What's happened with iCal - all entries duplicated!

What is happening with iCal? Suddenly it's duplicated every event in my calendars on my iMac - and the Mobile Me version seems stuck - I can't click through the days there.
I've seen other posts on this, but I'd like to ask if anyone else has experienced this since "upgrading" their calendars as I was prompted to do yesterday.
Automatic synching is OFF in Mobile Me prefs - my synchs are initiated manually (and I didn't initiate one before the duplication occurred).
Secondly, does anyone know how to remove these duplicates in one go - I can't trawl through 8 years of bloated calendars removing the duplicates!
Thanks.

I can answer my own question about how to remove the duplicates: I unticked/unchecked the calendars in the Mobile Me list in the left column.
I've turned off all synching for the time being - Mobile Me and iCal seem to be causing some severe problems for some unfortunate users who have lost all their data. Makes duplicated data a luxury.

Similar Messages

  • I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square but never downloads.

    I don't understand what's happening with my Music. All the songs that I purchased, that were previously on my phone, now show up with a Cloud next to them, but I can't play them. If I touch the Cloud, it turns into a red square, acts like it's downloading (which I can see happening in iTunes), but never downloads. The Cloud just stays there.
    I've sync'd my phone, I've turned it to "show all music" in Settings, I've drag and dropped the songs/albums onto my phone again. I feel like I've tried everything I've seen recommended, but nothing works.
    I've purchased a lot of music from iTunes. It should be there. What's going on?
    P.S. Same thing happening with my purchased books. Ugh.

    Once you successfully add you iTunes library to iTunes Match, you go to Settings>iTunes & App Store on your iOS device and turn on iTunes Match.  Your iTunes Match library will then appear on your iOS device.

  • Replacing a inner join with for all entries

    Hi Team,
       In a already developed program I am replacing a inner join with select query follow up with for-all-entris and passing the data to final internal table but in both the case the result should be same then only my replacement will be correct. But my no records in both cases differs. This happening because when i am selecting data from first data base table is 32 lines. then I am doing fo-all-entries moving all the duplicate entries then the no records are four. but in final internal table i am looping the first internal table. So in final internal table the no of records are 32. But in inner join query the records are 16.So please let me know how resolve this issue?
    Thanks and REgards
    Deepa

    Hi Thomas,
      Thanks for ur suggestion.
    The solved that in below.
    In select query I did not change anything The way I had written the code was correct.
    I think many of us know how to write that how to make the performance better in that way.
    I made the change when I transfered the to final internal table.
    The original Inner join code:
    select a~field1 a~field2 a~field3 b~field2 b~field3 b~field4
               from dbtab1 as a  inner join dbtab2 as b
              on a~field1 = b~field1 into it_final where
              a~field1 in s_field1. [Field1  in both the table are key field]
    Before code:
    Sort itab1 by key-fields.
    sort itab2 by keyfields.
    loop at itab1 into wa1.
    move: wa1-field1 to wa_final-field1,
               wa1-field2 to wa_final-field2,
               wa1-field3 to wa_final-field3.
    read table itab2 into wa2 witk key field1 = wa1-field1 binary search.
      if sy-subrc = 0.
      move : wa2-field2 to wa_final-field4,
                 wa2-field3 to wa_final-field5,
                 wa2-field4 to wa_final-field6.
    append wa_final to it_final.
    endif.
    Clear : wa1, wa2, wa_final.
    endloop.
    In this case if the one key fieild value is not present there in second internal table but its there in first internal table still it will read that row with 2nd internal values having zeroes. Normally what does not happen in inner join case if the key field value will same in both the case ,then that will fetch only those rows.
    Changed Code
    loop at itab1 into wa1.
    read table itab2 into wa2 witk key field1 = wa1-field1 binary search.
      if sy-subrc = 0.
    move: wa1-field1 to wa_final-field1,
               wa1-field2 to wa_final-field2,
               wa1-field3 to wa_final-field3.
      move : wa2-field2 to wa_final-field4,
                 wa2-field3 to wa_final-field5,
                 wa2-field4 to wa_final-field6.
    append wa_final to it_final.
    endif.
    Clear : wa1, wa2, wa_final.
    endloop.
    In this case the values will read to final internal table if both key field matches.
    With Regards
    Deepa

  • What has happened to iCal in OS X Lion?

    I use iCal for all my events and since upgrading to Lion I have been experiencing majorproblems:
    When double-clicking on an event to open it up, sometimes the event appears for a fraction of a second and disappears.  A further double click is then required to open the event.
    If I use copy and paste to duplicate an event, the pasted event will go to the date where it was copied from not the date where the mouse pointer is located.  If I paste an event into a different month, the event goes to the same date as the original (but in the new month), not the date where the mouse pointer is located.
    I have had problems with events that have disappeared after they have been created on my iMac.  The events can be seen in my MobileMe account, on my MacBook, on my iPhone, on my iPad and even on my PC where I share calendars in Outlook.  But they do not show on the iMac where the event was created.
    I use several calendars, when events are copied and pasted, the original calendar sometimes changes.
    I have noticed that a single click on a date in the month or week view no longer highlights that day.
    None ofthese problems existed with OS X Leopard or Snow Leopard.  What has happened to iCal in OS X Lion?
    Please help.

    https://discussions.apple.com/community/applications/ical

  • What's happening with my 2ndGen AEX at night? Pings sometimes go over 1000ms!

    What's happening with my 2ndGen AEX at night? Pings sometimes go over 1000ms!
    My Airport Extreme is perfect all day but sometimes late at night my ping goes over 1000ms. Wired or Wifi is the same. There's no rhyme or reason as to when it happens either. Random times and random nights (sometimes several nights in a row, other times not for week or more). Resetting doesn't help, but If I go direct to the modem, pings are around 15-30ms... normal for me. It's been a problem for me for a while now, and I'm not sure if its the latest firmware update that did it. I first noticed it playing my Xbox 360 sometime last summer or fall. The ping times will suddenly (usually around midnight or 1am) be so high that I can't play any multiplayer games.  I go to speedtest.net and my ping is anywhere from 500ms to 1118ms is the highest I've seen. If I reset the router, it is fine for a couple minutes and then right back to to the high pings. As I said, the modem is fine when I go direct, so something is causing the Airport Extreme to have trouble. It's not the XB360, cause it also happens with my XB1 and only at night. I play during the day, as well, and have no troubles.
    I believe that there are certain programs that can cause this, like Vuze, but this only ever happens when everyone in the house is in bed, and both mine and my wife's laptops will be asleep.  I do have a Mac Mini connected to another TV in the house, but the only thing it should be doing at that hour is its hourly Time Machine backup to a USB drive plugged directly into it. I do have a network drive attached to the AEX, but I only use that for manual backups for our laptops, neither of which is being done when this occurs. My wife and I also each have an iPad (the 2 and an Air) and an iPhone 5.  Could they somehow be causing this? Maybe an automated iCloud backup occuring at night? Although, I use several devices on my network all day long without this kind of thing happening so I don't know why that would cause this kind of problem. Just to round out my collection, I have to older Airport Expresses as well to extend the network and are mostly used for the audio out.

    Test after each of the following steps that you haven’t already tried:
    Step 1
    Take all the steps suggested in this support article. That's the starting point for any further effort to solve the problem. Skipping any of those steps may mean that the problem won't be solved.
    Step 2
    From the menu bar, select
    System Preferences ▹ Accessibility ▹ Speakable Items: Off
    Step 3
    Reset the SMC.
    Step 4
    Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is much slower to boot and run than normal. Don’t launch any applications at first. If sleep still doesn’t work properly, back up all data and reinstall the OS. After that, if you still have the issue, make a “Genius” appointment at an Apple Store to have the machine tested.
    If sleep now works as expected, go on to the next step.
    Step 5
    Still in safe mode, launch the usual set of applications that are running when you have the problem, including your login items, one at a time, testing after each one. Some applications may not work; skip them. You might be able to identify the cause of the problem this way.
    Step 6
    If sleep is still working after you’ve launched all the usual applications, reboot as usual (not in safe mode) and test again. If sleep still works, you’re done, at least for the moment.
    If you still have the sleep issue after booting out of safe mode, post again.

  • What's happening with BT Broadband Talk??

    When I joined BT some years ago I was advised to use BT Broadband Talk, as this was a VOIP service the calls made via BT Broadband Talk were cheaper than made via a landline (at least that was what they told me when they sold this to me).
    Recently I found out that the call rates for Broadband Talk calls and landline calls are the same, but also that some of my calling plan features do NOT apply to Broadband Talk calls!!
    As I have been using only my Broadband Talk number to make calls, I was just paying for calling plans while they were not being applied on my calls. I don't know when BT all changed this, but it looks to me like they are phasing out the whole BT Broadband Talk service!
    Can anyone let me know what is happening with Broadband Talk???
    (I guess I better use skype anyway...)

    That's indeed what I thought but when I was chatting with a BT support person, this was what she told me (copied from the chat log):
    "Quatta: Can you send me the international calling rates to Netherlands, Spain, Belgium and Germany when calling from the main line vs when calling from the broadband talk line?
       Junaid  : the prices are same if you call from land line or bt talk broadband i will tell you the charges bare with me
    Quatta: Okay thanks - yes please send me the rates
       Junaid  : Netherland-2.50, Spain-2.50, Belgium-2.50 and Germany-2.50 all the amount is 2.50 pence."
    After this i search the bt site to see whether BT BB-Talk had cheaper internatonal rates listed (as i did not trust this chat-reply) but no where on the site you find seperate BT BB-Talk rates for international calls. This chat happened on dec-7, 2011 - that's why i started thinking that BT is making this voip service less attractive so that their existing customers drop out on it and they can terminate it (as they already stopped taking on / promoting BB-talk to new clients). So don't think the cheap calls advantage is there anymore. cheers Rob

  • Alternative for / Problems with: "For all entries in data_package"

    Hi Guys
    I doing some ABAP in a Start Rotine in BW and would like to do the following:
      select * from /BI0/PMATERIAL into table 0mat
      for all entries in DATA_PACKAGE
      where material = DATA_PACKAGE-/bic/zmaterial.
    But I get the following error:
    E:When using the addition "FOR ALL ENTRIES IN itab", the fields "MATERIAL" and "DATA_PACKAGE-/BIC/ZMATERIAL" must have the same type and length. and length.
    ZMATERIAL:
    - Length: 28
    - Type: CHAR - Character String
    ZMATERIAL:
    - Length: 18
    - Type: CHAR - Character String
    According to the error message "For all entries" cannot be used in this case since the lengths are not identical, but is there an alternative way to do what I would like to do?
    Thanks in advance, kind regards,
    Torben

    Hi
    one thing you can try like this define one variable in other itab of same type
    then loop at the first table and assign it to new field and modify the itab
    then use this field with for all entries
    Regards
    Shiva

  • TS1702 Any body know what is happening with this app "eTodo" ? is no more in the iTunes store !

    Any body know what is happening with this app "eTodo" ? is no more in the iTunes store !
    I have this problem for one year I think and no one can’t solve that,I made 6 screen shots and I will uploading in a few seconds all of them and please just check them !
    My problem is: I bought an application last year and after some time I had lost the app from my iTunes store.
    Now,what I want to do is: I want to get that app again,but I could not find anywhere in the iTunes  store,websites ,nobody could not help me with that
    The app has been deleted from everywhere !

    If the app is no longer in the store then you won't be able to redownload it. You don't have a copy of it in your computer's iTunes library or on your backup of your downloads/library so that you can sync it back to your phone ?

  • What is happening with FCP 7 now?

    I've just been engaged to make a film in a remote isolated community.  They want me to set up a 'film studio' for the community at the same time.  Normally this would be a no-brainer for me.  I'd arrive with an Apple Tower, several monitors, some decent speakers, and FCP Studio installed.
    I'm wondering what is happening with FCP these days.  All I've heard is negative rumours about FCP X being an amateur app (iMovie upgraded) and FCP7 being discontinued.  I may not even be able to buy FCP Studio (with 7)?
    I have a distinct disaffection for iMovie ... the underlying logic has always eluded me.  I've been a faithful Final Cut user since the very first version, have cut scores of films with it.
    I'd love to hear the 'latest' news about how Apple is handling this, or not.
    I hate the idea of trying to set up a community studio with any of the alternatives.
    All ears,
    Ben

    Hi Tom,
    By 'current interface' do you mean FCP X?  I haven't had time to try it yet.  I've never liked iMovie.  I love the simplicity and 'logic' of FCP - once one has worked out the most efficient pipeline.
    I find I can show someone how to edit in FCP in about 30 minutes.  It took my son about ten.  And then the learner is on his/her way with great ease.  (I think it's a matter of having myself figured out over the years a very efficient 1,2,3 ... eschewing the 10 other ways to do every operation; I suspect it's the 10 different ways to do each operation that most people find confusing).
    Fogo Island Newfoundland out in the North Atlantic is a particularly enlightened place, quite fascinating.  Very film savvy.  I'd want to set them up with something professional - they might easily turn out some decent filmmakers.  Meaning 'professionals'.
    If Apple was planning to upgrade FCP X to a professional app in the near future (I'm just quoting what I've heard rumoured) then I could see going that way.  I have to confess that I also don't want to have to spend a month getting up to speed on FCP X before heading out for Fogo.  And then looking incompetent when I discover I can't do something on it (that I take for granted in FCP 7).
    All the best Tom.,
    Ben

  • Migration Planning: What will happen with clients when changing namespace?

    Hello,
    We are planning to upgrade our EX2010 enviroment to EX2013.
    Sadly our namespace in EX2010 is right now owa2.domain.com. The name owa2 is coming from last migration between ex2003 and ex2010. I'd like to remove this minor flaw if possible.
    But what will happen with all the clients and mobile devices which are right now bound to owa2.domain.com? Is it possible to change the name back to owa.domain.com without manual interaction with the clients?
    Kind Regards

    Hi ,
    Based on my knowledge for services like pop,imap and active sync we need to have the manual interaction.Without manual intercation we cannot achieve this.
    Same time we need to have the new name on the SAN certificate .
    For owa users you can simply communicate the new url via email and then for internal outlook and external outlook connectivity we need to repair the profiles to force the autodiscover service to fetch up the new name.On my experience most of the times repair
    will not help.So again your only hope would be reconfiguring the existing profiles.
    Note : Most importantly before renaming the host A record on the external and internal dns all you need is to reduce the TTL value for the existing host A record on the name owa2.domain.com.So
    that external and internal clients will not have the dns cache for a long period.
    Anyhow we will wait for some expert inputs on this case.Because their ideas might be good and different than me.
    Thanks & Regards S.Nithyanandham

  • Need to SUM on a  field  with FOR ALL ENTRIES

    Hi All,
       I  need  to  use  something like  this  appearing  below ....but  SUM  is  not  allowed  with  FOR ALL ENTRIES ......Whats   the  efficient  ALTERNATIVE ???
         SELECT  sum( menge )  INTO   TABLE  imseg
                                FROM   mseg
                                FOR ALL ENTRIES IN iresb
                                WHERE  matnr = iresb-matnr
                                  AND  bwart = '281'
                                  AND  aufpl = iresb-aufpl
                                  AND  aplzl = iresb-aplzl.
        Any  help  will  be  rewarded  &  appreciated ...
    Regards
    Jaman

    Hi Karthik,
         Thanx  a   ton....
          How  about   the  below   approach  .....its   allowed  &   working  fine ....also  simplifying  my  work..
              SELECT  matnr  menge  rsnum  rspos
                      INTO  (ws-matnr, ws-menge, ws-rsnum, ws-rspos)
                      FROM   mseg
                      FOR ALL ENTRIES IN iresb
                      WHERE  matnr = iresb-matnr
                        AND  bwart = mvtyp1
                        AND  rsnum = iresb-rsnum
                        AND  rspos = iresb-rspos.
                      imseg2-matnr =  ws-matnr.
                      imseg2-menge =  ws-menge.
                      imseg2-rsnum =  ws-rsnum.
                      imseg2-rspos =  ws-rspos.
                      COLLECT imseg2.
              ENDSELECT.

  • What's happening with cold fusion?!

    first, this very page is throwing js errors in both ie8 and firefox 24.0  , i can't reply to any posts
    then, with all this flurry of security breaches on gov websites running cold fusion, do we have a comprehensive white paper showing how to plug all the security holes that were uncovered?

    Thanks Carl,
    when clicking the reply link on the forum, in ie8 i get:
    User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1;
    Trident/4.0; (R1 1.6); .NET CLR 2.0.50727; .NET CLR 3.0.04506.30;
    .NET4.0C; .NET4.0E; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729;
    InfoPath.3)
    Timestamp: Mon, 18 Nov 2013 15:26:45 UTC
    Message: Not implemented
    Line: 1616
    Char: 13546
    Code: 0
    URI:
    http://forums.adobe.com/4.5.6/resources/scripts/gen/220b1b06a29f901e1d24252ac800883e.js
    and in fireFox:
    ReferenceError: $ is not defined
    https://www.adobe.com/account/sign-in.adobedotcom.html?returnURL=%2Fcfusion%2Fmembership%2 Findex%2Ecfm%3Floc%3Den%5Fus%26nl%3D1%26ref%3Dlogin
    Line 70
    ion amariutei | [email protected] | 212-578-1011
    From:
    Carl Von Stetten <[email protected]>
    To:
    ion <[email protected]>
    Date:
    11/18/2013 11:19 AM
    Subject:
    what's happening with cold fusion?!
    Re: what's happening with cold fusion?!
    created by Carl Von Stetten in Advanced Techniques - View the full
    discussion
    Site seems to be working fine for me.  As to plugging security holes,
    there are two things you need to do:
    1.      Keep your servers updated with the latest patch(es).  If you are
    on CF10, use the built-in automatic updater.  If on CF8 or CF9, take a
    look at David Epler's Unofficial Updater project.
    2.      Follow the appropriate ColdFusion lockdown guide for the version
    you are running.
    For CF9:
    http://www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/910
    25512-cf9-lockdownguide-wp-ue.pdf
    For CF10:
    http://www.adobe.com/content/dam/Adobe/en/products/coldfusion/pdfs/cf1
    0/cf10-lockdown-guide.pdf
    -Carl V.
    Please note that the Adobe Forums do not accept email attachments. If you
    want to embed a screen image in your message please visit the thread in
    the forum to embed the image at
    http://forums.adobe.com/message/5851524#5851524
    Replies to this message go to everyone subscribed to this thread, not
    directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page: [
    http://forums.adobe.com/message/5851524#5851524]
    To unsubscribe from this thread, please visit the message page at [
    http://forums.adobe.com/message/5851524#5851524]. In the Actions box on
    the right, click the Stop Email Notifications link.
    Start a new discussion in Advanced Techniques at Adobe Community
    For more information about maintaining your forum email notifications
    please go to http://forums.adobe.com/thread/416458?tstart=0.
    The information contained in this message may be CONFIDENTIAL and is for the intended addressee only.  Any unauthorized use, dissemination of the information, or copying of this message is prohibited.  If you are not the intended addressee, please notify the sender immediately and delete this message.

  • WHATS GONNA HAPPEN WITH IWEB NEXT YEAR WHEN MOBILE ME CHANGE TO ICLOUD?

    WHATS GONNA HAPPEN WITH IWEB NEXT YEAR WHEN MOBILE ME CHANGE TO ICLOUD?

    Don't use all caps.  It's tantamount to shouting and more difficult to read.
    It is now confirmed that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. However, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken.  If I published directly from iWeb to the FPT server those two features continued to work correctly.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the iLife 11 boxed version that is still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
    Personally, if I didn't already have a copy I would purchase one to have it for reinstallation purposes if ever needed.
    This may be of some interest to you: Life After MobileMe.
    OT

  • I plan on reformatting my computer, what will happen with my ipod?

    I plan on reformatting my computer and was wondering what will happen with my ipod, will i hafto restore all of its songs and since ive saved the ipod and named it and everything will i hafto go through that proccess again? please explain?

    Hi,
    Please make sure that you should copy all the music back to your iTunes before you do the Syc with your iPod. Please read the following post
    http://discussions.apple.com/thread.jspa?threadID=250220&tstart=30

  • If I buy a MacBook pro now, what will happen with it once the Lion OS makes it's appearance? Will I need to buy a new one again?

    If I buy a MacBook pro now, what will happen with it once the Lion OS makes it's appearance? Will I need to buy a new one again?

    Lion will run on most Intel machines. It will not run on the following machines:
    MacBook Pro (sold before October 2006)
    MacBook (sold before November 2006)
    Mac Mini (sold before August 2007)
    iMac (sold before September 2006)
    It requires an Intel Core 2 Duo (or later CPU). Those machines listed above were all Intel Core Duo machines and with the exception of one of the Mac Minis, an Intel Core Solo. So we're talking 4+ year old machines. I have not tested Lion on a machine with anything less than 2GB of RAM.
    Wikipedia has a pretty good public summation of what's known so far and it's quite accurate - http://en.wikipedia.org/wiki/Mac_OS_X_Lion
    The biggest thing of note so far is that you cannot install/run Rosetta. Which maybe problematic for some users.

Maybe you are looking for