What's a normal setup for Time Capsule?

I've a 3TB TimeCapsule. I have a new 27 inch iMac. The wireless router (BT Infinity 3 in UK) is in a different room from the computer.
The Time Capsule worked perfectly with my old iMac and Time Machine. However since I migrated to the new computer it's useless.
I now understand the glazed look my mother gets when I try to explain her laptop to her, I'm bafflted how to setup Time Capsule and Time Machine! I don't need a new wireless network as the old one still works. Equally I'm happy to connect the Time Capsule to the iMac via Ethernet cable. There's c. 1TB of info to backup. In frustration I've wiped the TimeCapsule so effectively it's straight out of the box. I thought I had it working over the weekend but it said it was going to take 27 million days!
How to I set it up, I just don't get it!!??
Thanks

If you have 1TB to backup .. you should at least do the first part by ethernet.
So plug the TC into the computer.. start early in the evening and leave it run all night.. and half the next day.. you should be able to get 60GB per hour. Once that is done you can go back to your normal wireless setup.. but you need to likely do this in isolation.. I found having wireless running made it slow.
The TC will be in router mode to do this.. ie as it comes out of the box.. plugged into .. there might be lots of errors but it should work. If it fails do a verify of the data on the hard disk of the imac and see if anything is corrupt.
See A5 http://pondini.org/TM/Troubleshooting.html
Once you complete the backup it is up to you.
Bridge TC and plug into the existing router and just continue over wireless should be fine.

Similar Messages

  • Privacy Setup for Time Capsule

    I have a roommate, and we share Wifi through AT&T Uverse. I recently bought a new Time Capsule which I connected to the router via an ethernet cable, and I am confused as to what the best setup is so that my roommate can not have access to it, as well as backup their own computer on it.
    I don't want to create a new network, as I feel like I will be decreasing the bandwith of the current wifi. But if I add to our exsting network (which i believe extends the signal), don't they have full access to my TC?
    Many thanks in advance!

    I don't want to create a new network, as I feel like I will be decreasing the bandwith of the current wifi. But if I add to our exsting network (which i believe extends the signal), don't they have full access to my TC?
    Many thanks in advance!
    There is no difference in these.. if both are set with wifi on.. then you can use roaming or different network names and passwords but that is exactly the same. From wifi point of view it is not a big deal. The value of the new AC version TC is to provide 5ghz wireless.. whereas the Uverse is only 2.4ghz. Just set the TC to say channel 1 and set the Uverse to channel 11.. all will be fine. Although Auto setting should also work ok.
    So security is either to stop him accessing the wireless, so use a different password.. but if you have correctly bridged the TC to the Uverse then you simply use disk password and don't tell your friend what that is.
    He can then use your wireless from the TC and still not access the hard disk.
    You should also set a different device password to the default.
    If you suffer from paranoia please read this. .otherwise skip it.
    NB.. I always like to point out to people that security on the TC is a reset button away. If your roommate can reach your reset.. all your security is gone the moment he resets your TC.. A hard reset would leave obvious trail ie it lost configation.. although various excuses like the power went out can be given. If he was the sneaky kind.. he can soft reset.. and he then has 5min access to all your info on the TC.. and you have no idea when you come back that any breach was made.. since you cannot access logs or anything in the new TC. No warning message will tell you except during the access that soft reset has been used.
    If you have something you want to keep secret.. the TC is NOT the place to store it, without using encrypted files.

  • Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

    Just bought a 3TB Time Capsule for a small office. Will have 4 users with MacBooks. What would ne the best setup for time machine individual backups and internet sharing in a secure way?

    Set up each Mac for Time Machine backups in the normal way.  Time Machine will keep each backup separate on the Time Capsule, so users will only be able to see the backups of their own Mac.
    Yes....there are convoluted workarounds that might allow one user to see the backups of another.....IF...they know the administrator password of the "other" Mac.
    As far as Internet sharing, all users will have access to the Internet if they have a wired or wireless connection. If a Mac connects using wireless, it is possible to limit the time that they are allowed to connect to the network.
    For example, you might limit the ability to connect to the wireless from say each Weekday from 8 AM to 6 PM.
    With a wired Ethernet connection, you cannot limit access times to the Internet.

  • HT1175 I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

    I am trying to setup my Time capsule via a ethernet cable as a back up for a new iMac. The on button on the time capsule set up window keeps failing to stay on. Any ideas what to do?

    A PC can have more issues connecting than a Mac.
    But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
    If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
    Important thing is to get access to the TC.
    The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
    http://support.apple.com/kb/DL1482

  • Trying to connect Airport time capsule to my leopard iOS mac.  Downloaded software for time capsule for snow leapard/leopard but still says I need more software.  What do I need?

    Trying to connect Airport time capsule to my leopard iOS mac.  Downloaded software for time capsule for snow leapard/leopard but still says I need more software.  What do I need? I have a 10.5.7 iOS (Leopard).  It connects to wifi at speeds in the airport and has plenty of storage capacity and memory.

    If your Time Capsule looks like this..
    Please review the System Requirements to set up and administer the device.....
    Setup and Administration
    iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
    Mac with OS X Lion v10.7.5 or later and Airport Utility 6.3 or higher
    http://www.apple.com/airport-time-capsule/specs

  • What type of modem do i need for time capsule. I can't get it to pick up the net

    what type of modem do i need for time capsule. I can't get it to pick up the net

    Simply bridge the TC..
    With DSL you need to either bridge the modem and use PPPoE client which can be difficult to setup.. especially as some modems do not bridge readily..
    Or bridge the TC which is simple.. go to the airport utility and select internet page, on v5 utility or network page on v6 utility and select off-bridged mode for the mode of connection.

  • While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    While trying to setup a time capsule backup to my MyBookLive external drive, I got the following error message: The network backup disk does not support the required AFP features. What's up with this?

    This means that your NAS does not support the required encryption. Update your NAS to the latest firmware or ditch it and buy a Time Capsule (they are the most reliable when using TM).

  • What is a maximum remoteness between time capsule and device for having a good wifi signal?

    What is a maximum remoteness between time capsule and device for having a good wifi signal?

    In open air.. line of sight you should work very well over 100M and most likely still work at 200M.
    Unfortunately in houses.. there is almost no way to tell. But you can assume signal on 5ghz will dimish very rapidly.. 2 or 3 walls/floors/major obstacles and nothing left.. 2.4ghz should manage your whole house but you might find signal in far corners unusable.  Count the number of walls, floors/ceilings it is going through in a straight path, router to client. You can think of it as a 4" pipe.. and even the angles are important.. if it hits a wall made of brick at acute angle it is twice as thick as hitting it dead on. Mirrors, tinted glass are metal reflectors.. reinforced concrete is both a reflector with metal bars and absorber with concrete.. add a bit of moisture content and it is a great block.

  • How to setup apple time capsule with FIOSinternet and VZ router?)

    Hello,
    I have Apple time capsule and the VZ Router MI424WR. I current set up:
    1. VZ router - wireless off, the rest is standard
    2. Time capsule: Wireless on in Bridge mode
    Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
    I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
    Please, is there a good and complete description to solve that issue?
    Thanks in advance
    Moebius

    Go back to your first setup ...
    Verizon router with wireless turned off
    Apple Time Casule with wireless turned on
    Method 1:
    With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
    If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
    Method 2:
    This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.  
    With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule.  You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side.  Now, connection the WAN port to one of the Verizon router LAN ports.  If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
    Method 3:
    This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
    There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
    If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

  • Are there any firmaware updates for time capsule?

    Are there any firmware updates for Time Capsule/Time machine?
    I just had a new hybrid (SSD and spinning disk) drive (750 GB) installed on my MacBook Pro and used Boot Kamp to partition it and run Windows xp. Now, my previously working Time Machine won't function. It says the "sparsebundle" is open (or in use)  preventing the back-up from working properly. When I try and remove and re-install Time Capsule as the disk to back-up to, it still doesn't work. My plan "B" is get a second Time Capsule and dedicate it to the MacBook. But, I fear I'll face the same problem.
    When I open to reconfigure Time Machine, the Time Capsule disk is identified as the back-up, but it's also seen in the "available disks to use for back-up" along with with Boot Kamp disk which is part of the new SSD hybrid hard drive just installed. (Remember it's the partitioned part running Windows xp.)
    I've unplugged/plugged-in the ethernet internet connection and the power cord many times to no avail. The message still says the sparsebundle is in the way.
    Do you think deleting Boot Kamp disk from the list of available hard drives might solve the problem?
    Bill in Tulsa

    TM can only use AFP and only on disks formatted HFS+ (ie Mac Extended Journaled) so it should not bring up a boot camp partition as a possible destination at all .. but I have not done that seutp.
    It says the "sparsebundle" is open (or in use)
    That error is well known. It should simply required the TC to be restarted..
    That sometimes gets things working where the simple restart won't.
    I would recommend using short names, with no spaces and pure alphanumeric. 
    That is C9
    http://pondini.org/TM/Troubleshooting.html
    If you have a more complicated setup.. I would recommend firstly doing a TM reset in the computer.
    See A4 in the same reference.
    Do a verify then of the sparsebundle on the TC.. A5 but you might need to inherit the old backup if you want to continue an old backup.. A new hard disk will make the TM consider the old backup no longer belongs to the computer.. there is a UUID connection to the actual hard disk used in the backup.
    Again read the info in pondini. B5 and B6.
    The sparsebundle in use is C12 but there are a number of sparsebundle issues in section C.. C17 is another common issue.
    Some of what you have done is not adequate.. eg disconnecting ethernet is not enough.. you need to reboot the TC.

  • How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

    How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

    Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
    There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
    Is it tall like this.
    Then it is Gen5.
    otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
    Open the Airport utility and give us a screenshot of the summary page.
    That will also help us determine that you have the TC, which version and how it is setup.
    You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
    I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
    You do not do anything in the TC.. set it up in the Ubee router.
    Port forward 548 to the TC in the Ubee router.
    And make sure the TC has a static IP in the Ubee router.
    Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
    You are fighting hard because Apple made this hard.. not easy.

  • How do i install firmware updates for time capsule?

    How do I install firmware updates for time capsule?

    If you are using the Lion or Mountain Lion operating system on your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon
    A message will be displayed if there are any available updates. Click to update if that is the case.
    If you are using the Leopard or Snow Leopard operating system......
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click on the Time Capsule icon, the click Manual Setup
    Click on the word Version (3rd line on the page) and any available updates will be displayed. Click on Update to proceed.

  • I have replaced my old Mac Mini with new one.  What should I do about my Time Capsule?

    With the old Mac Mini (2009 model) I used Time Machine and a Time Capsule to back up everything on the Mac Mini itself and on external hard drive I added when I needed more storage space.  I've replaced the old Mac Mini with a 2011 model, and migrated the contents of the old one to the new one from Time Machine. 
    I'm now trying to figure out what I should do to my Time Capsule and/or Time Machine to make backups going forward of the same content, now on my new Mac Mini and same external hard drive. 
    When I go into Time Machine, it does not seem to recognise the items on the external hard drive as ones that I can backup (or not, as there were some items there that I did not and do not wish to backup to Time Capsule) through the new Mac Mini. 
    I am uncertain too whether the Time Machine/Time Capsule will recognise the items of my old Mac Mini as the same ones that are now on my new Mac Mini and save changes there, or whether it will try to save all over again all the same items, as they are now on a different computer. 
    My inclination is to clear out the contents of the Time Capsule now and start all over again.
    I have looked through information provided by Apple but not found answers to my questions.

    The situation concerning the hard drive is complicated.  It is not included in the list of Excluded Items.
    If the drive is not "Excluded", then it must be included.  That is the way that Apple's software works.
    But, nor am I given the option to select it or any of the items in it for adding to the list of Excluded Items.
    If you want to add an item to the list of Excluded items, click the + button at the bottom of the Excluded list, then navigate to select the drive to add it. Once the drive has been added, you can go back in and select the items.
    When I go into the exclude from backup area and select the hard drive, it and the items in it appear in dimmed form, but I cannot select them.
    Sorry, I do not understand what you are trying to say here.
    What I want to do, but cannot, is what I did before, select one of the items in it not to be backed up and leave the rest to be backed up
    I have no idea how you were able to do this. As long as I can remember, Time Machine will not allow you to pick and choose items on a drive to be backed up or excluded. Your option is to have the entire drive backed up, or the entire drive to not be backed up.
    have not seen the 'Quick Erase' option.
    You would use AirPort Utility to erase the Time Capsule drive. Open AirPort Utillty and click the Disks tab at the top of the screen. Then, click Erase Disk.  The Quick Erase option will appear.

  • Configure syslog for Time Capsule

    I have seen some items on this in the forums, but to be honest..I would this would be pretty simple to find somewhere, but none of what I see seems to work, plus like 2 - 3 years old...whats up with that?
    Can someone give me instructions for setting up syslog config for Time Capsule, going to the latest Apple Mini
    Thanks, Joshua

    This Apple article may not give you the whole story, but it may help.  One thing it doesn't seem to do is tell you where to find that information on the Mac that's receiving the Syslog information.  Since you know enough about that to ask, I'll hope that you already know that.

  • Where Can I redownload the program that allows me to setup my time capsule.

    I recently replaced my old computer that had the setup program. My time capsule worked fine until I had to reset it because of connection issues. Now I have no way to setup my Time Capsule because I don't have the program.
    Thanks.

    Just download the airport utility for windows..
    http://support.apple.com/kb/DL1391

Maybe you are looking for