What's a good usb tap tempo device?

As a guitar player, using MS for delay effects, I need to reset the delay time on the fly as drummers (inevitably) speed up. I find the touch pad on my MBP doesn't always track my taps accurately, so I'm looking for a usb controller to map to tap tempo. Has anyone found a really accurate one?
Soma

Your method is accurate, but doesn't help in my situation. Using a knob to enter a numeric tempo is a best guess method, that can be refined, or dialed in, as you go. I am listening to live drummers, and need to enter the tempo accurately on the first try, or my delays create havoc. I need a very accurate tapping device.

Similar Messages

What's a good usb remote for MacBook Pro 15" retina?

I don't want use the keynote remote app and need a good usb-based remote control for my presentations. Any suggestions?
thanks,
JD

Well, my Early 2008 MBP could run AHT without requiring any external stuff back in April 2008....
However, there have been reports that it gets screwed up with some upgrades, especially when Lion sets up its Recovery Mode partition. MBPs with Lion-from-factory do run AHT without requiring anything else (which of course you do not have from that cat on forward).
Can't say much about the snowy cat since it was a lost species to me. My old Leopard MBP died horribly and had to jump directly to Lion without further ado.

What's a good USB 3.0 hub?

I've got a late 2012 Mac mini. Mavericks OS (10.9.4). I have lots of USB devices, most of them of the 2.0 variety, a couple 3.0. I bought an inexpensive "USB 3.0" hub, and it causes the Mac not to wake from sleep mode. Instead it just powers off, and I have to unplug it from the wall before it will reboot. So I've gone back to my old 2.0 hub for the majority of my gear, but I've got a couple of drives that want 3.0 connections to function efficiently.
From what I can tell, it's the mixing of USB 2.0 and 3.0 that is causing problems. I'm not sure if the ports on the mini are paralleled, or are on separate power and driver chips. But so far, I can keep 3.0 devices plugged into the computer and 2.0 into my hub. That's fine 'til I need to plug in a 3.0 flash drive. I cannot make it work with the two hubs - I still have the same "no wake up" issue, unless nothing is plugged into the 3.0 hub. SO...
Who makes a robust USB 3.0 hub? The Belkin sold at the Apple website has roundly terrible reviews. I'd rather not be a guinea pig again. Does anyone have serious experience with these? It's not enough that you have one and it works. I'd like to know that you understand the workings a bit better than I do, and maybe can even explain to me what might be causing this incompatibility.
Thanks.

Re: Is there a USB 3.0 Hub that really works with the Mac Mini?

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

When i connect my iphone 5 to my pc using the usb cable, my device is not recognized yet when connected to a power source, it charges normally. What should i do to rectify the problem and read sth about debris being in the usb. How do i remove that?

iOS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

My old Intel-Based iMac is no longer recognizing USB wired input devices; it only recognizes Bluetooth. What happened?

My friend's old Intel-Based iMac is no longer recognizing USB-wired input devices (Kensington TrackBall, Logitech Mouse) plugged into any USB slot at the back of the computer.
They were working before and for many years.
All of a sudden, A pop up window came up. IT said no Bluetooth mice could be found. We don't know what set off that window to pop up and look for a WL mouse. It never has before in the 5 or more years my friend has been using this computer.
I supplied a wireless Apple mouse and his is back running again.
But want to know why his USB-input devices (Except his keyboard) are not being recognized. He would prefer to use his Trackpad (Wired), but can't find anything in SYstem PReferences to allow that. The computer only seems to want a Bluetooth input device.
Anyone have an idea what happened and if this can be reversed?
I think he is still running Mac OS X 10.5.8.

Hi Carol, lets try this...
reset FW bus, same goes for USB reset...
Reset the Firewire bus
If your Firewire or USB isn't recognizing any device. A solution which has worked for some whose hard drive became invisible in 10.4 was simply to follow these four steps to reset the Firewire/USB bus:
1. Shut the machine down.
2. UNPLUG the power lead to the computer and any firewire/USB drive/devices.
3. leave it for 10 minutes.
4. Connect back up and reboot.
http://www.macmaps.com/firewirebug2.html

What's a good video cature device?

So I was wondering, what is a good media capture device for
streaming? I'm thinking an external for portability purposes. Also
when I buy one, whats a good software to get along with it? Adobe
Premiere Elements, Sony Vegas+DVD Production Suite? I'm sort of new
to the video side of web design.
Also, if i'm doing HD. Would I have to buy on of those really
expensive ones? Not just the ones for DV. But also, MPEG/HD/HDV
etc.?

I'm also using 1680x1050 on two wide screen monitors on two different nvidia cards. a nvidia7900 and a nvidia6800. Everything works fine. They are set up as independent screens. The third monitor isen't a wide screen and it's on a third card nvidia geforce4. Anyway, if it helps, you can find my xorg.conf file in the wiki. It's the last one in the list.
http://wiki.archlinux.org/index.php/Xor … conf_Files
The only thing I changed in the file since I posted it was the order of the font paths.
Last edited by Leigh (2007-08-28 05:27:00)

What's a good karaoke program/app for the iPhone, iPad and Macbook Pro. I need lyrics and tempo shown.

What's a good karaoke program so I can practice at home ? I need the lyrics and tempo shown like a professional setup for the pc windows lline and the app should be similar throught IOS platforms and Mac.

You'll need an adapter cable, and which one you need depends on what version MBP you have and the inputs on the monitor.
I just recently purchased a Dell U2410 to use as a second display with my iMac. Overall I'm pretty happy with but my use is a little different, I wanted something with very good color accuracy for photo work. Based on what you said your needs are, you probably don't have to spend as much.
One thing I will say, is this particular monitor (and I believe all Dells) has an antiglare screen on it, which to be honest, took me a little getting used to. Because of the matte surface, text and documents aren't quite as sharp and can even look a little hazy at times. For your uses you may be better off with a glossy screen as long as glare isn't going to be too much an issue for you.
BenQ makes some pretty nice and affordable monitors these days LED backlit or otherwise, and on that note, theres absolutely nothing at all wrong with non "LED" monitors, both technologies are still using an LCD panel for the display, they just deal with the backlighting differently.
As the other poster mentioned, NEC is always a good option as well. Less common on the consumer side, but they make very good professional products.

What is the disadvantage of using USB 3.0 device through USB 2.0 port?

My mac only has USB 2.0 but I'm told to use an external drive with USB 3.0 for better speed. Do I forfeit the 3.0 speed by plugging into a 2.0 port? Even though the 3.0 device is compatible with 2.0, is there a disadvantage?

Thanks for the reply. So basically, if I want to fully utilize the speeds available for USB 3.0 devices, I need a new mac, right? Is there an adapter or workaround? I have memory-intensive sound libraries for use with Logic that are recommended to be stored/run from a SSD or 7200 rpm USB 3.0 drive, so I'm trying to determine if it's worth it to fork out the cash for an expensive external drive, or if it doesn't gain me anything anyways because I'm limited by the USB 2.0 ports on my iMac.

BELKIN usb wireless FSD9050 device not recognized by IMAC G4 800

Below is a thread from another group that I was advised to post here. If anyone knows of a solution or work around, it is appreciated.
Thanks
Topic : Belkin Not recognizing
This question is not answered. "Helpful" answers available: 2 . "Solved" answers available: 1 .
Reply to this Topic Subscribe to this Topic Back to Topic List
Replies : 14 - Last Post : Nov 30, 2007 6:32 AM by: real_tt
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Belkin Not recognizing
Posted: Sep 19, 2007 9:04 PM
Reply Email
I bought the Belkin Wireless usb Mimo F5D9050 and it worked amazing with my Ibook G3 800Mhz.. but then it started to occasionally not work until i would eject it and reconnect it a few times.. Now no matter how many time si reconnect it it will not work... ive tried to re-install the belkin but still no luck.. and so i plugge dit into my Windows pc and it worked fine... What could this be! im going nuts
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 19, 2007 9:39 PM in response to: JakeHebert
Reply Email
Hi, Jake. Welcome to Apple Discussions.
It's possible that your AirPort card has fizzled out on you. AirPort card failure doesn't happen very often, but it happened to me once, and it was very frustrating.
We diagnosed what was wrong with mine by my husband swapping his AirPort card with mine. Then my iBook would connect, but his wouldn't, so we knew it was the card.
Will the iBook work on any wireless network? Do you have someone with whom you could swap cards to see if that's the problem?
Possible sources for replacing the original AirPort card (links last checked 8/19/07):
http://www.dvwarehouse.com/Apple-Original-AirPort-Wireless-Card-802.11B-p-31366. html
http://www.synaptech.com/catalog/index.php?mainpage=index&cPath=4953
http://www.powerbookguy.com/xcart/catalog/Airport-Cards-price0-p-1-c-507.html
http://www.expercom.com/productdetail.html?PRODUCTID=305851
http://www.macrecycling.com/ibook-g3-c-18.html
http://techrestore.com/xcart/product.php?productid=16174
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Re: Belkin Not recognizing
Posted: Sep 20, 2007 1:40 PM in response to: Ronda Wilson
Reply Email
well. no i have no airport card, and never have had one.. this wirless card is a usb plug-in one and .. it is recognized by every compute ri plug it into except the on ei need it for.. yet the one thats not recognizing it now USED to recopgnize it not even 2 weeks ago!... its realllyy frustrating... i mis susing my ibook lol
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 20, 2007 3:12 PM in response to: JakeHebert
Reply Email
Have you tried using the other USB port? If neither port works, try plugging in a USB mouse to see if it works to confirm that your USB ports aren't damaged.
Have you installed any new software? Maybe a Security Update or something similar? Sometimes that will break functionality of third-party drivers.
You may need to go to the website of the manufacturer of the USB wireless device to see if an updated driver is available.
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Re: Belkin Not recognizing
Posted: Sep 20, 2007 4:11 PM in response to: Ronda Wilson
Reply Email
mmm.. Both usb ports work fine with my wireless mouse... i will have to talk to a tech of Belkin.. but i hate that because i already had to once before... bahh... but i did search for a new updated version of the driver for the ** thing.. but no such luck.. I dont think any new software has been installed though ... i appreciat eyour help though Ronda!
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 20, 2007 5:57 PM in response to: JakeHebert
Reply Email
You're most welcome.
What is the model number of the adapter?
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Re: Belkin Not recognizing
Posted: Sep 20, 2007 6:24 PM in response to: Ronda Wilson
Reply Email
umm its um f5d9050 the 3001 series... its HUGE lol... but it USED to work like a dream.. baah
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 20, 2007 8:10 PM in response to: JakeHebert
Reply Email
When did you buy it, Jake?
There is a driver that was released on June 19, 2007.
http://www.belkin.com/support/article/?lid=en&pid=F5D9050&aid=5925&scid=0
Even if this is the one you have installed, you may want to reinstall it.
Good luck.
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 29, 2007 6:13 PM in response to: JakeHebert
Reply Email
Did this one ever get a real response. Mine is doing the same thing and the machine will not recognise that the usb is even plugged in. Any help is appreciated
Mac OS X (10.5.1)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Nov 29, 2007 6:21 PM in response to: real_tt
Reply Email
Hi, and welcome to Apple Discussions.
Since Jake hasn't posted in over two months, either that driver worked for him, he found the answer elsewhere, or he gave up. Since he hasn't posted back, we have no way of knowing.
What model computer do you have?
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 29, 2007 6:35 PM in response to: Ronda Wilson
Reply Email
I MAC G4 and I have tried every driver listed on the forums with no success
it states to go to the network in system pref. to set up device
there appear to be no way I can figure out how to add the usb device
any help is appreciated
Mac OS X (10.5.1)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Nov 29, 2007 10:29 PM in response to: real_tt
Reply Email
Since you're running Leopard, I surmise that your iMac takes the AirPort Extreme card?
May I ask why you don't just get one of those? As I post this, the Apple Store has a refurbished one for $29.00.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=%2 2extreme+card%22
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 30, 2007 5:52 AM in response to: Ronda Wilson
Reply Email
I am not running Leopard... using 10.4 and I already own the product. It is suppose to work and there is no reason to purchase another unit. All I need to understand is how to make the IMac recognize the USB device or how to configure the unit. Others have stated in this and other forums that they have used this unit with success.
Thanks for address this specific issue.
Since you're running Leopard, I surmise that your iMac takes the AirPort Extreme card?
May I ask why you don't just get one of those? As I post this, the Apple Store has a refurbished one for $29.00.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=%2 2extreme+card%22
Mac OS X (10.5.1)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Nov 30, 2007 6:06 AM in response to: real_tt
Reply Email
Your specifications at the bottom of your post state that you're running Mac OS X 10.5.1?
You may want to post in the Internet and Networking your iMac (Flat Panel) Forum. Maybe someone there can help you out. (You've posted in the iBook G3 Forum.)
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 30, 2007 6:32 AM in response to: Ronda Wilson
Reply Email
I am using a laptop to connect to the internet not the machine that I am writing about. If I could do that I would not need any help. I will check out the other forum but this thread is on topic.
Mac OS X (10.5.1)

The information in your thread references an iBook quite a lot but the title of this post says iMac so I going to assume that you are trying to use this device with an iMac.
It is also unclear what version of the Mac OS you are using.
Let's start by stating the fact that these USB networking networking devices are not inherently supported by the Mac OS. Therefore they need drivers. These drivers are usually fragile and only work with a well defined version (or versions) of the Mac OS. Anytime that you make any upgrade to the Mac you are able to create an incompatibility with the driver and the device.
The Belkin F5D9050 does have some Mac OS drivers available at this link.
You should uninstall/remove the current driver for this device.
Restart your iMac.
Download and install the appropriate driver for the version of Mac OS on your iMac.
Restart your iMac.
If that doesn't work, either get the original AirPort card for the internal wireless slot in the iMac or get an Ethernet wireless adapter. An Ethernet wireless adapter requires no drivers and therefore will work with any Ethernet device.

USB Mass Storage Device - ?

Shuffle shows up as a USB Mass Storage Device under the drive (USB Port) i plug it into.
It will not take an update or reformat.
Wondering if it is possible that the factory format could be erased and now the unit is just being recognized as a storage device and unable to be used in the manner it was originally intended for...MUSIC.?
What does it mean when you get a message "Media in Drive - Changed" ?
Fixed many other ipods in past but only one shuffle so far....now this one has me going...no clue what else i can do to it.
Any help would be appreciated.

i think it was trying to read the shuffle when i wanted to format and restore.
i never did get it to work.
no way of knowing now..i just got through tearing into this one to make one good shuffle out of the two i was working on.
all was good till i went to put the slide bar on/off switch back on....broke the switch again.
do you have a switch?
thanks

What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
I'd frankly get a good external enclosure and buy a bare drive. But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
Grant

What is a good external battery pack for a 13" retina display?

what is a good external battery pack for my 13" retina display(macbook)

Have a look here for the sizes and prices.
It is however, much better to get a USB external drive that comes with it's own power adapter to avoid issues when or if your USB port can't supply enough power to your external drive.
That issue however does happen rarely but it does happen. Especially when connecting other devices to your other USB port while your external hard drive is connected to your other usb port.

What is a good external hard drive for use with a macbook air?

I am looking at purchasing a macbook air 13". What is a good external hard drive to use with it? Should I look for an external hard drive with its own a/c power or is the usb 3.0 capable of powering the external drive.

Have a look here for the sizes and prices.
It is however, much better to get a USB external drive that comes with it's own power adapter to avoid issues when or if your USB port can't supply enough power to your external drive.
That issue however does happen rarely but it does happen. Especially when connecting other devices to your other USB port while your external hard drive is connected to your other usb port.

Good USB-MIDI interface

I can see other posts on this topic but they're from 2007
Can anyone recommend a good USB-MIDI interface… I have an old yamaha electric keyboard (about 15 years old) it has the midi in/out plugs so I assume it will connect okay to the Mac/garageband. I notice on ebay there are similar looking interface devices selling from around USD$6.00 to $40.00 (often it's better to spend more but not always)
That's one question, the other is: will it be likely that I will have to buy a more modern keyboard to work okay with garageband? I should mention that I have zero experience just now with garageband if anyone knows common problems with trying to wire up a keyboard to a mac…
Many thanks
Mark

Thank you Keith, and Hangtime… Once again you will have to forgive my total ignorance about GB to date… once I connect the keyboard I will be able to start playing around…
Keith could you clarify the bit about "do you want midi only, or audio inputs too"…? What form would 'audio inputs' take?
My keyboard has it's own selection of sounds, GB also has it's own collection of sounds. the USB-MIDI interfaces I have seen on bay are mostly just a cable with the 2 midi plugs one end, a usb plug on the other end and a small box in-between. What would "audio inputs" imply. would you normally record a GB audio file with sounds from the keyboard or those of GB. does "audio inputs" imply a 3rd selection of sounds?

Logic and MPC2000 tap tempo feature

Does anyone know how to setup logic pro so that I can emulate the tap tempo feature that the mpc has. I have downloaded the mpc groove templates and have become very skilled at using the Exs24 and Motu mach five samplers. Only feature I'm missing before I sell my mpc is the tap tempo button. For the hiphop stuff I create this feature is needed for hats and weird sounds sometimes.

try going to the matrix editor
set the grid to whatever resolution you want.
use pencil tool to draw in the note that you want
copy/duplicate the note so that all the beat subdivisions are filled (all 1/32 or 1/16 or what ever
delete the notes that you don't want.
using logic arpegiator is a good idea as well
ej

What's a good usb tap tempo device?

Similar Messages

Maybe you are looking for