What's difference between iphone 4 and 4s?

i bought an iphone 4 9months ago and the software was upgraded to iOS5 last month. since then i noticed that by the time i used to connect my iphone into my pc the itunes did not sync so i'd just tolerate as not a big deal for me... this is the problem that i have. yesterday evening, my iphone 4 was connected to my pc at the same downloading viber again from itunes at the moment i wanted to disconnect my iphone its dead! shut it off. i kept on switching evry10sec but there was no power. i knew there's enough battery as it connected in my pc. well, i gave up and leave it but 36hrs after when i'd tried again to switch on i saw on the lcd battery icon is red So i've charged immediately. now fine! i just want to share with you this experience... why its like this. Thanks there.

what's difference between iphone 4 and 4s?
Go here and see what's new:  http://www.apple.com/iphone/

Similar Messages

  • What are the differences between iphone and iphone 5c 5s?

    What are the differences between iphone and iphone 5c 5s?

    Read here:
    http://www.apple.com/iphone/compare/
    The iPhone 5C is basically the original iPhone 5 in different colors.
    While the 5S gets the improved hardware.
    Read the link above for a feature comparison.

  • What is difference between modify and update i am using

    hi
    what is difference between mofify and update
    my requiremen is to have three condition checkec while mofifying or updating from a internal table
    the three fields are
    cus no
    status
    date these all are primary key in the database table
    so which sould i use modify or update
    there might be entry already existing in database table or new entry to be created if already existin it should check on the primary keys and updatat if not it should add a record
    pls suggest whihc to use and how to implement the check on teh threee primary key
    like if modify ztable from table it_test
    now where condition ? can be used or not with modify? and if yes how
    if not should i use update will update create a new entry if no entry is there and please give syntex
    regards
    Arora

    Hi Nishant Arora,
    Modify: It works in performing two actions.
    They are: Insert + Update.
    For Example If a record that is exited in database, so you are modifying that record, it updates that particular record.
    Similarly, If the is not existed in the database, you are modifying it, it inserts a new record.
    Update: Update means just it updates the status, I mean it only updates the record. It doesn't inserts any new record if that particular record is not present in the database.
    These are the cases you need to write these statements.
    Syntaxes: :
    Go through this links please.,
    http://help.sap.com/saphelp_nw04/helpdata/en/e7/968aa8b2384dd9835f91e7f8470064/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/fc/eb35eb358411d1829f0000e829fbfe/content.htm
    Reward points if useful
    Cheers,
    Swamy Kunche
    Edited by: Swamy Kunche on Jun 11, 2008 2:41 PM

  • What is Difference between SXMB_MONI and SXMB_MONITOR?

    what is Difference between SXMB_MONI and SXMB_MONITOR?
    Can any explain to this question.please?

    Hello,
    Both are same.
    SXMB_MONI is area menu which will contain all multiple transactions pertaining to monitoring.
    SXMB_MONI contains some functions viz monitoring for Bridging, Archived Msgs, Job overview, persistence layer analysis.
    SXI_monitor directly leads to the message monitoring for the IS, which is part of the SXMB_MONI.
    SXI_MONITOR directly executes the monitoring report.
    Thanks,
    Satya

  • Whats the difference between list and lov ?

    Whats the difference between list and lov ?
    i can do the same things with a list what an lov can do .
    infact a list is more better. cause the list doesnt hold/show a range of values, and only has the items value iteself.
    while the lov can get all the values of items depending on the query.
    like
    select ename, job, sal from emp
    will show all the three items values in lov?

    Also, if you're looking in the US store, the prices are:
    - Airport Express (small, no ac) $99 - Has audio out for speaker connection using Airplay. Can share a USB printer only.
    - Airport Extreme (larger, ac) $199 - No audio out, can share a USB printer or hard drive.
    - Time Capsules (2TB, 3TB at $299, $399) - have ac wireless and a backup hard drive for Time Machine which the other Airports do not have.
    Matt

  • Whats the difference between Fatal1ty and Fatal1ty USB heads

    Whats the difference between Fatal1ty and Fatal1ty USB headset? What is the $30 price difference for other than a USB connection?
    Also, what is the advantage to using the USB port?
    Still trying to decide on which headset to buy. I will be using these mainly for gaming and some music. Although i'm not real picky when it comes to music quality. Even considered the HS-1200 wireless. Which headset of these 3 has the best sound quality and better quality?
    Message Edited by iowabucks on 10-20-2008 07:54 AM
    Message Edited by iowabucks on 10-20-2008 08:10 AM

    Any USB sound related item is going to use system resources instead of the non usb version. The non usb version uses the resources of the sound card and not system resources. So you should get cleaner sound with the non usb version.
    But, be aware creatives tech support is not the best in the world. Keep that in mind when buying a product from them.

  • Whats the difference  between Authentication and Login check up ?

    whats the difference between Authentication and Login check up ?

    Authentification is a more generic term. It's generally applicable to any situation where you check that information comes from where it claims to come from.
    Login is just one form of authentification.

  • Whats the difference between comparable and comparator?

    whats the difference between comparable and comparator?
    when must i use comparable, and when must i use comparator?

    whats the difference between comparable and
    comparator?Comparable is from the java.lang package, Comparator from java.util.
    when must i use comparable, and when must i use
    comparator?Here's a tutorial on both:
    http://java.sun.com/docs/books/tutorial/collections/interfaces/order.html

  • Whats the difference between oracle9i and oracle10g

    whats the difference between oracle9i and oracle10g?

    794244 wrote:
    whats the difference between oracle9i and oracle10g?About 12...
    SQL> select utl_match.jaro_winkler_similarity('oracle9i','oracle9i') as sameness from dual;
      SAMENESS
           100
    SQL> select utl_match.jaro_winkler_similarity('oracle9i','oracle10g') as sameness from dual;
      SAMENESS
            88
    SQL>

  • What's differences between jaas and jacc?

    lately i saw a new java scurity released on http://java.sun.com/j2ee/javaacc/; it seems like similar to JAAS (http://java.sun.com/products/jaas/); though, reportedly, jacc concerned more detail in authrization, however, there's autherization api been included as i know. is there anyone be able to tell me what's differences between jaas and jacc? or where there's resource or article exaplained detail about this issue?
    i appreciate any suggestions.
    thank you very much,

    From what I saw, the JACC specifically deals with what is currently called Container Managed Security. JAAS is something that would be used on top of JACC.
    See also:
    http://java.sun.com/j2ee/1.4/docs/tutorial/doc/Security11.html
    JACC contracts provide the following benefits:
    - JACC moves security administration and decision-making responsibility from the container to the security providers.
    - JACC enables the use of a common policy across different security systems.
    - J2EE system integrators can integrate containers with existing authorization policy infrastructure
    re Jaap

  • HT201471 Sorry can you explain what is difference between cellular and cellular (MM)

    Sorry can you explain what is difference between cellular and cellular (MM)

    The MM or Millenium Media according to what I can find, refers to the CDMA variation of the Cellular iPad for Verizon Networks.
    The non MM version is for GSM carriers like AT&T.

  • Whats the difference between ALL and FIRST  in Multi Inserting

    SQL> Drop Table Sales;
    Table dropped.
    SQL> Drop Table Accounts;
    Table dropped.
    SQL> Drop Table Research;
    Table dropped.
    SQL> Create Table Sales As Select * From Emp;
    Table created.
    SQL> Create Table Accounts As Select * From Emp;
    Table created.
    SQL> Create Table Research As Select * From Emp;
    Table created.
    SQL> Truncate Table Sales;
    Table truncated.
    SQL> Truncate Table Accounts;
    Table truncated.
    SQL> Truncate Table Research;
    Table truncated.
    SQL> Select * From Sales;
    no rows selected
    SQL> Select * From Accounts;
    no rows selected
    SQL> Select * From Research;
    no rows selected
    SQL> Insert All
      2  When Deptno=10 Then
      3  Into Sales (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
      4  When Deptno=20 Then
      5  Into Accounts (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
      6  When Deptno=30 Then
      7  Into Research (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
      8  Select * From Emp
      9  .
    SQL> /
    16 rows created.
    SQL> Select * From Sales;
        EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
         7782 CLARK      MANAGER        7839 09-JUN-81       100                  10
         7839 KING       PRESIDENT           17-NOV-81       100                  10
         7934 MILLER     CLERK          7782 23-JAN-82       100                  10
         7999 ABCDEFGH   JOB            7839 09-FEB-06       100         0        10
    4 rows selected.
    SQL> Select * From Accounts;
        EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
         7901 SMITH      CLERK          7902 17-DEC-80       100                  20
         7566 JONES      MANAGER        7839 02-APR-81       100                  20
         7788 SCOTT      ANALYST        7566 19-APR-87       100                  20
         7876 ADAMS      CLERK          7788 23-MAY-87       100                  20
         7902 FORD       ANALYST        7566 03-DEC-81       100                  20
          123                                                                     20
    6 rows selected.
    SQL> Select * From Research;
        EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
         7499 ALLEN      SALESMAN       7698 20-FEB-81       100       300        30
         7521 WARD       SALESMAN       7698 22-FEB-81       100       500        30
         7654 MARTIN     SALESMAN       7698 28-SEP-81       100      1400        30
         7698 BLAKE      MANAGER        7839 01-MAY-81       100                  30
         7844 TURNER     SALESMAN       7698 08-SEP-81       100         0        30
         7900 JAMES      MANAGER        7698 03-DEC-81       100                  30
    6 rows selected.
    SQL> Truncate Table Sales;
    Table truncated.
    SQL> Truncate Table Accounts;
    Table truncated.
    SQL> Truncate Table Research;
    Table truncated.
    SQL> Insert First
      2  When Deptno=10 Then
      3  Into Sales (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
      4  When Deptno=20 Then
      5  Into Accounts (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
      6  When Deptno=30 Then
      7  Into Research (Empno,Ename,Job,Mgr,Hiredate,Sal,Comm,DeptNo)
      8  Select * From Emp
      9  /
    16 rows created.
    SQL> Select * From Sales;
        EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
         7782 CLARK      MANAGER        7839 09-JUN-81       100                  10
         7839 KING       PRESIDENT           17-NOV-81       100                  10
         7934 MILLER     CLERK          7782 23-JAN-82       100                  10
         7999 ABCDEFGH   JOB            7839 09-FEB-06       100         0        10
    4 rows selected.
    SQL> Select * From Accounts;
        EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
         7901 SMITH      CLERK          7902 17-DEC-80       100                  20
         7566 JONES      MANAGER        7839 02-APR-81       100                  20
         7788 SCOTT      ANALYST        7566 19-APR-87       100                  20
         7876 ADAMS      CLERK          7788 23-MAY-87       100                  20
         7902 FORD       ANALYST        7566 03-DEC-81       100                  20
          123                                                                     20
    6 rows selected.
    SQL> Select * From Research;
        EMPNO ENAME      JOB             MGR HIREDATE        SAL      COMM    DEPTNO
         7499 ALLEN      SALESMAN       7698 20-FEB-81       100       300        30
         7521 WARD       SALESMAN       7698 22-FEB-81       100       500        30
         7654 MARTIN     SALESMAN       7698 28-SEP-81       100      1400        30
         7698 BLAKE      MANAGER        7839 01-MAY-81       100                  30
         7844 TURNER     SALESMAN       7698 08-SEP-81       100         0        30
         7900 JAMES      MANAGER        7698 03-DEC-81       100                  30
    6 rows selected.Both inserting insert the same records then whats the difference between ALL and FIRST clause in multi insert DML
    Khurram Siddiqui
    [email protected]

    Hello
    From the docs:
    ALL
    If you specify ALL, then Oracle evaluates each WHEN clause regardless of the results of the evaluation of any other WHEN clause. For each WHEN clause whose condition evaluates to true, Oracle executes the corresponding INTO clause list.
    FIRST
    If you specify FIRST, then Oracle evaluates each WHEN clause in the order in which it appears in the statement. For the first WHEN clause that evaluates to true, Oracle executes the corresponding INTO clause and skips subsequent WHEN clauses for the given row.
    ELSE clause
    For a given row, if no WHEN clause evaluates to true:
    * If you have specified an ELSE clause, then Oracle executes the INTO clause list associated with the ELSE clause.
    * If you did not specify an else clause, then Oracle takes no action for that row.
    See Also:
    "Multitable Inserts: Examples"
    Restrictions on Multitable Inserts
    * You can perform multitable inserts only on tables, not on views or materialized views.
    * You cannot perform a multitable insert into a remote table.
    * You cannot specify a table collection expression when performing a multitable insert.
    * In a multitable insert, all of the insert_into_clauses cannot combine to specify more than 999 target columns.
    * Multitable inserts are not parallelized in a Real Application Clusters environment, or if any target table is index organized, or if any target table has a bitmap index defined on it.
    * Plan stability is not supported for multitable insert statements.
    * The subquery of the multitable insert statement cannot use a sequence.
    So given this the following example shows the difference:
    SQL> CREATE TABLE dt_test_insert_base as select rownum id from dba_objects where rownum <=20
      2  /
    Table created.
    SQL> CREATE TABLE dt_test_insert_1 (id number)
      2  /
    Table created.
    SQL> CREATE TABLE dt_test_insert_2 (id number)
      2  /
    Table created.
    SQL>
    SQL> INSERT ALL
      2     WHEN rownum <=15 THEN
      3             INTO dt_test_insert_1 (id)
      4     WHEN rownum >=10 THEN
      5             INTO dt_test_insert_2 (id)
      6  SELECT
      7     ID
      8  FROM
      9     dt_test_insert_base
    10  /
    26 rows created.
    SQL>
    SQL> SELECT * from dt_test_insert_1
      2  /
            ID
             1
             2
             3
             4
             5
             6
             7
             8
             9
            10
            11
            12
            13
            14
            15
    15 rows selected.
    SQL> SELECT * from dt_test_insert_2
      2  /
            ID
            10
            11
            12
            13
            14
            15
            16
            17
            18
            19
            20
    11 rows selected.
    SQL>
    SQL> TRUNCATE TABLE dt_test_insert_1
      2  /
    Table truncated.
    SQL> TRUNCATE TABLE dt_test_insert_2
      2  /
    Table truncated.
    SQL>
    SQL> INSERT FIRST
      2     WHEN rownum <=15 THEN
      3             INTO dt_test_insert_1 (id)
      4     WHEN rownum >=10 THEN --This condition is ignored until the value of id is > 15
      5             INTO dt_test_insert_2 (id)
      6  SELECT
      7     ID
      8  FROM
      9     dt_test_insert_base
    10  /
    20 rows created.
    SQL> SELECT * from dt_test_insert_1
      2  /
            ID
             1
             2
             3
             4
             5
             6
             7
             8
             9
            10
            11
            12
            13
            14
            15
    15 rows selected.
    SQL> SELECT * from dt_test_insert_2
      2  /
            ID
            16
            17
            18
            19
            20HTH
    David

  • Please what the difference between MFP1132 AND MFP1136 LASERJET PRINTER

    please what the difference between MFP1132 AND MFP1136 LASERJET PRINTER

    Nothing definite, but http://mindmachine.co.uk/products/HP_Texts/HP_LJ_Pro_M1130_01.html suggests that:
    The MFP1132 (part number CE847A) is for  American and European markets, and uses the CE285A toner cartidge.
    The MFP1136 (part number CE849A) is for  Asian markets, and uses the CE388A toner cartidge.

  • Whats the Difference Between BOM and Components??

    Hi all,
    I tried to create a SubContracting PO,i found BOM and Components in Item <b>Tab</b>
    but if i click components and BOM same data details exists,then whats the difference between component and BOM??
    and also Pls give me method of Creating PO with BOM
    Thanks a lot in advance

    Dear Veeranna Chavadi,
    This is some infirmation about BOM in PO subcontract
    1) The purchasing department processing time defined for the plant
    2) The planned delivery time from the material master record or purchasing info record
    3) The delivery date
    4) The goods receipt processing time from the material master record
    For Ex:
    Processing time Planned del. GR processing
    Purchasing time time
    Release PO Delivery Date
    date date date required
    Date required: 10.09.2007
    GR processing time: 2 days (working days)
    Planned delivery time: 10 days (calendar days)
    Purchasing dept processing time: 2 days (working days)
    Requirement date less GR processing time, planned delivery time, and purchasing department processing time.
    Hope you understand, this is as per the SAP help.
    what happen to u r query, if BOM is exploding please close this thread as answered
    Hope this helps you
    Prem.

  • Whats  basic difference between data and types while declearing the itab

    whats  basic difference between data and types while declearing the internal tables...
    DATA : BEGIN OF t_vbap OCCURS 0,
    vbeln1 LIKE vbap-vbeln,
    posnr LIKE vbap-posnr,
    kwmeng LIKE vbap-kwmeng,
    netpr LIKE vbap-netpr,
    netwr LIKE vbap-netwr,
    werks LIKE vbap-werks,
    matnr LIKE vbap-matnr,
    arktx LIKE vbap-arktx,
       END OF t_vbap.
    vs
       TYPES : BEGIN OF t_vbap,
    vbeln1 LIKE vbap-vbeln,
    posnr LIKE vbap-posnr,
    kwmeng LIKE vbap-kwmeng,
    netpr LIKE vbap-netpr,
    netwr LIKE vbap-netwr,
    werks LIKE vbap-werks,
    matnr LIKE vbap-matnr,
    arktx LIKE vbap-arktx,
       END OF t_vbap.
    and vs
      TYPES : BEGIN OF t_vbap,
    vbeln1 LIKE vbeln,
    posnr LIKE posnr,
    kwmeng LIKE kwmeng,
    netpr LIKE netpr,
    netwr LIKE netwr,
    werks LIKE werks,
    matnr LIKE matnr,
    arktx LIKE arktx,
       END OF t_vbap.

    hi,
    like -> used for refering existing data elements in data dictionary or in sap
    type -> used for refering existing data types in sap.
    types: used for creating used defined structure of tables which has fields from more tahn one table.
    diff b/w types and type in creation of internal tables is that when u create a table with types then u can use same for work area creation also.
    ex:
    TYPES : BEGIN OF t_vbap,
    vbeln1 LIKE vbeln,
    posnr LIKE posnr,
    kwmeng LIKE kwmeng,
    netpr LIKE netpr,
    netwr LIKE netwr,
    werks LIKE werks,
    matnr LIKE matnr,
    arktx LIKE arktx,
    END OF t_vbap.
    data: itab1 type t_vbap
            wa_itab1 type t_vbap.
    when type is used then u have to create a defintion of work area for another time when internal table doesnt have headr line as
    ex:
    DATA : BEGIN OF t_vbap OCCURS 0,
    vbeln1 LIKE vbap-vbeln,
    posnr LIKE vbap-posnr,
    kwmeng LIKE vbap-kwmeng,
    netpr LIKE vbap-netpr,
    netwr LIKE vbap-netwr,
    werks LIKE vbap-werks,
    matnr LIKE vbap-matnr,
    arktx LIKE vbap-arktx,
    END OF t_vbap.
    DATA : BEGIN OF wa_vbap,
    vbeln1 LIKE vbap-vbeln,
    posnr LIKE vbap-posnr,
    kwmeng LIKE vbap-kwmeng,
    netpr LIKE vbap-netpr,
    netwr LIKE vbap-netwr,
    werks LIKE vbap-werks,
    matnr LIKE vbap-matnr,
    arktx LIKE vbap-arktx,
    END OF wa_vbap.
    if helpful reward soem points.
    with regards,
    suresh.

Maybe you are looking for

  • Regarding which is better

    Hi to all iam santhosh kumar .i have compleated ABAP/4 now i want to learn other module either BW or XI some r saying learn XI,but some r  saying learn BW. which is better iam unable to decide which i choose.actually iam B.Tech 2007 passed out.and te

  • Solaris 10 sconadm registration fails - InvalidAssetException

    Hello, I'm having the same problem that many others seem to be having with registering a system for the first time. Sparc system running solaris 10 I have tried the following procedures to no avail. I can log into updates.sun.com with my username and

  • How to create line indesign sdk?

    hi,    I had created line but i cannot able to set length for this line,pls help me. here my code is, UIDRef lineRef=Utils<IPathUtils>()->CreateLineSpline (spreadLayerUIDRef,points,INewPageItemCmdData::kDefaultGraphicAttributes,kTrue,Transform:: Inne

  • I've set m4v files to "always ask" but it opens in the browser player anyway

    Since one of the latest version, Firefox now has a built-in player for certain flash based videos, like m4v. Now, when I try to download such videos (by copy-pasting the direct url to the file into the url bar) it will just open that video in the pla

  • What Driver name/class and url are to be provided?

    I have created a new alias for jdbc in the portal along with the user-mapping...........as a result i can see jdbc system in the system drop-down box.............but i m having some problem while making the connection with portal as it is asking for