What's a good overclockable ram set that'll run at 1066ish with low voltage?

Does anybody have their favorite ram that they like to nominate that I buy?  I don't think my $25 ram likes me $200 processor and $250 motherboard very much. 
Preferably ones that you've overclocked on the P7N Diamond. 
Thanks.

autumnale,
Did d3fct change the link or something?  It says $90 shipped, the PC8500 are $150 though.
Quote
Are they the Micron D9 DRAM modules do you know?
No they are Powerchips IC's.  Just to share,  D9's are 512Mbit(64MB) IC's.  The most chips you can fit on a package is 16, so you'll never see a 2GB module(or 4GB-2x2GB kit) with Micron D9's. 
I don't have much experience yet with the 780i, but I have used both the GSkills and Ballistix, and both have overclock room.
Ballistix DDR1300 with room to spare:
http://home.comcast.net/~aicjofs/everest.jpg
GSkill at 550Mhz, perfect buy for 4GB of RAM at $90
http://home.comcast.net/~aicjofs/ram550.jpg
Now I will say this about the Ballistix in general, I would just stay away from Crucials for awhile unless you don't mind RMA if it happens.  The state of things over at Crucial is just not good with respect to all the 2GB kits.  Too many sticks dying after a short while not overclocked or overvolted, Crucial swapping out the regular 8500(not the tracers) with single sided sticks that don't overclock and also die young...I personally have had to return 2 kits to them....and the IRONY is those are the 2 kits that ran at DDR500(below spec, and never overvolted)....The 16 chip Ballistix do clock like mad, but just be warned that you might not be happy with the purchase long term.

Similar Messages

  • What is a good copier and printer that is compatible my fathers 10.5.8 version.

    What is a good copier and printer that is compatible my fathers 10.5.8 version software.

    Try a PRAM reset: power down the MBP, power back up holding the following keys before the chime.  Option, command, P, R (commas) continue to hold these keys till you hear the chime 2 times.  You can also try a SMC reset:  Power down, power back up holding the following keys.  Left shift, control, option, continue to hold these keys till the gear stops spinning.  Hope this helps.  Best

  • What's a good program to use to make flyers and handouts with?

    What's a good program to use to make flyers and handouts with? I'm not a wiz with computers so nothing too sophisticated is needed. Thanks!

    Pages would be fine but there are hundreds, I'd recommend using the Mac App Store.

  • What is the latest version of firefox that foxy tunes will work with

    what is the latest version of firefox that foxy tunes will work with

    It is compatible with Firefox 9
    * getfirefox.com
    foxytunes are here
    * https://addons.mozilla.org/en-US/firefox/addon/foxytunes/

  • What is the latest photoshop elements version that will run on Windows Millenium?  Thanks for your help!

    Does anyone know what the latest Photoshop Elements version is that will run on Windows Millenium?  Thanks for your help!

    PSE 2, I think. I know that's the last one with ME listed in the sys reqs. PSE 3 might have worked, but adobe never said it would.

  • What's the newest version of iMovie that'll run on a Mac G4 OS X (10.3.9)

    What's the newest version of iMovie that'll run on a Mac G4 OS X (10.3.9)?
    My MiniDV camcorder records video in widescreen (16:9) , but the version of iMovie (version 3) I have squashes the widescreen image to a 4:3 dimension rectangle.

    Depending on how fast your processor is and your graphics card, you can run iMovie '05 or iMovie '06.
    http://support.apple.com/kb/TA24911?viewlocale=en_US
    http://support.apple.com/kb/HT2675?viewlocale=en_US
    iMovie '05 is the first (oldest) version that supports widescreen (16:9).

  • What is the most recent APPLE system that will run Tiger server?

    What is the most recent APPLE system that will run Tiger server?

    Hi Steven,
    I highly suspect by deduction that since the latest 10.4 Server was 10.4.7, that these would be the latest since they came with 10.4.7 client at least...
    Mac Pro - MA356LL/A - MacPro1,1 - A1186 - 2113
    Mac Pro - BTO/CTO - MacPro1,1 - A1186 - 2113
    But if you have 10.4.0 or 10.4.3 Server then likely A Late 2005 G5 would be the latest.

  • What is a good opensource rtmp server that support SharedObject.getRemote() and does sync events ?

    Since adobe stratus does not support shared objects what is a good alternate  open source
    rtmp server
    thanks    

    Red5

  • Can I set the "step run mode" -property with the property loader

    Is it possible to set the "step run mode"-property  by using the property loader to "Skip" , "Normal" or "Force PASS" ...in TestStand 3.0 ?

    I turned on Station Options>>Preferences>>Show Hidden Properties and then exported the Step.TS.Mode property to a limits file. I then added a PropertyLoader step and it functioned correctly. 
    Note that importing a hidden TS subproperty makes an edit to the sequence file, even if done at runtime. Thus if you later save the file, you might end up inadvertently saving the last imported values. This isn't necessarily a problem if the values in the file are always overwritten by a property loader step.
    (btw, I tested this in 4.0, but I'm hopeful it would also work in 3.0)

  • What is the GRANT or permission setting that allows viewing of package body

    For purposes of SOX and security/audit control, we log in under our network id's in our production environment. We have sourcecode compiled into Oracle seeded schemas ( APPS ) so that scheduled jobs are able to run with submitted from the Oracle Applications environment. We don't compile code into our personal network account areas.
    I know how to GRANT EXECUTE privs so that we can execute a package in another schema, but what I want to do is to be able to view the sourcecode in another schema. Compile into APPS but be able to see the package body from my network id schema account.
    I can't seem to find what the correct permission is anywhere. Granted I can look at DBA_SOURCE to get to it, but I want to use a tool like SQL Developer or TOAD to look at the code in a more presentable and easier to debug manner.
    Any help ?

    I guess you need GRANT DEBUG ON SCOTT.PKG TO U
    SYS@LSC01> create or replace package scott.pk is procedure p; end pk;
      2  /
    Package created.
    SYS@LSC01> create or replace package body scott.pk is procedure p is begin null; end; end pk;
      2  /
    Package body created.
    SYS@LSC01> grant create session to u identified by u;
    Grant succeeded.
    SYS@LSC01> grant execute on scott.pk to u;
    Grant succeeded.
    SYS@LSC01> connect u/u
    Connected.
    U@LSC01> select text from all_source where name='PK';
    TEXT
    package       pk is procedure p; end pk;
    U@LSC01> connect / as sysdba
    Connected.
    SYS@LSC01> grant debug on scott.pk to u;
    Grant succeeded.
    SYS@LSC01> connect u/u
    Connected.
    U@LSC01> select text from all_source where name='PK';
    TEXT
    package       pk is procedure p; end pk;
    package body       pk is procedure p is begin null; end; end pk;

  • I HAVE MANY OLD SLIDES FROM MY FAMILY,WHAT IS A GOOD 35MM SLIDE  SCANNER  THAT CAN BE USE WITH MY MACBOOK PRO?

    Hi,
    Can anyone recommend a scanner or other device for old family slides that must converted in a digital format  and saved in a DVD and external hard drive?
    Thanks
    Wandafromqc

    Don't even think about scanning thousands of slides yourself. If you have 5000 family slides, it's overwhelmingly likely that just 500 of them will give a highly effective representation of the whole collection, and will include not only all of the best ones but many of the second-best ones too. Scanning them all, or even half of them, will consume your entire summer and would probably give you and your sibs a lot more pictures than any of you really wants to keep.
    It used to be true that scanning slides halfway decently required an expensive dedicated film scanner -- consumer flatbed scanners just weren't up to the task. That's no longer true. I have an under-$200 Epson Perfection V500 Photo flatbed scanner that outperforms the $2000+ Nikon film scanner I've had for 9 years in slide and negative scanning, and the software that came with it enables me to scan several (6 if I remember right) slides at once and automatically saves them as separate image files. That makes it much faster to use than the film scanner, and of course I can also use it for scanning flat reflective material, such as the more than 1000 old photographic prints and post cards I've digitized for my local historical society. The film scanner couldn't have done any of that.

  • What are some good cases for iPad2 that have a notebook inside?

    Hello! I luv meh i pad 2 and i wanna case with a notebook attached. Any links or opinions would be appreciated!   thanks, Katrina the tech girl.

    Hello! I luv meh i pad 2 and i wanna case with a notebook attached. Any links or opinions would be appreciated!   thanks, Katrina the tech girl.

  • If I have OSX v10.6.8 What is the best version of numbers that will run on my computer?

    I have an old laptop I'm trying get every last bit of life out of.
    I want to get numbers but with the new App store the only version of numbers that they sell will not work on my computer.
    So how do I go about figuring which version of Numbers I need and How do I get it?

    You need to buy an iWork 09 DVD from a source such as Amazon or eBay.
    (76668)

  • What's the latest version of FireFox that won't conflict, ever, with any version of Kaspersky?

    Right now, using Kaspersky 9.0.0.736 and FireFox 3.6.27. Would like to upgrade both Kaspersky and FireFox, but don't want any conflict between the two versions. So would like to know how high I can go on FireFox, for starters. Using plugins AdBlock and NoScript, and want to keep those plugins.

    You need to upgrade your Kaspersky to version 2012 which fully compatible with Firefox 10, & 11,See:
    * support.kaspersky.com/kis2012/tech?qid=208285948
    upgrade is free during license period it means you can activate latest version of Kaspersky using current license.upgrading Tips, instruction are located here
    * http://forum.kaspersky.com/index.php?showtopic=209835
    [https://addons.mozilla.org/en-US/firefox/addon/adblock-plus/ Adblock Plus] 2.0.3 and [https://addons.mozilla.org/en-US/firefox/addon/noscript/ Noscript] 2.3 are also works well with Firefox 10 :)
    Firefox 10 is here
    * getfirefox.com

  • What is the oldest Premiere Elements version that will run on Windows 7 64 bit?

    I am a teacher who recently upgraded to Win 7 much to my irritation.
    I have taught a junior high class teaching Premiere Elements 3 until this year. It crashes with the Windows 7 64 bit system. I am heart sick. We cannot afford a lot of new "stuff". So, do you know which of the older Premiere Elements versions will function correctly on these machines.
    Thanks,
    ACP

    annp062647
    You should be able in install and run Premiere Elements 4 on Windows 7 64 bit without issue.
    The question is where to find older versions in stock somewhere. If you purchase from a private source, you
    may get involved with the Adobe Licensing Transferring matter.
    http://helpx.adobe.com/x-productkb/policy-pricing/transfer-product-license.html
    When you tried to use Premiere Elements 3 on Windows 7 64 bit, did you also try to install its 3.0.2 Update along with it?
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=3565
    Did your Windows 7 64 bit arrive at a time when Microsoft was still supporting Windows XP Mode? If so, you could install Premiere Elements 3
    in the Windows XP Mode of Windows 7 64 bit to have access to it in Windows 7 64 bit workspace. (The Windows XP Mode is a virtual Windows XP Professional
    SP3 32 bit).
    Please review and consider.
    ATR

Maybe you are looking for