What's happening if I instal twise osx lion

HI,what's happening if I've installed OS X mountain lion twise IMac ?Thanks

Mountain Lion can only be reinstalled by reinstalling OS X using Mountain Lion Recovery
Just re downloading Mountain Lion from the App Store does not reinstall OS X but you can make use of that download to make a Mountain Lion boot disc > How to make a bootable Mountain Lion install drive | Macworld

Similar Messages

What will happen if I install Lion on my macbook pro core duo??

What will happen if I install Lion on my macbook pro core duo? I have one of the first Intel MacBook Pro's with a Core Duo processer, I'm having hard drive problems so want to format it and re-install my OS. I can't find my Snow Leopard disk so the easiest thing to do would be to download Lion but I have been told that my MacBook needs to have a Core 2 Duo processer so I just wondered if anyone else has tried Lion on a MacBook like mine??

Nothing.
Lion will not run on a core duo, it needs a core 2 duo as a minimum
see Technical Specifications
Also you will need SL running to access the App Store to download Lion. So In a number of ways this won;t work.
regards

What's the difference between client combo and server combo? Also, what would happen if I install both?

what's the difference between client combo and server combo? Also, what would happen if I install both?

One is for the base version of the Mac OS, the other is for the Server version. You can only install the one that matches your system.

What will happen if i install lollipop from another region ?

Hello guys,
I have Z2 and it seems that sony has released lollipop for nordic regions (http://forum.xda-developers.com/xperia-z2/general/lollipop-690-z2-z3-z3c-t3056997)
but mine is UK version. (not carrier locked or something)
I wana know if its safe to install this version on my phone. And What will happen if i install it ?

There are different model number and these are what let us know where in the world or area you are and what bands or networks frequency's your phone will work on so Flashing a EU firmware onto a US device may make your phone stop working ie:receiving a network signal you may also notice that a Z3 for example has different model numbers like D6603, D6643, D6653 and D6616 so flashing a D6653 firmware onto a D6603 could make your device what's known as a brick
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

My Lightroom 5 says I have a new update, but the download looks like it is trying to switch me over to creative cloud. What will happen if I install this download?

My lightroom 5 says I have a new update, but the download looks like it will switch me over to creative cloud. What will happen if I install this download?

What about the notification looks like it will switch over to the creative cloud? I'd avoid it until you get a good answer to your question.

What will happen with my installed softwares?

Hi I am using MacBook Pro with C2D and having latest version of SL. But I have installed lots of software useful for my business including virtual machine and I am using Windows 7 ultimate on it. So I am wondering what will happen if I upgrade this to Lion? Do I need to install everything again or it will be as it is like on my snow leopard?

I don't know about VMware, but I can tell you that when I opened Windows XP the first time in Parallels after upgrading to Lion, I had to re-setup the virtual machine. Other than this, no problems. CS3 and older WILL NOT run in Lion, but CS4 and newer run without problems.
Go to About this Mac > applications, and here you can see which of your applications are PowerPC, thus not compatible with Lion.
Cheers

Cannot install mac OSX lion v.10.7 on mac mini

I try to install mac OSX lion v.10.7 but they say u need atleast 2GB of memory in HD Machintosh, but i have more enought memory already.

Hello, perhaps you're confusing RAM Memory with Disk Space?
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4

What has happened to iCal in OS X Lion?

I use iCal for all my events and since upgrading to Lion I have been experiencing majorproblems:
When double-clicking on an event to open it up, sometimes the event appears for a fraction of a second and disappears. A further double click is then required to open the event.
If I use copy and paste to duplicate an event, the pasted event will go to the date where it was copied from not the date where the mouse pointer is located. If I paste an event into a different month, the event goes to the same date as the original (but in the new month), not the date where the mouse pointer is located.
I have had problems with events that have disappeared after they have been created on my iMac. The events can be seen in my MobileMe account, on my MacBook, on my iPhone, on my iPad and even on my PC where I share calendars in Outlook. But they do not show on the iMac where the event was created.
I use several calendars, when events are copied and pasted, the original calendar sometimes changes.
I have noticed that a single click on a date in the month or week view no longer highlights that day.
None ofthese problems existed with OS X Leopard or Snow Leopard. What has happened to iCal in OS X Lion?
Please help.

https://discussions.apple.com/community/applications/ical

Cant sign into apple store when installing mac osx lion 10.7

please help me when i go to sign into apple store for installing max osx lion 10.7 it says item temporairly unavailble try again later.

Hi Cridda7,
Welcome to the Apple Support Communities!
I understand that you would like to update your Apple computer but when you attempt to access the Mac App Store, you receive an alert that the store is temporarily unavailable. In this situation, I would recommend the troubleshooting steps located in the attached article. The steps will be the same as if you were troubleshooting this alert for the iTunes Store.
Can't connect to the iTunes Store - Apple Support
Cheers,
Joe

My macbook isn't able to create another desktop even though i installed the osx lion

my macbook isn't able to create another desktop even though i installed the osx lion, help?

annestenvad wrote:
I'm not able to run a test myself, right? I'm definitely going back to the repair store tomorrow!
Wrong! Check out KB Article: Intel-based Macs: Using Apple Hardware Test
Personally, I would not be running no test. Apple has a 90 day warranty on all their repairs. Return your computer to the repair shop but this time.......
When it’s time to pick up your computer from the repair shop:
*** Before you leave the repair shop, make sure you have the repair tech(s) power the comp up and demonstrate that it is indeed working & repaired properly too your satisfaction.***

I've just installed Mac osx lion and my mac doesn't recognize (don't see) my audio interface. Focusrite Saffire pro 24 dsp.

I've just installed Mac osx lion and my mac doesn't recognize (don't see) my audio interface. Focusrite Saffire pro 24 dsp.
I had no problems on snow leopard.
thanks

Well I found my answer…
http://www.focusrite.com/answerbase/en/article.php?id=1159
At the time of writing, the following products arecurrently not working with OS X 10.7:
Saffire PRO 14
Saffire PRO 24
Saffire PRO 24 DSP
Saffire PRO 40
Liquid Saffire 56
Liquid Mix HD
Forté Suite
Scarlett Plug-In Suite
Focusrite is committed to providing support for ourproducts with the latest operating systems. We are currently working onproviding full support for our products with OS X Lion, and these will beavailable as soon as they are complete.
Please check this page regularly for the most up to dateinformation regarding OS X 10.7 Lion compatibility information.

What will happen when I install Leopard?

So when leopard comes out in a few weeks and I install it, what will happen to all the files and apps on my computer. Will they be gone? Will I have to redo everything?
This is my first transition on a new OS X. I switched right aftr Tiger came out. What is going to happen?

Fair comment!
If you want the full nine yards:
There are no guarantees, but following this procedure when installing updates and upgrades on your Mac will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.9 to 10.4.10. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them 10.4.10. compliant. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.

What will happen if i install this printer software update

RE: HP software update 2.11
i have an hp printer (of wich i am getting a replacement when i can)
i used to have a pc and the software was a nightmare it always wanted to update
and i dont trust or like hp software
will this update install an hp software program
i like the mac printer software i use it to scan and print just fine without the hp software
maybe a wierd question .. i might be a little scard from to much windows exposer haha

I don't blame you for your concern, but what will happen is probably nothing. No apps are installed, just new or updated drivers.
If you click the link associated with that update you will see a comprehensive list of all the updated HP drivers. The update probably delivers drivers for newer HP printers, leaving the older ones unaffected. If your existing printer is working you can just ignore the update.
I'm still using a LaserJet that I bought in 1993; the update didn't change anything.
If you are in the market for a new printer I recommend researching other manufacturers.

Cisco Connect not installing on OSX Lion

I am unable to install Cisco Connect v 1.3.11006.1 for Mac under OSX Lion 10.7.0 because Lion is not in the list of supported versions of OSX. As a result, the Setup program refuses to run.
Please can you advise when an updated Mac version of the Cisco Connect software will be released?
Thanks,
Daniel.

For everyone... here is the answer..... PLEASE LISTEN...
The software is simply a software version of the WEBLOG version. The "CISCO CONNECT" is simply a bull **bleep** version hyped up, that has a bunch of bloat ware and that is advertised. The Weblog version, which is actually the original "online" control access, that still works, is not mentioned for some reason as a 2nd means of gaining access to your routers information. What I didn't understand is why this web access site was not given before. it's actually very basic. Enter in this "http" access address: What is funny is, Cisco is the only router provider with a software access CD, when it is not needed. It's by far the most unsecure means of trying to access something, especially when it must always be "updated". This Lion update situation is the most evident example that they should just stick with the online version that they still use. So here it is. Just go to this site::: Enter this in....
192.168.1.1
Copy and past that and push enter. As soon as you do, you will enter the weblog. How? It's simple. You access your own web through your own internet connection, so the weblog address automatically detects your cisco router and shows your your security settings. A drop down box will appear. No need to put in a user name,,, Keep it blank. Then type in admin as the password. Sometimes you won't even need to do that. if "admin" doesn't work, type "password". If you are not already connected via your network, then make sure that you have an ethernet connection connected from your computer to port 1, of your router, so you can set up your router correctly, and so that your computer can directly connect to the online weblog, and you can set up your connection. I had to go online, and talk to a service rep on cisco just to get this very simple information. I asked her "why do you guys not have this website information available just in case the software runs into issues like this," and she said, "your riight, we need to address this," and I said, " I'm addressing it right now to those of us who are spending thousands on your products and can't even use it because you guys dont support it with your software." So I hope this helps you guys. ..

How do I install Mac OSX Lion client on the new Mac Mini Server?

If Apple would have had the quad-core processor option for the non-server Mac Mini, I would have just bought that, but I wanted the quad-core. I do not, however, need the server software. I found this article talking about how to disable the server functionality, but this article highlights how little that method actually does.
Ultimately, I just want to do a clean reinstall like I used to do prior to Lion. This process used to be so easy. Create a disk image of the desired operating system on USB, option boot, and you're done. Now it appears that Apple purposely impedes this process, as every time I boot from the USB I created with Mac OSX Lion client, I get a circle with a line through it. Is there any way around this restriction? Editing firmware, editing .plist files, etc?
Very disappointed that Apple is limiting what used to be such a simple process on Hardware and Software that I paid for but now can't get the functionality I want.

Sorry to be the bearer of bad news, but what I don't think you can do what you're asking for. Closest thing is going to be disabling the server components like it says in the article, but again, that doesn't do much.

What's happening if I instal twise osx lion

Similar Messages

Maybe you are looking for