What's going on: jim.marion double login in the Forum
Folks and jim.marion,
Hello. It's July 31, 2013 today. It's Wednesday today.
About half an hour ago, I replied to jim.marion in my thread https://forums.oracle.com/thread/2561843 whose title is "Install PeopleTools 8.53 with Linux Issue: Client Windows and Server Linux".
I have been login in the Forum but when replied to jim.marion, a message box came up after his name: you are no longer login, please "login".
I click the "login" button and enter my account name and password in a rush to reply to jim.marion. I think this login is not neccessary ! I assume jim.marion has stealed my account name and password !
My questions are:
First, please ask jim.marion to explain what's going on ? !
Second, if jim.marion got my account name and password, please don't abuse my account name and password !
Third, how to change account password ? Does any folk confront the same issue ?
Thanks.
I have been trying to think of something witty to say on my behalf, but figured I better stop thinking and just reply to say, no, I haven't been logged in as you. At this time I have no desire to change my persona, but maybe you can change that by telling me a little about yourself? Do you have a yacht? How many homes do you own? Vacation condos? I could probably be persuaded to change me to be someone else... I'd have to think about it though.
Now, what is it that makes you think jim.marion stole your credentials? Did you see posts you didn't write? Are you basing your accusation strictly on the fact that you were logged out when trying to reply to jim.marion? I read your post a couple of times, and that is all it says: you tried to reply to jim.marion and the forum told you that you were logged out. I'm not sure that is enough to convict jim.marion. Perhaps you were trying to log in as jim.marion? Perhaps I should be accusing you? Just kidding, of course. Honestly, I don't mind if you answer a few questions on the forum as me because I will get the points.
I'm pretty sure that your OTN forum account is tied to all other oracle.com accounts, including MyO support, OTN, OpenWorld, etc, so change your password at any of these locations and it should propagate.
Do you have any more details? Not that I can fix any of it. I am just curious as to why you think someone has your credentials.
Similar Messages
-
I am using an apple TV to show a slide show which is sent via WiFi from a mini computer. The slide show repeats for a few hours and then stops and shows "no signal". What's going on… and how do I get the show to cycle indefinitely? (I have set the server to NEVER sleep)
Welcome to the Apple Community.
Have you also set the Apple TV not to sleep. -
Ihave iphone5c. Does not permanently delete emails showing in inbox. When they are move to Trash then inbox at first shows empty. However if you leave Mailbox and return then all the emails that were previously deleted and now repopulated in Inbox. I have tried various things like marking them "read" before deleting, then moving them to Trash, and they still return. What is going wrong and how do I fix the problem?
What your describing sounds lot like Nortons anti virus, but other do it to.
Multiple copies of the same email over and over are almost always anti virus incoming mail scanning. Turn off scanning and the problem goes away turn it back on and it resumes.
My guess is that your filter issues, and search problems are also related to this uniquitous and most ignored security tool that messes up far more than it should..
Deleting the index
I assume you mean the global-messages-db.sqlite. if you don't close Thunderbird and delete it now. Searches will be incomplete until it rebuilds and the time to do that will have a lot to do with how much mail there is and how busy the computer is.
Now create an exclusion in your anti virus program for the Thunderbird profile folders. My guess is it is trying to scan the files in your profile every time Thunderbird tries to open them and generally turning things into a tug of war, which Thunderbird looses as it just does not wait around if files are locked. It expects exclusive access to it's files immediately, not in 10 minutes when the anti virus has done it's thing. So things get added to the index but not removed. Mails don't move as the destination or source file is "in use" etc. -
Hey Guys, I have a IMAC G5 and I just uploaded Ilife 08 to it, the problem is, when I create a DVD it sounds good until I burn it. About 1/4 of the way through it the sound stops.. What's going on with it? Is it the encoding proocess?? I'm stumped... Help me out here!
Hi
A. iMovie'08 to 11 are not the tools of choice if one aim to do a DVD as they all discard the quality of the picture by discarding every second line in it. NO way around this due to that it happens between Event's and Project's so as soon as it is being edited - Quality is lost.
B. I use iMovie HD6 or FinalCut
C. if iM'08 to 11 is a must - THEN DO NOT - Share to iDVD - BUT - "Share to Media Browser" and as Large (or ev. Medium)
THEN DO - Save as a DiskImage and see that this plays OK and ALL SOUND
D. if added audio from iTunes - then instead in iTunes - Collect all needed Audio into a NEW PlayList then BURN this as an Audio-CD (.aiff - NOT .mp3 or other) - Then use the Files on this CD in Your Movie Project's (I do)
E. I only use .aiff audio - 48kHz 16-bit (miniDV tape Camera) or 44.1kHz Audio CD - NEVER .mp3 or .wma or other file format - ALL is converted first into .aiff - ALWAYS ! - I have very few problem with Audio in my projects in iMovie or FinalCut !
Yours Bengt W -
Please can someone tell me what is going on when I get this message for the Time Capsule?
Yes, this is because Lion or ML which you are using have lousy networking.
The trick is simply reboot the TC..
Or on Lion use the 5.6 utility and disconnect all users.
For ML sorry.. Apple decided you don't need that function any more!!.
http://pondini.org/TM/Troubleshooting.html
Read C12.. I think C17 is also related. -
WHAT is going on AIM? I keep getting the Auth:ResVLink Error this morning!
I was chatting with my Dad perfectly fine this morning. We wanted to add my sister but I couldn't see that she was available. So I ended our chat and then couldn't get back on because of the AOL error. I can't even log into AIM separately.
Anyone know what is going on?
SunilOK,
There are several parts or stages in making a Video (or Audio) chat connection.
The visible part is sent out and received on port 5678 on the UDP Protocol.
iChat then moves in iChat 3 to port 5060 and contacts the SNATMAP server (run by Apple for iChat) to send the SIP part of the invite and "negotiate" which ports to use.
The Buddy's iChat does the same thing on clicking Accept.
The Server puts the two together on agreed ports and the chats starts the server drops out and you are Peer-to-Peer. (On Ports 16384-16387 normally but 4 from 165384-16403)
In iChat 4 the invite and stuff to the SNATMAP server is on port 16402 as first choice. This is also the single port for Video in and Out and Audio in and Out
(if the port is unavailable, iChat drops one port at a time for 10 ports)
Now some routers and modems have protection features.
DoS (Denial of Service) blocks incoming data in considers is too much too quickly.
SPI (Stateful Packet Inspection makes a judgement if the Data stream is OK.
Both protect you from losing the whole internet connection by stooping that data stream.
In most case these are preset thresholds.
As Internet connections get faster and faster people are bumping into them more often.
A fast Buddy could be seen as sending too much too Quickly
With Leopard/iChat 4 sending all the data on one port there is also a risk that what worked before is now subject to getting cut.
Declining Invitations can be iChat's way of interpreting that the other end suddenly got cut off.
Error 7 almost certainly pints to this problem.
Error 20 (no Data for 10 secs) can also be the same issue if you did not get to see or hear your Buddy.
It is worthwhile checking the modems and routers at both ends as the info above is somewhat generalised.
I hope this helps.
3:17 PM Sunday; December 30, 2007 -
I am loosing several emails from my inbox and from my sent tray on both my imac and my mac book but not from the same accounts on a Windows PC. What is going on here? How can I cure the problem?
What version of OSX?
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk.
Then in Mail, select each Mailbox & Rebuild from the Mailbox menu.
Is this a MobileMe or dot mac account? -
So what now? Will Apple ditch iWeb? They could at least tell us what's going to happen. After all I bought the Macs (2) for my wife so she could make her own websites. If they ditch the app I'll ditch Apple.
iWeb will still function, even after being ditched by Apple, so your wife can continue creating beautiful webpages.
If they ditch the app I'll ditch Apple.
Logic is not everybody's forte. -
in the old forum there was a cookie which uses my login, so that I directly could see in the forum which postings are new and which updated.
Now I have to login each time when I start my browser.
Is this only in my browser a problem or is this the default-behavior now ?
Gerd
Message was edited by:
volbergYes I have seen that answer. I think this is ridiculous.
After all this is a just discussion forum, no high-security online banking or shopping site. No other web forum that I know requires a log in every time I visit it.
If it wasn't for this annoying login I would probably come here more often. -
What's going on with mail, adress book and the iCloud in Mt.Lion?
I am having troubles here since updating to Mt.Lion that are quiet annoying. Mail is not able to read adresses anymore from adress book. Usually if I type in a letter in the adress line, if would show me the adresses starting with this letter. Not anymore... just an annoying spinning wheel.
I remember that I said "YES" when iCloud asked me, if I want to put my adresses in the iCloud right after the update to Mountain Lion. Maybe that was a mistake. But even after putting back all adresses in "local" it doesn't work.
Any ideas? Anyone with same experinces?
Thanks for your help.Here is the latest update from Apple for anyone who is interested:
FWIW, the percentage shown has increased since yesterday.
My totally wild guess is that they are doing some sort of server overhaul ahead of the announcements everyone is waiting for today. All I will say is that I am glad I don't rely on it. -
Hi, all.
Two days ago I was using my computer, a 2011 Macbook Pro, and suddenly got the error message reading "Your Mac OS X startup disk has no more space available for application memory. To avoid problems with your computer, quit any applications you are not using. Closing windows and removing files from your startup disk will also help."
I was only using Google Chrome, nothing was running in the background, and I have 443 of 449.25 GB available (this is after clean-up I conducted after receiving the error message, but probably cleaned up less than 25 GB), so there should be no shortage of space. However, the message kept popping up and I deleted a few files and eventually it went away and hasn't reappeared.
However, last night and then again this morning I have been getting the error message that my USB drive is pulling too much power and has been disable. All that was plugged in was my iPhone 5 on the charger and my computer is also on its charger, so I don't know why this would be an issue, either. I have always charged my phone this way and never had a problem until today.
I haven't been able to charge my phone since. What's going on with my computer?Regarding the USB, see if zapping the PRAM helps.
Regarding your storage space check out the following:
HD Space Checkers:
Disk Inventory X (FREE)
WhatSize (SHAREWARE)
OmniDiskSweeper (FREE)
GrandPerspective (FREE - donation)
Mac Performance Guide
Slimming your hard drive
===============
Quick fix How To Quickly Free Up Hard Drive Space on Mac OS
http://www.youtube.com/watch?v=fO-mlLApEuk -
I have Photoshop CS5 and a Nikon D 810 camera. I have downloaded Camera Raw 8.8 & DNG converter. I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong? Thanks!
This is the last paragraph from my very first response to you, post #1 in this thread:
…Additionally, you need to install the DNG Converter, not just "download" it, and you need to launch it and run it on each folder of NEFs you wish to convert to raw DNGs. [emphasis added] -
I have my yahoo mail as my mail account on my mac mini. While I am reading my emails, I keep having to give my yahoo password and "sign in" every few minutes. What is going on?
Network errors can cause the password dialog.
The correct answer to a Mail.app password dialog is almost always cancel, too. -
I'm getting errors - no drive, no sound - what's going on?
I've been using Tiger for months now with no problems at all, updating the software as necessary but with no other software additions. Yesterday I couldn't burn a CD, I kept getting the error message "error 0X80020025, disk drive not supported" This is the same drive that was factory fitted and has lasted four years so far... it took three attempts before it would recognise a blank CD or burn one, but after that I got the error message again.
today I had no sound on any application, and found that the audio had muted itself.
What's going on? How can I check the operating software, and more importantly repair it without losing everything? The most reliable OS I've ever had... don't want it to foul up now!
HeatherHi, Heather.
1. I'd not panic yet that something is going amiss system-wide. The Mute issue may have simply been due to you accidentally pressing the Mute key on the keyboard.
2. The Error Code 0X80020025 was a known bug in 10.4.1 and earlier, corrected in 10.4.2. However, since you're running 10.4.5, there are some additional issues that can cause this problem. Assuming the burner in question is the factory-installed optical drive that came with your Mac:2.1. Corrupted Finder preferences: See my "Finder Issues? How to delete its preferences" FAQ.
2.2. PRAM or NVRAM issues: see "Macintosh: How to Reset PRAM and NVRAM."
Note that given the age of your Mac, PRAM/NVRAM issues may arise again if the internal battery needs replacement: the internal battery provides an infinitesimal amount of power to retain settings in PRAM:• The replacement battery for your Mac can be found in See "Macintosh Family: Batteries and Part Numbers, Part 2" for replacement battery part numbers.
• The batteries can usually be found in-stock at Radio Shack stores in the US.
• See "Power Mac G4 (QuickSilver 2002): How to Replace The Battery for instructions on replacing the battery."3. As a general checkup for your Mac, consider:3.1. Run the procedure specified in my "Resolving Disk, Permission, and Cache Corruption" FAQ. Perform the steps therein in the order specified.
3.2. Run the Apple Hardware test that came with your Mac. See my "Apple Hardware Test" FAQ for comprehensive advice on using the Apple Hardware Test in troubleshooting, including running the test in Loop Mode.Again, I suspect these are two separate problems, though if the internal battery is due for replacement, it can cause other issues, e.g. clock loses time if not set to a Network Time Server, issues with peripherals such as your optical drive, startup issues, etc.
Note that some of the information above is from the "Burning CDs and DVDs" chapter of my book, Troubleshooting Mac® OS X, Tiger Edition.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
I recently upgraded to windows 8.1. I downloaded elements 7 to new computer and entered my serial number when requested but Adobe says the number they gave me is incorrect. What is going on?
You might be using the wrong number. Try chat for some help:
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )
Maybe you are looking for
-
TP T60 with VISTA and dock doesn't work with DVI
Hi, at the first excuse my English. I am beginner ]:-> I have Lenovo T60 with vista. I have advance dock from lenovo. DVI on dock doesn't work correctly. External display is distort, noisy. After start of Vista is all right. But when I use blank whit
-
Is it possible to resize a digital signature after it has been placed in the document?
-
Interactive Image Panning within a Mask
Hey guys thanks for the help so far. The last piece to the puzzle for me is figuring out how to scroll a movie clip within a mask. I'm currently working with the script taken from the Interactive Image Panning tutorial on kirupa.com as a base. Right
-
Is it possible to get a mac virus?
Hey, I was using a pc and I decided to get a mac, because you can do lots of creative work with it and I was sick of viruses. I was able to clean my pc up after I had a virus and I know how to reprogram it. And I still don't know why I always had a c
-
Components not showing up in Flash CS5
What's the correct way to install components in Flash CS3? first I tried to install the NewGrounds Ad component for AS 3.0 which delivers as an .xmp file. I doubleclicked it and in the Extension Manager it's listed as active under Flash CS5. I restar