What's my video adapter's IO address and interrupt level?

I installed solaris8.0 for intel platform. When I logged in as root, the graphic didn't appear normally.
I ran the program KConfiguration, and didn't find the item named "Standard VGA 256 colors". And the program let me input the video adapter's I/O address and interrupt level when I chose to add a new device.
My adapter is S3 Virdge or something like that. It do work on window2000. The windows operating system never let me input the I/O address and interrupt level, and I think it's "Plug & Play". Now, what can I input in the KConfiguration?
By the way, if the graphic is wrong,and I can do nothing on the computer,how can I install the adapter's driver?

http://www.zvenigorod.ru/solaris8x86/hcl.htm

Similar Messages

DVI to video adapter, same as mini and powermac?

Anyone know if the DVI to video adapter for the powermac G5 and the mini will work with the MBP?

Has anyone tried this for sure? If you check the Apple store there are some comments about it not working with certain NVidia cards on the PowerMac G5, even though Apple specifically states that it works on the PowerMac and the Mini. If anyone has actually tried hooking this adapter up to a MacBook, or knows someone that has I would love to know.
Thanks.

Apple Video Adapter Blew my Inverter and HELP?

I had purchased a few television shows from itunes and wished to watch them on my television. I went to the Apple store today and purchased an Apple Video adapter for Mini-VGA to Video Out M9109G/A. I asked if it was the correct adapter and everyone I asked stated it was. I came home, unplugged my PS2 from my video in on my television, plugged the adapter into my iMac. The video resolution adjusted to something like 800 stretched I took the SAME rca cable used for my PS2 and plugged it into the adapter. A popping noise occured and my screen went black.
Zapped Pram, Started from Install CD 1, Took back off, plugged in adapter, pressed start button and noted that LED 3 was lit. Following the troubleshooting instructions I ordered the replacement inverter.
Now my problems/questions are this
1) Why did this happen? I've plugged all kinds of things into that port on the television without question. Should I never use the monitor out w/ the Apple Adapter?
2) I don't have a backup of my data from friday, saturday, or sunday. I attempted to boot the (screen dead) imac via target mode through my pismo in order to clone the drive out, but it wouldn't appear. Is this normal w/ a 'defective inverter'. Is there any way to get my data? I have another identical model, and I know I CAN exchange the drives (leaving the sensor and the case plugged in so as to avoid any cable problems), but is this a bad idea?
Thanks for any advice on this.
BTW, all components line conditioned w/ UPS.
Well..Apple Palo Alto fixed my machine in one day. I'm very impressed. Unfortunately, I couldn't de-authorize my machine (ITMS) prior to the midplane replacement so now iTunes isn't working since it thinks it is authorized or something. I'm trying here, but any suggestions would be good.
In summary. A) Good people at Apple told me to switch drives to my other imac to backup and this worked fine. B) Repair was completely quickly and machine works.
C) If you have this situation with authorization: 1) Open terminal, type cd /users/shared then type mv "SC Info" "old_SC Info". 2) Create a new user (I did w/ admin). 3) login to the new user account, launch itunes and try to deauthorize (you should get a message you aren't authorized) so buy a free song and authorize. Login to your original user and try itunes (shoudl work) delete the newer user and you can remove "old_SC Info" or keep it if you so choose.
Hope my rambling is helpful to someone.

On Mac Pro I use my second video out to connect a standard crt vga monitor. When I have it plugged in when I boot, the computer hangs with the blue screen everyone else has, never showing the mac os x loading screen. If I have it unplugged when I boot, everything starts fine but when I plug the vga monitor back in, it does not find the monitor after clicking detect displays. This was all working fine before 10.5, so it has to be an issue with the os communicating with my video card.
I assume this all stems from the same issues you are having. There is a glitch in either the video driver or the new core for video that they have not fixed yet.
I may eventually call on this, but right now, I dont have 2 hours to waste speaking to someone in the Philippines that is reading a script.

Could you tell me what's the meaning of the logfile-path and log-level?

we are running an productive xml database. but it is not stable now. Sometime it would report resource conflict error while you access xmldb via http protocol. I read the database logs and listener logs, but no abnormal message could be found. So, I want to find more information from the xmldb logs. While I run select DBMS_XDB.cfg_get().getclobval() from dual, I found that there are several logfile-path and log-level tags and I guess that these would be xmldb logs. Does anyone know what's the meaning of these tags?

I wondered about that one often too. I didn't have a chance yet to investigate (but maybe Mark will elaborate a little here), my guess is that it / or will be a possibility to enable tracing regarding the protocols or servlets.
Though It look like if you enable it it will trace to the XML file defined in the xdbconfig.xml. I also guess that (because there is also a XSD counterpart) that one could create an resource that streams the errors into a XDB ftp or http or ... xmltype table based on these settings.
This would be great because it would mature the protocol server regarding functionality. You could enable the tracing and see what happens. Until now the documentation doesn't give much extra insight...

<element name="ftpconfig">
<complexType><sequence>
<element name="ftp-port" type="unsignedShort" default="2100"/>
<element name="ftp-listener" type="string"/>
<element name="ftp-protocol" type="string"/>
<element name="logfile-path" type="string" default="/sys/log/ftplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="buffer-size" default="8192">
<simpleType>
<restriction base="unsignedInt">
<minInclusive value="1024"/> 
<maxInclusive value="1048496"/> 
</restriction>
</simpleType>
</element>
<element name="ftp-welcome-message" type="string" minOccurs="0"
maxOccurs="1"/>
</sequence></complexType>
</element>

<element name="httpconfig">
<complexType><sequence>
<element name="http-port" type="unsignedShort" default="8080"/>
<element name="http-listener" type="string"/>
<element name="http-protocol" type="string"/>
<element name="max-http-headers" type="unsignedInt" default="64"/>
<element name="max-header-size" type="unsignedInt" default="4096"/>
<element name="max-request-body" type="unsignedInt" default="2000000000"
minOccurs="1"/>
<element name="session-timeout" type="unsignedInt" default="6000"/>
<element name="server-name" type="string"/>
<element name="logfile-path" type="string"
default="/sys/log/httplog.xml"/>
<element name="log-level" type="unsignedInt" default="0"/>
<element name="servlet-realm" type="string" minOccurs="0"/>
...etc...

HT5312 What if I have a rescue email address and the option to reset security questions doesn't show up?

Idk what's wrong..

If you aren't getting the reset link then that implies that you don't have a rescue email address set up on your account - you're sure it's not an alternate email address ?
You will need to contact iTunes Support / Apple in your country to get the questions reset.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
When they've been reset you can then use the steps half-way down the page that you posted from to add a rescue email address for potential future use.

HT5312 what if I only have one email address and I cant use a rescue email address

is any one out there
this is not worth it, I have about 5 different windows open and still havent gotten an answer to a simple question

There are people here, but we are just fellow users on these forums, and it's not 'live chat'
If you only have one email address then you won't be able to set a rescue email address as it needs to be different to the main address on your account. You should be able to create a free email account via gmail, hotmail etc.

What do I do if my email address and password do not work?cc=us

I am using Windows 7 and have an HP Officejet Pro L7680 All-in-One Printer. When I open up the HP solution center and click on "Send a Fax" - the computer will often not open the fax box. I have had to re-install the Printer several times to make it work. Any other ideas?

Have you tried restating you computer and iTunes after you verified? You could also try logging on to the apple store online or logging out and back in of your account in iTunes

What do I do with script error, message, and interrupted installation of update?

What to do when installer screen for update stopped for Flash Player installation of 11.7.700.169

What is your operating system & web browser?

What Mac App can use to see Baseline and Main Level Profiles of H.264 files

Trying to figure out why some files play funny (herky jerky)... thinking it might be related to these being too high/unsupported...

Hi, I could be wrong but this could be a question of framerate ...
Even more if your projector does not support a native 24p framerate or if you do not correctly set the video output framerate ..
if your file has got a framerate on 24p (like on BDs), make sure to adjust this framerate on your video output in MAC OSX, else this will transform from 24p into 60p or 50p, with known consequences.
To get relevant information of your video files to adjust the output, U can check all information by using for instance MEDIA INSPECTOR.
I hope this can help U.
www.hdfever.fr (in french ... but very usefull) maybe could help U.
Regards

DVI to Video adapter doesn´t work! HELP!

I bought a dvi to video adapter (RCA or SVideo) and I already tried on two diferent TVs and none of them worked? What should I do? Does it have a setup to do?

We really need some more details to be able to help with your situation.
Is the adapter an Apple one, or some other brand?
What model TVs do you have? Please be as specific with the model numbers as possible.
When you say it doesn't work, what exactly happens?
And finally: what kind of Mac do you have? You posted in the Mac Mini forum, but your signature says MacBook.
If it is a Mac Mini, did you set it up initially using a regular monitor first?

I need a DVI-Video adapter or a MiniDisplayPort-Video adapter to capture analog sources in my Mac.

I need a DVI-Video adapter or a MiniDisplayPort-Video adapter to capture VCR and analog sources. Which is the right one for the Mac Pro (Early 2009 with NVIDIA GeForce GT 120 board)? Because i´ve seen a couple of cables but they say it´s just for Power Mac G5. I need exact model for my mac pro. I found this one but its´ just for Mac Pro with with ATI X1900 XT. The question is which one do I need for the NVIDIA GeForce GT 120 board? Is is the same one?
http://store.apple.com/us/product/M9267G/A
Thanks a lot!
MacSpecs:
2.66 GHz Quad-Core Intel Xeon
12 GB 1066 MHz DDR3 RAM.
Magui

There was a similar post just the other day with what I think is the same confusion. You said,
I need a DVI-Video adapter or a MiniDisplayPort-Video adapter to capture VCR and analog sources.
And the way I read that is you want video input (keyword you used was "capture"). Is that what you really want? If so adapters you are looking at is for video output, i.e., to send video from your computer to a display device (e.g., a TV or monitor). If you really want to video input (into your computer) then a simple cable isn't going to work. You need a pci card that handles such functionality.

Messed up color display and resolution because of mini-DVI to video adapter

Once I connected the mini-DVI to video adapter to the tv and got weird colors on my screen for a while but then it worked out, then after a while I disconnected the cable and turned my computer off. After that, everytime I turned my macbook on, the color is fine for two seconds and then it turns into a weird offset color, really bright colors, kinda sketchy and just a few colors, and a weird resolution and display obviously, but then I just connect my Mini-DVI to video adapter and disconnect it again (quickly) and the color returns to normal. How can I make the normal colors stay and not have to connect the mini-DVI to video adapater everytime I want to see the normal color display and resolution??
please help!

Open the Universal Access pane of System Preferences, click on Seeing, turn off the White on Black, VoiceOver, and Zoom options, and drag the Contrast slider all the way to the left. If the issue persists, create a new folder on the desktop, drag half of the items from the Library/Preferences/ folder of the item in the Finder's sidebar with the house icon into it, and narrow down the files until you've isolated the one responsible.
(30807)

Dynex mini-DVI to S-video adapter

I bought a Dynex mini-DVI to S-video adapter with my Macbook and I just tried to use it to plug into my projector via S-video. The resolution of my screen dropped to 800x600 but otherwise nothing happened. I even followed the Max OS X help information and turned on the computer with the adapter and cable plugged in and it still didn't display on the projector. I went to the display settings in system preferences and asked it to detect displays but I don't think it changed anything either. It seems the Dynex website is rather sparse on documentation and support. Any ideas? It'd be greatly appreciated!

I've tried pretty much everything with the same mini-DVI adapter made by Dynex.. if anyone can help it would be much appreciated!

What is the procedure to change the hostname and IP address of iAS?

Dear all,
I would like to change hostname and ip address of iAS, is it just only
change the kregedit or i need to change some config file?
Thank you for your help!
Angus

Hi,
i am not sure what do you mean by changing ip address and machine name.
Is the IP address and machine name of the installation machine changed?
Then you can change the ip address and machine name from kregedit. If
you want to run it from some other machine, you wont be able to do it.
regds
parsuram panigrahi
Angus Yiu wrote:
>
Dear all,
I would like to change hostname and ip address of iAS, is it just only
change the kregedit or i need to change some config file?
Thank you for your help!
Angus

Sap script address and logo change

Dear gurus,
I have requirment to change address and logo in existing form(z110_prenum-chck) and i don't know what you need to do to change address and logo. Please let me know what i need to know before changing any thing. Do i need to go in driver program and change something for address change.
Thanks in advance.
Regards
Dave

Hi,
1.Please upload the new logo using tcode : SE78
2. Go to the form, go to corresponding page--> go to pc editior --> Delete old image and insert new image which is uploaded by SE78.
3)you can mainatain the address dynamically by calling the subroutine pool.
the syntax is..
/: PERFORM <form> IN PROGRAM zprog
/: USING &FIELD1&
/: USING &FIELD2&
/: CHANGING &FIELD3&
/: ENDPERFORM
Regards
Kiran Sure

What's my video adapter's IO address and interrupt level?

Similar Messages

Maybe you are looking for