What's New in Time Capsule firmware 7.4.1 upgrade from 7.3.2?

Is it worth upgrading the firmware on my home and work Time Capsules to the latest 7.4.1? What's new or known to be better in it?

The update seems to give you some but not all functionality of the "new" TimeCapsule that was announced a few days ago.
For instance you now have the ability to access your TimeCapsule remotely more easily than before if you are a MobileMe subscriber (you could access it before as well but needed additional services like DynDNS)
What is unfortunately not included is the new "Guest access" function.
I have not yet tested, if multiband access (accessing the TimeCapsule with devices of different WLAN modes) is also faster after the update (as advertised for the new TimeCapsule)
Regards
Konstantin

Similar Messages

Is the wifi faster in the new 3T time capsule (cylindrical) than the older 1T (flat box)?

I have a 4 year old 1T time capsule that is full (it's a flatter form factor). I am contemplating upgrading to a new 3T time capsule (cylindrical form factor). Aside from the extra storage, is there anything else better? Is the wifi data transfer faster?

The new Time Capsule features "ac" wireless capability.......2-3 times faster wireless than your current Time Capsule.....but in order to realize the benefit of "ac", your Mac needs to be capable of receiving an "ac" wireless signal.
If it's not, then you should expect about the same performance as you have now.
Both your older Time Capsule and the newer Time Capsule support Gigabit Ethernet, so the speed capabilites would be equal over a wired connection.

AirPort Time Capsule (firmware v7.7.3) has slow wifi connection to new Surface Pro 3

I got a new Surface Pro 3 i7. I have all the updates for it. I ran into a problem that many others also ran into which was very slow WiFi performance. I utilized many troubleshooting methods and sources and I am currently inclined to believe this... the new Marvell AVASTAR Wireless-AC Network Controller drivers are not compatible with my Airport Time Capsule firmware version 7.7.3.
Has anyone else experienced this?
Is there another firmware version that works (older or newer)?
Details:
I tried all kinds of things, like changing the network drivers on the SP3 to many different versions. Many of the help forums recommended using the drivers dated 4/24/2014. This did seem to help, but not reliably. What I discovered is... if I connect using the SP3 WiFi to my network extension Airport Express on version 7.6.4, I reliably get 20-22 mbps (which is the best I can expect from my network and works great for my needs). But, when I connect to my primary network Airport Time Capsule, the best I can get is 1.5 mbps, but usually between .15 and .9 mbps. It's completely unusable in today's internet environment. At the same time, I used my iPhone and the Airport Utility to verify the connections. I used SpeedTest.net on my MacBook, iPad, iPhone and Win8.1 HP laptop to verify that every other device was getting the 20+mbps. And they did. Only the Surface Pro 3 couldn't perform when using WiFi through the Airport Time Capsule. The SP3 does achieve 20+ mbps like all my other devices, but only when connected to the Airport Express.
The articles I read said that the network drivers on the SP3 seem to require the routers to be updated to the latest versions. Both the Airport Time Capsule and the Airport Express seem to be updated. When I go into their settings using the Airport Utility, there are no updates available.
Of course this problem isn't replicated at the Microsoft store since they don't have apple routers. So, their response is to upgrade the routers. Extremely unhelpful when the Apple software is saying it is upgraded already. I can't believe this new Airport Time Capsule has to be retired because it isn't playing well with others, and I love the automatic backup it is providing for my MacBook. So, somehow, I need the Airport Time Capsule to work with the new WiFi card & drivers on my SP3, just like the SP3 is working properly with the Airport Express.

Thanks for your input!
1. No downgrade. Bummer, but understandable.
2. Completely agree!!! I did too and then I had to redo it because I couldn't install a driver. I had to start all over and reinstall Win 8 then Win 8.1 over it. It was a colossal waste of time and endless frustration. If I can just get it modestly working, I'll take it. It doesn't have to be perfect right now.
3. Great suggestion! And the Microsoft forums are also a buzz. One suggestion I tried (and it seems to be working) is to set a separate wireless network name for the 5ghz band. I haven't thoroughly tested it yet, but I'm hopeful. I t seems to have worked for some, but not others. The next thing I'll try is fixing the channel, but strangely, I didn't see that option in the AirPort Utility app on my iPhone. Is it only available through Mac/PC laptop/desktop software?
4. Yup. Sigh. I actually have an old linksys. I retired it when I went 100% apple. I was hoping that things would work smoother. And they did! Until this SP3 came into my life. Arg.
And and a few more details...
the AirPort Time Capsule is 802.11ac
the AirPort Express is 802.11n (2nd gen)
I'm wondering if it is the AC connection that is the issue. Maybe since the Express always connects with n, it is OK....
Nope. Just tested the SP3 again and it is maintaining it's connection to the AirPort Time Capsule utiling the 802.11a/n/ac mode and connecting to the 5Ghz special network name. So far so good... Fingers crossed...

New 2TB Time Capsule: solid amber light, but TC working well...what's wrong?

Hi, I'm hoping someone can help me...thanks in advance for reading through this question!
I have a brand new 2TB Time Capsule, using it with the AT&T U-verse modem/router 3801 HGV.
After much consternation, I finally got the TC set up in bridge mode with the U-verse router.
The TV, phone, and internet are all working well through AT&T...and my wireless internet
connection through the TC is working great as well. Also, the TC is performing the first
back up of my MacBook Pro hard drive. Everything seems to be working great, I think.
However, I have some questions that I feel need to be addressed:
1- The light on the TC is solid AMBER, not green. When I check the connections in the Airport
Utility, all indicator lights on my screen are green, and the "dot" beside the TC icon is green.
Solid amber indicates that the "Time Capsule is completing its start-up sequence". I would expect
the start-up sequence to be completed long ago and the light to be green...and I can't find anything
wrong.
Any ideas as to why the light on the TC could be solid amber??
2- What should I do to get the light to be green??
3- I have no idea of the speed of the back-up, and what it should be. I have about 190GB of data
to back up. I totally understand that it takes many hourse for the first back-up. It looks like the
speed I'm seeing is changing frequently, and it's backed up about 3.5GB in about 20 minutes or so.
Is that a fairly "normal" speed?? I just want to make sure my configuration is good.
4- I'd like to set up a "guest" wireless network with an easier password...I had done it earlier when
the connections were not working and perhaps I accidentally removed it when updating to "bridge"
mode. To set up a new network, do I just write over the info in the fields when I get to "Wireless"
tab in the Airport Utility?? The info from my "home" network populates those fields now, and I
just don't want to risk overwriting the info and losing that network.
Does the TC "add" a new wireless network when I add new data in those fields...and SAVE the
original "home" network I created?? Just making sure!
Thanks to those who reply!
Chris

1- The light on the TC is solid AMBER, not green. When I check the connections in the Airport Utility, all indicator lights on my screen are green, and the "dot" beside the TC icon is green.
That is weird.. most TC I look at solid AMBER means the hard disk is dead. Not sure but since it is working it is no biggie.. there is some control over how the led functions.. but I doubt you can set the color different.
In other words.. not a clue.. if the TC is new take it to the genius and show them.. that is not the way it is supposed to work.
3- I have no idea of the speed of the back-up, and what it should be. I have about 190GB of data
to back up. I totally understand that it takes many hourse for the first back-up. It looks like the
speed I'm seeing is changing frequently, and it's backed up about 3.5GB in about 20 minutes or so.
Is that a fairly "normal" speed?? I just want to make sure my configuration is good.
Over wireless expect slow.. you did not state wireless or wired.. but those look like reasonable wireless speed. your files will load at different speed.. small files are slow.. larger files much faster.. it takes time to write the tables for many smaller files.
We always recommend first backup over ethernet.. even if the TC is pulled out of the network.
4- I'd like to set up a "guest" wireless network with an easier password...I had done it earlier when
the connections were not working and perhaps I accidentally removed it when updating to "bridge"
mode. To set up a new network, do I just write over the info in the fields when I get to "Wireless"
tab in the Airport Utility?? The info from my "home" network populates those fields now, and I
just don't want to risk overwriting the info and losing that network.
Guest network is removed as an option in bridge mode.. just use the uverse modem wireless for guest.

I want to replace my 1st generation time capsule with the new ac time capsule. What might I use the old 1st generation time capsule for

What use would there be for the 1st generation time capsule if I bought a new ac time capsule?

I just bought hte new ac time capsule (TC), and was using the 1st generation one at home.
=> I use now the old TC as an wifi extender and as a shared hard disk for family
=> the new TC is used with Time Machine for encrypted backup and first high speed network

My computer is macbook white with iOS 10. 6.8, will i able to use the new Airport Time Capsule 2TB and what does it mean administrate the Airport Time Capsule 2TB ?

my computer is macbook white with Mac OS X (10. 6.8), will i able to use the new Airport Time Capsule 2TB and work properly with Time Capsule on my computer to back up wirelessly?
And what does it mean "to administrate" because it was written in requirement of the Airport Time Capsule 2TB ?

You must use a Mac running Lion (10.7.5), Mountain Lion or Mavericks to be able to set up the Time Capsule and make any changes to the settings.
A recent version iPhone or iPad could also be used for this task.
From the Specifications on the Time Capsule:
Setup and Administration
iPhone, iPad, or iPod touch with iOS 6 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

I just did an Time Capsule firmware update and now my Time Capsule is dead. What happened?

I just did a Time Capsule firmware update and now my Time Capsule is dead. What happened?

tresbaileys wrote:
it may be important to note that when I put my ear to the box I can still hear the HD spinning (although no lights are lit and it doesn't show in the airport utility). Ideas??
That is very bad.. how old is it??
The Gen4 TC can die this way.. it is not usual but it happens.
Leave it for several hours to cool off. Do a factory reset immediately when you try to restart it.
The Factory Reset.
Power down the TC.
Hold in reset. and keep holding it in. Be Gentle! It is a tiny surface mount switch with a plastic lever.. Attempting to push it out the other side of the TC will not make the switch turn on better.
(I fix TC and have several reset levers bent over and jammed or broken off).
Power on the TC.. remember with the reset held in.. this needs three arms.. a friend or power switch you can get to with your feet..
Keep holding in reset for about 10sec until the front LED flashes rapidly.
Release reset and wait .. the boot will be slow as it deletes previous setting.. only from router side and pulls out the factory defaults. No files are deleted on the hard disk.. but the name of the TC may change.
Tell me exactly what the LEDs do throughout this process.
Both the main one at the front and the LED on the ethernet ports which should all flash during bootup.
If it is less than a year.. of course Apple will replace under warranty.. 2 years in some places.. Europe .. places with stronger consumer laws. If you have applecare on a computer it should still cover the TC.
I kind of doubt you are going to get this going again... but we can try.

How to connect New Airport Time Capsule to non Apple asdl router

Guys,
I have just purchased a new AirPort Time Capsule to back up the various macs in my house. I want to connect it to my wireless router which is a non apple product but the setup instructions are a little unclear to me.
My current router has simply a phone line connector and the power source coming into it. Do I simply connect an ethernet cable from the Airport to the Router. And if so, do I use the single Ethernet WAN port or one of the three Ethernet LAN ports on the rear of the airport? I assume the other end of the cable goes into any of the Ethernet slots on the back of my router which are marked 'Ethernet', or would it go into the socket marked 'Broadband WAN'?
Appreciate your help and if anyone is willing to speak on phone, I am very ahppy to call you in the next couple of hours! I am in the UK
Best, Anthony

thanks LaPastengue!
Here is what ive got
What ATT router do you have? Exact make and model please.
    gateway 2wire from at&t
What TC do you have.. Latest AC tall one?? Or older one?? If older. .please tell us the model number. A1409 for example from the base mat.
     yes I have the latest airport time capsule 2TB
Please tell us the full setup.. what is currently plugged into the main modem router??
     The Main modem route has an ethernet cord plugged in the other side of the cord is plugged into the phone      jack
Do not plug the TC in first.. plug a single ethernet TC to the computer.. Hmm. so I need an additional ethenet cord to plug the TC into the computer? Leaving the router plugged in as is?
Open the airport utility and change the TC to bridge mode.
https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-23706673-32722 6/450-411/bridgev6AU.png
Update the TC and then plug it into the ATT modem and plug it into your computer or use the wireless and then tell us what happens.

What is new in Nokia 6300 firmware v07.00

Hi I have just upgraded my Nokia 6300 to firmware v07.00. I can't notice any visible change with this new firmware. Can anyone put some light on what is new in Nokia 6300 firmware v07.00
Hyp3rion

After updating mine yesterday...da screen refreshes or so flickers every say 5 seconds...plz any help
i have reinstalled it three times... ..still no solution
Message Edited by prubyholl on 04-Dec-2008 07:20 PM

Moved my iTunes library to my new 2TB time capsule, now iTunes can't find the Time Capsule.

Had my iTunes library on my older 1TB Time Capsule. Just bought a 2TB Time Capsule. Moved all the music from the old to the new. But, iTunes tells me now it can't find the server. I've checked the location of the library on the iTunes preferences, to point iTunes to my server. I keep getting an error message that iTunes can't find my server. I've already added the folder on the server to my login preferences, like it was with the older Time Capsule.
I did everything exactly as before but now iTunes can't find my Time Capsule.
Should I have just pointed the login to the server and not the exact folder? I've been working on the solution for an hour now.. Please, can someone here help me?

What happens when you try to sync the iphone to the new computer?

Migrating to a new iMac, Time Capsule and external drive involved.

The family has gotten a lot of use out of the good old 2.16 iMac Core 2 Duo but it was time to upgrade. So now we have a 27” 3.2 iMac, 2x 4Gb, 1Tb of storage to migrate to.
The mess is this...
There are 4 users on the old iMac.
The old iMac is full to the brim, no room left on the HDD.
Some time ago I hooked it up to a WD 500GB external drive and moved each users music to the WD. In addition I moved the iPhoto libraries to the WD too.
Now it’s time to migrate and I’m not sure where to start. I do know where I want to end up though.
I want to move all the information that is spread across the old iMac HDD and the WD external drive to the new iMac...consolidate it back. To back things up I have a new 3Tb Time Capsule which will also wirelessly back up a Macbook Pro and a Macbook Air. For additional back up I also have a 2Tb G Tech external drive.
My thoughts are these.
Use the G Tech as a temporary bridge. Partition the drive, and back up the iMac to one side and the WD external to the other.
Then migrate the old iMac to the new iMac.
Then from the G Tech move the iPhoto libraries and the iTunes to the new iMac.
Questions I have:
There is a back up of the old iMac on the WD external that may have important information not stored on the old iMac internal drive. Is there a way to merge the files and keep the newest information and dump the redundant?
How do I ensure that my iPhoto libraries don’t get messed up? It seems that when even installing updates that now and then some thumbnails disappear.
How do I partition the Time Capsule for multiple machines?
What is the best use for the G Tech? Storage of photos and music or redundant back up of the Time Capsule?
I’m sure my post will generate as many questions as answers so I’ll stop here and see what shakes out. Thanks in advance for the input and responses.
Stuart

I'm ready to use Setup Assistant now but connectivity may be an issue. Pondini's recommends Firewire. The issue is I don't have a FW400-FW800 cable. USB is all I have that is common to all my devices. Is that even a consideration? Ethernet is an option between the two iMacs but Pondini seems to elude to Migration Assitant over Setup Assistant when using that connection. Am I confused on that issue?
Sources options
2006 iMac                         G-Tech
USB 2.0                            eSATA
Firewire 400                       Firewire 800
Ethernet                            USB 2.0
Destination
2013 iMac
USB 3.0 (2.0 compatible)
Thunderbolt
Ethernet

I set up a new airport time capsule. Most devices work fine however now my apple tv 2nd gen won't work.

I set up a new airport time capsule. Most devices connected fine however now my apple tv 2nd gen won't work. I turn it on and it searches for time and date but goes no further. I can't by pass it either. Any suggestions?

I can't by pass it either. Any suggestions?
Does that mean you cannot move it to the TC and plug in by ethernet? What does bypass mean?
I would still move it closer to the TC.. and just trial it there. Range on some AC models for 2.4ghz is worse than old one. For some people.
Another thing to try is fixed wireless channels.. one of the very few options still available in the AC model.. lock the 2.4ghz to 11, 6, 1 .. try it in that order.

Downgrading to 7.3.1 fixes time capsule firmware problem

Just in case some of you folks are still suffering with from time capsule firmware upgrade this post worked for me. First reset the time capsule by pushing the little button in the back for longer than 5 seconds. I also reinstalled the original tC software from the original disc.
open AirPort Utilities
2) select TC
3) select "configure manually"
4) to the right you'll see a popup menu with the current firmware 7.3.2
5) click this menu and select 7.3.1
6) go through all the following OKs etc., reboot TC and you're done

I upgraded to 7.3.2 and my wireless keeps coming and going on my Mac Book pro, with my old Mac Book it works like charm. When I switch to 802.11n only (5GHz) it works like charm on my Mac Book pro, but not with my old Mac Book apparently.
Where can I find the old 7.3.1 firmware. In the dropdown menu of Airport Utility there's only 7.3.2, but no 7.3.1. The download on the support site http://www.apple.com/support/downloads/timecapsuleandairportbasestation80211nfir mware731.htmldoesn't work, it says there's a newer version installed.
Where can I get only the 7.3.1 firmware, so that I can downgrade?

I've updated Time Capsule firmware and now can't print wirelessly

I have recently updated my Time Capsule to Firmware 7.6.2 and now my computer no longer sees my Brother MFC9320-CW either wirelessly or via ethernet. I am able to hook the printer up to the Time Capsule's USB port and print in that way.
The printer does not retrive a DHCP address either wired or wirelessly, and when I set it staticly, it still does not respond to a ping. I hope I'm barking up the right tree here, as the firmware update on the time capsule is the only thing I can think of (aside from a network card failure on the printer, which its diagnostics insist is not the case) that is causing this.
My next step will be to set up a test WiFi network with a third-party router to remove the printer (network card failure option) from the equation.

To Downgrade Your Time Capsule Firmware:
Open Airport Utility: Applications → Utilities → Airport Utility
Find your device in the left-hand column and select the “Manual Setup” button
In the “Summary” window that pops up click on the word “Version”
In the pop up box that comes up next to the “Upload Version” select the previous version
Click “OK”
Your Time Capsule will restart and be as good as new!

Hi I've recenty purchased a new imac time capsule airport express. I've set up a new network, rather than extended the current one. How do I change my new network to an extended one or create an extended network?

Hi I've recenty purchased a new imac + time capsule + airport express.
I've set up a new network, rather than extended the current one. How do I change my new network to an extended one or create an extended network?
Michael

detailed in terms of what focus?
here is a video guide about using the airport utility
http://www.youtube.com/watch?v=65Jv6m43eIE

What's New in Time Capsule firmware 7.4.1 upgrade from 7.3.2?

Similar Messages

Maybe you are looking for