What's a camcorder that's compatible with Final Cut Express

I just got final cut express and I am looking for a camcorder from $200 to $400 that's compatible with it. I don't know much about camcorders, and some simple straightforward suggestions would be much appreciated Thanks!

Would you like to use tape or a tapeless storage variety?
Tape cameras are miniDV or HDV, both work fine with FCE. HDV may well be out of the price range.
A base model AVCHD camera (tapeless) will also be fine.
Note: Standard AVCHD is OK but many cameras use variants like AVCHD Lite. Read the fine print.
Al

Similar Messages

  • The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    The airport card on my macbook pro is not functioning. In the airport firmware folder it says that it opens with final cut express. Is this the problem and how do i solve it?

    Hopefully one of these steps should solve the problem.
    1. System Preference > Sound > Output > Internal Speakers
        Highlight  Internal Speakers
        Make sure that Mute is not enabled.
    2. Remove the headphone.
        If you see red light in the headphone port, plug the headphone
        in and out of the port 5 or 6 times to flip the microswitch inside.
        Sound output may be stuck in the digital mode.
    3. Reset PRAM.  http://support.apple.com/kb/PH4405
    4. Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own".
    5. Applications > Utilities > Audio MIDI Setup
        Audio Devices window
        Side Bar
        Click the Built-in Output.
        Under Mute any of the boxes checked? If so, uncheck it.
    6. System Preferences > Sound> Sound Effects
        Play sound effects through:
       Select "Internal speakers" and then back to "Selected sound output device".

  • Soundtrack Pro compatible with Final Cut Express?

    I have Final Cut Express 4 installed and installed Logic Studio. Soundtrack Pro and Compressor did not install. Are these programs not compatible with FC Express?

    From the Apogee website:
    "Duet features two superb microphone inputs, each with phantom power and up to 75dB of gain. With Duet, you can record a pristine vocal track while playing your guitar or keyboard, stereo mic your acoustic or even capture a live concert."
    http://www.apogeedigital.com/products/duet.php
    It's ideal target audience would be laptop users in need of a high-quality, but very portable audio interface for Logic.
    Message was edited by: lwilliam

  • What video cameras are compatible with Final Cut Express?

    I live in Japan and was thinking of buying a Victor " Full High Definition" video camera (1920x1080). The only thing I was warned about by the salesperson is that unless I have a Blue-Ray DVD recorder/player, I will never be able to enjoy true Full HD after burning my video to a DVD. I guess regular DVD recorders/players can't support it yet.
    I have searched to find a page that tells me what video camera is compatible with my iMac G5, but no luck. Any ideas on how to find out before buying a video camera? I would appreciate anyone's advice.
    Thanks, Larry in Japan
    iMac G5   Mac OS X (10.4.9)  

    ...snip...
    You want to stay away from recordable-DVD and hard-disk camcorders,
    ...snip...
    Hope you don't mind me asking why? - As long as they've got a F/W connector how does the source media make any difference? - In fact, I would think that shuttling around would be faster with HD's or DVD's.....
    I also believe the salesperson was trying to say that he's going to need a BluRay deck in order to be able to view his HD material on an appropriately equipped TV - Which is correct, no?
    Thanks in advance for any comments,
    Cheers,
    Ian
    MBP 2.16G / 2GB FCE 3.5   Mac OS X (10.4.9)   etc etc

  • Hard drive cameras compatible with final cut express

    What hard drive cameras are compatible with FCE,
    I purchased an imac and much to my dismay my Sony dcr-sr200 doesn't work with it..
    Thanks
    John

    What format do you want to work in SD or HD? You should really ask questions about camera purchases on the video production forum. There are many factors involved here, only one of which is its compatibility with FCE.

  • Using Vado HD with Final Cut Express

    I am aware that the VADO HD is not compatible with iMovie, but is it compatible with Final Cut Express? If so, during setup of FCE what option should I use for setup? HD, NTSC, PAL, Apple Intermediate Codec, or DV/Panasonic and then under "use" which option should I use?
    thanks for ALL of the help!
    tom

    crap.
    Ok, maybe you can answer a follow up question. So, I'm new at this.... but I understand that I will have to convert the video then. In that case, is there an optimal video conversion type that I should use so that I lose the least quality? I am using MPEG Streamclip as my conversion tool.

  • Language Choice with Final Cut Express ...

    Hello,
    Like many things Mac-wise (Leopard etc), does Final Cut Express give a language option during the instal?
    I am in France and would like to have the programme running in English - but those at the Apple store are unsure. I bought Leopard from them and they didn't know whether it was available in English. It turned out that there is a language option ... is that the case with Final Cut Express?
    Thanks for your time and help ...

    You have the choice of English, French, German and Japanese.
    I can't remember whether you get the option to choose the language during installation, but you definitely do afterwards.
    You control click the FCE icon and select "Get Info".
    Then open the Language menu.
    Message was edited by: Ian R. Brown

  • Does the DCR-SR62 30GB Sony Handycam work with Final Cut Express hd 3.5?

    Hi,
    I am a new mac user and I want to get a good camera that will work with Final Cut Express hd, I am currently looking at the DCR-SR62 30GB and the HDR-UX1 dvd both by sony and I would like to know if these to cameras or one of them will work with Final Cut Express Hd. Thanks.

    Niether one of these cams are the best choice for FCE. FC can not directly work with either DVD or HD (as in Hard drive) camcorders. You will have to convert and/or rip the output of either camera, giving you an extra work step and perhaps diminishing the quality of your footage
    FCE is designed to work with DV/HDV material ... from a tape, throught a Firewire connection
    There is software like MPEG Streamclip which will allow you to convert those cam's output to work with FC but if you haven't bought them yet, I would hold off and look at a good quality tape based cam

  • What camcorder works best with Final Cut Express?

    What camcorder works best with Final Cut Express?

    Anything that's DV, HDV, or AVCHD and shhots in a format supported by the application.

  • What camcorders are compatible with final cut pro 7

    There are so many cameras that use hard disks and flash memory and I don't want to buy one that is useless with final cut pro 7. What are some guidelines I can follow?

    Yesterday I was driving home from work in the carpool lane, and a motorcycle was coming up behind me. So I did my usual pulling to the left to give the fellow ample room.  But the car in front of me veered to the right as the motorcycle approached -- obviously to try and block him.  I was quite peeved at the idiot driver, even though it had nothing to do with me.
    In the same way, I am offended by the tone av3x is using.
    I don't like how he/she is talking to you guys, with comments such as, "David, why not just answer the question?"
    Hey av3x: The people on this board don't owe you any answers.  They are not getting paid to read about your troubles.  They have invested time with you already, and you should be respectful.
    BTW, it sounds like the JVC HM100 might suit your needs.

  • Does anyone have experience with using a Canon Vixia HF M52 Camcorder with Final Cut Express?

    I'm looking to purchase a new camcorder that is compatible with my Mac OS X (10.6.8) that will work well with Final Cut Express 4.0.1  I have downloaded the camcorder support info from Final Cut Express that list many capital camcorders.  I've used Sony tape based camcorders in the past.  I'm looking for High Definition.  I can stick with a tape based camcorder, but thought I would look at the Canon Vixia HF M52 as an alternative, which is listed as compatible.  I would like to download directly from the camera to FCE.  I film in the wilderness, like having an optical zoom of 20 or greater (yes, I use a small tripod). Does anyone have experience with the Canon Vixia?  And if not, but you really like another camcorder that you can recommend, what is it?

    The Vixia HF M52 is an AVCHD camcorder and should work perfectly fine with Final Cut Express 4 (4.0.1).
    The published "camcorder support list" has never been up to date and I would not take it to be a definitive list of compatible camcorders.
    One note, however, the Vixia HF M52 supports a number of different shooting modes.  I suggest sticking with the AVCHD 1920 x 1080i / 60 fps mode for use with FCE.   FCE does not support progressive modes except in 720p25/30 (which the M52 does not seem to shoot anyway); nor does FCE support any 24 fps modes.

  • Is the Canon Legria HF M56 compatible with Final Cut Pro X

    I am new to Mac and new to Final Cut Pro X. I am looking to buy a new HD Video Camcorder to use with my new computer/software and wondered whether or not the Canon Legria HF M56 is compatible with Final Cut Pro X.
    If it is, do you have to import the footage directly from the Camcorder, or can you first save the files to the Mac and import them that way?
    I currently use a Sony HandyCam HDR-SR10 which produces AVCHD .mts files. I have these saved on my Mac after transferring them over from my PC but Final Cut Pro X cannot import them. Very frustrating for a professional app to be unable to import these files. Even Cyberlink Power Director can use these files.
    Thanks for your help
    ConvertedAppleFan

    It's not on the tested list but it may well work.
    http://help.apple.com/finalcutpro/cameras/en/index.html
    Why don't you download the trial and try it?

  • Where can I download Christmas generators / title cards compatible with Final Cut Pro X?

    I'm looking for title cards with holiday themes, snow, Christams trees, ornaments and the like. Where can I find these? A quick search online I found site that said they weren't compatible with Final Cut Pro X.
    I went to rippletraining.com and after downloading got this error message...and yet I am unable to find any applications in the App store that meet my needs.

    kristydrums wrote:
    Okay, this seems out of my league! …
    you haven't tried!
    you managed to handle FCPX, a highly professional edit-tool.
    What I suggested, is just 'basics':
    compose a few elements.
    Get inspired by other videos you notice around.
    To animate 'elements', use keyframes.
    To apply 'overlays', green-screen/color-key is a basic procedure…
    To prep stills, a designated pic-processor is of fundamental need… although, even MacOS built-in Preview.app allows creation of 'knock-outs'/transparency… in case, you're shy to invest a few $$ for Pixelmator.
    It looks maybe complicated - it isn't!
    Don't try it first time for some serious projcect… but creating your very own Xmas-scenery is a lot of fun… plus, you learn a lot about FCPX and its many hidden gems…
    Final word:
    Catch some nice, own pics with your cam! … snowy trees, 4 candles and some cookies, a frozen window, illuminations in the streets, that crazy neighbour with his 50.000Watts of garden decorations .... Just add a charming title - done. Simplicity rules!  …
    Merry Chistmas!

  • I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    Hi Nick, thanks for your help, Im rather new at editing and FCP. I did everything as it said to do in the MPEG Streamclip download tutorial, but when it finished, I tried to open the .mov files and it was just sound but no picture, just black.
    Now, another thing, the .mov converted files where saved into mi SD card after the program was done (is that ok, or should they have been saved somewhere else too?)  then i tried to put them into my FCP by using the Log and Transfer and when I selected that it gave me this message: "100MEDIA" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    Help please!! I know that these problems are probably from my lack of knowledge on the program and the whole thing.. but im working on it!!
    Thanks!!

  • Is Snow Leopard 10.6 compatible with Final Cut Studio 7?

    Is Snow Leopard 10.6 compatible with Final Cut Studio 7?
    Currently running 10.5.8 and pondering an upgrade. I have to go from snow leopard to lion, and I'm wondering what i'll applications I'll have to

    It is Final Cut Studio 3 or Final Cut Pro 7 and yes it woarks fine in snow or lion

Maybe you are looking for

  • How to set "display mode" from external keyboard

    I have an EliteBook 8570p in a docking station, with an external monitor and keyboard attached. I typically have my display mode as "duplicate", with the same thing  showing on both my laptop screen and external monitor.  I use the external monitor a

  • Sharpening tool is not working in library mode or export LR 4.4

    I was editing phots when I suddenly realized that sharpening tool, neither the adjustment brush for sharpening or ordinary sharpening, would be shown in Library mode or when photos were exported. When I see the picture in Develop mode, they seem fine

  • Easy and fast building for multiple sites

    Hi all, my first post. So, I've got a lot of sites but right now I am working on about four main ones - all commercial. In the past I had a webmaster but for the short-term and until my company is stronger financially I'm taking on the building again

  • Cant Install Flash Player 11

    Hi I am trying to install flash player and when it says installation complete nothing happens

  • Sql Developer Data Modeler 3.0 EA1: Process order/number

    When opening my version 2.0 model in version 3.0 EA1, the process numbers are as I originally saved them. After saving the model as a version 3.0 model (using "Save as..."), when I reopen that version all processes have been reordered on all levels o