What roles are required to use Guided Procedures?

Hi ,
What roles are required to use Guided Procedures?
Thanks
Srinivas.K

Hi,
Refer this block https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/3603. [original link is broken] [original link is broken] [original link is broken]
This blog is very useful to u and in this blog she is explained what roles to needed for Guided Procedure.The Composite Application Framework role is used for the Guided Procedure in the Portal.First create the user and then assign the CAF role for that user.This is way to obtain the Guided Procedure for that user.
Thanks,
satheshkumar.R

Similar Messages

What roles are required to run the export import?

Hi,
I want some info on roles are required to run the export import.
I have done the following in sys user:
GRANT EXP_FULL_DATABASE TO IMP_TEST
GRANT IMP_FULL_DATABASE TO IMP_TEST
But Doing the above command the IMP_TEST will get all priviles (also the system tables)
Is there any mechanism to restrict the user to export and import only the tables not anything?
Thanks and Regadrs

Hi!
If you create a user like this
CREATE USER imp_test identified by password;then the user will be able to import or export only its own schema. If you grant the exp_full_database and imp_full_database roles to this user like you did then the use will be able to export or import the hole database (with SYS schema). But as far as I know you can't set any more restrictions to the user.
yours sincerely
Florian W.

What roles are required with OWB?

What are the different roles or skillsets required to implement OWB (developer, DBA, analyst, modeler)? What are most of you seeing as far as management of the OWB in general? I'm afraid this is another one of those "the DBA does that" things. What are your experiences. Thanks.

It's just nothing like developer, dba, analyst , modeller and etc. For OWB, someone needs to have work experience in Oracle SQL, PL/SQL (your term developer), Managing Non-Schema objects, understanding & managing Privileges and roles from sys level to down at user level (DBA), define the source building the mart (modeller). SOme ONE has got good DBA(OCP) with strong PLSQL is the one will be verygood in OWB...

What parts are required to use a CB-68LPR in a CA-1000?

Hello,
I want to use a CB-50LP, CB-68LPR, or SCB-68 in a CA-1000.
Is there an NI part number for a ribbon cable that goes from the CB-50LP to the back of the CA-1000?
Is there an NI part number for a ribbon cable that goes from the CB-68LPR to the back of the CA-1000?
Is there an NI part number for a ribbon cable that goes from the SCB-68 to the back of the CA-1000?
How does the connector blocks mount to the bottom of the CA-1000?
Are there predrilled holes in the CA-1000 for mounting the connector blocks?
Are mounting screws provided?
Kevin.

Hi Kevin,
One way you can find more information on the CA-1000 is to search our website.
I found some of the following links which you should find helpful.
Product Manuals: CA-1000 Configurable Connector Accessory Enclosure Installation Guide
KnowledgeBase: Part Numbers for CA-1000 Accessories
Probably the best thing you can do though is to contact one of NI's
Technical Sales Representatives as they know the best configurations,
prices and connectors for our various devices. At the bottom of the product page there are some links that look like this:
Do You Have Questions?
Option 1
Call me now!
[more info]
Connect instantly with your Technical Representative.
Option 2
(800) 531-5066
Option 3
[email protected]
They can give you more complete information on your system specs and costs than is easily found on your own.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments

Creation of Vendor in MDM using Guided Procedure ...SDA not found

Hi All,
We are trying to create Master data Using Guided Procedure.
After deploying MDM components on Portal we are able to see the standard iViews provided by SAP on Portal.
We are using the following PDF to create the scenario.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/763845b3-0b01-0010-a1a6-c1763df8f049
According the PDF we have to deploy following two sda on the portal server to see the GP callable Object.
H2G_GuidedProcedures.sda
H2G_SourceCode.zip
But we are not able to find Follwoing sda on even Service Market Place.
If anyone knows from wher to download these two SDA, Let us also Know.
Thanks in Advance for Help.
Regards
Shruti.

Shruti,
While clicking on link that is given in PDF for these files its saying:
Error - download expired
Sorry, the file you want to download, is already deleted or the id is incorrect.
Perhaps we require a special ID of basis guys because it might be possible we dont have access to these files.
Just check with your ITICS team.
BR,
Alok

MDM Material Master data creation using Guided Procedures

Well, i searched a lot on the forums but didnt get any thing.
My requirement is to use MDM Java APIs for creating material master data using Guided Procedures. However, i got one nice document "[How to create master data centrally using guided procedure|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92811997-0d01-0010-9584-f7d535177831]". This doc discuss about business partner creation and also have a link to downloadable file. But now when i click on this download link, it says download expired !
Can anyone please post a valid link to these deployable files?
Or anyone could post some usefull materail or links on the above mentioned requirement?
Kindly reply, any help will be highly appreciated.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:29 AM

Wow, that was indeed a quick reply i have ever got on SDN. Thanks for the excellent link jitesh. However, where will i get the deployable files that it selects in the Import GP/CAF contents step of the demo? those are the webdynpro components files. One is SCA and other is SDA. Where will i get them?
Kindly post the link to those files if u have them or else send it across.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:53 AM

What changes are required for OSS note 456507

Hi All,
PLease advise me what changes are required for OSS note 456507 (Assign the function groups QOWK or ORFC in the authorization object S_RFC to tRFC/qRFC users).
Im thinking of just going with the following additions to Role
AAAB Cross Application Auth Objects
S_RFC
Activity 16
Name of RFC - *
Type of RFC - *
But wanted to check what the implications of doing such a thing were, are there any negative points that you can think of opening up the access as above, as opposed to what was suggested in the OSS note?
Your advice would be greatly appreciated.
Thanks in Advance.
Regards,
Sandhya.

Hello Sandhya,
S_RFC is needed in case of making any RFC calls.
Normally it is needed for users that are mentioned in RFC destinations.
As such mostly these users are system/communication users or super users.
Without giving access to function groups through S_RFC successful RFC call can´not be done.
Now the value of field name of RFC can be * but only for those users which are really global super users. In case you need this authorization for any selective functionality as in you case only for function groups QOWK or ORFC then you should try to restrict the access. Negatiity is only that in case of * the authorization access increases but for system or super users you dont need to worry too much really because with system/communication users no one can login and the super users will have sap_all generally. Also their passwords will be a well kept secret so that a miususe can not be made.
By global super users I mean users which are used for various types of activites.
Please award points accordingly.
Regards.
Ruchit.

What Systems are the Pros Using for Premier, After Effects, and SpeedGrade?

I bought the full Creative Cloud in hopes of making a career for myself in audio/visual editing. The problem is, my system doesn't seem to be able to handle the software, particularly when changing back and forth between the three programs mentioned above. Beyond that, my first project failed to export properly. Moreover, all throughout its development the system lagged badly. And this is after having followed all the preferences recommendations available in the Adobe's tutorials and elsewhere on the Web.
Here's my system:
SYX-P67A-C43: Intel Core i7 2600 (an 8-core unit) at 3.4GHz, with 8 Gigs of RAM (soon to be 16) with a GTX 550 NVidia Card, 1Gig of RAM.
As you can see, this is far in excess of what Adobe claims to be the minimum system requirements. It's obviously NOT.
What systems are the Pros using (like the guys in the tutorials) for Premier, After Effects, and SpeedGrade? Give me the exact machines with all the specs so I can price one up.

...although a little " old" now.....the fundamentals of your machine are still OK to get started IF you : 1. INCREASE your system memory to the full 32 GB....should make a BIG difference in performance.....8 GB is NOT enough, it will HINDER performance. 2. OVERCLOCK your CPU !!!.....many owners of your CPU have been safely running at 4.5 Ghz or HIGHER...some at 4.8 Ghz !!! This OC will make a DRAMATIC improvement as CPU speed is a huge factor in performance. 3. Improve your video card to a new NVidia 970 with 4 GB of video memory. 4. Check and MAKE SURE the power supply in your machine is ADEQUATE to handle everything, esp. if you overclock the CPU....generally 850 to 1,000 watts of a quality make is good. 5. Use a fast storage system...that means a SATA III SSD as your "C" drive, ( boot drive), being a Crucial M550 series,( or, M600 series), OR, a Samsung 850 Pro series SSD, ( more expensive). Other SSDs are NOT recommended, only these two makes are recommended for technical reasons. On this "C" drive, you should have Operating system, Programs, and Windows page file ONLY !! Your "D" drive can be ANOTHER single SSD to be used as a "cache drive" for all the previews, media cache, and cache files that Premier Pro creates PLUS, it can ALSO serve as the "Global Performance cache" used in After Effects. All your media and project files can go on your "E" drive. HERE you would have LIMITED OPTIONS because your motherboard only has TWO SATA III ports, ( which would already be used b the "C" and "D" SSDs). You NOW have only 4 SATA II ports left ......you COULD RAID 0 four 1 TB HDDs off these ports and have a 4TB backup drive connected to one of your TWO USB 3 external ports.....any DVD or Blue-ray can ALSO go on an external port.
However, if you are into spending REAL MONEY !!!.....Go Haswell E and X99 all the way !!...THAT will give you great performance !!

What settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE

hai friends
what settings are required for DP_PROC_TY,CT_PROC_TY,TEND_TYPE
Thanks a lot
Regards
VinayKrishna

Hi Vinay,
1. For DP_PROC_TY you need to give the transaction type or R/3 document type you want to use for creating direct material POs. Could be ECDP given in the standard or copy of which you might have created.
2. For CT_PROC_TY it is either PCTR or GCTR depending what you want to create local contract or GOA.
3. TEND_TYPE can have BID, RFCR etc depending on what type of bid invitaion you want to create form sourcing cockpit or as follow on bid invitaion.
Ragards,
RRK.
Do reward points for useful answers
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM
Edited by: Ramakrishna Rallapalli on Jun 16, 2008 9:06 AM

What locks are required on a table when Oracle is processing an UPDATE

What locks are required on a table when Oracle is processing an
UPDATE statement?

Welcome to the forum!
Whenever you post provide your 4 digit Oracle version.
>
What locks are required on a table when Oracle is processing an
UPDATE statement?
>
Here is a relevant quote from the 'Lock Modes' section of the doc that Ed Stevens provided
>
Assume that a transaction uses a SELECT ... FOR UPDATE statement to select a single table row. The transaction acquires an exclusive row lock and a row share table lock. The row lock allows other sessions to modify any rows other than the locked row, while the table lock prevents sessions from altering the structure of the table. Thus, the database permits as many statements as possible to execute.
>
The above describes the locks when you, the user, tells Oracle to lock the row.

Universal worklist using guided procedure

Hi ,
Can any one send me the simple example which will demonstarte the use of universal worklist using guided procedure.
Thanks.

Hi,
Please go through the link below:
https://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6b66d7ea-0c01-0010-14af-b3ee523210b5&overridelayout=true
The below link gives all the info required for GP.
SAP Composite Application Framework - CAF Tutorial Center
Hope this helps.
Cheers-
Pramod

Central Master Data using Guided Procedures

Hello Experts,
I am working on a scenario where we have to create master data centrally using Guided Procedures. I don't have any idea about GP. We have to implement an approval mechanism using GP for our custom repository.
I have read the PDF document available on sdn regarding this. But its for MDM5.5 SP04 and the files are also not available for download.
We are currently working on MDM5.5 SP06 Patch2.
Is anybody working on the same scenario?? Any help regarding this, as to how to implement this scenario will be really appreciated.
Thanks in Advance,
Becky.

Hi Markus,
Thanks for your response, but unfortunately i have already referred to that link.
I am actually having problem in locating (or creating new ones), those 2 files which are deployed through SDM in the scenario given.
Can anybody help me with this part?? I am working on MDM5.5 SP06 Patch 2.
Regards,
Becky.

Iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted? Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

iba allow others to make text edits. What workflow are you guys using to allow others to make text edits once the iBook has been layed out and formatted? Is it too late? Do I need to export txt then reimport the editted text and reformat it all again?

Hi Ken,
Thanks for the reply. The project I am working on is a test project for a customer. They could potentially want a number of their educational subjects presented as an interactive text book. The intent of this first project with them is to establish a logical workflow that will allow us to efficiently estimate costs and allow for review throughout the design process. Having worked with customers on creative projects in the past I can anticipate that they will want a number of changes made once they see a working version of the interactive text book.
It is a grim reality that no project can be fully edited and planned prior to working on it and I know revisions and changes are always made once the customer can see their product. It is ok with me if there is no easy way to pass the text back and forth from the customer and me without having to reformat everything but I just want to know that is the way it works in order to provide a realistic time estimate for the project.
My hope was I would be able to export the formatted text, allow them to make edits and then reimport that formatted text. The style sheets I am using are from one of the iBooks Author templates.
Do you know if there is a way to use (or export ) this style sheet so it can be used in a Pages Document?
Or, would the best option be to have the customer install iBooks Author? This would require the customer to have a mac and the software so it doesn't work for all cases.
Another idea I was considering would be to export the book as a PDF and have the customer add markup and notes to the PDF.
All of these options do not seem too great to me.
I am open to any ideas.
Thanks,
Rob

Hyperion Planning Fusion Edition, what components are required?

Hello,
Currently we're planning to install Hyperion Planning Fusion Edition, but we're not certain what components are required if we want to use Planning with EPMA/BPMA. Can someone post a list of components/applications required?
Additionally, where from can we download Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition, v11.1.1.1.1? The documentation states that such a version exists, however we're unable to locate it on Oracle's web pages.
Thank you
Regards
Marcin Stawny

Hi,
You will need the following :-
Oracle Hyperion Enterprise Performance Management System Installer, Fusion Edition Release 11.1.1.1.0
Hyperion Enterprise Performance Management System Foundation Services Release 11.1.1.1.0 - Part 1-3
Oracle Hyperion Enterprise Performance Management Architect, Fusion Edition Release 11.1.1.1.0
Oracle Essbase Client Release 11.1.1.1.0
Oracle Essbase Server Release 11.1.1.1.0
Oracle Hyperion Provider Services Release 11.1.1.1.0 (if you want to use SmartView)
Oracle Hyperion Planning, Fusion Edition Release 11.1.1.1.0
Oracle Hyperion Smart View for Office , Fusion Edition Release 11.1.1.1.0
You can find the files on Oracle edelivery or here
Cheers
John
http://john-goodwin.blogspot.com/
John

What Files are required to install R12 VISION with out Express selection???

Hi,
I had installed R12 before, and i could nt received any error. installation was OK,
Now i am installing in same way on diffrent machine now i am getting error
E:\oracle\....\visdb\....\temp\oradun91.cmd (Some thing like that). I think i have missed some files.
this error come at setp 1 of 5.
when 91 files unzipped successfully.
I want to know which file is missing. LOG file does not shows the name of missing of folder or directory name.
What Files are required to install R12 VISION with out Express selection on Windows server 2003.
so that i extract that file again.....
thanks a lot
regards.
kalash

Please check the following log files for any further details about the error:
1) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/<MMDDHHMM>.log
2) <RDBMS ORACLE_HOME>/appsutil/log/$CONTEXT_NAME/dbInstall.log
I assume you are using the same Stage area, so it should work fine no matter what instance you are trying to install.
What Files are required to install R12 VISION with out Express selection on Windows server 2003What do you mean by missing and required files? As stated above, you should have the complete stage area staged properly.

What roles are required to use Guided Procedures?

Similar Messages

Maybe you are looking for