What's the adminstrator password of refurbished router?

    I just bought a certified refurbished router EA6300 from Woot.com. When I first enter 192.168.1.1, it setup itself  and failed,(error code 2117), and suggests reset the router.  But after several resets, there no change . So  I enter 192.168.1.1 again and router needs  me inputing  password. The  strange thing is the adminstrator password not the "admin" wherever how many resets. It's refurbished router default  adminstrator password is not "admin" ? The label on the router back only have wifi password and no admin password. 
    It's my first time using  linksys router, Don't  know why.
    BTW, after  the first setup failed , my Android client can change the router  password and config the router, but the pc can't use the new password and restart no effects.

Reset the router and use the Linksys Smart Setup software to reconfigure the router. http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=28840

Similar Messages

  • HT1569 what is the network password for the  ios7

    what is the network password for the  ios7?

    There is no network password! If you want to connect to a wifi hotspot which is password protected, you have to contact the administrator of the hotspot in order to learn the password. If you are the administrator, you should contact the technician who plugged in your router.if you aren't asking that, let me know so that I can help you!
    Hope I helped!

  • Using WPA2, what is the longest password the iPhone will accept?

    Hi, I am using WPA2 security on my router and wondered what is the longest password the iPhone will accept when joining the network?
    I was going to go with a 64 bit key but it is quite long!
    Thanks in advance
    B

    Hi, I am using WPA2 security on my router and wondered what is the longest password the iPhone will accept when joining the network?
    I was going to go with a 64 bit key but it is quite long!
    Thanks in advance
    B

  • What is the default password for SDM in SP15

    Initial password for SDM
    Posted: Mar 22, 2006 2:40 PM    Reply 
    I have installed the SP15 SneakPreview. When i am trying to deploy a webdynpro application into portal from NWDS2.0.15, it is asking for SDM password.
    Can anyone please tell me what is the default password, because i dont remember providing any SDM password during the installation.
    I tried giving the Portal passwword, but it does not seem to work
    Thanks
    Sharath

    the default password is <b>admin</b>
    Here's the document that talks about it:
    <a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/419b479b-0801-0010-f8a1-c26208b4b209">Post-Installation Steps</a>

  • What is the warranty on a refurbished ipod touch

    What is the warranty on a refurbished ipod touch?

    Guaranteed Apple quality.
    Before we put a refurbished Mac, iPod, iPad, or Apple TV up for sale in Special Deals, it undergoes a rigorous refurbishment process to make sure it’s up to Apple’s tough quality standards. We back it with our standard one-year limited warranty. And you have the option of purchasing an AppleCare Protection Plan for it.
    http://store.apple.com/us/browse/home/specialdeals

  • Batch user creation - what is the initial password?

    Hello experts,
    I'm trying to import a list of users using the batch import (User Administration -> Import) as described here:
    [http://help.sap.com/saphelp_nwce711/helpdata/en/48/a8a834da282883e10000000a42189c/frameset.htm]
    I see that the users are created in the UME.
    What is the initial password for the newly created users?
    Can I specify this somehow?
    Best regards,
    Florian

    Hi Florian
    Please check the following link:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/22/41c43ac23cef2fe10000000a114084/content.htm
    and
    http://help.sap.com/SAPHELP_NW04S/helpdata/EN/f6/0edf3d0eb8af5ee10000000a114084/content.htm
    The link :
    http://help.sap.com/saphelp_nwce711/helpdata/en/48/a8a834da282883e10000000a42189c/frameset.htm
    itself contains ample info.Please go through the UME instructions.
    Regards
    Chen

  • What's the range of this new router from apple?

    what's the range of this new router from apple?

    One, it would help to specifiy which specific model/device.
    Two, reading the specs page for the device likely would answer the question.
    Three, what in the heck does this have to do with iTunes for Windows, the forum to which this silly question was posted?

  • X61s: What is the WKS_admin password?

    Dears,
    I bought a Thinkpad X61s tomorrow.
    When I turned on it for first time, the windows XP ask me the password for user WKS_admin.
     What is the WKS_Admin password?
     How I can change this password?
    Thanks!
    moderator note: The forum rules prohibit any password bypasses.  You'll need to get relief from the previous owner.  Locking thread.
    Message Edited by Agotthelf on 28-03-2009 04:03 PM

    is the default username "admin"?
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]..
    Nope.. sorry.
    Eric
    "fnord" <[email protected]> wrote in message
    news:3b3ce975$[email protected]..
    ack, is there no way to recover it in 6.0?
    "Eric Gross" <[email protected]> wrote in message
    news:[email protected]..
    It is what you set it to when you installed WebLogic.
    If WebLogic 6 then it is what you specified during the install
    process.
    >>>
    If WebLogic 4.5.1 or 5.1, then you can find it in theweblogic.properties
    as:
    weblogic.password.system=
    Regards,
    Eric
    "fnord" <[email protected]> wrote in message
    news:[email protected]..
    I'm trying unsuccessfully to get into my console -- what is the
    default
    password?

  • What is the default password after creating a user with wwsec_api.add_portal_user ?

    Hi,
    I created 850 Portal users with the WWSEC_API calls in PORTAL30 and PORTAL30_SSO. I can logon with an account if manually reset the password for a specific user. But what is the default password of a user after creating it with the API calls ? I tried "password" and the username, but that didn't work.

    The WWSEC_API should not be used to create the user account in the SSO schema. As you noted the WWSEC_API calls do not set the password - these are intended to be used only for setting up Portal profile information. For creating the user that can log in, use the Login Server APIs - in sso/ssoumgt.pks:
    WWSSO_APP_USER_ADMIN.CREATE_USER.

  • What is the warranty for a refurbished iPhone sold by AT&T?

    Considering purchasing a refurbished iPhone from AT&T. Curiously, I noticed refurbished iPhones are not sold online at the Apple Store...
    I'd like to know the official answer for this question, from an Apple representative, or at least referencing a legal document on the Apple site:
    "What is the warranty for a refurbished iPhone?"
    Also, "Can AppleCare be purchased for a refurbished iPhone?"
    Again, I would like Apple's answers to these questions, not AT&T's.
    Thanks.

    But if the phone is refurbished by Apple, shouldn't it have the same warranty as new, as do refurbished iPods, iPads, and Macbooks?
             Apple Certified Refurbished       
                    Fast, free shipping on all refurbished products.             
               We test and certify all Apple refurbished products and include a 1-year warranty."

  • What's the username & password when i connect device from cisco network assistant

    what's the username & password when i connect device from cisco network assistant?
    http://i200.photobucket.com/albums/aa273/wallfire02/Capture_zpsa8f5fd2b.jpg

    Although that may be true...
    If I click the "Connect As..." button it asks for a username and password.
    I've experienced connecting to other user's computers on a network.  To gain access to their computer, I just use their username and password.  I've done this before to transfer files without using a flash drive or burned disk. 
    I'm trying to find out what I'm supposed to log on as to gain access to this device...
         My point is that yes, I'm connected to it by wifi.  Otherwise it wouldn't show up; ha-ha! 
    Is my point really that hard to grasp?

  • What is the default password for Windows server r2?

    What is the default password for the evaluation copy of Windows 2012 R2?
    You can't log on and it wants to change the password , yet nothing works . 
    This is the non gui version.  About to format it and install the GUI version to see if it doesn't have this bug.
    Thanks

    I downloaded from MS on Friday. 
    It refuses to let me set a password or log on. Tomorrow I will blow it off and try the gui version to see if it's any better.

  • Need to know what is the default password for sysman

    Hi
    I just like to know what is the default
    password for "sysman" user in the Enterprise Manager version 2.1.
    thanks in advance
    null

    Venkil,
    The default password for sysman is oem_temp.
    Regards,
    John

  • WHAT IS THE DEFAULT PASSWORD FOR GUEST USER

    what is the default password for guest user?

    There is no default password for a guest user unless you've created one:
    (screenshot from the System Pref Guest User Pane)

  • HT1338 i bought an eMac that has been restored to the factory setting.  It runs os 10.4.11.  the default user is eMac.  What would the default password be?

    I bought an eMac tat has been restored to the factory settings. it runs on os 10.4.11.The default user is eMac. what would the factory password be?

    There is no default user or password; these are set up with the computer following the installation process. Ask the person who sold you the computer for it.
    (75864)

Maybe you are looking for

  • JDBC with MS Access for JSP

    Hi, I am facing a problem connecting to a MS Access file with JDBC in a JSP file. I spent a whole day and simplified my code. But, I can�t still figure it out. 1. Environment: Windows XP, Tomcat 5.5, MS Access 2003 2. I set up the ODBC data sources i

  • Row-level security and Oracle9iAS

    Hi! Does anybody know how to use RLS in J2EE application with Oracle9iAS? Can you please help me with patterns, documentation and examples? Can not find anything on it. I am using Oracle9iAS 9.0.3 and Oracle8i Thanks a lot in advance!

  • Errors in executing VI with a project

    Hello, The Vi file attached is running when it is not included in a project i.e when I run it separately. When I add it to a project on cRIO in FPGA mode it does not run. I get all the possible errors like 'Sub VI is not executable (for all sub VIs)'

  • PhotoShop Elelements 8 Organizer crashes.

    I bought this program this spring and starting using it late in August.  After putting all of my vacation pictures in and creating a slide show, I find that Organizer freezes and won't open.  I have  noticed thatng others have had the same problem an

  • Adding up Downloads excessively due to multiple rows in Tabular

    Hi All , We have fact table table which has data for Products that are taken down from the  App Store ,due to different reasons like App has risky key words , App has adult content etc  ...  We get the data from the staging table as below  As the "re