What's New in Cisco Active Advisor?
Hello folks,
A new version of CAA is up, with a bunch of new features and bug fixes. Here’s a glimpse of the new features added recently.
1) Delete devices
Devices on your inventory list can now be deleted.
Simply select the devices to delete and click the Trash icon at the top of the list.
You will be asked to confirm your delete request.
2) Enabled Features
Quickly discover your devices’ enabled features using CAA! All IOS devices that enter your inventory list are now scanned for their enabled features.
In the device’s window, you’ll find a new tab named ‘Enabled Features’
Clicking this tab will show all the features that are enabled on your IOS device, ordered by Technology and Features.
Clicking on the various Technology names will open up a new window that shows all available features under that category.
3) Line cards and modules
Good news! Now line cards and modules on your switches and routers will be discovered and displayed in CAA.
In the inventory list, some devices will have the line card and modules icon
This indicates that CAA has discovered line cards or modules on your chassis.
Clicking this icon will lead you to the list of discovered modules. There you will see its status information, as well as relevant lifecycle data.
When you go into the device overview window, click the same icon to see the line cards and modules list.
Please note that there is a color code to the line cards and modules icon.
Red indicates that CAA has found lifecycle alerts on one or more of your modules
Blue indicates that no lifecycle alerts have been found.
Please let us know what you think of these feature additions and of Cisco Active Advisor in general!
We'd love to hear your thoughts and feedback!
Thanks,
The CAA Team
Bug fixes.
Type "ios 6.0.2" into the search bar at the top of this page by Support and read for yourself.
Similar Messages
-
Upgrade to Cisco Active Advisor tonight at 9pm CDT
Hello CAA users,
Cisco Active Advisor will be upgraded tonight at 9:00PM CDT.
During this time, we expect a brief downtime, of up to 5 minutes, so please excuse the interruption and try us again a few minutes following.
Thank you,
The CAA TeamIf you want to maniuplate the update process you need to use the manual process over the automated. If you use the automated process we attempt to do the following. One host in each Cluster managed by the Nexus 1000V will be chosen for upgrade. This host will be put in maintenance mode, upgraded, removed from maintenance mode, and then move to the next host. I'm not sure how we choose the host in the cluster but in my setup where I use IP addresses as host names it uses the lowest number IP address first.
I can talk to engineering and see if it's possible, but we are constrained with what can be done based off the APIs that VMware makes available. Again if you want to control which ESX hosts are updated and when I would highly recommend using the manual method.
louis -
Cisco Active Advisor to be upgraded on Monday, January 5th at 11:00pm CT
Dear Cisco Active Advisor Users,
Cisco Active Advisor will be upgraded to a new version on Monday, January 5th, at 11:00pm CT.
During this time, the site will be unavailable for about 30 minutes.
We apologize for any inconvenience this may cause.
Thanks,
The Active Advisor TeamThe PC does support 4Gb of ram, although it's the max it supports, it does support it. I have read quite a bit about other people having this issue with other systems and I've gone all through my bios looking for SOME sort of option that I can at least play around with, but there's nothing there. I've also upgraded the bios thinking that "maybe" it could be something with that. The video card I'm using is a Nvidia Quadro NVS 420 512 Mb. I've tried disabling IndirectMemoryAccess in my xorg.conf thinking that might be messing with it somehow, but it did nothing. I just tried removing the video card altogether and running w/ the onboard video and alas! I recovered 512Mb, which I would be pleased with, but when I add the card back, the available ram disappears again. So now my question is this... Why would the kernel be reserving 512Mb of system ram for a card that has 512Mb of ram built in (at the same time not visibly acknowledging the fact that it exists)? Is this maybe a kernel option that I can pass at boot to disable it from reserving the system ram?
I'm sorry about the lack of the bbcode tags btw, I'm a first timer to the forums (however an arch user for some time now).
Thanks again for any input, it's much appreciated! -
Cisco Active Advisor Upgrade Wednesday Morning, April 23rd, at 6:30am CDT
Hello Cisco Active Advisor Users,
Cisco Active Advisor will be upgraded Wednesday morning, April 23rd, at 6:30am CDT.
During this process, a downtime of up to 5-10 minutes may be experienced in which the service may not be available. Please try to log in a few minutes later, should this happen.
We apologize for any inconvenience this may cause.
As always, please send your thoughts and comments about the service to [email protected]
Thank you,
The CAA Team
www.ciscoactiveadvisor.comYet another "victim" of BT's incompetent Indian call centre,
I think more a victim of BT's totally incompetent internal systems; and probably initially of Openreach's outsourcing to installation to companies that often provide untrained and lazy installers.
The mods should get things sorted. at: http://bt.custhelp.com/app/contact_email/c/4951 . But be aware they take 3 working days to reply: sometimes more if busy. That is pretty poor in your situation. They have a good record of getting things solved once they are on the case.
Good luck. -
Cisco Active Advisor Upgrade on Thursday June 5th, at 6:30am CDT
Hello Cisco Active Advisor Users,
Cisco Active Advisor will be upgraded on Thursday June 5th, at 6:30am CDT.
During this process, a downtime of up to 5-10 minutes may be experienced in which the service may not be available. Please try to log in a few minutes later, should this happen.
We apologize for any inconvenience this may cause.
As always, please send your thoughts and comments about the service to [email protected]
Thank you,
The Cisco Active Advisor Team
www.ciscoactiveadvisor.comYet another "victim" of BT's incompetent Indian call centre,
I think more a victim of BT's totally incompetent internal systems; and probably initially of Openreach's outsourcing to installation to companies that often provide untrained and lazy installers.
The mods should get things sorted. at: http://bt.custhelp.com/app/contact_email/c/4951 . But be aware they take 3 working days to reply: sometimes more if busy. That is pretty poor in your situation. They have a good record of getting things solved once they are on the case.
Good luck. -
Cisco Active Advisor Upgrade on Tuesday July 8th, at 8:00pm CDT
Hello Cisco Active Advisor Users,
Cisco Active Advisor will be upgraded on Tuesday July 8th, at 8:00pm CDT.
During this process, a downtime of up to 5-10 minutes may be experienced in which the service may not be available. Please try to log in a few minutes later, should this happen.
We apologize for any inconvenience this may cause.
As always, please send your thoughts and comments about the service to [email protected]
Thank you,
The Cisco Active Advisor Team
www.ciscoactiveadvisor.comThanks very much... I can't even say its a pain... 8.0(1a) at least sort of works... 8.5(1) absolutely does not... I would be hard pressed to even believe they tried an outbound call or even any call with it before they tossed it out for release... As you mentioned in base 8.0(1) variable passing didnt even work... does Calabrio have like one utopian demo system they use it on with like a single dialer port for testing?
I think Cisco needs to do a better job of holding ther OEM partner to some continuing standards rather then certifying version 4.x and saying the rest are good. At least Cisco could test it at a minimum!
I know there are plenty of VAR's that would happily do regression testing on behalf of the CCBU if asked
Chad -
Upgrade of Cisco Active Advisor on Wednesday, Dec 18th at 8pm CST
Hello CAA users,
The Cisco Active Advisor Portal will be upgrades this Wednesday, December 16th at 8pm CST.
We are expecting a downtime of up to 10 minutes, and apologize for the inconvenience this may cause.
We would also like to take this opportunity to wish you and yours a very Happy Holiday!
Thank you,
The CAA TeamHello CAA users,
The Cisco Active Advisor Portal will be upgrades this Wednesday, December 16th at 8pm CST.
We are expecting a downtime of up to 10 minutes, and apologize for the inconvenience this may cause.
We would also like to take this opportunity to wish you and yours a very Happy Holiday!
Thank you,
The CAA Team -
Upgrade of Cisco Active Advisor on Wednesday, Jan 8th at 8pm CST
Hello Cisco Active Advisor users,
Cisco Active Advisor will be upgraded tonight, January 8th, at 8pm CST.
During this process, a downtime of up to 5-10 minutes may be experienced in which the service may not be available. Please try to log in a few minutes later, should this happen.
We apologize for any inconvenience this may cause.
As always, please send us your thoughts and comments about the service. We'd love to hear your thoughts!
Thank you,
The CAA TeamHello Cisco Active Advisor users,
Cisco Active Advisor will be upgraded tonight, January 8th, at 8pm CST.
During this process, a downtime of up to 5-10 minutes may be experienced in which the service may not be available. Please try to log in a few minutes later, should this happen.
We apologize for any inconvenience this may cause.
As always, please send us your thoughts and comments about the service. We'd love to hear your thoughts!
Thank you,
The CAA Team -
With Ali Mohammed
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about what’s new in Cisco Identity Services Engine (ISE) Version 1.2 and to understand the new features and enhanced troubleshooting options with Cisco expert Ali Mohammed.
Cisco ISE can be deployed as an appliance or virtual machine to enforce security policy on all devices that attempt to gain access to network infrastructure. ISE 1.2 provides feature enrichment in terms of mobile device management, BYOD enhancements, and so on. It also performs noise suppression in log collection so customers have greater ability to store and analyze logs for a longer period.
Ali Mohammed is an escalation engineer with the Security Access and Mobility Product Group (SAMPG), providing support to all Cisco NAC and Cisco ISE installed base. Ali works on complicated recreations of customer issues and helps customers in resolving configuration, deployment, setup, and integration issues involving Cisco NAC and Cisco ISE products. Ali works on enhancing tools available in ISE/NAC that are required to help troubleshoot the product setup in customer environments. Ali has six and a half years of experience at Cisco and is CCIE certified in security (number 24130).
Remember to use the rating system to let Ali know if you have received an adequate response.
Because of the volume expected during this event, Ali might not be able to answer each question. Remember that you can continue the conversation on the Security community, sub-community shortly after the event. This event lasts through September 6, 2013. Visit this forum often to view responses to your questions and the questions of other community members.Hi Ali,
We currently have a two-node deployment running 1.1.3.124, as depicted in diagram:
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_010.html#ID89
Question 1:
After step 1 is done, node B becomes the new primary node.
What's the license impact at that stage, when the license is mainly tied to node A, the previous primary PAN?
Step 3 says to obtain a new license that's tied to both node A & node B, as if it's implying an issue would arise, if we leave node B as the primary PAN, instead of reverting back to node A.
=========
Question 2:
When step 1 is completed, node B runs 1.2, while node A runs 1.1.3.124.
Do both nodes still function as PSN nodes, and can service end users at that point? (before we proceed to step 2)
Both nodes are behind our ACE load balancer, and I'm trying to confirm the behavior during the upgrade, to determine when to take each node out of the load balancing serverfarm, to keep the service up and avoid an outage.
===========
Question 3:
According to the upgrade guide, we're supposed to perform a config backup from PAN & MnT nodes.
Is the config backup used only when we need to rollback from 1.2 to 1.1.3, or can it be used to restore config on 1.2?
It also says to record customizations & alert settings because after the upgrade to 1.2, these settings would change, and we would need to re-configure them.
Is this correct? That's a lot of screen shots we'll need to take; is there any way to avoid this?
It says: "
Disable services such as Guest, Profiler, Device Onboarding, and so on before upgrade and enable them after upgrade. Otherwise, you must add the guest users who are lost, and devices must be profiled and onboarded again."
Exactly how do you disable services? Disable all the authorization policies?
http://www.cisco.com/en/US/docs/security/ise/1.2/upgrade_guide/b_ise_upgrade_guide_chapter_01.html#reference_4EFE5E15B9854A648C9EF18D492B9105
==================
Question 4:
The 1.1 user guide says the maximum number of nodes in a node group was 4.
The 1.2 guide now says the maximum is 10.
Is there a hard limit on how many nodes can be in a node group?
We currently don't use node group, due to the lack of multicast support on the ACE-20.
Is it a big deal not to have one?
http://www.cisco.com/en/US/customer/docs/security/ise/1.2/user_guide/ise_dis_deploy.html#wp1230118
thanks,
Kevin -
Cisco Access Registrar 5 : What design or requirements for active/ active deploiement
Hi Every one
I want to install Cisco Access Registrar 5 on two different servers in active/ active design
What design or requirements for active/ active deploiement ?
Using Sun Solaris ? (i know using sun Sloaris i can have this mode of high availability BUT I PREFER INSTALLING IT ON RED HAT ENTERPRISE )
Using RED HAT ENTERPRISE on the two servers ? i wan to knew if i must use Vmware with the adequate licences (Vcenter) to provide FT fonctionnality for active / active Design ?
How i can use the replication to provide a complet active / active Design ?
Cordialement
Zammit IkbelIt depends what functionalities you want to use on CAR.
For example:
If only plain authentication is needed, you can install two servers independently and just configure replication between them (they just need IP visibility to replicate configuration). NAS clients can contact servers in round-robin or you can share load on two servers in some other way.
If you want CAR to perform session management and dynamic IP address allocation, than you need some cluster solution, as two servers must have synchronized state of sessions and consistent administration of addresses allocated from a pool.
Best regards,
Jasmina -
I would appreciate if any of you could provide me with links to relevant documents or information on what is new for BI 7.0..
One of my main intentions is finding out information on the changes in Process Change Monitoring. As you all know the issue with the current tools in BW(3.5) is that the if the chain doesn't start. Well is hard to find out promptly, and similar situation when activations hang ..... I was thinking in creating a custom tool, but I was told that BW 7.0 do provide tools to better monitor chains. Well if anyone has information on this I would appreciate .
Thank you
Alfonso.Hi ,
Check these links ,
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3604c604-0901-0010-f0aa-b37378495537">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3604c604-0901-0010-f0aa-b37378495537</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/48c0417951d117e10000000a155106/content.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/48c0417951d117e10000000a155106/content.htm</a>
<a href="/people/markus.kohler/blog/2006/06/07/welcome-to-my-new-netweaver-performance-blog:///people/markus.kohler/blog/2006/06/07/welcome-to-my-new-netweaver-performance-blog
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84</a>
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5ee3725b-0401-0010-e381-ac323362ce91</a>
Regards
Renjith Kumar -
Hi,
Any help?
Thanks
srabonHi,
SharePoint Server 2013 includes a wide variety of improvements and new features. Such as:
Support the tools designers use: Flexibility in Branding
Offline and Sync of My Site
Search Engine Optimization & Analytics is in Search
Content Search Web Part
Optimized mobile browser experience
Rich Workflows
Development gets more familiar
New App Model
Shredded Storage
Social Features: Activity feeds
Reference the following article:
SharePoint 2013 Top 10 New Features
What’s
new in Microsoft SharePoint Server 2013
Also a good book
by you can have a look:
Exploring
Microsoft SharePoint 2013: New Features & Functions
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support -
Photo editor app now available but doesn't work, after latest What's New update
hi all
odd experience what I wanted to highlight with you all.
I've just had an updated (this morning) to What's New build 3.0.A.0.2
After installing this patch / update, I was then told that "Photo Editor" was available to download. Build is 5.0.A.0.12
As far as I'm concerned I've not had this app on my phone before - checking in system apps reveals this is a fresh install, rather than an update to an existing app.
Also, I've not worked out how to run it, as there's no app shortcut on my homescreen. The app is not visible in the app picklist (when adding new items to my homescreens) either. Nor is the app in the main app list (accessed with the 6 dots button in the middle of the permanent shortcut panel on the homescreen).
I've even tried using a very useful app "quick shortcut maker" and although I can find photo editor in its activity list, when i test the generated shortcut, I get "unfortunately, photo editor has stopped".
Any ideas?
I do have some apps disabled, so does photo editor have any known dependencies?
EDIT: I've tried clearing photo editor data and restarting - no change.
Cheers,
Gary
Solved!
Go to Solution.Hi MyAliasIsGary
Photo Editor is a system app only, it is available for use when editing photo's through your Album or Photo's app. For example, if you go into Album > tap on a photo > tap the icon at the bottom that looks like a pencil on paper > tap Photo editor.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
What's New and What's Fixed in 2014.1
First, here are links to the two main documents about new features in the 2014.1 release:
Product Manager Al Mooney's blog: Premiere Pro CC 2014.1 Release
The What's New page in the Help: Adobe Premiere Pro Help | New features summary
(I'll review both of those documents ASAP to see if any little goodies got skipped.)
And now, the bugs that were fixed in this release:
Import
Import of CinemaDNG clip fails if the file has been renamed.
Gamma shift in some re-imported QuickTime IMX clips
Some QuickTime Reference files import without timecode.
Indexing of XDCAM clips can take an excessively long time, footage shows Media Pending until indexing completes.
XAVC-S files import without Timecode
Unable to import certain XDCAMHD 422 Long-GOP clips with Pixel Aspect Ratio of 0.7500 MXF
Spanned XDCAM HD422 clips not handled correctly if the clip names do not follow the normal convention
When a sequence is loaded from Media Browser to the Source Monitor and then inserted to a sequence without explicitly importing, two copies of the sequence are added to project.
Scaling values are not properly handled for clips/sequences imported via an XML file written by some shot management and conforming programs
If the reported duration of an XDCAM HD MXF clip shorter than the actual length in the file, then frames outside the stated duration can be accessed.
Some XAVC and XDCAM-IMX-MXF clips have audio noise introduced on playback
Some .mp4 have green frames and 'static' garbage when played in Source Monitor
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
PPro no longer recognizes timecode from a .qtc file, referenced from within a QuickTime reference movie.
Some XDCAM422 clips fail to import with generic error
Occasional crash on opening Source Settings for DNG footage, with 2nd monitor enabled
Overexposed white areas in some CinemaDNG footage display magenta artifacts.
When scrubbing C300 clips in Project panel’s Icon view, red frames sometimes show and Event panel reports error decoding frame.
If SpeedGrade was installed before Premiere, then double-clicking a prproj file launches SpeedGrade (Mac Only)
Growing Files
The last frames of some growing file are green. Must relaunch Premiere to correct the problem.
Importing a growing file can take an exceedingly long time, with footage showing as Media Pending
When a growing file refreshes, it stops voiceover recording
The incorrect timecode is shown in the Timecode Panel for growing files.
Timeline playback of growing files drops audio for about 1 second each time the growing file refreshes.
QuickTime reference files for growing files fail to import.
Export
When source is 120fps, export fails if Match Sequence Settings enabled
The Advanced XDCAM Settings section in Export Settings is blank for imported XDCAM presets
In QuickTime encodes, audio exported as uncompressed stereo imports into FCP as dual mono.
When you export to 5.1 AAC with the “Import into Project” option enabled, the resulting clip fails to import, throwing
“File import failure”
Image flicker is introduced in some constant-bitrate MPEG2 encodes
When the only variable blocking smart rendering is an adjustment layer, the effect(s) thereon are ignored and the segment is smart rendered.
ProRes media encoded by Premiere causes are not compatible with certain video QC programs.
AAF export: 88.2kHz and 96kHz audio clips exported to AAF do not appear in some audio production programs.
Audio EDL gets wrong source timecode if clip is nested or part of a multicam source sequence
EDL does not give correct Source In and Out for clips with speed reversed.
EDL does not give correct source in and out on reversed clips.
OMF export fails with some multicam sequences, reporting Audio Export Failure.
Hang during OMF export when the sequence contains a 5.1 audio track/clip.
Smart rendering can introduce black and red frames
Playback
Playback of IMX 50 clip freezes after 12 seconds.
With XDCAMHD and DVCProHD footage, frames are sometimes dropped though the render bar is green.
Audio for some mp4 files plays back at double speed
When pre-roll is set to 1 frame, timecode and video of XDCAM .mxf files are out of sync
Some DNxHD do not decode properly, resulting in frames being played out of order
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Audio
With Maintain Pitch enabled, no audio when playing at slower than real-time
Solo buttons in Audio Meters do not work for clips loaded into the Source Monitor
Mono and Standard track puck and tray panner routing for Ls, Rs, C and LFE channels do not adhere to ITU-R BR.1384 standard.
Occasional crash on switching a clip from mono to stereo via Modify>Audio Channels
5.1 channels are not properly mapped for some Dolby content.
5.1 clip changes to a 6 mono channel clip when “Extract Audio” or “Edit in Adobe Audition>Clip” is performed on a project item or track item.
Changes to Frame Rate via Interpret Footage are sometimes not applied to saved for all audio streams, causing most audio channels to be out of sync after closing/reloading project.
Constant Power audio transitions introduce buzz if either track item has zero channels (generally limited to multicam clips)
Crash on applying changes in Modify Audio Channels dialog [Mac Only]
Project Panel
Sorting by Duration is broken if the column has been moved during the current session
If the Project panel is filtered via Rapid Find when a bin is created, the edit control for naming the new bin does not become active automatically, and it cannot be activated manually until Rapid Find is cleared.
Project items cannot be deleted or renamed if the list view is scrolled to the right.
Project panel does not autoscroll to the left when a column is dragged to the right side of the Name column
When a timecode value is typed in the Video Out control for a clip in the Project panel, the value gets reduced by 2 frames upon committing the change
Subclip
When a soft subclip with only an Out Point set is edited into a sequence, the Subclip Start is ignored; the resulting track item extends all the way to Media Start.
The Media Start/End and Subclip Start/End times for subclips from a merged clip are incorrect
Editing/Timeline
3-Point edit: If the source is a sequence and only an Out Point is set for the source, the wrong segment gets inserted when KEM Roll is set to Insert as Individual Clips
Keyboard trim commands do not affect clips on targeted tracks that are outside of visible area of in the Timeline
Switching between sequences can turn the render bar red.
Frame Hold option doesn't generate the freeze frame when speed change is in effect
In the Timeline, the FX badge gets hidden when the clip is not wide enough to show the full clip name.
If the Left/Right Balance control is displayed in Timeline header, the balance will change if the mouse strays over the Header region during click-and-drag operations in the Timeline (such as trimming out)
'Select In to Out' selects clips on locked tracks.
Multicam
If time-remapping is used on a Multicam Source Sequence, the Program Monitor's multicam view continues to play at 100%; if source sequence was slowed, the Composite view goes black after the original end point.
When a multicam source sequence has been slowed down via speed change or time remapping, the extended of the clip goes black—no video
If the audio in a multicam sequence is selected when it is flattened, the audio is sometimes deleted.
Disabled multicam source clips are sometimes rendered to the composite output
The camera can be changed for a multicam clip on a locked track.
The overlay displays timecode in audio time units for part of a multicam sequence if the source clips are stereo and the MC sequence is mapped to mono
If a nested multicam sequence's duration has been increased via Time Remapping, then upon reaching the original end point during an editing pass, the composite view restarts from beginning
Flattening
If a multicam sequence’s audio is 5.1 or adaptive, then flattening deletes the audio.
Crash on flattening multicam clip with keyframed scale when using a camera angle that does not start at time zero.
Flattening multicam can remove some audio clips from the sequence.
Flattening a multicam sequence with reverse speed applied results in incorrect frames being used
Effects
AE Text Template] When text fields are active for editing, they’re not being visually highlighted
Adding mask points very close to each can result in the ordering of the points being incorrect
Incorrect scaling of 1920x1080 adjustment layers in 720 sequences
Unexpected behavior with Cross Dissolves between Adjustments Layers.
Applying both Echo & Levels effects to an adjustment layer causes video playback to freeze
Crash on rendering previews for a Lumetri filter in Software-Only mode.
Crash on deleting a clip from a sequence after pasting an effect mask to the clip.
JPG frame sequence gets scaled down if an adjustment layers is in effect above it [OpenCL only]
Rename GoPro lens distortion presets to include the camera name
Clip name effect doesn't work correctly if Source Track is set to a different track.
Crash on using Clip effect or Timecode effect on a transparent video.
Crash on loading or applying VST Effects (Mac only)
Intermittent Crash with Warp Stabilizer applied (AEVideoFilter)
The Clip Name effect does not work when applied to a transparent video track item, with Source Track set to a video clip.
Crash on applying audio transition to clips with overlapping timecode
Previewing fails when an adjustment layer has an animated mask applied to Opacity and any other video effect.
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Masking and Tracking
Shift-dragging a control point for an effect mask sometimes yields unexpected results
If a clip has an effect with a mask applied, moving the clip in the Timeline cause rendered preview files to be lost.
Previews rendered to a P2 codec are incorrect for the first 10-30 frames of an Opacity effect with mask applied
If a mask is applied to a GPU accelerated effect on an adjustment layer, the Program Monitor shows a cropped frame with Playback Resolution at Half and goes completely black at Quarter.
Opacity effect on Adjustment Layers fails to render within the mask with tracking.
After rendering an adjustment layer with multiple effects with masks applied, some of the effects are no longer confined within the mask [Mac only]
Crash on opening some projects with masking and tracking applied to effects
Direct Manipulation control fails to switch between multiple masks that are applied to the Opacity intrinsic effect.
3rd Party
Certain audio filters cannot be applied to a clip in a sequence that is imported via XML
PPro reports audio filter missing when opening a saved project with certain audio filters applied to the clips in a sequence that was imported via XML
Artifacts are introduced when using certain 3rd party transitions.
Certain 3rd party stabilizer plug-in are not working
Markers
On mouse-up after adjusting the Out point of a marker with duration, the playhead jumps to the marker's In point.
Video in Program Monitor strobes when dragging the In or Out point of a sequence marker
GPU
With GPU acceleration enabled, Gamma is being applied to some RAW media when it shouldn’t be.
Basic 3D effect can result in Program Monitor’s video overlay to become corrupted on some GPUs
Performance (Note: Most of these fixes are also listed under a product area)
Locking all Audio Tracks can significantly impair performance.
Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
Navigating through projects in multiple Media Browser panels impairs performance and can culminate in a crash
In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
Canon XF300 Footage has unacceptable performance for playback
.mp4 clips generated by certain transcoding programs exhibit poor playback performance
Interop
Crash on selecting Edit>Edit in Adobe Audition>Sequence...
When a 5.1 clip is sent to Audition via Edit Clip In Adobe Audition, the first channel is used for all channels.
Exporting from Audition to Premiere Pro opens Premiere, but the file fails to import
After grading a sequence in SpeedGrade, Premiere regenerates index & pek files
Miscellaneous
With some capture card hardware, captured uncompressed clips have the wrong field order
In the Overlay Settings dialog, the Track control is not properly constrained by the Property control.
A single preference flag is used for the "Import into Project" setting in the Export Settings dialog and the Export Frame dialog; they should be managed independently.
Custom scratch disk location for Video and Audio Preview folders get’s reset to default, “Same as Project File"
Changes to the label color cannot be undone.
In the Usage lists, all instance are ordered by track item start time; should sort by Sequence Name first, then by track item start
Automatic relinking fails in certain cases when the name of a folder in the relative paths are too similar. [Mac only]
With OpenCL GPU acceleration and Transmit enabled with some 3rd party I/O cards, the video on the output monitor is corrupted
Newly created projects sometimes have multiple Project Panels open.
And in closing, a request: If this post prompts you to think "Great, but what about..." or "Thanks, but I just found this new bug in 2014.1," please start a new thread--after, of course searching to see if there's already a topic on that issue.
[And Shooter, I apologize in advance if the foregoing contains any typos ;-)]Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh. -
FF 29 What's New/Committed to privacy page keeps opening
The What's New/Committed to privacy page keeps opening. Windows 7 for the OS. Things I have tried:
Delete user.js and prefs.js. Didn't fix the issue.
Set browser.startup.homepage_override.mstone to ignore both via about:config and directly editing prefs.js (one at a time, and both at the same time). Didn't fix the issue. It just overwrote that when FF opened the next time.
Set prefs.js to read only after changing the mstone setting. Same thing, it still opened even though the file was read only and said ignore.
This is not a home page issue. I don't have multiple home pages, the what's new page is not in my home page, I'm not saving open tabs, etc.
Here is my support info:
Application Basics
Name: Firefox
Version: 29.0.1
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:29.0) Gecko/20100101 Firefox/29.0
Crash Reports for the Last 3 Days
All Crash Reports
Extensions
Name: Adblock Plus
Version: 2.6.3
Enabled: true
ID: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
Name: Adblock Plus Pop-up Addon
Version: 0.9.2
Enabled: true
ID: [email protected]
Name: CS Lite Mod
Version: 1.4.9
Enabled: true
ID: [email protected]
Name: Download Status Bar
Version: 10.0.0
Enabled: true
ID: {6c28e999-e900-4635-a39d-b1ec90ba0c0f}
Name: Element Hiding Helper for Adblock Plus
Version: 1.3
Enabled: true
ID: [email protected]
Name: external IP
Version: 0.9.9.6
Enabled: true
ID: [email protected]
Name: FireFTP
Version: 2.0.19
Enabled: true
ID: {a7c6cf7f-112c-4500-a7ea-39801a327e5f}
Name: Forecastfox
Version: 2.2.4
Enabled: true
ID: {0538E3E3-7E9B-4d49-8831-A227C80A7AD3}
Name: IE Tab
Version: 4.0.20130422
Enabled: true
ID: {77b819fa-95ad-4f2c-ac7c-486b356188a9}
Name: IE View
Version: 1.5.6
Enabled: true
ID: {6e84150a-d526-41f1-a480-a67d3fed910d}
Name: Logitech SetPoint
Version: 6.5
Enabled: true
ID: {F003DA68-8256-4b37-A6C4-350FA04494DF}
Name: LogMeIn, Inc. Remote Access Plugin
Version: 1.0.0.1082
Enabled: true
ID: [email protected]
Name: NoScript
Version: 2.6.8.28
Enabled: true
ID: {73a6fe31-595d-460b-a920-fcc0f8843232}
Name: OpenDownload²
Version: 3.5.1
Enabled: true
ID: {210249CE-F888-11DD-B868-4CB456D89593}
Name: Password Exporter
Version: 1.2.1
Enabled: true
ID: {B17C1C5A-04B1-11DB-9804-B622A1EF5492}
Name: The Addon Bar (restored)
Version: 3.2
Enabled: true
ID: the-addon-bar@GeekInTraining-GiT
Name: WebEx Productivity Tools
Version: 2.0
Enabled: true
ID: [email protected]
Name: Windows Media Player Extension for Firefox
Version: 1.1
Enabled: true
ID: jid0-nRwp7VvCqZcSRTppwWz2npqGEKw@jetpack
Name: Xmarks
Version: 4.2.1
Enabled: true
ID: [email protected]
Name: YouTube High Definition
Version: 8.8
Enabled: true
ID: {7b1bf0b6-a1b9-42b0-b75d-252036438bdc}
Name: Download Statusbar
Version: 0.9.10
Enabled: false
ID: {D4DD63FA-01E4-46a7-B6B1-EDAB7D6AD389}
Name: Winamp Toolbar
Version: 5.6.20.9397
Enabled: false
ID: {0b38152b-1b20-484d-a11f-5e04a9b0661f}
Important Modified Preferences
accessibility.typeaheadfind.flashBar: 0
browser.cache.disk.capacity: 1048576
browser.cache.disk.smart_size_cached_value: 665600
browser.cache.disk.smart_size.first_run: false
browser.cache.disk.smart_size.use_old_max: false
browser.places.importBookmarksHTML: false
browser.places.smartBookmarksVersion: 6
browser.search.openintab: true
browser.search.useDBForOrder: true
browser.sessionstore.upgradeBackup.latestBuildID: 20140506152807
browser.startup.homepage: http://www.google.com
browser.startup.homepage_override.buildID: 20140506152807
browser.startup.homepage_override.mstone: 29.0.1
dom.max_chrome_script_run_time: 40
dom.max_script_run_time: 40
dom.mozApps.used: true
extensions.lastAppVersion: 29.0.1
font.internaluseonly.changed: false
gfx.direct3d.last_used_feature_level_idx: 0
gfx.direct3d.prefer_10_1: true
network.cookie.cookieBehavior: 2
network.cookie.prefsMigrated: true
network.protocol-handler.warn-external.dnupdate: false
places.database.lastMaintenance: 1402068187
places.history.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_bgcolor: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_bgimages: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_colorspace:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_command:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_downloadfonts: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_duplex: 4390961
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_edge_bottom: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_edge_left: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_edge_right: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_edge_top: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_evenpages: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_footercenter:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_footerleft: &PT
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_footerright: &D
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_headercenter:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_headerleft: &T
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_headerright: &U
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_in_color: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_margin_bottom: 0.5
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_margin_left: 0.5
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_margin_right: 0.5
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_margin_top: 0.5
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_oddpages: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_orientation: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_page_delay: 50
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_data: 1
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_height: 11.00
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_name:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_size_type: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_size_unit: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_paper_width: 8.50
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_plex_name:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_resolution: 4522037
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_resolution_name:
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_reversed: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_scaling: 1.00
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_shrink_to_fit: true
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_to_file: false
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_unwriteable_margin_bottom: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_unwriteable_margin_left: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_unwriteable_margin_right: 0
print.printer_HP_LJ300-400_color_MFP_M375-M475_PCL_6.print_unwriteable_margin_top: 0
privacy.sanitize.migrateFx3Prefs: true
security.mixed_content.block_active_content: false
security.warn_viewing_mixed: false
storage.vacuum.last.index: 1
storage.vacuum.last.places.sqlite: 1399787036
user.js Preferences
Your profile folder contains a user.js file, which includes preferences that were not created by Firefox.
Graphics
Adapter Description: NVIDIA Quadro K1000M
Adapter Description (GPU #2): Intel(R) HD Graphics 4000
Adapter Drivers: nvd3dumx,nvwgf2umx,nvwgf2umx nvd3dum,nvwgf2um,nvwgf2um
Adapter Drivers (GPU #2): igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
Adapter RAM: 2048
Adapter RAM (GPU #2): Unknown
ClearType Parameters: D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ] D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ] D [ Gamma: 2200 Pixel Structure: R ClearType Level: 100 Enhanced Contrast: 50 ]
Device ID: 0x0ffc
Device ID (GPU #2): 0x0166
Direct2D Enabled: true
DirectWrite Enabled: true (6.2.9200.16571)
Driver Date: 11-11-2013
Driver Date (GPU #2): 8-21-2012
Driver Version: 9.18.13.3182
Driver Version (GPU #2): 9.17.10.2843
GPU #2 Active: false
GPU Accelerated Windows: 1/1 Direct3D 10
Vendor ID: 0x10de
Vendor ID (GPU #2): 0x8086
WebGL Renderer: Google Inc. -- ANGLE (NVIDIA Quadro K1000M Direct3D9Ex vs_3_0 ps_3_0)
windowLayerManagerRemote: false
AzureCanvasBackend: direct2d
AzureContentBackend: direct2d
AzureFallbackCanvasBackend: cairo
AzureSkiaAccelerated: 0
JavaScript
Incremental GC: true
Accessibility
Activated: false
Prevent Accessibility: 0
Library Versions
NSPR
Expected minimum version: 4.10.3
Version in use: 4.10.3
NSS
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSMIME
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSSSL
Expected minimum version: 3.16 Basic ECC
Version in use: 3.16 Basic ECC
NSSUTIL
Expected minimum version: 3.16
Version in use: 3.16HI prospero63,
Thank you for your question, there is a new update going out today, version 30. IF the privacy page is set for your homepage you can change this, however in the new version this campaign is no longer on the start up. You can click do not show again as well.
Maybe you are looking for
-
How to call a screen in a new session -- Urgent
Hi all, I need to call a screen from another program in a new session, is it possible or not? if possible, please help me. After that when clicked on one button, session should automatically closed. waiting for valuable replies.... Thanks in Advance.
-
How can I get iPhoto '06 to quit? It refuses to quit.
You know that loud, wind instrument sound that plays that means, "Don't touch that button again because nothing will happen if you do"? Ever since late last night my iPhoto '06 has been scaring me off my last nerve with that sound. FIRST, it hid in t
-
PC Suite doesn´t connect to N80 IE after upgrade
I recently got the new N80 IE. Everything was fine using the version of PC Suite which comes with the phone. But after upgrading the the newest version, the USB cable connection doesn´t work anymore (using the phone as USB disk still works). There ar
-
Installing Windows XP on Satellite L40-114
I just bought a Satellite L40-114 for home and education. I just found out I need windows XP for some scientific applications and the VPN software for access, so I tried to install it. I was really disappointed Toshiba does not seem to deliver XP dri
-
Change invalid user password message
I need to customize the page when a user enters an invalid username or password. When a user enteres an invalid username or password I want to have the user to be in the same page with a message that says, "you entered an invalid username or password