What's impact of changing DSN preferences?

Based upon my inability to update my iPad2 with its latest iOS 5.0.1, I was encouraged to and did change my DSN preferences in system preferences to the two Google ones (8.8.8.8 and 8.8.4.4).  I think what I replaced were the original preferences put in place by my Internet provider, Charter.net.  Are there adverse consequences of changing the DSN, and should I change them back to those placed there originally?

No, but use Open DNS instead:
Adding Open DNS codes to your Network Preferences, should give good results in terms of speed-up as well as added security, (including anti-phishing and redirects) (Full information about Open DNS is here: http://www.opendns.com/home/nobloat )
If you are using a single computer: Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu, and in the box marked 'DNS Servers' add the following two numbers:
208.67.222.222
208.67.220.220
(You can also enter them if you click on Advanced and then DNS)

Similar Messages

  • What's Impact of changing the customer Name(along with Bill To and Ship To) at the header level after book

    Dear All,
    Revision: 11.5.10.2
    We have a case where some of the orders we have created have incorrect customer name along with incorrect Bill To Ship To.
    All these orders are booked. And their Line Status is either Awaiting Shipping or Supply Eligible.
    What Impact of changing the customer Name(along with Bill To and Ship To) at the header level.
    Thanks,
    Helen

    Hi Helen-Oracle
    As said above there should not be an impact if the warehouse on the order before and after changing the customer, ship to and bill to remains same.
    Additionally, if the item on-hand qty is sufficient to reserve the item and there is no B2B internal requisition kicked off.
    As long as the above conditions are fine, I don't see any impact of changing the customer, bill to and ship to.
    Also, you can run a complete wing to wing cycle in case you really want to test the behavior of the system in such scenario.
    Please feel free to mark the response as helpful or correct if you think it is helpful and to help people easily find help and answered responses.
    Thanks
    Mirza Tanzeel

  • Trying to download new firefox get a download error. What association must I change in preferences for the download to work?

    Have a Pentium4 with Windows XP and have been using Firefox 3.6 happily.
    Tried to download the new version as Firefox urged me to and got error message that download failed Firefox setup could not be opened because the associated helper application does not exist. Change the association in your preferences.
    OK how do I do this and what association do I change it to?

    get latest version of Firefox from
    * getfirefox.com

  • What impact do changes to the CUCM "Default Credential Policy" have?

    Hi all,
    We have been asked to make an update to the 'Default Credential Policy' on CUCM 6.1. The update is easy enough to carry out:  User Management > Credential Policy > Default Credential Policy.
    However, Cisco documentation isn't too clear as to what accounts this will impact. As best i can tell any changes made here will impact any 'new' Application or SuperUser (etc) accounts that are created *after* the policy is updated.  Existing application accounts won't get impacted and would require a Bulk Upload to change them. Does that sound correct?
    I'm also a little unsure if changes to this policy will impact the 'administrator' account that we created when we installed CUCM, or any of the normal 'phone' user accounts that our many IP phone users have (i presume not, but again Cisco documentation doesn't seem too hot on precisely what gets impacted by changes to this policy). 
    Screenshot below of the GUI screen i am referring to.
    Thoughts appreciated.
    Many thanks!

    Quick bump. We've read a few links that suggest User and Application User passwords etc would be impacted.  However, they don't mention the main Administrator account, nor if we would need to use Bulk Upload to change existing User and Application User settings after chaning the Default Policy settings:
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/7_1_2/ccmcfg/b08crpdf.html#wp1064073
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b08crpol.html#wp1030222
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmcfg/b08crpdf.html#wp1055303
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a0080a57c4c.shtml
    Ironically, a Google search for "CUCM Default Credential Policy" now lists this post as the fifth most significant one when trying those search terms doh!
    Any thoughts appreciated.
    Thanks

  • What is the impact - Activating Change Logs for Material Classification Dta

    To activate Change Logs for Material Classification Data I must first set the flag for "Multiple Objs Allowed" for the Class Type 001 Material Class. I am curious of what the impact of setting this flag will be. Also, is there a way to measure the DASD impact of activating the Change logging for this data.
    Thankyou
    Kevin

    In addition to the performance impact the process of turning on Change Logs for Classification data will convert the tables KSSK and AUSP to use an internal SAP number as a key instead of the Material number. This will cause problems for any custom programs that access those files directly and expect the material number to be the key. This file conversion occurs during the execution of program RCCLUKA2 which is used to Flag the change logs for existing records. This can be reversed by running report RMCLINOB. Because of the above impact we decided here to NOT implement this change in production.

  • What would be the impact of changing Enterprise and Domain admin password

    Hello,
    I'm planning to change the Enterprise/Domain Admin's password for some security reasons. I do not know what all will fail, what are all the process is going to be impacted. Actually I don't want to see the bigger impact after changing
    the password.
    I've gone thru' few articles but it's in Powershell where I have the limited knowledge & can't customize the script.
    Is there a tool or a way to scan the LAN/Servers and get a clear output where these users accounts (Domain & Enterprise Admin) being used, especially windows services wise, and all other dependencies?
    Can anybody help?
    Regards,
    MSK

    Hello
    As far as I have experienced by changing the enterprise admin password there will be no impact on the environment, not event on
    Services.msc console. But resetting an account is a different story. If you change the user account, services which relies on the user will be updated automatically but by resetting the password you have to manually enter the password on each
    service.
    Also I am thinking about if you use remote desktop with saved credentials to connect to DC's as enterprise admin, you may experience account lockout problems. So wise move is to create another account as member of enterprise admins group and keep it safe
    with a strong password and save it for a rainy day. In that case if the original enterprise admin locked out due to incorrect logons you have a gold key to overcome the situation.
    Regards.
    Mahdi Tehrani Loves Powershell
    Please kindly click on Propose As Answer or to mark this post as
    and helpfull to other poeple.

  • What is the impact by changing gl account contra account: acquisition value

    Hi experts
    what is the impact by changing gl account  (contra account: acquisition value in asset accounting(AO90)  to the different company codes and different countries. Please review and send across step by step points to us
    Warm regards
    Sreenivas

    hi,
    thnaks for reply, but we cannot reverse as it is initially uploaded directly in asset reconciliation account, moreover, we are already in production and we are yet to run the depriciation from april, finanlly we decided to post the difference amount in reconciliation accounts with OASV, but till now opening upload account shows zero balance, once we post the difference amounts directly in reconciliation accounts this initial upload gl account shows the carryforward balance from march. is there any other alternative,

  • What are the impacts of changing material group of a Material ?

    Hi,
    Could some one tell me in detail about the impacts of changing material group of a material that is active in procrement?
    Thanks,
    Veera

    Hi,
    If you are changing it from one valid group to another valid group and both will still be there afterwards, then the impact is small, but important.
    The data in the Info systems and BW etc. will have been updated with the the "old" material group and so if you tried to compare them you would find differences.
    It is something that does happen from time to time and as long as the two groups will still be ther afterwards there should be no reason why this would cause any technical or system problems. The effect is purely on the historic data.
    I have seen this done several times in many implementations and so far it has not caused any major problems apart from some reports "appearing" wrong if you compare them against other reports that involve historical movements.
    Steve B

  • Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce

    Photoshop CS6 keeps crashing. I am using a brand new IMAC, I have 16GB RAM recently updated as it was running slow with 8GB and lots of hardrive space. When it crashes, i lose all my presents and it changes my preferences, it also fails to save or produce a recovered file despite settings asking it to do so every 5 mins now. When i try to report the problem, it says it has found an issue and gives me a link to a solution....but wont let me click on the link.... PLEASE HELP! It's killing my productivity.

    If the crash started right after you added RAM, it could be a bad Ram dimm. You can try this - change the amount of RAM in Photoshop to 4G, this should stop Photoshop from using the higher ram. If it doesn't crash, it's probably the ram. Or run a diagnostic app. You don't say when it crashes, what you're doing when it crashes - it there a pattern? Did it ever work on this computer? Did it work on your previous computer? Without a lot of data, it could be related to the new computer... What OS version? Did you recently update it? Have you updated Photoshop to the most recent update?
    Do you have any plug-ins loaded? Try restarting Photoshop, and immediately press & hold the shfit key to turn off plug-ins.

  • Thunderbird puts a new message at the end of the thread. Is there any way of changing this preference to listing new message at top of the thread?

    Thunderbird puts a new message at the end of the thread.
    Is there any way of changing this preference so that new messages are displayed at the top of the thread.
    This is is more logical. You need to see new message in thread directly, rather than scanning to end of thread to see what is there.

    No it is not possible. The newest message is attached to the message it is in reply to.
    The conversations add-on might better suit your needs. see https://addons.mozilla.org/thunderbird/addon/gmail-conversation-view/?src=ss

  • Impact of changes in CUNI

    Dear All,
    I have question about the impact of changing some fields in CUNI (and t006).
    MSEHI - Int. meas. unit: As far as I know it can't be changed. If change is needed, new UoM needs to be added, right?
    KZEX3 and KZEX6 - 3 and 6 char.external unit: What are these fields for?
    KZKEH: Is that correct that if it is not selected, the UoM is not active?
    KZ1EH and KZ2EH  - (1) and (2) unit: What are these fields used for?
    KZWOB - Value-based commt: What is it for? Where it is important in the process?
    MSEH3 - Commercial: Where it is used? What is the impact of changing it?
    MSEH6 - Technical: Where it is used? What is the impact of changing it?
    MSEHT - Measuremt unit text: Where it is used? What is the impact of changing it?
    MSEHL - Unit text: Where it is used? What is the impact of changing it?
    In T006d is it possible to change the Time and Temperature Dependency of a used Dimension? What is the impact of this action?
    Thank you
    Andrea

    Reports such as financial statements, tax reports, GL balances may not reflect previous period balances correctly when you give single business area. You need to workaround to get correct balances.
    With respect to current balances it will not be a problem, as you might be transferring balances in various accounts of discontinued business areas to presently used business area.

  • Document prints in reverse, what setting can I change to correct this?

    Document prints in reverse, what setting can I change to correct this?  Not a printer problem - documents print in correct order when using other programs.  Using Acrobat X Pro on a Mac.

    One more place to check.  Open a document you'd like to print, then click the 'Printer...' button.  Hit 'Yes' to the warning dialog box that comes up.  For your specific printer, this might already be enabled.  Change the drop-down menu that says 'Layout' to 'Paper Handling'.  It could be that the Page Order preference has been changed here too.  Just a thought!
    -David

  • Help, please! I am suddenly being presented with CYMK colors to 2 decimal points.  What did I accidentally change and how can I fix it?

    This is driving me crazy. I am suddenly being presented with CYMK colors to 2 decimal points.  Too much info for me.  What did I accidentally change and how can I fix it?  I've been through all of the preferences, views etc. I can find but no luck.  Thinking this has something to with the color settings (obviously) but with all of the possible options there I could use some help.  Thanks, all!

    May have been a switch from RGB to CMYK.
    Or you moved one of the sliders with shift key pressed.

  • Want to know that wat is the impact of changing a field label in master

    Dear Experts,
    Want to know that what is the impact of changing a field label in masters ?

    hai sap gurus,
                          kindly clear my doubt..
    Swetha

  • Changing printing preference​s in hp connected

    I want to change my printer preferences when using ePrint to send an email to my printer.  The preferences I'd like to change are printing in black & white as default and also changing to duplex as default if possible.  On another post it said you can login to eprintcenter to update preferences but when I try to login to that it redirects me to HP Connected.  There doesn't seem to be anywhere I can change my printer preferences in HP Connected.  How can I do that?

    Hi,
    I have not read the post which says change printer preferences under HP Connected therefore I can't say more BUTfrom your computer, you can set default B&W and also auto duplex on many printers which support those functions. What is your printer ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for