What's means by Aux in the Hardware Sensors Monitor or AIDA32?

Sometimes, it shows only +0.39V or more, sometimes it's show as high as +1.50V,
Does this due to the psu which i use?
Will it affect the performance of my pc?
Thanks!!
Btw, If This Temperature too high, especially NB？？
CPU    55
System   36
NB   66
My system:
P4 2.4C @800hmz FSB using stock Intel cooler
Neo2-FIS2R bios 1.6 (2003-6-26)
2x256 Kingston hyperX DDR KHX3200 2-3-3-6 Burst 8, Dual-channel, 2.6v, Ultra turbo mode running @ 400mhz
MSI FX-TDR5200 128mb Graphic Card
LG DVD 16x & Liteon 52-24-52x CDRW
Western Digital 7200rpm 80GB 8mb cache ATA100
Edifier R501 Speaker
Samsung 765mb 17" monitor
PSU: HEC 300w purepower
WinXP SP1
Intel Inf Driver v5.0.1.1015
Intel Gigabit Ethernet Drivers v7.0.36.0
Intel 10/100 Ethernet Drivers v7.0.26.0
DirectX 9.0a

Similar Messages

HT1218 I am receiving the following error on my time machine, does anyone know what it means? Error message = The backup disk image "/Volumes/Data/Richard's MacBook Pro.sparsebundle" is already in use.

I am receiving the following error on my time machine, does anyone know what it means? Error message = The backup disk image “/Volumes/Data/Richard’s MacBook Pro.sparsebundle” is already in use.

Please look over the right of this page under the heading of More Like This for multiple answers and solutions for this bug.

My Intel iMac only shows a blinking folder with a question mark when powering it up. What can I do besides running the hardware test of the original installer disc.

My Intel iMac only shows a blinking folder with a question mark when powered up.
I did run the hardware test of the original installer disc and no trouble was found and I am out of options. Does anybody have any advice what to do next

If the drive shows errors then repair, if after the 3rd pass of Repair Disk in Disk Utility it still shows errors it's telling you it's time to be replaced. Take it to your local Apple Store or AASP for repair, when it comes back use your backup (either Time Machine or bootable clone) to restore so you can pick up where you left off.

What will I do after installing the hardwares?

I have installed GPIB interface card and labview5.1,and connected the devices with IEEE488 cables.Now I want to make a VI program for automation measurement,what will I do at first.I don't know how to go on.

Hello Kim,
Check out the NI Developer Zone, it has lots of information about developing drivers. Here are a couple links from Developer Zone to get you started.
Search Instrument Driver Network
(Check for an existing driver on the network)
Development Topics
(If you can't find a driver, you'll need to make one)
Ray K
NI Applications Engineer

I just purchased an I pad mini and when I send an email a get the message "a copy has been placed in the outbox. Recipient was rejected by the Server. I do not know what that means. Who is the server. Why are the emails not sent?

I just purchased the new I pad mini Retina display 16 GB and have AT&T Lite.
I cannot send emails. I do receive them.
The message is "copy placed in outbox. Recipient rejected by the server".
Who is the server?

Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional.

My ipod glitches what i mean by that is the screen goes jumpy and I cannot read or see that I am doing how can I fix this?

I need help

Try:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

When trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

when trying to sync my iphone in itunes i keep getting the error message "itunes cannot sync apps because the apps installed on the iphone could not be determined." can anyone explain what this means?

I received the same error message after I had recently updated iTunes to 10.5.1 and I had wirelessly updated 13 apps. I had to go into iTunes and select Apps, on the bottom right it said I needed to update 13 apps. I updated the apps via iTunes and then synced again without an issue.
iPhone 4S / OSX 10.6.8 / iTunes 10.5.1

HT1430 i want a totally new iPod but i only want to reset it.....do you know what i mean??.

i want a totally new iPod but i only want to reset it......do you know what i mean??.

Connect the iOS device to your computer and restore to factory settings/new iPod via iTunes (not from backup) The iPod will be erased.
For how to restore:
iTunes: Restoring iOS software

Proxy Server is refusing connection - I don't even know what this means.

When I try to open Firefox I get the message Proxy server is refusing connection. I don't know what this means.

You can find the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]]

Support code 5011, any ideas what this means.

I purchase a MX452 printer upon start up I'm getting support code 5011, any ideas what this means.

Hello everyone,
If the error remains after unplugging the printer for at least 10 minutes, it may require service (and please note that unplugging it will delete any faxes stored in the machine's memory).
It would be best to get in touch with our technical support team at http://bit.ly/Phone_Support for further assistance.
Thanks!
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

HT201210 It says my firmware file is not compatible after I tried to update my IPhone 4. Does anyone know what this means?

Hello,
I tried to download updates on my IPhone 4 and a message box appeared saying--after it downloaded the updates on my computer--that my firmware file is not compatible. Does anyone know what this means?
Thank you

Only the individual that set the restrictions passcode knows what it is.
If you do not know it or have forgotten it, put the device in DFU mode (google it) and restore as new.

Connecting LabVIEW to hardware sensors through myRIO

Hi,
I am an electrical engineering student in the senior year and my senior project is about monitoring and controlling the critical equipment in the industrials. the project contains sensors ( tempreture, missing phasing, vibration ) to control motors and transformers and i will biuld those sensors with my team. i want to design a control panel for those sensor in the LabVIEW and i should use myRIO as microcontroller to communicate between the sensors and the LabVIEW for recieving the signals from the sensors and send it to the LabVIEW to be shown in the control panel and then to have an action to cut the power for example.
my question is,
how to use myRIO and connect it to the LabVIEW and the sensors? what should i do? what should i have? for time being i don't have any information about this.. please provide me with all information that i may need.
can you help me brothers & sistors ..
Engineer34

Hi Engineer,
the project contains sensors ( tempreture, missing phasing, vibration ) to control motors and transformers
Sounds like some power is needed to be controlled here. Don't forget safety measures…
How to connect the hardware sensors to myRIO board?
That depends on those sensors. You need to provide more information…
that is too much
It's your final year before becoming an engineer and you claim "too much information I need to read/watch"? What kind of engineer to you plan to be?
all totrials there talking about the realtion between myRIO and LabVIEW
Because that's the main part of the work: reading values from your hardware, analyzing it and calculation output signals to fulfill your control task…
And also because LabVIEW is the IDE to create any programs running on those myRIOs…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

My Mac is doing strange things: delaying between users, mouse flickering and bouncing, gets stuck with rainbow wheel flickering. I ran the appel hardware test and it detected an error: 4MOT/4/40000003:HDD-1233 Does anybody know what that means? HELP!

My imac is doing strange things:
-delaying between users: when closing session it goes to blue, then takes a while to appear users signin box, and then wont recognize mouse command to enter until a couple of minutes later... then everything seems alright until....
-it gets stuck between things, the rainbow wheel appears and its just delays there forever....
-and every now and then the mouse starts flickering and bouncing wildly onscreen.
I ran the appel hardware test and it detected an error:
4MOT/4/40000003:HDD-1233
Does anybody know what that means? HELP!

WZZZ answered about where to get iStat. And do check the SMART status. If it is an overheating problem due to a fan or logic board problem, your hard drive is possibly cooking itself to death. If so it isn't a faulty hard drive even though the hard drive might fail. So assuming it's a temperature problem, even if you are able to repair things on the disk with software, that is working on symptoms, not causes. I could be wrong however.
RE: AppleCare: Your iMac came with one year of AppleCare (Apple's warranty program), but within the first year you can buy 2 more years. You have to extend by the one year anniversary of purchase of the computer. Your 10,1 is too old to still be in the first year, and since you asked what it was, I'm sure you don't have it. Bottom line meaning is that whatever this problem turns out to be, you'll have to pay for it. Unless there is something like this. It is for 2011 iMacs with certain Seagate drives. You can put in your serial number for fun, but it looks like yours is too old. Lastly, some people have had Apple help them anyway if it is just out of warranty, but many have not. Your machine is one of these. Type in 10,1 in the search box. Is there an Apple Store near you? Just b/c it's out of warranty doesn't mean you shouldn't have it looked at by Apple. But no one here can say at all what Apple will or will not do.
Hope you get it taken care of!

I run a hardware test and it gave me the error code 4mot/4/40000003:HDD-1500: does anyone know what it means?

Hello,
I have a problem of my iMac freezing up regularly for no obvious reason.
So I ran a hardware test and it returns me only with the code 4MOT/4/40000003:HDD-1500.
I need some help to know what that means and how to repair my iMac.
William

William, unfortunately it means your hard disk drive has or is failing and needs to be replaced. Hopefully you have a current backup or clone. You can have the drive replaced at an Apple Store or AASP or do it yourself if you're inclined by following the guide fir your specific iMac at http://www.ifixit.com/Device/Mac_Desktop

How do I find out what an error code found on running the hardware test, means?

After running the hardware test on my Mac Pro I got an error code of: 4HDD/11/40000004: SATA (4,0) -- HOW DO I FIND OUT WHAT THIS MEANS?

It means your one of your SATA Hard drives is having trouble (or possibly your DVD drive, but not likley).
Got good backups? Now would be a good time to try to make some if you don't.

What's means by Aux in the Hardware Sensors Monitor or AIDA32?

Similar Messages

Maybe you are looking for