What's problem with File Panel?

Hi All!
I'm web designer, while developing my site, my work is
breaking a problem with File management of DMX.
First, I develop site in DMX8 (ASP + SQL), then when I open
that site in DMXCS3 - Note: all file still in only one Folder in
HDD on (D\: Drive), (example: photo-editor.asp), this file content
is last time modify. And when I open again this file in DMX8 - the
file content of this file (photo-editor.asp) not same with new
version in DMXCS3. It is old version!.
I don't understand why that. (note: I don't check Enable
cache in Local info in Site Definition). Please help me about this
problem!
Thank for All!

Are both versions (DW8 and DWCS3) using the SAME local site?
Look in your
site definition in both versions of DW, and tell us what the
path is to the
local root folder, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"alonehero" <[email protected]> wrote in
message
news:fao4vg$n25$[email protected]..
> Hi All!
>
> I'm web designer, while developing my site, my work is
breaking a problem
> with
> File management of DMX.
>
> First, I develop site in DMX8 (ASP + SQL), then when I
open that site in
> DMXCS3 - Note: all file still in only one Folder in HDD
on (D\: Drive),
> (example: photo-editor.asp), this file content is last
time modify. And
> when I
> open again this file in DMX8 - the file content of this
file
> (photo-editor.asp)
> not same with new version in DMXCS3. It is old version!.
>
> I don't understand why that. (note: I don't check Enable
cache in Local
> info
> in Site Definition). Please help me about this problem!
>
> Thank for All!
>

Similar Messages

Problem with File panel and Local files

I am having a couple of problem using Dreamweaver (which may be related) and can’t find any appropriate help on the web site.
I have created a small website and have it up and running.    I’m now trying to do some minor modifications.     But Dreamweaver seems to have lost the address of my local files on my home computer (although files are still there in the same place.)     In the on-line training material it shows how to define where the root directory is when you start developing a site, but I can’t find where these setting are so I can check and if nessessary amend them.   If I go to Define Site from the Site drop down options, this does not allow me to check or define the root directory.
Secondly, in the File panel (lower right on the screen) the address bar at the top only shows the remote files and the icons to the right (“put”, “get”, etc) have disappeared and I can’t seem to get them back.   Also that lower panel seems to be floating rather than being fixed like it was.     I have tried clicking on Classic View in the Workspace layout options but this doesn’t move things back to how they were when I first started using Dreamweaver (just a few weeks ago).
Can you offer any advice on what the problem is and how to manage it? Many thanks.   I'm using Dreamweaver CS4 and an iMac.

Immediately below the Tabs saying "Files" and Assets" is a small box
with arrow on the right to show the drop down list.        In the box
on the right there's an icon of two networked computers. Then it
says, "ftp://Hill farm Web Site" which is the name of my website.
If I click on the arrows to pull up the drop-down box, I get four
options divided by a line.   Above the line the options are Computer,
HD and ftp://Hill farm Web Site. Below the line it says manage sites.
Below this is list of files that make up my website in a directory
structure.   The header for the first column reads, "Local Files",
which appears to be untrue, because the top line in the directory
structure below reads, "ftp://Hill farm Web Site".
Does this help?
regards
David

Unable to download from AppStore, updates,etc.Messages 'the installer is damaged' to 'there might be a problem with file ownership and permissions.' I am the owner and only user of a new MBP. What could be going on?

Is anyone having the same type of problems I'm having with Lion. I have a new MacBook Pro, received 7 weeks ago, preinstalled with Leopard 10.6.7. I didn't migrate anything from my old iMac, wanted a clean install from the Apple Store. While there, I asked for the upgrade to Lion 10.7, however their system was down.
I installed it myself, wirelessly about a week later, and Apple emailed me a receipt. Now, I've had to call support directly last week when I lost Mail, Address Book, was unable to open Preview or iTunes, among other problems. Seemed fixed after a session that baffled even the store tech. Now I am unable to download or install the recent Mac updates for Lion, from the App Store, could not install Adobe Reader, etc. Messages range from 'A network error has occured - Check your Internet connection and try again' to 'The Installer is damaged and cannot open the package. There may be a problem with file ownership or permissions.' All fail and I'll probably have to call Apple again. I am frustrated beyond words. Logs 'Install's runner tool is not properly configured as a setuid tool', domain errors, 'attempt to write a readonly database, and on and on. I have barely done a thing on this computer except search online for help with these problems. Safari gives me a 'You are not connected to the internet' too often. Diagnostics disagrees. I do see wi-fi problems in the forum. Disk and permissions were fine at the beginning of the earlier problems, checked first by support tech. I'm not sure if support tech even knew. I was just happy they were fixed. Anyone have these download and/or install problems after a 'clean bill of health' so to speak, only a week ago?

Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

I keep getting this diologue box as I start up Firefox "Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. ... what should I do exactly?

I keep getting the following dialogue box when I start Firefox " Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions." I am not sure how to find or change the profile directory. I have gone to the Options: General: Save files to ...box but it wont allow me to browse to another file and the box remains blank. ideas please!

See [[Could not initialize the browser security component]]
Continue here: [/questions/780717]

Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Problem with file access in other computer in jsp

I have problem with file accessing in other computer in jsp.
The follow code
File folder=new File("Z:"+File.separator+"sharefolder");//Z is a net share driver
File[] files=folder.listFiles();
System.out.println("test");
System.out.println("length="+files.length);
will throw exception at the second print.
but it works well in main funtion.
Is anybody know what is the problem.
JSP works on windows2003 server,tomcat 5.0.28 JDK1.4 net share folder on windows2000 server

no error code for this.But when I start tomcat I get the follow error.
java.lang.IllegalArgumentException: Document base Z:\ does not exist or is not a readable directory
     at org.apache.naming.resources.FileDirContext.setDocBase(FileDirContext.java:138)
     at org.apache.catalina.core.StandardContext.resourcesStart(StandardContext.java:3910)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4138)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
     at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
     at org.apache.commons.digester.Rule.end(Rule.java:276)
     at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
     at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.apache.commons.digester.Digester.parse(Digester.java:1567)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
     at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:480)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:425)
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error in resourceStart()
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Error getConfigured
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Context startup failed due to previous errors
Jun 5, 2006 6:55:41 PM org.apache.catalina.core.StandardContext start
SEVERE: Exception during cleanup after start failed
LifecycleException: Container StandardContext[msgstore] has not been started
     at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4466)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:823)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:807)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:595)
     at org.apache.catalina.core.StandardHostDeployer.addChild(StandardHostDeployer.java:903)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.commons.beanutils.MethodUtils.invokeMethod(MethodUtils.java:216)
     at org.apache.commons.digester.SetNextRule.end(SetNextRule.java:256)
     at org.apache.commons.digester.Rule.end(Rule.java:276)
     at org.apache.commons.digester.Digester.endElement(Digester.java:1058)
     at org.apache.catalina.util.CatalinaDigester.endElement(CatalinaDigester.java:76)
     at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanEndElement(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
     at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
     at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
     at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
     at org.apache.commons.digester.Digester.parse(Digester.java:1567)
     at org.apache.catalina.core.StandardHostDeployer.install(StandardHostDeployer.java:488)
     at org.apache.catalina.core.StandardHost.install(StandardHost.java:863)
     at org.apache.catalina.startup.HostConfig.deployDescriptors(HostConfig.java:483)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:427)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:983)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:349)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1091)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:789)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1083)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:478)
     at org.apache.catalina.core.StandardService.start(StandardService.java:480)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:2313)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:556)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:287)

NT security problems with file I/O

I have 2 problems with file I/O. When I read from a file I use the getAbsolutePath() method that is part of the File class to find what directory the files are currenlty. The problem is that the returned path says that the file is on the desktop no matter what directory the file really is in. The second problem is that I am unable to save files anywhere but the desktop. I must run the class files from the desktop too to get it to work.
I am using NT 4.0 for development. I'm guessing that these problems might be NT security related. Could someone help me?
Code below:
import java.awt.*;
import java.applet.*;
import java.net.*;
import java.io.File;
import java.awt.event.*;
//import java.security.*;
//import sun.security.*;
//import java.awt.Window;
//import com.ms.security.*;
public class Edit extends Applet implements ActionListener, ItemListener
String Gselect;
reader readit;
int mhz, khz;
TextField textField1;
String freq = "000.000";
String data;
Choice freqC;
Button ActivateB, SaveB, /*CancelB, HelpB,*/ DeleteB;
Checkbox SetC;
int NotUsedReply[] = new int[200];
int HwListReply[] = new int[200];
public void init()
readit = new reader();
String myFile="satellite.st1";
// myFile = myFile.concat(Gselect);
File satellite = new File(myFile);
textField1 = new TextField();
textField1.setText( "(void) " );
add( textField1 );
SetC = new Checkbox("TRAP-RX");
add(SetC);
SetC.addItemListener(this);
freqC = new Choice();
freqC.setSize(20,50);
freqC.add("000.000");
add(freqC);
freqC.addItemListener(this);
ActivateB = new Button("Activate");
add(ActivateB);
ActivateB.addActionListener(this);
SaveB = new Button("Save");
add(SaveB);
SaveB.addActionListener(this);
DeleteB = new Button("Delete");
add(DeleteB);
DeleteB.addActionListener(this);
     /*CancelB = new Button("Cancel");
add(CancelB);
CancelB.addActionListener(this);
     HelpB = new Button("Help");
add(HelpB);
HelpB.addActionListener(this);*/
//textField1.setText( data );
for(int a = 1; a < 9; a++)
data = readit.getData(satellite.getAbsolutePath(), a);//("E:\\forte4j\\system\\Projects\\Zebra\\satellite.st1", a);
freqC.addItem(data);
textField1.setText(satellite.getAbsolutePath() );
public void paint(Graphics g)
//g.drawString("Radio Setup Files",20, 20);
//g.drawString(getParameter("wse"),20, 20);
public void actionPerformed(ActionEvent event)
if(event.getSource() == ActivateB)
activator();
if(event.getSource() == SaveB)
/*if(event.getSource() == CancelB)
stop();
if(event.getSource() == HelpB)
if(event.getSource() == DeleteB)
public void itemStateChanged(ItemEvent e)
if(e.getItemSelectable() == SetC)
textField1.setText("Check box 1 clicked!");
if(e.getItemSelectable() == freqC)
freq = ((Choice)e.getItemSelectable()).getSelectedItem();
public void activator()
makeMHZ();
makeKHZ();
if(mhz > 254)
int StartLink[]={0x0c,0x01,0x07,0x00,0x00,0x00,0x00,0x00,0x00};          //New Link Proc Start
int TrapConfig[]={0x25,0x80,0x00,0x00,0x00,0xb7,0x00,0x0c,0x0b,          //TRAP Configuration
0x00,0x00,0x00,0xff,0xa0,0xff,0x0d,0xff,0xe8,
0xff,0x0d,0xff,0x00,0xff,0x15,0xff,0xb0,0xff,
0xff,0xff,0x94,0x0a,0x01,0x06,0x1a,0x00,0x0d,
0x2d,0x21};
TrapConfig[11]=(mhz-255);
TrapConfig[12]=(khz/5);
int SetUserOutput[]={0x41,0x42,0x49,0x54,0x52,0x41,0x50,0x20,0x34, //Sets User Output Format
0x35,0x34,0x35,0x30,0x30,0x2e,0x30,0x4e,0x30,
0x38,0x32,0x34,0x35,0x30,0x30,0x2e,0x30,0x57,
0x30,0x31,0x30,0x30,0x2e,0x30,0x30,0x4b,0x4d,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00};
sendget CmdFunc;
CmdFunc=new sendget();
try
//PolicyEngine.assertPermission(PermissionID.SYSTEM);
Socket h = new Socket("192.9.200.155",9000);
Socket s = new Socket("192.9.200.155",9001);
Socket t = new Socket("192.9.200.155",9002);
int j;
CmdFunc.SendCmd(h,0,0x01,null);
CmdFunc.GetCmd(h,HwListReply);
CmdFunc.SendCmd(s,9,0x1e,StartLink); //New Link Proc Start
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,37,0x00,TrapConfig); //TRAP Configuration
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,155,0x03,SetUserOutput);//Sets User Output Format
CmdFunc.GetCmd(s,NotUsedReply);
catch(Exception e){}
else
textField1.setText( "000.000 is the null choice. Try another." );
public void receiveText1( String select )
Gselect=select;
public void makeMHZ()
String y = freqC.getSelectedItem();
y = y.substring(0,3);
mhz = Integer.parseInt(y);
//textField1.setText( y );
public void makeKHZ()
String y = freqC.getSelectedItem();
y = y.substring(4,7);
khz = Integer.parseInt(y);
//textField1.setText( y );
import java.awt.*;
import java.applet.*;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
import java.awt.event.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class saver extends Applet implements ActionListener
String nameS = "Data.txt";
String dataS = "Default Data";
Button saveB;
public void init()
saveB = new Button("SaveFile");
add(saveB);
saveB.addActionListener(this);
public void actionPerformed(ActionEvent event)
if(event.getSource() == saveB)
RandomAccessFile RAF;
byte array0[] = dataS.getBytes();
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileWrite");
catch (Throwable cnfe)
try
RAF = new RandomAccessFile(nameS, "rw");
// RAF.writeUTF(dataS);
RAF.write(dataS.getBytes());
RAF.close();
catch(Exception e)
public void receiveND(String name, String data)
if(name != null)
nameS = name;
dataS=data;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
//import java.security.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class reader
//Signature sig;
public String getData(String filename, int pass)
//String nameS = "Data.txt";
String dataS = "Default Data Sucks";
String comma = ",";
int get = pass, count=0, top=0, bottom=0;
char[] work;
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileRead");
catch (Throwable cnfe)
try
//sig.sign();
//nameS = filename;
RandomAccessFile RAF = new RandomAccessFile(filename, "r");
// dataS = RAF.readUTF();
dataS = RAF.readLine();
RAF.close();
catch(Exception e)
return e.toString();
work = dataS.toCharArray();
for(int i = 0; i < dataS.length(); i++)
if( work[i] == ',' )
count++;
if(get == count)
bottom = i + 1;
if( (work[i] == ',') && (count > get) && (top == 0) )
top = i;
dataS = dataS.substring(bottom,top);
return dataS;
}

import java.awt.*;
import java.applet.*;
import java.net.*;
import java.io.File;
import java.awt.event.*;
//import java.security.*;
//import sun.security.*;
//import java.awt.Window;
//import com.ms.security.*;
public class Edit extends Applet implements ActionListener, ItemListener
String Gselect;
reader readit;
int mhz, khz;
TextField textField1;
String freq = "000.000";
String data;
Choice freqC;
Button ActivateB, SaveB, /*CancelB, HelpB,*/ DeleteB;
Checkbox SetC;
int NotUsedReply[] = new int[200];
int HwListReply[] = new int[200];
public void init()
readit = new reader();
String myFile="satellite.st1";
// myFile = myFile.concat(Gselect);
File satellite = new File(myFile);
textField1 = new TextField();
textField1.setText( "(void) " );
add( textField1 );
SetC = new Checkbox("TRAP-RX");
add(SetC);
SetC.addItemListener(this);
freqC = new Choice();
freqC.setSize(20,50);
freqC.add("000.000");
add(freqC);
freqC.addItemListener(this);
ActivateB = new Button("Activate");
add(ActivateB);
ActivateB.addActionListener(this);
SaveB = new Button("Save");
add(SaveB);
SaveB.addActionListener(this);
DeleteB = new Button("Delete");
add(DeleteB);
DeleteB.addActionListener(this);
/*CancelB = new Button("Cancel");
add(CancelB);
CancelB.addActionListener(this);
HelpB = new Button("Help");
add(HelpB);
HelpB.addActionListener(this);*/
//textField1.setText( data );
for(int a = 1; a < 9; a++)
data = readit.getData(satellite.getAbsolutePath(), a);//("E:\\forte4j\\system\\Projects\\Zebra\\satellite.st1", a);
freqC.addItem(data);
textField1.setText(satellite.getAbsolutePath() );
public void paint(Graphics g)
//g.drawString("Radio Setup Files",20, 20);
//g.drawString(getParameter("wse"),20, 20);
public void actionPerformed(ActionEvent event)
if(event.getSource() == ActivateB)
activator();
if(event.getSource() == SaveB)
/*if(event.getSource() == CancelB)
stop();
if(event.getSource() == HelpB)
if(event.getSource() == DeleteB)
public void itemStateChanged(ItemEvent e)
if(e.getItemSelectable() == SetC)
textField1.setText("Check box 1 clicked!");
if(e.getItemSelectable() == freqC)
freq = ((Choice)e.getItemSelectable()).getSelectedItem();
public void activator()
makeMHZ();
makeKHZ();
if(mhz > 254)
int StartLink[]={0x0c,0x01,0x07,0x00,0x00,0x00,0x00,0x00,0x00}; //New Link Proc Start
int TrapConfig[]={0x25,0x80,0x00,0x00,0x00,0xb7,0x00,0x0c,0x0b, //TRAP Configuration
0x00,0x00,0x00,0xff,0xa0,0xff,0x0d,0xff,0xe8,
0xff,0x0d,0xff,0x00,0xff,0x15,0xff,0xb0,0xff,
0xff,0xff,0x94,0x0a,0x01,0x06,0x1a,0x00,0x0d,
0x2d,0x21};
TrapConfig[11]=(mhz-255);
TrapConfig[12]=(khz/5);
int SetUserOutput[]={0x41,0x42,0x49,0x54,0x52,0x41,0x50,0x20,0x34, //Sets User Output Format
0x35,0x34,0x35,0x30,0x30,0x2e,0x30,0x4e,0x30,
0x38,0x32,0x34,0x35,0x30,0x30,0x2e,0x30,0x57,
0x30,0x31,0x30,0x30,0x2e,0x30,0x30,0x4b,0x4d,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00};
sendget CmdFunc;
CmdFunc=new sendget();
try
//PolicyEngine.assertPermission(PermissionID.SYSTEM);
Socket h = new Socket("192.9.200.155",9000);
Socket s = new Socket("192.9.200.155",9001);
Socket t = new Socket("192.9.200.155",9002);
int j;
CmdFunc.SendCmd(h,0,0x01,null);
CmdFunc.GetCmd(h,HwListReply);
CmdFunc.SendCmd(s,9,0x1e,StartLink); //New Link Proc Start
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,37,0x00,TrapConfig); //TRAP Configuration
CmdFunc.GetCmd(s,NotUsedReply);
CmdFunc.SendCmd(s,155,0x03,SetUserOutput);//Sets User Output Format
CmdFunc.GetCmd(s,NotUsedReply);
catch(Exception e){}
else
textField1.setText( "000.000 is the null choice. Try another." );
public void receiveText1( String select )
Gselect=select;
public void makeMHZ()
String y = freqC.getSelectedItem();
y = y.substring(0,3);
mhz = Integer.parseInt(y);
//textField1.setText( y );
public void makeKHZ()
String y = freqC.getSelectedItem();
y = y.substring(4,7);
khz = Integer.parseInt(y);
//textField1.setText( y );
import java.awt.*;
import java.applet.*;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
import java.awt.event.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class saver extends Applet implements ActionListener
String nameS = "Data.txt";
String dataS = "Default Data";
Button saveB;
public void init()
saveB = new Button("SaveFile");
add(saveB);
saveB.addActionListener(this);
public void actionPerformed(ActionEvent event)
if(event.getSource() == saveB)
RandomAccessFile RAF;
byte array0[] = dataS.getBytes();
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileWrite");
catch (Throwable cnfe)
try
RAF = new RandomAccessFile(nameS, "rw");
// RAF.writeUTF(dataS);
RAF.write(dataS.getBytes());
RAF.close();
catch(Exception e)
public void receiveND(String name, String data)
if(name != null)
nameS = name;
dataS=data;
import java.io.RandomAccessFile;
import java.io.FileNotFoundException;
import java.io.IOException;
import java.io.LineNumberReader;
//import java.security.*;
import com.ms.security.*;
import netscape.security.*;
import netscape.util.*;
public class reader
//Signature sig;
public String getData(String filename, int pass)
//String nameS = "Data.txt";
String dataS = "Default Data Sucks";
String comma = ",";
int get = pass, count=0, top=0, bottom=0;
char[] work;
try
if (Class.forName("com.ms.security.PolicyEngine") != null)
PolicyEngine.assertPermission(PermissionID.SYSTEM);
if(Class.forName("netscape.security.PrivilegeManager") != null)
netscape.security.PrivilegeManager.enablePrivilege("UniversalFileRead");
catch (Throwable cnfe)
try
//sig.sign();
//nameS = filename;
RandomAccessFile RAF = new RandomAccessFile(filename, "r");
// dataS = RAF.readUTF();
dataS = RAF.readLine();
RAF.close();
catch(Exception e)
return e.toString();
work = dataS.toCharArray();
for(int i = 0; i < dataS.length(); i++)
if( work == ',' )
count++;
if(get == count)
bottom = i + 1;
if( (work == ',') && (count > get) && (top == 0) )
top = i;
dataS = dataS.substring(bottom,top);
return dataS;

Problems with files saving in a quicktime format

I am having a problem with files from several programs in my adobe CS6 Master Collection saving in a quicktime format. I am running a Windows7 PC. It appears to be happening in both photoshop and fireworks from what I can tell. Does anybody have any idea why this is doing it and how to fix it?

Fireworks doesn't save or export in Quicktime format.

Problems with File Transfers Over Firewire 800

Problems with File Transfers Over Firewire 800.
Over the past month, I have had problems when transfering files from my harddrive, over Firewire 800 to a portable drive. I usually transfer very large files (20gb or more) to the portable drives for moving files around. When I drag a file over to copy onto a drive, the transfer starts normally. If I drag more files to copy over, the computer screen goes darker and a large icon comes up that looks like a power button icon. It tells me to restart, so I have to do a hard shut down on my G5. Weird. I also get the dark screen of death sometimes when I am transfering those large files and open another application to do some work while it's copying. It's killing me. I am having to sit here and wait for the transfer to finish before I can do anything.
Any thoughts...
Dual 2.7 GHz PowerPC G5
Mac OSX 10.4.3
Dual 2.7 GHz PowerPC G5 Mac OS X (10.4.3)

Have you run the Apple Hardware Test? Sounds like it could be a RAM problem.

I suddenly have this error message on FireFoxthis message pops up: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no re

I suddenly encounter this error message from Fire Fox.
Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.
I uninstalled the browser and download a new version but it does not resolve the issue.
I know my hard disc has ample space. I do NOT know where to find the Profile directory to fix the read restriction box.
== This happened ==
Every time Firefox opened
== After something about security add-on of Norton pop up by itself. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; MSN Optimized;US)

This link shows things to check - https://support.mozilla.com/kb/Could+not+initialize+the+browser+security+component

Why is Apple so bad at providing customers with information on what the problem with email is and what they are doing to fix it?

Why is apple not providing information on what the problem withe email is and what they are doing to fix, along with a time frame for fixing the problem.

It was because the problem was major. If you do not know tech, you should know that a two day outage usually indicates some type of virus, hack, or a bad software load that they had to unravel. The common way to solve that is to rebuild servers and put back into service. That takes time.
Apple did not want to admit this problem. My guess at this stange was that they loaded new software that might be associated with the new IOS and it crashed. To reveal this would be to cast into doubt their future revenue.
Either way. Run do not walk away from Icloud products and services. Apple has demonstrated they can not be a business partner.

Problem with File Based replication in Weblogic Express 10

Hi,
          We have Web application (exploded war) file deployed on Weblogic Express 10, to a Cluster of three Managed Servers (all three on different physical machines).
          We are using File based session persistance in weblogic.xml
          We have a shared location for all the three servers where we will be sharing the Session data.
          When we start the application, its works fine and is very fast, but after sometime the application slows down.
          Troubleshooting the Issue we found that its a problem with file based replication. By using File based replication every user session is stored in form of directory inside shared directory. So after sometime thousands of directories are created inside the shared directory where the session information is stored. So when we access the application, its waiting for lot of time with Message Session Monitor .... (this is because its browsing through the shared session storage directory for lot of time for session information as it has lot of directories) and finally after a long time like 10 mins we get the Application Home Page.
          When we clean up all the saved sessions inside shared directory, the application works fine, But we will see the same sometime later may be after 3 or 4 hours when the shared session directory has lot of session information stored in it.
          Is there a way to clean up the saved session information on file system as soon as that user session is closed by using file based replication.
          We cannot used Inmemory replication as our Appl doesnt support it.
          Please advice as it is a major show stopper in our Production Mirror env.
          Weblogic Consultant

It is possible to reduce number of live session by configuring very low timeout-secs weblogic.xml. Default is 60 minutes.
          More details are here..
          http://e-docs.bea.com/wls/docs100/webapp/weblogic_xml.html#wp1071982
          Jayesh
          Yagna Sys

Problem with file permissions

Hello all,
I am making a simple HttpServlet, which takes input
from html page and saves in to a file, but I'm having a
bit of a problem with file permissions.
I'm getting the following exception
java.security.AccessControlException: access denied (java.io.FilePermission ./data/result read)
     java.security.AccessControlContext.checkPermission(AccessControlContext.java:264)
     java.security.AccessController.checkPermission(AccessController.java:427)
     java.lang.SecurityManager.checkPermission(SecurityManager.java:532)
     java.lang.SecurityManager.checkRead(SecurityManager.java:871)
     java.io.File.exists(File.java:700)
     SyksyHTTPServlet.doPost(SyksyHTTPServlet.java:31)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
     sun.reflect.GeneratedMethodAccessor52.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:243)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:275)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:161)The exception seems to occur when I'm trying to check whether the file already
exists or not.
The data directory has all permissions (read, write and execute) set for all users,
and I have made an empty file called result inside the data directory for testing.
This file has read and write permissions enabled for all users.
Here's my code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.util.Enumeration;
import java.util.List;
import java.util.ArrayList;
public class SyksyHTTPServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          int totalCount = 0;
          List list;
          String song = request.getParameter("song");
          PrintWriter out = response.getWriter();
          File file = new File("./data/result");
          if(file.exists()) // this is line 31, which seems to cause the exception
               list = readFile(file);
          else
               file.createNewFile();
               list = new ArrayList();
          list.add(song);
          writeFile(file, list);
          for(int i = 0 ; i < list.size() ; i++)
               out.println(list.get(i));
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private List readFile(File file)
          List list = null;
          try
               FileInputStream fis = new FileInputStream(file);
               ObjectInputStream ois = new ObjectInputStream(fis);
               list = (ArrayList)ois.readObject();
               ois.close();
          catch(Exception e)
               e.printStackTrace();
          return list;
     private void writeFile(File file, List list)
          try
               FileOutputStream fos = new FileOutputStream(file);
               ObjectOutputStream oos = new ObjectOutputStream(fos);
               oos.writeObject(list);
               oos.flush();
               oos.close();
          catch(Exception e)
               e.printStackTrace();
}I'm using Tomcat 5.5 on Ubuntu Linux, if that has anything to do with this.
I'll appreciate all help.
kari-matti

Hello again.
I'm still having problems with this. I made
a simple servlet that reads from and writes
to text file. The reading part work fine on my
computer, but the writing doesn't, not even
an exception is thrown if the file exists that
I'm trying to write to. If I try to create a new
file I'll get an exception about file permissions.
I also asked a friend of mine to try this same
servlet on his windows computer and it works
as it should.
Here's the code
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class ReadServlet extends HttpServlet
     public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          String s = "";
          PrintWriter out = response.getWriter();
          String docroot = getServletContext().getRealPath( "/" );
          out.println("docroot: "+docroot);
          File file = new File(docroot+"test.txt");
          if(file.exists())
               s = readFile(file);
               out.println(s);
          else
               out.println("file not found");
               //file.createNewFile();                    // causes exception
               //out.println("new file created.");
          writeFile(file, "written by servlet");
          out.println("Now look in the file "+file.getPath());
          out.println("and see if it contains text 'written by servlet'");
     public void doGet(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
          doPost(request, response);
     private String readFile(File file)
          FileInputStream fis = null;
          BufferedInputStream bis = null;
          DataInputStream dis = null;
          String s = "";
          try
               fis = new FileInputStream(file);
               bis = new BufferedInputStream(fis);
               dis = new DataInputStream(bis);
               s = dis.readLine();
               fis.close();
               bis.close();
               dis.close();
          catch(Exception e)
               e.printStackTrace();
          return s;
     private void writeFile(File file, String s)
          FileOutputStream fos = null;
          BufferedOutputStream bos = null;
          DataOutputStream dos = null;
          try
               fos = new FileOutputStream(file);
               bos = new BufferedOutputStream(fos);
               dos = new DataOutputStream(bos);
               dos.writeChars(s);
               fos.flush();
               bos.flush();
               dos.flush();
               fos.close();
               bos.close();
               dos.close();
          catch(Exception e)
               e.printStackTrace();
}And if someone wants to test this servlet I can
give a war package.
Any advices?
kari-matti

What's problem with File Panel?

Similar Messages

Maybe you are looking for