What's the average Virtual Machine density with RemoteFX?

We want to buy a new server for Hyper-V with the necessary hardware to run RemoteFx. The server we are considering is a HP BL460 G8 with a NVidia Grid K1. So we are quite interested to know how many VMs would this server be able to run on average.
We have zero experience with RemoteFx but quite a lot with Hyper-V, in a similar hardware (without the GPU) we are running around 40 VMs with no issue. But several desktops we are planning to exchange to a VDI environment needs better graphic performance
for AutoCAD, Corel Draw, Photoshop, Google Earth, etc.
Would the density be similar to our non RemoteFx experience?
Thanks,
Damian.-

Hi Damian,
In addition , to consider the Vedio Memory Please refer to following link:
http://blogs.msdn.com/b/rds/archive/2013/12/04/remotefx-vgpu-improvements-in-windows-server-2012-r2.aspx
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Installing the New Virtual Machine and XP Mode in Win7x64 on the Intel 2x E5-2620 Architecture (12 cores, 24 cpus)

I have been hibernating quietly at school with an Intel Core Duo T7300 on XP, and have been insulated from the madness of multi-core processors. I gather that there were problems with installing the XP Virtual Machine on Vista under Quad architectures,
but that these eventually got resolved in 2009.
The newer problem is concerned with installing the XP Virtual Machine on Win7x64 with greater than four cores in the cpu architecture. Others have mentioned this problem over this past Summer 2012. The problem is that at the very last step of
the complete install, Win7x64 reports a failure to install the XP Virtual Machine, and with no further comment.
Apparently KB/2519949 gave a temporary (MSFT qualifies this as "temporary") hotfix solution to this problem for AMD 8-core chips in the Bulldozer series. However MSFT cautions that this problem requires further research. This was earlier
this Summer 2012.
My problem is that I have an Intel 2xE5-2620 duo-processor cpu architecture (2x6=12 cores, 24 cpus in Windows). The cpu architecture is both Intel, and with far more than the old standard of four cores. The XP Virtual Machine in Win7x64 will
not install, as described above.
I have an armload of new 64-bit software all of which has installed pristinely in Win7x64 under this 2xE5-2620 Intel architecture. However, I have one very important piece of legacy (latest version incompatible beyond XP type of legacy) technical writing
software that is critical to my PhD thesis. In need the XP Virtual Machine for this, and I have no idea how to get it. My PhD thesis supervisor also needs this particular piece of "legacy" technical writing software for his new book on Probability
Theory.
1011::1000

I have news about this issue with XP Mode on Workstation machines. I have actually known about this for a couple of months, but it has not been until these Christmas 2012 holidays that I have had a chance to follow up with an implementation.
In review, I purchased a Workstation computer for scientific computation purposes this past August 2012. My chipset is an Intel 2x E5-2620 for a total of 12 cores, and it turns out that this was not the problem for XP Mode. My OEM shipped this
machine with Windows 7, but without XP Mode, and there is a reason why.
As an aside, it should be mentioned that the main line MSFT OS, Windows 7 or 8, is what I want for this machine, and not Server 2012. The reason is that most of the scientific computation and technical writing software that I use is written only for
Windows, and not for Server. Then also hopefully Hyper-V can do in Windows 8 most of what XP Mode is doing for me in Windows 7.
My dealer was able to tell me, when he got back from holidays in late September, that the reason that XP Mode failed to install on this Workstation, and the reason it was not included by the OEM, was that the original HDD configuration was for RAID (3 available
bays) and formatted for drives of at least 1TB in size. Although the original HDD installation was only a single HDD with only 500GB, the machine was equipped to have something much larger installed. But this format excluded the possibility of
XP Mode.
So we changed the hard drive installation to something that I preferred. We installed Windows 7 on a 480GB SSD, and I installed all my software on this drive, as well as all my important data. Most importantly, since this drive is less than 1TB,
we could use the MBR format which allows XP mode. Then we also formatted the original HDD of 500GB in MBR, and decided to run it with Intel RST. This second drive is for unimportant data, and large files. For backup we chose a 2TB USB 3.0
external. In this setting, installing Windows XP Mode was easy, as the only thing we needed to do was modify BIOS to enable virtualization which was part of the Intel 2x E5-2620 chipset already.
I am very pleased with XP Mode. The scientific writing software for my thesis that I was worried about does actually run in Windows 7 under compatibility mode, but there have been some huge advantages to installing in in XP Mode as well. I still have licensed
copies of Office 2003, Acrobat Pro 9, and MathType 5.2, and other old software as well. I now have all new software, for example Office 2010 (64-bit), Acrobat Pro 10 (32-bit for 64-bit), and MathType 6.8 (64-bit), and lots of other things. However, now that
I have my scientific wrtiting software (for which the maker has not caught up with Windows Vista/7) installed in XP Mode, I have also installed WORD 2003 with MathType 5.2 in XP Mode. My scientific writing software can translate WORD 2003/MathType 5.2 in RTF
format to LaTeX. So lets hope these guys eventually catch up with Windows 7 and 8.
I am also using XP Mode to archive a large block of my old data from the XP days. I still have licensed copies of the out of date software. And I would rather not update every single old file I have to a current format. So altogether, XP Mode is working
out quite well. It is very fast with my Intel 2x E5-2620 and maximum RAM.
1011::1000
1011::1000

Could not create the Java virtual machine What happen?

all,good day!
i use tomcat7 and JRockit JVM;
tomcat7 version info:
Server version: Apache Tomcat/7.0.27
Server built: Mar 31 2012 03:43:36
Server number: 7.0.27.0
OS Name: Linux
OS Version: 2.6.32-220.el6.x86_64
Architecture: amd64
JVM Version: 1.6.0_02-b05
JVM Vendor: BEA Systems, Inc.
JRockit JVM version info:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.2-7-148152-1.6.0_29-20111221-2104-linux-x86_64, compiled mode)
in R28 jrdoc ,The -XgcPrio option is deprecated in Oracle JRockit R28. The option works in R28, but Oracle recommends that you use -Xgc instead. For more information, see -Xgc;
in -Xgc option info lists the garbage collection modes that i can specify with the -Xgc option. pausetime mode in which the option；
but，but，i use -Xgc:pausetime in my tomcat7;tomcat startup error:
The configuration of the JVM attributes in Tomcat in catalina.sh
export JAVA_OPTS="-server -Xms25G -Xmx25G -XgcPrio:pausetime -XpauseTarget=200"
the error info:
[ERROR] Argument error: -Xgc:pausetime
[ERROR] pausetime is not a valid garbage collector name for -Xgc.
Valid options are: singlecon, gencon, genpar or parallel (singlepar).
[WARN ] No unit entered for pause time target, assuming ms.
Could not create the Java virtual machine.
what's wrong in my configuration ?
Edited by: 944618 on 2012-7-5 上午4:26

I would add the jvm flag -showversion next to the -Xgc:pausetime flag, so you will see which JVM you're actually running.
Also, the following part of your post is a bit inconsistent, which jvm flag are you actally using?
"but，but，i use -Xgc:pausetime in my tomcat7;tomcat startup error:
The configuration of the JVM attributes in Tomcat in catalina.sh
export JAVA_OPTS="-server -Xms25G -Xmx25G -XgcPrio:pausetime -XpauseTarget=200"
the error info:
[ERROR] Argument error: -Xgc:pausetime"
The error output you posted looks like the error you would get from a R27 version of JRockit.

Installation fails with "Cannot launch the Java Virtual Machine"

I'm trying to install OAS 10.1.3.1. on Windows XPbut after copying all the files the installer starts complaining that it cannot lauch the Java Virtual Machine. Eventually, the process gets to the configuration step where it succeeds with one configuration, then fails with the next, and then finally goes into an eternal loop.
When launching the installer it claims that my environment successfully passes all test for memory size, etc.
Is this a known problem? Is there any way I can get more info about the reason why the JVM could not get lauched? I searched for information in the logs without success. I also tried to play around with the PATH environment variable since I saw some installation note saying that includingthe jre/bin path here could help, but it did not help.
Could anyone, please, give me a hint of how to complete the installation successfully?

Thanks for the hint.
I had a look in the INI-file of my BPEL installation and this is what it said about memory:
JRE_MEMORY_OPTIONS=" -mx256m"
Still, if I start the BPEL server it finally comes up after issuing a lot of complaints but as soon as I request a page I get this:
500 Internal Server Error
OracleJSP: oracle.jsp.provider.JspCompileException:
Fel vid kompilering:C:\product\10.1.3.1\OraBPEL_1\bpel\system\appserver\oc4j\j2ee\home\application-deployments\orabpel\console_war\persistence\_pages\\_login.java
Could not create the Java virtual machine.
Error occurred during initialization of VM
Could not reserve enough space for object heapThis is strange since at the time there is >1.4 GB of virtual memory and 0.9 GB of physical memory available.
And according to the task manager:
Commit charge limit = 2728684
Physical memory total = 2096496
I am using Windows XP Professional, version 2002, service pack 2.

Install of SAP HANA Studio Dev Ed v1.00.80 fails with "Could not create the Java Virtual Machine"

Hello,
Scope: JVM error during initial install of SAP HANA Studio Developer Edition v1.00.80, Win86/32bit
Source: installation files pulled from HANA Studio tab at https://hanadeveditionsapicl.hana.ondemand.com/hanadevedition/, which is a link from the main HANA site of http://scn.sap.com/community/developer-center/hana. zip folder: "sap_hana_win32_studio_rev80"
Targeted O/S: Windows 7, 32-bit, local Java is SE 7, update 67.   Java environment has been confirmed via checks provided at http://www.java.com/en/download/manual.jsp
Actions taken:
Attempted to update the installation's eclipse.ini file by reducing the -Xmx value; see details below.
Read thru postings such as http://scn.sap.com/thread/3390626 and the threads it recommended.
Checked OSS (ie Note 1859686 - HANA Studio does not start)
Description of installation error:
Shortly after executing "hdbinst", it fails with the error "Could not create the Java Virtual Machine". I've verified that there is nearly 3G of memory free. What I did notice, as shown in the attached files, is that Eclipse is part of this installation and it's pre-loaded with the "eclipse.ini". I firmly believe the solution could be to reduce parameter "-Xmx1024m" to "-Xmx512m" but it's a catch-22 because even after updating eclipse.ini (in installation folder C:\Program Files\SAP\hdbstudio\tmp_p2director2014.08.13_13.36.44\director), the install program requires that the "hdbstudio" folder to be empty upon restarting it.
Since the installation is basically a package with a lot of .jar files, there is no eclipse.ini file available in the source install folder; otherwise, updating it there would be the easiest solution if that option were available. The file is only available in the targeted deployment folder above.
If you have encountered this same error and were able to resolve it, I would be grateful to know of your solution. Thanks very much.
FYI: the HANA Client installed with no issues.
Jim Cleek
FYI: the images below reflect the sequence of images produced during the installation.
after clicking OK above, the screen below gets updated (see the "is not empty" msg).
Below is the eclipse.ini file located in the deployed/target folder:
Message was edited by: Jim Cleek
FYI: Using information from the SAP HANA Database - Studio Installation and Update Guide, I tried to override the installation's use of its eclipse.ini file by passing my own modified version (with "-Xmx512m") of that file that was placed in a separate folder. The cmd used via DOS window was "hdbsetup.exe -a studio --configfile=C:\Users\Admin\Downloads\eclipse.ini" and even though it successfully launched the SAP HANA Lifecycle Management gui, it failed on the first step with the same JVM create error as above because it appears to have used its own eclipse.ini file, which has "-Xmx1024m".

Update: a message was opened with SAP but unfortunately they could not provide a resolution for this particular scenario. They admitted that the eclipse.ini file cannot be updated since it is bundled as part of the installation package. One point to make that I did not make before was that this was being attempted on an Oracle VirtualBox (4.3.10); the SAP HANA contact said he assumed that SAP has not tested this particular scenario, thus it could not be supported.
Resolution: the end result was to abort trying to install SAP HANA Client and Studio on the Oracle VirtualBox but to install it locally on my own desktop, which runs on Windows 7 Enterprise 64-bit with 8G of memory. The SAP HANA files below were downloaded, extracted and installed successfully in the order shown.
FYI: the Studio installation detected that a 64-bit version of Java was not installed so I installed that and then adjusted the User environmental variable JAVA_HOME to point to that new path, leaving the System variable still pointing to the pre-existing 32-bit Java path.
SAPCAR 7.20 -> Windows on x64 64bit: SAPCAR_315-20010453.EXE
IMDB_CLIENT100_80_0-10009664.SAR   Revision 80 for SAP HANA CLIENT 1.00
Support Package SAP HANA CLIENT 1.00 Windows on x64 64bit
IMC_STUDIO100_80_0-20007647.SAR   Revision 80 for SAP HANA STUDIO 1.00
Support Package SAP HANA STUDIO 1.00 Windows on x64 64bit
jre-7u67-windows-x64.exe - http://www.oracle.com/technetwork/java/javase/downloads/jre7-downloads-1880261.html
Jim Cleek
HP Enterprise Services

Unable to create an instance of the Java Virtual Machine

I hope someone can help me to encounter this problem. Well, I have read the instruction over and over on how to setup SQL Developer.
The version i have installed Oracle Database 11g Express Edition and downloaded sqldeveloper-4.0.0.13.80-no-jre and the jdk version 1.7.0_45. Problem is when setup oracle sql developer, pop-up screen highlight on
Unable to create an instance of the Java Virtual Machine
Located at path : C:\Program Files/Java/jdk1.7.0_45\jre\bin\client\jvm.dlll.
I have select the path earlier stage and direct to the C:\Program Files/Java/jdk1.7.0_45 ONLY FOLDER. It turns out to this error.
At the cmd screen error message as below :
Error occurred during initialization of VM
Could Not reserve enough space for object heap
Anyone do give me advise on how to solve this issue. Thank's alot.

What I did was:
Use
Windows Explorer to browse to C:\Users\user\AppData\Roaming\sqldeveloper\1.0.0.0.0Open
product.conf with wordpad
Go
to the bottom of the file
Uncomment
the 32 bit entry and change it to:Add32VMOption -Xmx512m

SDDM 4 EA3: Unable to launch the Java Virtual Machine (Win 7 64bit)

SQL Developer v4 EA3 is working fine, but I decided to download the stand-alone SQL Developer Data Modeler because I had seen people recommending using it in favor of the one bundled with SQLDEV.
Windows 7 64-bit
Java (64 bit) installed into C:\Program Files\Java\jdk1.7.0_25
When I double-click the short-cut to start SDDM I get the following pop-up dialog error:
Title: Oracle SQL Developer Data Modeler
Unable to launch the Java Virtual Machine
Located at path:
C:\Program Files\Java\jdk1.7.0_25\bin\msvcr100.dll
***NewsFlash***
I think I stumbled on the solution just prior to posting, so here is what worked for me in case anyone else runs into this....
I had created a desktop short-cut to "C:\Program Files\datamodeler\datamodeler.exe", which I am guessing is the 32bit version of the binary file.
I was able to launch successfully by pointing to "C:\Program Files\datamodeler\datamodeler64.exe"

That path is incorrect - strip everything after the jdk1.7.0_45\

Start up Error: "Could not create the Java virtual machine"

I downloaded WebLogic Platform 10.3.0.0 (net_server103_win32.exe) and installed it on my Windows Vista laptop.
I am unable to start the server.
From Start menu I selected (WebLogic ServerExamples-->Start Examples Server)
The following output displayed in the console window:
JAVA Memory arguments: -Xms256m -Xmx512m
WLS Start Mode=Development
CLASSPATH=C:\bea\wlserver_10.3\samples\server\examples\build\serverclasses;C:\be
a\patch_wlw1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\be
a\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\be
a\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\bea
\JROCKI~1\lib\tools.jar;C:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\bea\WLSE
RV~1.3\server\lib\weblogic.jar;C:\bea\modules\features\weblogic.server.modules_1
0.3.0.0.jar;C:\bea\WLSERV~1.3\server\lib\webservices.jar;C:\bea\modules\ORGAPA~1
.5/lib/ant-all.jar;C:\bea\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\bea\WLSER
V~1.3\common\eval\pointbase\lib\pbembedded57.jar;C:\bea\WLSERV~1.3\common\eval\p
ointbase\lib\pbclient57.jar;C:\bea\WLSERV~1.3\server\lib\xqrl.jar;;
PATH=C:\bea\patch_wlw1030\profiles\default\native;C:\bea\patch_wls1030\profiles\
default\native;C:\bea\patch_cie660\profiles\default\native;C:\bea\WLSERV~1.3\ser
ver\native\win\32;C:\bea\WLSERV~1.3\server\bin;C:\bea\modules\ORGAPA~1.5\bin;C:\
bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\Windows\system32;C:\Windows;C:\Windo
ws\System32\Wbem;C:\Program Files\ATI Technologies\ATI.ACE;C:\Program Files\Comm
on Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\DLLS
hared\;C:\Program Files\Common Files\Roxio Shared\9.0\DLLShared\;C:\Program File
s\QuickTime\QTSystem\;C:\Program Files\Java\jre1.6.0\bin;C:\groovy\Groovy-1.5.7\
bin;C:\Sun\SDK\bin;C:\Sun\SDK\jdk\bin;C:\bea\WLSERV~1.3\server\native\win\32\oci
920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
BEA JRockit(R) (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32, c
ompiled mode)
Starting WLS with line:
C:\bea\JROCKI~1\bin\java -jrockit -Xms256m -Xmx512m -Xverify:none -da -Dplat
form.home=C:\bea\WLSERV~1.3 -Dwls.home=C:\bea\WLSERV~1.3\server -Dweblogic.home=
C:\bea\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeD
ev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\bea\patc
h_wlw1030\profiles\default\sysext_manifest_classpath;C:\bea\patch_wls1030\profil
es\default\sysext_manifest_classpath;C:\bea\patch_cie660\profiles\default\sysext
manifestclasspath -Dweblogic.Name=examplesServer -Djava.security.policy=C:\bea
\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server
Could not create the Java virtual machine.
Stopping PointBase server...
PointBase server stopped.
C:\bea\wlserver_10.3\samples\domains\wl_server>
Does anyone have any suggestions on how to troubleshoot this problem?
Thank you,
B. Regan

I do not know how to modify any startup parameters. I am new to WebLogic and downloaded and installed the server for the first time yesterday. I used all of the defaults for the install. To start the server I am using Windows Start menu like this:
Start-->All Programs-->Oracle WebLogic-->WebLogic Server 10gR3-->Examples-->Start Examples Server
A command prompt window opens and the messages I described earlier display in the window.
These were the messages when I used another command window to call the example server domain's bin\setDomainEnv.cmd script and then execute java -version (as suggested in the earlier post):
C:\bea\wlserver_10.3\samples\domains\wl_server>java -version
java version "1.6.0_05"
Java(TM) SE Runtime Environment (build 1.6.0_05-b13)
BEA JRockit(R) (build R27.6.0-50_o-100423-1.6.0_05-20080626-2105-windows-ia32, c
ompiled mode)
I see now that when I go to
Start-->All Programs-->Oracle WebLogic-->WebLogic Server 10gR3-->Examples
that there is an option to "Stop Example Server" When I choose that option another command window opens, a couple of messages scroll by, there's a pause at a "connecting to t3://localhost:7001" then a bunch of message flash by and the command window disappears. So I can't capture the output of that command.
I tried rebooting my laptop but no change in the behavior.
There is some good news. I tried starting the Medical Records Server. That command succeeded. I will see what I can learn through using the Medical Records Server and ignore the Examples Server for now.
Thank you for the suggestions.
B.Regan

Could not create the Java virtual machine

Hello...
This is my jdev version 11.1.1.5.0
When I am running my project i am getting this type of error so what can i do for that
Here is that error:
*** Using port 7101 ***
"C:\Documents and Settings\Administrator\Application Data\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain\bin\startWebLogic.cmd"
[waiting for the server to complete its initialization...]
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jdbc_11.1.1\ojdbc6dms.jar;C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;C:\Program Files\Java\jdk1.6.0_16;.;
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;D:\app\Administrator\product\11.2.0\dbhome_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Java\jdk1.6.0_16\bin;.;;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
* To start WebLogic Server, use a username and   *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console        *
starting weblogic with Java version:
java version "1.6.0_24"
Java(TM) SE Runtime Environment (build 1.6.0_24-b50)
Java HotSpot(TM) Client VM (build 19.1-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client   -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Djavax.net.ssl.trustStore=C:\Oracle\Middleware\wlserver_10.3\server\lib\DemoTrust.jks -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=C:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1 -Djrockit.optfile=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\servers\DefaultServer -Doracle.domain.config.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\carml -Digf.arisidstack.home=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\servers\DefaultServer\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=C:\DOCUME~1\ADMINI~1\APPLIC~1\JDEVEL~1\SYSTEM~1.13\DEFAUL~1\oracle\store\gmds   -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath weblogic.Server
Error occurred during initialization of VM
Could not reserve enough space for object heap
Could not create the Java virtual machine.
Process exited.

Yesterday when i run that project at that time it successful compile and got output.
Today morning when i login in my PC and again i run that project once from there i am getting that massage......

Unrecognized option: -server Could not create the Java virtual machine.

Hi
I'm running JBoss 4.0 with JDK 1.5.0_12 (or could use 1.2.1 or 1.4.2) but when I try run.bat I get the following error
Unrecognized option: -server Could not create the Java virtual machine.
IfI try removing -server I get a different message
Exception in thread "main" java.lang.UnsupportedClassVersionError: org/jboss/Main (Unsupported major.minor version 48.0)
Hope you can help. Really need to get this going ASAP
Thanks
Geri

Hi all,
Thanks for responding.
This is what I get when I did the following:
$java -version
java version "1.2.2"
Solaris VM (build Solaris_JDK_1.2.2_06, native threads, sunwjit)
$which java
/usr/bin/java
The java version was definitely not what I expected as I had installed the Java(TM) 2 Runtime Environment 1.3.1 and no Java hotspot was found even though I had already installed it. Maybe it because I did not install them correctly.
How do I get rid of the older version and replace it with a newer one?
I noticed that in later versions of J2SE, Hotspot VM was said to have been incorporated in it. But there are no guides on how to get Hotspot up and running, it will be great if anyone of you can guide me on this or point me to a site that can help me.
Please bear with me as I am still very new to this. Thanks!

Osdm error 'could not create the Java virtual machine.'

Running on Windows XP. SQL Developer reports Java(TM) Platform=1.5.0_06
I downloaded and unzipped the osdm early adopter release,but when I double click on the osdm.exe, I get a dialog box titled"Java Virtual Machine Launcher" with the error:
could not create the Java virtual machine.
I'm don't know where to begin to troubleshoot this problem.
Is there a log,trace,error file somewhere?
Do I need something specific in my path or an environment variable set?

Thanks Jim, for helping and the support. I'll respond to a few things in this thread for the rest of the forum.
Feedback
Let's start with the feedback and support. As Rene said, he is working at answering all queries coming into the feedback application. This means reviewing the issues, working with the developers and logging bugs. Each comment and query in that application is addressed and users can go back in an review the feedback for their own comments in the application too. We have had considerable interest and downloads, about which we are very excited, and this means there are lots of queries. Rene is addressing all these, and as I type, there are no comments in that application that have not been addressed. Not all are closed, as there are some outstanding issues, but each user who has submitted a comment shold have received at least one email.
The Team
I'm reluctant to comment about which part of the product is built in which country, but will say that SQL Developer has been a small team, with the greater percentage of developers living outside the US from the outset. I love working in the team including the wide diversity of locales and cultures and also think that because we live across multiple time zones, we can help users most times of the day or night. We are very privileged to have had the modeling team join us and I'm sure you'll get to know them in time too. If you are interested, the team stretches across a few states in the US, Ireland, Northern Ireland,England, Belgium, Bulgaria, India and China!
Now to the problem. - Java virtual machine
1. There is a choice of download, either with the JDK or without. If you download the build with the JDK, there should be no problem, as the product knows where to find the jdk. I'm not sure I see which of these 2 downloads was used. So that would be useful information to have.
2. If you use the build without the JDK, then Data Modeling looking for the detail in your path.(Unlike in SQL Developer where we prompt you) You can test to see what is in your path by starting a command line, or command prompt and typing java -version. This will tell you what version of java is being looked for and used by Data Modeling.
If you do not have a JDK, then you can download and install that as described on the download page.
Troubleshooting
We want to release SQL Developer Data Modeling as a standalone tool (i.e. what you are testing today) or underpinned by a repository. So our main goal is to ensure that we have a solid stable and usable product for production. The plan is to follow production with a much tighter integration to the underlying SQL Developer framework.
Regards
Sue

Unable o create an instance of the java virtual machine Located at path

I am installing oracle sql developer on Windows XP SP2
I have downloaded sqldeveloper-3.1.07.42 and extracted it.
when i double click sqldeveloper it shows dialog box
Unable o create an instance of the java virtual machine Located at path
..\..\jdk\jre\bin\client\jvm.dll
and OK button
i have tried a solution posted on a site
1- Open the ide.conf file located under <Oracle SQL Developer>jdev\bin\
2- Edit :
AddVMOption -Xmx1024M
AddVMOption -Xmx256M or 512 MB change into 512 instead of 1024
it does not work for me
What is the cause & how to resolve it please help
I would be thankful to you guys

Hi,
I've got the exact same problem when launching to JDeveloper.
And I've searched on internet for days.
I did try to modify the number of
MaxPermSize in jdev.conf
and
Xmx and Xms in ide.conf
I've tried several combinations, and sometimes it works.
The disappoint fact is that even with the same combination of the settings, sometimes it works and sometimes it doesn't.
Sometimes it just work. Sometimes it doesn't...and after rebooting it works again......Sometimes even rebooting doesn't help.......Sometimes when change MaxPermSize to a smaller number it works...and next time it may not work again....Sometimes you change the MaxPermSize to some other number, save, and then change it back,,,,and it works again...but next time you try to use it, it may not work..........
I don't know what leads to these problems.....anyone could help? Thanks in advance....

JDeveloper: Unable to create an instance of the Java Virtual Machine

Hi,
I've got this
Unable to create an instance of the Java Virtual Machine Located in path: C:\u01\app\Oracle\Middleware\JDev11g\jdk160_21\jre\bin\client\jvm.dll
problem like many people else who use JDeveloper.
The OS is Windows XP, I've got 4G memory but maybe just 3G of it works.
But this is not the problem, because I've searched this problem on internet for days.
I did try to modify the number of
MaxPermSize in jdev.conf
and
Xmx and Xms in ide.conf
I've tried several combinations, and sometimes it works.
The disappoint fact is that even with the same combination of the settings, sometimes it works and sometimes it doesn't.
Sometimes it just work....
Sometimes it just doesn't work....
Sometimes it doesn't...and after rebooting it works again......
Sometimes even rebooting doesn't help.......
Sometimes when change MaxPermSize to a smaller number it works...and next time it may not work again....
Sometimes you change the MaxPermSize to some other number, save, and then change it back,,,,and it works again.....
but next time you try to use it, it may not work..........again....
I don't know what leads to these problems.....anyone could help, please?
Thanks in advance....

having mentioned that you have tried all possible options. can u try to change the jdk??

Issue in adding Space to the existing Virtual Machine from added repository

Hi,
I'm facing issue in adding Space to the existing Virtual Machine (Guest OS) from added repository.
Environment details :
VM Server : /OVS => 130GB
/OVS/935970F2CC2D4B4391701397517F1001/ => 512 GB
Things I have done :
•     I created a VM (Guest OS) in the VM Server with 120 GB
•     After creating the VM (Guest OS) , When I tried adding a VIRTUAL DISK of size 150 GB , I got an error “Maximum available Disk space is only 10GB”.
My query :
•     Will I be able to add space to Existing VM from the added Repository ( /OVS/935970F2CC2D4B4391701397517F1001/ ) , whose system.img is stored in path /OVS/running_pool/34_rhel/ .
Kindly help me out in this.
Thanks in advance.
-- Sri

Hi all,
I checked with Oracle on the above and got the info currently , the we can utilise only the space available in the existing repo and cannot extend to additional repo.
Work around is : Clone it to the other repo , or Use Symbolic link .
Thanks,
Sri.

The crash happened outside the java virtual machine in native code

Hi,
I have a biometric device with which I am given some C++ dlls. I am trying to call methods inside these using java (jna). I am loading the dll "zkemsdk.dll+" as follows:
zkemkeeper INSTANCE1 = (zkemkeeper)Native.loadLibrary("zkemsdk", zkemkeeper.class);//zkemsdk is the dll, I am loading the dll here.
Then, I am calling the function:
zkemkeeper.INSTANCE1.Z_Connect_NETEX("ip address",4370);//Z_Connect_NETEX is a function inside zkemsdk.dll
This returns me true or false based on whether am connected to the biometric device or not.Thus I am able to invoke this method without issues. But for other methods inside the dll, run time exception is thrown in console:
Can someone help me resolve this issue. ??? Following is the content of the log file generated.
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0351fe3b, pid=1664, tid=3832
# JRE version: 6.0_20-b02
# Java VM: Java HotSpot(TM) Client VM (16.3-b01 mixed mode, sharing windows-x86 )
# Problematic frame:
# C [zkemsdk.dll+0xfe3b]
# If you would like to submit a bug report, please visit:
# http://www.java.net/external?url=http://java.sun.com/webapps/bugreport/crash.jsp
# The crash happened outside the Java Virtual Machine in native code.
# See problematic frame for where to report the bug.
--------------- T H R E A D ---------------
Current thread (0x003a9000): JavaThread "main" [_thread_in_native, id=3832, stack(0x008c0000,0x00910000)]
siginfo: ExceptionCode=0xc0000005, reading address 0x00000106
Registers:
EAX=0x0090f7c4, EBX=0x00000001, ECX=0x00000000, EDX=0x00000001
ESP=0x0090f7b4, EBP=0x0090f848, ESI=0x00000096, EDI=0x003a9000
EIP=0x0351fe3b, EFLAGS=0x00010216
Top of Stack: (sp=0x0090f7b4)
0x0090f7b4: 00000000 0090f930 000003fc 00000103
0x0090f7c4: 0090f800 6d9532d0 373e92a0 00912ec5
0x0090f7d4: 00000401 0090f7d8 369860d1 0090f800
0x0090f7e4: 37390050 00000000 37390f90 00000000
0x0090f7f4: 0090f800 0090f930 003a9000 0090f830
0x0090f804: 10008fd8 0090f840 0090f930 00000008
0x0090f814: 0090f88c 0090fa28 0090f8f4 0090f848
0x0090f824: eb53f637 0351ffdc 00000096 00000003
Instructions: (pc=0x0351fe3b)
0x0351fe2b: 0f 53 50 8d 44 24 18 50 e8 58 7c 00 00 83 c4 0c
0x0351fe3b: 8b 4e 70 51 8b 0e 83 c3 04 53 6a 64 8d 54 24 18
Stack: [0x008c0000,0x00910000], sp=0x0090f7b4, free space=13d0090f2e8k
Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code)
C [zkemsdk.dll+0xfe3b]
C [jna5972695927945545932.tmp+0x9182]
C [jna5972695927945545932.tmp+0x2161]
C [jna5972695927945545932.tmp+0x2849]
j com.sun.jna.Function.invokeInt(I[Ljava/lang/Object;)I+0
j com.sun.jna.Function.invoke([Ljava/lang/Object;Ljava/lang/Class;)Ljava/lang/Object;+90
j com.sun.jna.Function.invoke(Ljava/lang/Class;[Ljava/lang/Object;Ljava/util/Map;)Ljava/lang/Object;+194
j com.sun.jna.Library$Handler.invoke(Ljava/lang/Object;Ljava/lang/reflect/Method;[Ljava/lang/Object;)Ljava/lang/Object;+344
j $Proxy0.Z_Beep(J)Z+19
j com.rfarrays.bhabs.fingerPrint.main([Ljava/lang/String;)V+84
v ~StubRoutines::call_stub
V [jvm.dll+0xf049c]
V [jvm.dll+0x17fcf1]
V [jvm.dll+0xf051d]
V [jvm.dll+0xf9bc5]
V [jvm.dll+0x10181d]
C [javaw.exe+0x2155]
C [javaw.exe+0x8614]
C [kernel32.dll+0xb729]
Java frames: (J=compiled Java code, j=interpreted, Vv=VM code)
j com.sun.jna.Function.invokeInt(I[Ljava/lang/Object;)I+0
j com.sun.jna.Function.invoke([Ljava/lang/Object;Ljava/lang/Class;)Ljava/lang/Object;+90
j com.sun.jna.Function.invoke(Ljava/lang/Class;[Ljava/lang/Object;Ljava/util/Map;)Ljava/lang/Object;+194
j com.sun.jna.Library$Handler.invoke(Ljava/lang/Object;Ljava/lang/reflect/Method;[Ljava/lang/Object;)Ljava/lang/Object;+344
j $Proxy0.Z_Beep(J)Z+19
j com.rfarrays.bhabs.fingerPrint.main([Ljava/lang/String;)V+84
v ~StubRoutines::call_stub
--------------- P R O C E S S ---------------
Java Threads: ( => current thread )
0x02b10c00 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=1976, stack(0x02dc0000,0x02e10000)]
0x02b0a400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=1280, stack(0x02d70000,0x02dc0000)]
0x02b08c00 JavaThread "Attach Listener" daemon [_thread_blocked, id=1984, stack(0x02d20000,0x02d70000)]
0x02b07800 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=2160, stack(0x02cd0000,0x02d20000)]
0x02b02400 JavaThread "Finalizer" daemon [_thread_blocked, id=2052, stack(0x02c80000,0x02cd0000)]
0x02afd800 JavaThread "Reference Handler" daemon [_thread_blocked, id=752, stack(0x02c30000,0x02c80000)]
=>0x003a9000 JavaThread "main" [_thread_in_native, id=3832, stack(0x008c0000,0x00910000)]
Other Threads:
0x02afc400 VMThread [stack: 0x02be0000,0x02c30000] [id=1504]
0x02b1b800 WatcherThread [stack: 0x02e10000,0x02e60000] [id=1980]
VM state:not at safepoint (normal execution)
VM Mutex/Monitor currently owned by a thread: None
Heap
def new generation total 4928K, used 2455K [0x22970000, 0x22ec0000, 0x27ec0000)
eden space 4416K, 55% used [0x22970000, 0x22bd5db0, 0x22dc0000)
from space 512K, 0% used [0x22dc0000, 0x22dc0000, 0x22e40000)
to space 512K, 0% used [0x22e40000, 0x22e40000, 0x22ec0000)
tenured generation total 10944K, used 0K [0x27ec0000, 0x28970000, 0x32970000)
the space 10944K, 0% used [0x27ec0000, 0x27ec0000, 0x27ec0200, 0x28970000)
compacting perm gen total 12288K, used 343K [0x32970000, 0x33570000, 0x36970000)
the space 12288K, 2% used [0x32970000, 0x329c5f20, 0x329c6000, 0x33570000)
ro space 10240K, 51% used [0x36970000, 0x36e9ae00, 0x36e9ae00, 0x37370000)
rw space 12288K, 54% used [0x37370000, 0x37a072d8, 0x37a07400, 0x37f70000)
Dynamic libraries:
0x00400000 - 0x00424000 C:\Program Files\Java\jre6\bin\javaw.exe
0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll
0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll
0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll
0x77e70000 - 0x77f03000 C:\WINDOWS\system32\RPCRT4.dll
0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll
0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll
0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll
0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL
0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll
0x6d800000 - 0x6da97000 C:\Program Files\Java\jre6\bin\client\jvm.dll
0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll
0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll
0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll
0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll
0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL
0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll
0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll
0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll
0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll
0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll
0x6d610000 - 0x6d623000 C:\Program Files\Java\jre6\bin\net.dll
0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll
0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll
0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll
0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll
0x76d60000 - 0x76d79000 C:\WINDOWS\system32\iphlpapi.dll
0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll
0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll
0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll
0x10000000 - 0x10052000 C:\Documents and Settings\bkonwar\Local Settings\Temp\jna5972695927945545932.tmp
0x03510000 - 0x03546000 C:\WINDOWS\system32\zkemsdk.dll
0x03560000 - 0x03574000 C:\WINDOWS\system32\commpro.dll
0x662b0000 - 0x66308000 C:\WINDOWS\system32\hnetcfg.dll
0x71a90000 - 0x71a98000 C:\WINDOWS\System32\wshtcpip.dll
VM Arguments:
jvm_args: -Dfile.encoding=Cp1252
java_command: com.xyz.bhabs.fingerPrint
Launcher Type: SUN_STANDARD
Environment Variables:
PATH=C:/Program Files/Java/jre6/bin/client;C:/Program Files/Java/jre6/bin;C:/Program Files/Java/jre6/lib/i386;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;;C:\Program Files\Java\jre1.6.0_07\bin;C:\Program Files\Android\android-sdk-windows\tools;C:\Program Files\TortoiseSVN\bin
USERNAME=BKonwar
OS=Windows_NT
PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 13, GenuineIntel
--------------- S Y S T E M ---------------
OS: Windows XP Build 2600 Service Pack 3
CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 13, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3
Memory: 4k page, physical 2085780k(1286036k free), swap 4024188k(3249652k free)
vm_info: Java HotSpot(TM) Client VM (16.3-b01) for windows-x86 JRE (1.6.0_20-b02), built on Apr 12 2010 13:52:23 by "java_re" with MS VC++ 7.1 (VS2003)
time: Wed May 25 10:02:24 2011
elapsed time: 21 seconds
Regards,
Bhabs
Edited by: 861222 on May 25, 2011 12:19 AM

861222 wrote:
# A fatal error has been detected by the Java Runtime Environment:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0351fe3b, pid=1664, tid=3832Not much to tell here. This line here looks suspiciously like a null-pointer error happening in the native code. It is impossible to say how, where and why. Go back to your code and start debugging I'd say, see where invalid data can be passed to the native code.

What's the average Virtual Machine density with RemoteFX?

Similar Messages

Maybe you are looking for