What's new in MDS 2014

Hi ALL !
What's new in MDS 2014 ?
from Moscow with money

Hi,
I've spent a significant amount of time looking to answer this question for you. My conclusion is there is not a significant amount of difference between SQL 2012 and SQL 2014 surrounding Master Data Services.
The fact that that the following free publication does not mention MDS changes is evidence of this; -
Introducing Microsoft SQL Server 2014
Please also look at further links; -
What's New in SQL Server 2014
Important New Features in SQL Server 2014
Where was also a very significant change between MDS 2008 R2 and MDS 2012.
I hope this helps,
Kind Regards,
Kieran.
Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

Similar Messages

  • What's New and What's Fixed in 2014.1

    First, here are links to the two main documents about new features in the 2014.1 release:
    Product Manager Al Mooney's blog: Premiere Pro CC 2014.1 Release
    The What's New page in the Help: Adobe Premiere Pro Help | New features summary
    (I'll review both of those documents ASAP to see if any little goodies got skipped.)
    And now, the bugs that were fixed in this release:
    Import
    Import of CinemaDNG clip fails if the file has been renamed.
    Gamma shift in some re-imported QuickTime IMX clips
    Some QuickTime Reference files import without timecode.
    Indexing of XDCAM clips can take an excessively long time, footage shows Media Pending until indexing completes.
    XAVC-S files import without Timecode
    Unable to import certain XDCAMHD 422 Long-GOP clips with Pixel Aspect Ratio of 0.7500 MXF
    Spanned XDCAM HD422 clips not handled correctly if the clip names do not follow the normal convention
    When a sequence is loaded from Media Browser to the Source Monitor and then inserted to a sequence without explicitly importing, two copies of the sequence are added to project.
    Scaling values are not properly handled for clips/sequences imported via an XML file written by some shot management and conforming programs
    If the reported duration of an XDCAM HD MXF clip shorter than the actual length in the file, then frames outside the stated duration can be accessed.
    Some XAVC and XDCAM-IMX-MXF clips have audio noise introduced on playback
    Some .mp4 have green frames and 'static' garbage when played in Source Monitor
    Canon XF300 Footage has unacceptable performance for playback
    .mp4 clips generated by certain transcoding programs exhibit poor playback performance
    PPro no longer recognizes timecode from a .qtc file, referenced from within a QuickTime reference movie.
    Some XDCAM422 clips fail to import with generic error
    Occasional crash on opening Source Settings for DNG footage, with 2nd monitor enabled
    Overexposed white areas in some CinemaDNG footage display magenta artifacts.
    When scrubbing C300 clips in Project panel’s Icon view, red frames sometimes show and Event panel reports error decoding frame.
    If SpeedGrade was installed before Premiere, then double-clicking a prproj file launches SpeedGrade (Mac Only)
    Growing Files
    The last frames of some growing file are green. Must relaunch Premiere to correct the problem.
    Importing a growing file can take an exceedingly long time, with footage showing as Media Pending
    When a growing file refreshes, it stops voiceover recording
    The incorrect timecode is shown in the Timecode Panel for growing files.
    Timeline playback of growing files drops audio for about 1 second each time the growing file refreshes.
    QuickTime reference files for growing files fail to import.
    Export
    When source is 120fps, export fails if Match Sequence Settings enabled
    The Advanced XDCAM Settings section in Export Settings is blank for imported XDCAM presets
    In QuickTime encodes, audio exported as uncompressed stereo imports into FCP as dual mono.
    When you export to 5.1 AAC with the “Import into Project” option enabled, the resulting clip fails to import, throwing
    “File import failure”
    Image flicker is introduced in some constant-bitrate MPEG2 encodes
    When the only variable blocking smart rendering is an adjustment layer, the effect(s) thereon are ignored and the segment is smart rendered.
    ProRes media encoded by Premiere causes are not compatible with certain video QC programs.
    AAF export: 88.2kHz and 96kHz audio clips exported to AAF do not appear in some audio production programs.
    Audio EDL gets wrong source timecode if clip is nested or part of a multicam source sequence
    EDL does not give correct Source In and Out for clips with speed reversed.
    EDL does not give correct source in and out on reversed clips.
    OMF export fails with some multicam sequences, reporting Audio Export Failure.
    Hang during OMF export when the sequence contains a 5.1 audio track/clip.
    Smart rendering can introduce black and red frames
    Playback
    Playback of IMX 50 clip freezes after 12 seconds.
    With XDCAMHD and DVCProHD footage, frames are sometimes dropped though the render bar is green.
    Audio for some mp4 files plays back at double speed
    When pre-roll is set to 1 frame, timecode and video of XDCAM .mxf files are out of sync
    Some DNxHD do not decode properly, resulting in frames being played out of order
    Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
    Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
    Audio
    With Maintain Pitch enabled, no audio when playing at slower than real-time
    Solo buttons in Audio Meters do not work for clips loaded into the Source Monitor
    Mono and Standard track puck and tray panner routing for Ls, Rs, C and LFE channels do not adhere to ITU-R BR.1384 standard.
    Occasional crash on switching a clip from mono to stereo via Modify>Audio Channels
    5.1 channels are not properly mapped for some Dolby content.
    5.1 clip changes to a 6 mono channel clip when “Extract Audio” or “Edit in Adobe Audition>Clip” is performed on a project item or track item.
    Changes to Frame Rate via Interpret Footage are sometimes not applied to saved for all audio streams, causing most audio channels to be out of sync after closing/reloading project.
    Constant Power audio transitions introduce buzz if either track item has zero channels (generally limited to multicam clips)
    Crash on applying changes in Modify Audio Channels dialog [Mac Only]
    Project Panel
    Sorting by Duration is broken if the column has been moved during the current session
    If the Project panel is filtered via Rapid Find when a bin is created, the edit control for naming the new bin does not become active automatically, and it cannot be activated manually until Rapid Find is cleared.
    Project items cannot be deleted or renamed if the list view is scrolled to the right.
    Project panel does not autoscroll to the left when a column is dragged to the right side of the Name column
    When a timecode value is typed in the Video Out control for a clip in the Project panel, the value gets reduced by 2 frames upon committing the change
    Subclip
    When a soft subclip with only an Out Point set is edited into a sequence, the Subclip Start is ignored; the resulting track item extends all the way to Media Start.
    The Media Start/End and Subclip Start/End times for subclips from a merged clip are incorrect
    Editing/Timeline
    3-Point edit: If the source is a sequence and only an Out Point is set for the source, the wrong segment gets inserted when KEM Roll is set to Insert as Individual Clips
    Keyboard trim commands do not affect clips on targeted tracks that are outside of visible area of in the Timeline
    Switching between sequences can turn the render bar red.
    Frame Hold option doesn't generate the freeze frame when speed change is in effect
    In the Timeline, the FX badge gets hidden when the clip is not wide enough to show the full clip name.
    If the Left/Right Balance control is displayed in Timeline header, the balance will change if the mouse strays over the Header region during click-and-drag operations in the Timeline (such as trimming out)
    'Select In to Out' selects clips on locked tracks.
    Multicam
    If time-remapping is used on a Multicam Source Sequence, the Program Monitor's multicam view continues to play at 100%; if source sequence was slowed, the Composite view goes black after the original end point.
    When a multicam source sequence has been slowed down via speed change or time remapping, the extended of the clip goes black—no video
    If the audio in a multicam sequence is selected when it is flattened, the audio is sometimes deleted.
    Disabled multicam source clips are sometimes rendered to the composite output
    The camera can be changed for a multicam clip on a locked track.
    The overlay displays timecode in audio time units for part of a multicam sequence if the source clips are stereo and the MC sequence is mapped to mono
    If a nested multicam sequence's duration has been increased via Time Remapping, then upon reaching the original end point during an editing pass, the composite view restarts from beginning
    Flattening
    If a multicam sequence’s audio is 5.1 or adaptive, then flattening deletes the audio.
    Crash on flattening multicam clip with keyframed scale when using a camera angle that does not start at time zero.
    Flattening multicam can remove some audio clips from the sequence.
    Flattening a multicam sequence with reverse speed applied results in incorrect frames being used
    Effects
    AE Text Template] When text fields are active for editing, they’re not being visually highlighted
    Adding mask points very close to each can result in the ordering of the points being incorrect
    Incorrect scaling of 1920x1080 adjustment layers in 720 sequences
    Unexpected behavior with Cross Dissolves between Adjustments Layers.
    Applying both Echo & Levels effects to an adjustment layer causes video playback to freeze
    Crash on rendering previews for a Lumetri filter in Software-Only mode.
    Crash on deleting a clip from a sequence after pasting an effect mask to the clip.
    JPG frame sequence gets scaled down if an adjustment layers is in effect above it [OpenCL only]
    Rename GoPro lens distortion presets to include the camera name
    Clip name effect doesn't work correctly if Source Track is set to a different track.
    Crash on using Clip effect or Timecode effect on a transparent video.
    Crash on loading or applying VST Effects (Mac only)
    Intermittent Crash with Warp Stabilizer applied (AEVideoFilter)
    The Clip Name effect does not work when applied to a transparent video track item, with Source Track set to a video clip.
    Crash on applying audio transition to clips with overlapping timecode
    Previewing fails when an adjustment layer has an animated mask applied to Opacity and any other video effect.
    In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
    Masking and Tracking
    Shift-dragging a control point for an effect mask sometimes yields unexpected results
    If a clip has an effect with a mask applied, moving the clip in the Timeline cause rendered preview files to be lost.
    Previews rendered to a P2 codec are incorrect for the first 10-30 frames of an Opacity effect with mask applied
    If a mask is applied to a GPU accelerated effect on an adjustment layer, the Program Monitor shows a cropped frame with Playback Resolution at Half and goes completely black at Quarter.
    Opacity effect on Adjustment Layers fails to render within the mask with tracking.
    After rendering an adjustment layer with multiple effects with masks applied, some of the effects are no longer confined within the mask  [Mac only]
    Crash on opening some projects with masking and tracking applied to effects
    Direct Manipulation control fails to switch between multiple masks that are applied to the Opacity intrinsic effect.
    3rd Party
    Certain audio filters cannot be applied to a clip in a sequence that is imported via XML
    PPro reports audio filter missing when opening a saved project with certain audio filters applied to the clips in a sequence that was imported via XML
    Artifacts are introduced when using certain 3rd party transitions.
    Certain 3rd party stabilizer plug-in are not working
    Markers
    On mouse-up after adjusting the Out point of a marker with duration, the playhead jumps to the marker's In point.
    Video in Program Monitor strobes when dragging the In or Out point of a sequence marker
    GPU
    With GPU acceleration enabled, Gamma is being applied to some RAW media when it shouldn’t be.
    Basic 3D effect can result in Program Monitor’s video overlay to become corrupted on some GPUs
    Performance (Note: Most of these fixes are also listed under a product area)
    Locking all Audio Tracks can significantly impair performance.
    Performance of playback for some QuickTime is poor because they are unnecessarily falling back to QT32
    Dropped frames when playing R3D clips with RocketX enabled and Playback Resolution at ¼
    Navigating through projects in multiple Media Browser panels impairs performance and can culminate in a crash
    In Software-Only mode, rendering previews of the new Cross Dissolve is slower than the old one.
    Canon XF300 Footage has unacceptable performance for playback
    .mp4 clips generated by certain transcoding programs exhibit poor playback performance
    Interop
    Crash on selecting Edit>Edit in Adobe Audition>Sequence...
    When a 5.1 clip is sent to Audition via Edit Clip In Adobe Audition, the first channel is used for all channels.
    Exporting from Audition to Premiere Pro opens Premiere, but the file fails to import
    After grading a sequence in SpeedGrade, Premiere regenerates index & pek files
    Miscellaneous
    With some capture card hardware, captured uncompressed clips have the wrong field order
    In the Overlay Settings dialog, the Track control is not properly constrained by the Property control.
    A single preference flag is used for the "Import into Project" setting in the Export Settings dialog and the Export Frame dialog; they should be managed independently.
    Custom scratch disk location for Video and Audio Preview folders get’s reset to default, “Same as Project File"
    Changes to the label color cannot be undone.
    In the Usage lists, all instance are ordered by track item start time; should sort by Sequence Name first, then by track item start
    Automatic relinking fails in certain cases when the name of a folder in the relative paths are too similar. [Mac only]
    With OpenCL GPU acceleration and Transmit enabled with some 3rd party I/O cards, the video on the output monitor is corrupted
    Newly created projects sometimes have multiple Project Panels open.
    And in closing, a request: If this post prompts you to think "Great, but what about..." or "Thanks, but I just found this new bug in 2014.1," please start a new thread--after, of course searching to see if there's already a topic on that issue.
    [And Shooter, I apologize in advance if the foregoing contains any typos ;-)]

    Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
    Sadly, the following issue is NOT fixed for me. Is it with new projects only?  I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
    On the list above...
    Switching between sequences can turn the render bar red.
    This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
    1) Create two sequences with multiple short clips (the more clips the better)
    2) Make sure GPU acceleration is enabled.
    3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
    4) Hit SAVE.
    5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
    6) Toggle back to the original sequence and the delay occurs again.
    7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
    Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
    Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
    Sigh.

  • InDesign CC 2014 freezes on "What's New" window

    Dear All,
    InDesign CC 2014 is freezing up everything when it hangs on the "What's New" window which is completely a blank white.  I can't close the application or force quit or do anything else…I have to shut down the computer in order to quit the application or do anything else on the computer -- it is completely frozen.  When the computer restarts, InDesign CC 2014 automatically tries to start up again and freezes the computer unless I get to it before it launches and force quit before it gets a chance to freeze again. 
    InDesign CC is working normally, but I notice that when CC 2014 launches, it also launches InDesign CC with it and both seem to run at the same time.  This does not happen when I start from InDesign CC -- only that application is then active.
    "I'm also getting an Adobe warning that has begun to appear stating:  "Administrator rights are required to complete Adobe add-ons installation or removal" and I'm not sure which application this is referring to or how to log in for these "rights", 
    Anyone else having these issues?  I'm working on a Mac pro.
    Small Town Gal

    Sorry for not being clear. I did the fix in CC2014 and worked great.
    El 06/30/2014, a las 8:40, Small Town Gal <[email protected]> escribió:
    InDesign CC 2014 freezes on "What's New" window
    created by Small Town Gal in InDesign - View the full discussion
    Dear Alberto,
    I'm not sure what vernon you're now running?  Did the above fix work on the new InDesign 2014? or are you saying that InDesign CC is now working?  The suggested "fix" says to open the InDesign CC folder, so I'm wondering if deleting the "What's New" folder from InDesign CC actually also removes it from InDesign 2014?  and is a temporary fix for InDesign 2014, allowing it to finally launch?  Thanks.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6509465#6509465
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in InDesign by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • What's new in Photoshop CC 2014.2.1?

    What's new in Photoshop CC 2014.2.1?
    Is this updater Macintosh version only?

    Checking Google and All Adobe CC 2014 Updates: The Direct Download Links for Mac OS | ProDesignTools
    There is no 2014.2.1 except on pirate sites and I strongly urge you not to bother with them.
    These so far are the latest releases:
    Photoshop Help | New features summary

  • IllustratorCC 2014 What's New window

    Check out this crazy look I get on the "What's New" window in Illustrator2014!
    Any ideas?
    Using MacPro OS 10.7.5   2 x 2.66 Ghz Dual-Core Intel Xeon  8GB ram

    Thank you Yankee Rebel/Tony.
    I duplicated what you did, and it worked for me, too.
    I'd been having the same issue with my Mac Pro 1,1 (built Nov 2007), running Mac OS X 10.7.5 Lion, with ATI Radeon X1900 XT display card.
    Adobe staff member Sumit Sinh referred me to this discussion thread, of which yours was the final entry.
    Before finding this thread, I had created my own discussion (10/6/2014) here in the Adobe Communities:
    Has anyone else encountered a distorted/skewed Ai CC 2014 Welcome screen?
    https://forums.adobe.com/message/6805129#6805129
    My final entry in that discussion was this:
    Sumit, THANK YOU for your follow-up. It certainly is appreciated!
    I visited the thread you provided the link to (above) [https://forums.adobe.com/thread/1512827], and duplicated the steps described in the final entry, by Yankee Rebel on August 6, 2014, which is:
    Thanks for your response but the problem is no longer a factor. I went to Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/CEP/extensions and removed "com.illustrator.welcome" folder. That stopped it.
    I was having a seize-up problem in In-Design upon launch. It would boot but then freeze when the "welcome" screen popped up. I also deleted the welcome screen docs from In-Design in much the same manner as described just above for Illustrator. It then ceased to be a factor.
    A note about the navigation route (Applications/Adobe Illustrator CC 2014/Adobe Illustrator.app/Contents/MacOS/CEP/extensions):
    In case anyone else makes use of this, be aware that when you get to "Adobe Illustrator.app" you have to hold down the Control key when you click on the app. The Control key reveals, among other options, "Show Package Contents." Select that, and then the "Contents" folder; then follow the rest of the navigation directions.
    The above worked for me; no more Welcome window (distorted or otherwise).
    Although that window is desirable for its links to New Features, those can be accessed via Illustrator's main menu > Help > Illustrator Support Center. That will take you to the Illustrator CC page on the Adobe website, where you will see these links:
    "Overview," "What's New," "Learn & Support," and "Download."

  • What's new in Power Query January 2014 update?

    I just downloaded Power Query Version 2.9.3547.162 (January 2014) and I'm wondering what's new.
    The
    What's new in Power BI page does not display any news.
    Thanks!

    December is typically a slow month at Microsoft for all the obvious reasons. Because of that, we decided to focus on bug fixes and other product quality improvements. Over 250 product issues were fixed in this release.
    There were also significant improvements to the Text/CSV import experience to automatically detect column delimiters.
    One subtle change might take some getting-used-to -- or at least it did for me: the advanced editing dialog is now accessed from the "View" tab on the main editing dialog instead of being a mysterious button on the formula bar.

  • Adobe Story CC December 2014 release: What's New

    Hi,
    See this blog post for info on new features for Adobe Story CC 2014.2: Adobe Story CC December 2014 release: What’s New
    Thanks,
    Kevin

    Thank you. Any chance we can get Adobe to accept text other than English? letters in Polish or other languages appears as question marks "?", how come Celtx free let's me paste any text in and Adobe Story not. I'm not talking about dictionary/spell check support. All we need is for Adobe Story not to misbehave (with question marks) when we paste text from other languages. Coz,to let you know, there are films in other languages, really.

  • Is there a "What's New" workspace available for PS CC 2014?

    .

    No, but Help menu > What's New will link you to the New Features webpage.
    Photoshop Help | New features summary

  • How to connect new Macbook pro 2014 to iMac 2010 for a secondary display

    I have a new Macbook Pro 2014 and an old iMac 2010. How can I connect them to have an additional secondary display? I thought I would need a thunderbolt cable with a Thunderbolt to Mini DisplayPort adapter but I can't find that. There's lots of options and I don't understand what would be best.
    Macbook Pro 2014
    iMac 2010
    Any help would be much appreciated!

    Hi Nathaniel,
    Thunderbolt is another way of calling it a Mini Displayport, thunderbolt is just faster and has more usage with other products (i.e. hdds, displays etc.) You can hook up a thunderbolt to a mini-display port because both are the same size and serve the same function. Just don't connect anything to the display port on the iMac other than a computer.
    Kind Regards,
    Sidney Ramirez

  • What's New in SQL Server 2012 SP2

    Hi All,
    I can't find the page for "What's New in SQL Server 2012 SP2". Does anyone knows what features improved. Need to present to the Business for applying SP2.
    Thanks in advance.

    SQL Server 2012 Service Pack 2 is available - but there's a catch!
    http://sqlblog.com/blogs/aaron_bertrand/archive/2014/06/10/sql-server-2012-service-pack-2-is-available.aspx
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Premiere Pro CC and the New Mac Pro (2014)

    I'm expecting delivery soon of a new Mac Pro, nicely loaded, which I purchased mainly because of all the work I do with video. Yet, I read in a review that Adobe Premiere Pro isn't optimized to take advantage of the new Mac Pro, won't run faster, and I'm better off using Apple's Final Cut.
    1. Is this true?; and
    2. If so, will Premiere Pro be updated any time soon to run best on a 2014 Mac Pro?
    My new Mac Pro will have the following configuration:
    3.5GHz 6-core with 12MB of L3 cache
    32GB (4x8GB) of 1866MHz DDR3 ECC
    1TB PCIe-based flash storage
    Dual AMD FirePro D700 GPUs with 6GB of GDDR5 VRAM each

    My main problem is that when i export using gpu open gl it crashes hard boot the mac pro. A 3 min timeline with 4k footage n a bunch of color grading.  I get lucky if the timeline is shorter. But i think it is a gpu issue n my mac must be fixed. Currently under apple tech support. N my case is unique. No one has had the same issue and that makes it harder for me to figure the isse and to apple figure the issue.
    If i export using software only mercury then the export goes smoothe no mattrr how long. But that defeata the point of owning a mac pro with 2 GPUs
    Enviado desde mi iPhone
    El 29/03/2014, a las 01:51 p.m., BanksMeador <[email protected]> escribió:
    Re: Premiere Pro CC and the New Mac Pro (2014)
    created by BanksMeador in Premiere Pro - View the full discussion
    I have had my 12 core 2014 Mac Pro for a couple of weeks now, and I'm not very impressed with Premiere CC performance with 4K R3D on a 1920 x 1080 timeline.
    I understand that there may be an update soon that will take adantage of the CPU's and GPU's when it comes to the complex task of de-bayering the R3D footage, but it's just not there now.
    I get similar playback performance to what I experienced on my 09 Mac Pro tower.
    Any insights on getting better playback performance in this scenario would be greatly appreciated.
    Thanks!
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6253414#6253414
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6253414#6253414
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6253414#6253414. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Firefox 5 was released. But i dont know that what is new in this compared to firefox 4.0.

    I didn't see anything new.

    Think of Firefox 5.0 as both a security update in place of 4.0.2 and having had some work done also, something that minor releases generally do not get.
    http://www.mozilla.com/en-US/firefox/5.0/releasenotes/
    See the "What's New in Firefox" section.

  • Anyone know what is new in iTunes 6.0.3.5?

    iTunes 6.0.3.5 came out today (with no relesae notes).
    Anyone here know what's new in it?
    Fujitsu Lifebook P-2120   Windows XP  

    Just installed and had a quick look, nothing obviously different. However it seemd that updating iPod was faster (with 6.0.2 it seemed to pause while copying songs and take longer), also my 5G 30GB iPod moved past "do not disconnect" considerably faster after clicking Eject iPod.
    Using version 1.1 of the iPod software and have been since it was released so the improvement seems to be brought about by 6.0.3.5
    HP Compaq dx6120 P4 2.8 GHz 1GB RAM (BABYJANE)   Windows XP   iPod : 5G 30GB (BLANCHE) 512MB Shuffle (BARBARELLA)

  • What is new in iTunes 6.0.1

    hello to everybody! just noticed that apple has released a new version of itunes (6.0.1)
    does anyone know what's new about it?
    TY
    BO

    hi bo!
    some bugfixes over 6.0.0.18. no new features beyond those in 6.0.0.18. here's the Wikipedia changelog:
    http://en.wikipedia.org/wiki/ITunes/changelog
    love, b

  • What is new in Enhancement Package 2 and 3

    Hi all,
    The [ERP Solution Browser|http://solutionbrowser.erp.sap.fmpmedia.com/] is an excellent tool to find out, what's new. However I did not find any means to get a list of new features in ERP 6.0 enhancement packages 2 and 3. Any hint (especially what's new in HCM) is welcome!
    Regards
      Matthias

    Hello Matthias,
    check out Service Marketplace, alias ERP-EhP to find out what's being delivered as part of an Enhancement Package:
    http://service.sap.com/erp-ehp (logon required).
    Basically, it provides the following:
    link to SAP Enhancement Package Infocenter to understand the content based on functional domain, e.g. HCM.
    documentation on
    - EhP concept and strategy
    - overview presentation SAP ERP EhP 2 and 3
    - detailed presentation SAP ERP EhP 2 and 3
    - preview SAP ERP EhP4
    - how to implement EhP ("Must know guide for IT professionals")
    - test case templates
    - links to other useful resources (e.g. ERP solution map, media library, functional areas)
    Hope this helps!

Maybe you are looking for