What's new with 8.0.2 any Tiger issues ?

I've just downloaded the new update without checking here first.
This is what I could find for what's new in the update;
+This Logic Pro 8.0.2 update addresses specific customer and compatibility issues of Logic Pro 8.0. It includes Waveburner 1.5.2 and Impulse Response Utility 1.0.2, which address issues for Waveburner 1.5.2 and Impulse Response Utility 1.0 respectively .+
+If you are using Logic Node you will need to update your Logic Node application on connected computers as well. After running the updater you will find an updated Logic Node installer called Logic Node 8.0.2.dmg in your Utilities folder.+
+This update is recommended for all Logic Pro 8.0 users.+
+New in Waveburner 1.5.2 (included with Logic Pro 8.0.2 update)+
+Waveburner 1.5.2 addresses specific customer issues and improves Leopard compatibility of Waveburner 1.5.+
+This update is recommended for all Waveburner 1.5 users.+
+New in Impulse Response Utility 1.0.2 (included with Logic Pro 8.0.2 update)+
+Impulse Response Utility 1.0.2 addresses specific customer and compatibility issues of Impulse Response Utility 1.0.+
+This update is recommended for all Impulse Response Utility 1.0 users.+
Does anybody have anything to add to this?
It seem like it's mainly for Leopard issues so now perhaps I'll try putting it in my Leopard macbook.
My main concern though is are there any issues with Tiger ?
One post was complaining that 2G wasn't enough ram. 2Gigs has been fine for me. Is there any reason the update would be more ram intensive?
Thanks for any help>I hope to give lots of helpful stars;)

synesthesian wrote:
always reluctant to update, but was wondering how update is working with tiger?
please tell me they fixed the core audio overload problem. is anyone having any issues with update or is there any improvements
thanks
They did, at least now my sessions open and play the first time you play them.
My caveat : I always have a little empty "preroll" of about 1 second where Logic starts up, before hitting any audio or MIDI. This seems to work best, rather than start right at region starts.
I have noticed it keeps working throughout the day, before, sometimes I would have to restart it, to get it to work... ie the audio drivers would conk out if I left the computer idle for more than 5 minutes.
Cheers

Similar Messages

What is new with 6.0.4 (3) ? Anyone know?

What is new with this new version of iTunes 6.0.4 (3) - does anyone know?

The End, one thing that is new (perhaps unintentionally) is that 6.04 appears to fix the repair permissions bug that 6.02 and 6.03 suffered from.
best wishes
Andrew Platt

What's new with iTunes 6.0.2?

Usually the website says what the new features are, but not this time.

Still using Version 6.0.1. Seems to work good. Any reason I should upgrade to 6.0.2 or wait up for a while??
For Videos, I use Nero Recode to convert mp4, seems to work great, no loss of quality or sound.
Zimer1

What's new with CC expressions?

Just curious if there's any new controls exposed to expressions in AE CC? Has there been any change in expression performance?

Here is the complete list of what's new and changed:
http://blogs.adobe.com/aftereffects/2013/04/whats-new-changed-after-effects-next.html
There's nothing there about expressions.
However...
We are right now working on some improvements regarding expression performance and usability, and we hope to make some of these available soon.

What's wrong with this code. Any Help please?

Hello
I'm a newbie to java programming.I got this sample code from an online book that I use in learning java and I'm trying to run the code on eclipse but I got this error message
"Fatal exception occurred. Programm will exit."
This is the code:
public class MostDivisors {
     public static void main(String[] args) {
          int N;
          int maxDivisors;
          int numWithMax;
          maxDivisors = 1;
          numWithMax = 1;
          for(N = 2 ; N <= 10000 ; N++){
               int D;
               int divisorCount;
               divisorCount = 0;
               for(D=0; D <= N; D++){
                    if (N % D == 0)
                         divisorCount++;
               if (divisorCount > maxDivisors){
                    maxDivisors = divisorCount;
                    numWithMax = N;
          System.out.println("Among intergers between 1 and 10000,");
          System.out.println("The maximum number of divisors is "+maxDivisors);
          System.out.println("A number with " + maxDivisors + " divisors is ");
Any Help will be appreciated. Thank you all for helping me out understand the problem here

Thank you all participating to help this out.
This is the code and the detailed error message:
public class MostDivisors {
     public static void main(String[] args) {
          int N;
          int maxDivisors;
          int numWithMax;
          maxDivisors = 1;
          numWithMax = 1;
          for(N = 2 ; N <= 10000 ; N++){
               int D;
               int divisorCount;
               divisorCount = 0;
               for(D=0; D <= N; D++){
                    if (N % D == 0)
                         divisorCount++;
               if (divisorCount > maxDivisors){
                    maxDivisors = divisorCount;
                    numWithMax = N;
          System.out.println("Among intergers between 1 and 10000,");
          System.out.println("The maximum number of divisors is "+maxDivisors);
          System.out.println("A number with " + maxDivisors + " divisors is ");
ERROR MESSAGE starts HERE:
java.lang.ArithmeticException: / by zero
     at MostDivisors.main(MostDivisors.java:30)
Exception in thread "main"
I do not think this is related to the JVM because other programs will compile and run successfully.
Any Help will be appreciated. Thanks

What's new with the social network update 1.3..

Just installed the new 1.3.. update and was wondering what is new..

I also am 'unable to install.'
http://nmota.messaging.nokia.com/clients/Social_1_3_update.sisx
is a direct link to the file, but i cannot install it

Can I easily upgrade my 2.4 GHz Intel Core 2 Duo to the new quad intel i7? any compatibility issues?

Can I easily upgrade my 2.4 GHz Intel Core 2 Duo to the new Quad intel i7 processor? any compatibility issues?

Not only can it not be done easily... it can't be done at all. For starters, the processor is soldered to the logic board and it is not replaceable. However, even if the processor were removable, the new quad core i7 processor is not compatible with the chipset used in your current system. The new processors use an entirely new chipset. The new processors also have an integrated GPU on the processor. Your current chipset wouldn't have any idea how to deal with that. Basically... apart from the fact that you just can't remove the processor, there are a significant number of hardware incompatibilites between the new processors and the logic board in your current machine.

What is new with MAX 2.0 and is it compatible with Session Manager?

We added non-IVI instrument information in, basically the same structure as for IVI instruments,
into the ivi.ini file to keep all instrument information in the same place. Using MAX Version 1.1 caused no problems whatsoever and the system worked fine. With the advent of MAX 2.0 you seem to use ivi.ini as well as config.mxs to store instrument information. What we have found now is that given a working ivi.ini file from MAX 1.1, we end up with 2 or 3 copies of all the devices in the IVI Instruments->Devices section! When the duplicate entries are deleted and the application exited, the
ivi.ini file is updated minus the [Hardware->] sections which contain the resource descriptors that our appl
ications look for. As an added complication, under MAX 2.1 (From an evaluation of the Switch Executive) It behaves the same, except that it almost always crashes with one of the following errors. 'OLEChannelWnd Fatal Error', or 'Error#26 window.cpp line 10028 Labview Version 6.0.2' Once opened and closed MAX 2.1 will not open again! (Note we do not have LabVIEW on the system.) What is the relationship between the config.mxs and ivi.ini now? Also, your Session Manager application (for use with TestStand) extracts information from ivi.ini and may expect entries to be manually entered into ivi.ini (e.g. NISessionManager_Reset = True) i.e. Is the TestStand Session Manager compatible with MAX 2.0?

Brian,
The primary difference between MAX 1.1 and 2.x is that there is a new internal architecture. MAX 2.x synchronizes data between the config.mxs and the ivi.ini. The reason you're having trouble is that user-editing of the ivi.ini file is not supported with MAX 2.x.
Some better solutions to accomplish what you want:
1. Do as Mark Ireton suggested in his answer
2. Use the IVI Run-Time Configuration functions. They will allow you to dynamically configure your Logical Names, Virtual Instruments, Instrument Drivers, and Devices. You can then use your own format for storing and retrieving that information, and use the relevant pieces for each execution. You can find information on these functions in the IVI CVI Help file located in Start >> National I
nstruments >> IVI Driver Toolset folder. Go to the chapter on Run-time Initialization Configuration.
I strongly suggest #2, because those functions will continue to be supported in the future, while other mechanisms may not be.
--Bankim
Bankim Tejani
National Instruments

What's new with updated AppleintelCPUpowerManagement.kext file ? and why??

I found this on another site. In layman's terms can an someone tell me what this person is talking about
+The 10.5.6 has an updated AppleintelCPUpowerManagement.kext file that is not compatible con the on installed on 10.5.6 systems, so what happens is that the update system over writes that kext during the installation thus causing the system to freeze, so to fix it u have to re-run the update installation, but this time u will have the new kext installed in ur mac therefore the update should now run without any problem....interesting isn't+
thanks
I like to give out stars to all the helpful and generous folk that donate their knowledge in these forums

I guess this is to complicated a question;)

What's New with the New iPad

What makes it new? Is the shell different than the iPad 2 or is it the same? Also is the better screen the only new thing about it? Does it hold a lot of data or not that much? I just what to know some more about the new iPad. Thank you!!!
iPad

There is a comparison between the iPad 2 and the new iPad on this page : http://www.apple.com/ipad/compare/
New iPad : retina screen, improved cameras, quad-core graphics, 4G capability

Whats going on with my ipod nano any 1 plzz help me

does any 1 know y when i install itunes on to my pc(i have windows xp) my logo of my dvd rom drive disapears and i cant play any dvds or music cds or install any software its like the itunes and ipod software is stoping it from working plzzz help i donnt know whats going on

It wasn't designed to do it.

What's New With The V22?

I maybe missed it, but I can not find what new on the V22
Thanks!

AIR captive runtime in Android viewers
Instead of relying on AIR to be installed on Android devices, viewers now include a built-in version of AIR (3.2 or later). While this change increases the size of viewers from about 2 MB to 10 MB, it should improve stability and performance."
Does that mean that we could insert Flash content for the Android version of the FOLIOs ?

What's new with the 1.1.2 besides languages??

I just updated my iphone to 1.1.2 and I'd like to know everything that has changed insted of looking for them lol thanks and also what should i do if my iphone has NEVER adjusted to lower lighting, i always set it to automatic light control in settings and it adjusts from a dark screen to a lighter screen when the ambience around it is brighter, but when i turn off the lights and the abience becomes darker it does NOT adjust from a bright screen to a darker screen, I've reset it fully and done multiple soft resets thanks again

There's a big thread just one page back listing all the features in the new version. This link should take you directly there.
http://discussions.apple.com/thread.jspa?threadID=1236000&tstart=15

What's new with update

I just downloaded a huge update, what's changed?

I guess I should ask if you just installed OS X Lion. If so, and then you did a software update, there are several applications that received fairly large updates, but I don't recall FCP X on the list of updates that were made when I did the update. Perhaps you are set to do your software updates automatically and got some of those application updates. That would mean that Apple was providing updated applications to non-Lion users if so, but that could be the case.
stephen

What's wrong with the code?

public void run()
try
{     for(;;)
     mgr = (RTPManager)RTPManager.newInstance();
     mgr.addSessionListener(this);
     mgr.addReceiveStreamListener(this);
     try{ /*****port1 = port2 = 29261, which port is only used in here
     localAddr = new SessionAddress(InetAddress.getLocalHost(), port1);
     destAddr = new SessionAddress(ipAddr, port2);
     }catch(Exception e)
          System.out.println(e + " 4");
     try{
     mgr.initialize(localAddr);
     }catch(Exception e)
     System.out.println(e + " 5");
     //set buffer
     bc = (BufferControl)mgr.getControl("javax.media.control.BufferControl");
     if (bc != null)
     bc.setBufferLength(20);
     try{
          mgr.addTarget(destAddr);
     }catch(Exception e)
     System.out.println(e + " 2");
catch(Exception e)
     System.out.println(e+ " 3");
the error when i run the code is like that:
javax.media.rtp.InvalidSessionAddressException: Can't open local data port: 29261
5
java.io.IOException: Address already in use: Cannot bind 2
which means there is error in :
mgr.initialize(localAddr);
mgr.addTarget(destAddr);
But i don't know what's wrong with the code,
can any one help me?

I do not find any problem using the same ports for local and destination address with several unicasts. My problems are others.
But note that the error is even at constructing the localAddress, I mean before trying the destinationAddress. Thus the reason cannot be the former is already in use. In fact I think the later belongs to a remote hosts. Likely, it is trying to access the destinationAddress through the localAddress, but this has not been constructed properly.

What's new with 8.0.2 any Tiger issues ?

Similar Messages

Maybe you are looking for