ORACLE_HOME/bin/emctl start agent
$ORACLE_HOME/bin/emctl status agent
Good luck
rgds
Kjell

What changes are required for OSS note 456507

Hi All,
PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
Im thinking of just going with the following additions to Role
AAAB Cross Application Auth Objects
S_RFC
Activity 16
Name of RFC - *
Type of RFC - *
But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
Your advice would be greatly appreciated.
Thanks in Advance.
Regards,
Sandhya.

Hello Sandhya,
S_RFC is needed in case of making any RFC calls.
Normally it is needed for users that are mentioned in RFC destinations.
As such mostly these users are system/communication users or super users.
Without giving access to function groups through S_RFC successful RFC call can´not be done.
Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
By global super users I mean users which are used for various types of activites.
Please award points accordingly.
Regards.
Ruchit.

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

What locks are required on a table when Oracle is processing an UPDATE

What locks are required on a table when Oracle is processing an
UPDATE statement?

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version.
>
What locks are required on a table when Oracle is processing an
UPDATE statement?
>
Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
>
Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
>
The above describes the locks when you, the user, tells Oracle to lock the row.

What amps are required to charge an iPhone 5s

what amps are required to charge an iPhone 5s

watt = amps *volt
this mean
amps = watt / volt
the ac charger is 5Watt and 5volt
so 1 amp
but the phone also charge at usb which in some cases is 5volt 0.5amp == 2.5watt
are you looking for how further down then 0.5 amps you can go ?
the lower the amps the slower it charges

Hyperion Planning Fusion Edition, what components are required?

Hello,
Currently we're planning to install Hyperion Planning Fusion Edition, but we're not certain what components are required if we want to use Planning with EPMA/BPMA. Can someone post a list of components/applications required?
Additionally, where from can we download Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition, v11.1.1.1.1? The documentation states that such a version exists, however we're unable to locate it on Oracle's web pages.
Thank you
Regards
Marcin Stawny

Hi,
You will need the following :-
Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.1.1.0
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.1.0 - Part 1-3
Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition Release 11.1.1.1.0
Oracle Essbase Client Release 11.1.1.1.0
Oracle Essbase Server Release 11.1.1.1.0
Oracle Hyperion Provider Services Release 11.1.1.1.0 (if you want to use SmartView)
Oracle Hyperion Planning, Fusion Edition Release 11.1.1.1.0
Oracle Hyperion Smart View for Office , Fusion Edition Release 11.1.1.1.0
You can find the files on Oracle edelivery or here
Cheers
John
http://john-goodwin.blogspot.com/
John

What Files are required to install R12 VISION with out Express selection???

Hi,
I had installed R12 before, and i could nt received any error. installation was OK,
Now i am installing in same way on diffrent machine now i am getting error
E:\oracle\....\visdb\....\temp\oradun91.cmd (Some thing like that). I think i have missed some files.
this error come at setp 1 of 5.
when 91 files unzipped successfully.
I want to know which file is missing. LOG file does not shows the name of missing of folder or directory name.
What Files are required to install R12 VISION with out Express selection on Windows server 2003.
so that i extract that file again.....
thanks a lot
regards.
kalash

Please check the following log files for any further details about the error:
1) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>.log
2) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/dbInstall.log
I assume you are using the same Stage area, so it should work fine no matter what instance you are trying to install.
What Files are required to install R12 VISION with out Express selection on Windows server 2003What do you mean by missing and required files? As stated above, you should have the complete stage area staged properly.

What roles are required to run the export import?

Similar Messages

Maybe you are looking for