What's the benefit of creating Forward Lookup Zones?

Once I install the DNS Server (using Windows Server 2008 R2).
Do I need to create a new Forward Zone? Why?
Believe you can do it, and you will!!

Hi Ralph,
Yes you do, otherwise you will not be able to query hostname to ip address, for instance say you have dev machine, the hostname is devmachine, if you try to rdp, ping...etc you will not be able to do so, it will throw an error, hostname not found
Regards

Similar Messages

Delegate DNS Forward Lookup Zone

A: DNS - I would like to delegate the ability of creating Forward Lookup Zones at the root of my DNS (not subdomain).
For example, i would like to delegate to my "Tier 1" staff with the ability to modify our DNS. i want our "Tier 1" staff to have the ability to create a Primary Zone in order to redirect users that attempt to access a site with known malware content to an internal site with a warning message notifying the user that they have attempted to access a site that is not allowed.
Is this possible?

Hiya,
I'm about 86% sure that if they need permissions to create primary zones, they will have access to the complete DNS administration. So it's just a question if that is ok?
If that is okay you can add the users to the DNSadmin group and they should have access to perform the above from the DNS administration tool, which can be installed anywhere.

Permissions to create Reverse Lookup Zones in DNS

What Active Directory permissions are needed to create Reverse Lookup Zones in DNS? My co-worker is getting an access denied error when completing the wizard for this and the zone is NOT created. He is a member of the "DnsAdmins" group and
he can create Forward Lookup Zones. We are running Server 2008 R2 SP1 on our Domain Controllers where DNS is running. Any ideas?

Set permissions for the DnsAdmins group on the DomainDNSZones application partition. To do this, follow these steps:
Click Start, click Run, type Adsiedit.msc, and then click
OK.
In the task pane, right-click ADSI Edit, and then click
Connect to.
Under Connection Point, click Select or type a Distinguished Name or Naming Context, type the following, and then click
OK:
CN=MicrosoftDNS,DC= DomainDNSZones,DC=<var>Domain</var>,DC=<var>Domain_Extension</var>
In the task pane, locate and right-click CN=MicrosoftDNS,DC= DomainDNSZones,DC=<var>Domain</var>,DC=<var>Domain_Extension</var>, and then click
Properties.
Click the Security tab, and then click Advanced. The
Advanced Security Settings for MicrosoftDNS dialog box appears.
In the Permissions tab, click Add.
In the Enter the object name to select box, type DnsAdmins, and then click
Check Names to verify the name.
Click OK. The Permission Entry for Microsoft DNS dialog box appears.
In the Apply onto drop-down list, click This object only.
Click to select the Allow check box for the Full Control
permission, and then click OK.
In the Advanced Security Settings for MicrosoftDNS dialog box, click
Apply, and then click OK.
Click OK to close the properties dialog box for the DomainDNSZones application partition.
Close the ADSI Edit window.
Test whether you can create a new DNS zone now.
If you found this post helpful, please "Vote as Helpful". If it answered your question, remember to "Mark as Answer". MCSE,MSCITP-EA

Create a "New Zone" in the "Forward Lookup Zone"

I am working I Windows Server 2008 R2 SP1.
I went to DNS Server and tried to create a "New Zone" in the "Forward Lookup Zone" under "subdomain.domain.com".
I got the error: "Zone Not Loaded by DNS Server".
Tried to F5 to Refresh but still same error.
How do I get a new child or "subdomain" that will work in forest or "domain.com"?

Hi
You need to create a new child Domain in a new server.
Build a new server and follow the belwo link as how to create a new child domain. This will create a subdomain as well a DNS
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx

Setting Forward Lookup Zones in DNS based on the port queried

I have the following problem.
We are using Dynamic DNS to access our site and the modem/router differentiates via port forwarding what server the query goes to based on the port number ie all request go to abc.dyndns.org:port number.
Based on the port eg. port 3389 goes to server1 (192.168.0.1), port 8080 goes to server 2(192.168.0.2), port 80 goes to server 3 (192.168.0.3). This all works well if you are entering from OUTSIDE the local network.
INSIDE the local network, I have setup a Forward Lookup Zone on a Domain server using DNS where the Host A resolves abc.dyndns.org to the local IP address of server 1 (192.168.0.1). This works fine.
How do I get the abc.dyndns.org:other ports to go to the other servers IP addresses as you can only setup one Host A record of abc.dyndns.org to one address 192.168.0.1, if someone queries from INSIDE the local network as the modem/router does not
come into play?

As I said before, DNS doesn't do this. DNS has nothing to do with ports resolution. It's purely a name to IP or IP to name resolution. THAT'S IT!
But you can port translate each individual port from the WAN IP to different IPs internally. I thought I said that earlier? Maybe I wasn't clear. I apologize for not fully explaining it, for I thought you understood that part.
Revisiting the bottom of your original post:
INSIDE the local network, I have setup a Forward Lookup Zone on a Domain server using DNS where the Host A resolves abc.dyndns.org to the local IP address of server 1 (192.168.0.1). This works fine.
How do I get the abc.dyndns.org:other ports to go to the other servers IP addresses as you can only setup one Host A record of abc.dyndns.org to one address 192.168.0.1, if someone queries from INSIDE the local network as the modem/router does not
come into play?
You still have to specify the port internally. Assuming mail.domain.com is server4 (since you didn't specify that port in your original post), you simply create a mail.domain.com zone and give it a blank IP for (making this up) 192.168.0.3, then type in
the same exact thing you would do from the outside:
http://mail.domain.com:8083/folder
Like I said, it's in the application. DNS just resolve to an IP. There are 65,536 port numbers, and DNS does not deal with resolving any of them. That's the responsibility of the application or service and the client (such as a browser) connecting to
it.
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

What is the need of creating partner functions for sales document type.

Hi SAP (SD-GURUS),
Actually we create partner functions before creating customer ex: sold to party, ship to party, bill to party, and payer.
These partner functions are going to be copied into sales order while processing sales order.
Again what is the need of creating partner functions for sales document type.
Thanks&Regards
sreenivas peruru

There are some Partners you could enter at Sales ORder Level. E.g. Sales Person, Employee Responsible, Forwarding Agent, Broker, etc.
Thus these partner Determination need to be carried out at Sales Order Level & not at Customer Master level.
So we have to configure partner Determination for various levels e.g. Customer Master, Sales Order, Delivery level etc...
Hope this helps...
THanks,
Jignesh Mehta

What is the benefit of using clipping paths for a knock out?

I found a posting saying they need someone to knock out the background of a lot of images using clipping paths. My question is, WHY use a clipping path? I know the rule of not using a selection tool such as the Magic Wand and then turning it into a clipping path and I know why that is. But if all is needed is for the background to be knocked out, why can't we just use the selection tool in the first place and just knock out the background from there? What is the benefit of that clipping mask?

Usually the term Clipping Path refers to turning a path into a clipping path (in the paths panel) for use in older programs such as PageMaker that don't support transparency.
For example if one wanted to import a file into PageMaker and only have a certain part of the document visible, one would make a path (or selection) around the object
and turn the path (or selection) into a clipping path. Sorta the same results you see in photoshop using a layer mask or vector mask.
Also clipping paths are used in certain printing workflows.
Without seeing the posting it's hard to say what they meant and in photoshop 6 vector masks were labeled as Layer Clipping Paths not to be confused with real clipping paths.
Old versions of photoshop also used the term Group With Previous to denote Create Clipping Mask.
photoshop 6:
Photoshop cs6:
Anyway clipping masks and clipping paths are two different things in photoshop.
layer masks, vector masks and clipping masks:
http://helpx.adobe.com/content/help/en/photoshop/using/masking-layers.html
an example of creating a clipping path:
http://www.clippingpathspecialist.com/tutorials.html

What is the need of creating New order type in PO

Dear Experts,
I have a doubt in MM, what is the need of creating New Order Types? Please explain with Business scenario. Thanking you,
Regards,
Elangovan.A

Hi Elangovan
Whenever you have a doubt like this...
--- just verify the config settings for your parameter (order type here).
---Also check whether authorizations can be given for this ?
---Do you need it for specific analysis ? Are there standard reports/listings available ?
So, some of the uses of order type are:
1) What are the parameters controlled by order type ?
It controls the number ranges and screen layouts etc. So, if you want to have different set of number ranges and different screen settings, then you may need a new order type.
2) Authorizations can be controlled with order type.
3) You can also use it in analysis/listings
Best regards
Ramki

What is the benefit of Using Data Adaptor

Hello
I wonder that What is the benefit of Using Data Adaptor ? I don't know TopLink Technology , inorder to using Data Adaptor I should know toplink but what is the advatages of using BPEL database adaptors in conditions thet I can make webservices by making plsql web services or exposing ADF application modules more easier?
I think that if I use Data Adaptor (based of Toplink) I can use JTA feature for transaction managment , am I thinking Correct?
for example I can invoke to webservice A and the B in BPEL process with two DB adaptores (by global transaction ) such that if A failes the process automatically roles back the B transaction without need that I manauly compensate the undo process
please help me ?

Thank you for your very useful comments about DB adapter
I tried again and I have Successfully deploy and test my DB adapter with using # for parameter.
But I have another question : We have ADF Application that using ADF bc for user data entry supporting in use case scenario , but we want to call web services (eg BPEL) in save operation instead of ADF application modules Normal commit !
If we want using Data adapter for persist the Data that user entered by UI , we must write a lot of Insert or Update statements in DB adapter because of lot of database entities.
How can we shorten this production scenario in our Project?

What is the use for CREATING VIEW WITH CHECK OPTION?

Dear Legends,
I have a doubt
What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.
A: Enforcing constraints at DB level.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???
Please clear my doubt's Legends
Lots of Thanks....
Regards,
Karthik

Hi, Karthick,
karthiksingh_dba wrote:
... What is the use for creating view?
A: First Data Integrity, Selecting Particular Columns..Most views are created and used for convenience. A view is a saved query. If the same operations are often done, then it can be very convenient to code those operations once, in a view, and refer to the view rather than explicitly doing those operations.
Sometimes, views are created and used for security reasons. For example, you many want to allow some users to see only certain rows or certain columns of a table.
Views are necessary for INSTEAD OF triggers.
What is the use for creating a view with check option?
A: As per oracle manual I read that its a referential integrity check through views.The reason is integrity, not necessarily referential integrity. The CHECK option applies only when DML is done through the view. It prohibits certain changes. For example, if a user can't see certain rows through a view, the CHECK option keeps the user from creating such rows.
A: Enforcing constraints at DB level.I'm not sure what you mean. Please give an example.
A: using CHECK OPTION we can do INSERTS UPDATES for a view for those columns who have no constraints... is it right??No. Using CHECK OPTION, you can do some inserts and updates, but not others. The columns involved may or may not have constraints in either case.
A: If we do a INSERT OR UPDATE for columns who have constraints it will show error... is it right???If you try to violate a constraint, you'll get an error. That happens in views with or without the CHECK OPTION, and also in tables.

What are the tools to create a digital magazine for ipad version and how can be place it in newsstand?

Hello..
"what are the tools to create a digital magazine for ipad version and how can be place it in newsstand?"
I am very tired after done a week of R&D on this issue..
But i doesn't get any fair solution for this one..
I hope this is best option to place my issue here to get quick solution..
Thanks and Regards..

We are all users here.
There is no one here from Apple.
In order for you to develop and distribute content for the iPad, you need to become an apps developer.
Not sure where you sign up for this or who you have to call.
There should be a place on Apple's site that refers to a section of the site if you want to be an Apple iOS content developer.
It cost, I believe $99 U.S. to become an Apple apps developer. You'll agree to Apple's Non-disclosure rules. You'll receive Apple's app/software developers kit,and access to Apple's app developer site.
No one here is going to be able to help you.
Good Luck.

What is the benefit of configuring the XSS Homepage Framework for ESS

What is the benefit of configuring the XSS Homepage Framework for ESS?
Over using standard iViews.

It means you can disable (or enable) the exact functionality your customer needs rather than sticking with the default implementation.
Most customes do not use everything available from ESS or MSS. Switching it off (making it unavailable) is WAY better than leaving potentially unconfigured content to be accessed by users. SAP generally do not handle the error cases and you will get lots of nasty stack traces .....
Haydn

HT5295 What are the basics of creating and distributing Podcasts?

What are the basics of creating and distributing Podcasts?

Search the web for "creating podcasts" and you'll find a plethora of information.
Regards.

What are the differences of creating a physical standby database with ASM?

I want to create a physical standby database for my 10g(10.2.0.1) database. But it is using ASM. Is it possible to create a standby database for a database using ASM?
What are the differences of creating a physical standby database with ASM?

tell us what your research shows and we'll try to
validate it. I am simulating Oracle ASM on a PC and I want to try
DataGuard on it now. So I am trying to create DataGuard
on an ASM system. The purpose is only learning and test.That's telling us how you are researching, not what you have observed.
Your research could have included looking at the documetation, and you might have found http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/scenarios.htm#sthref1642
which discusses exactly what you are looking for.
Message was edited by:
Hans Forbrich

What is the use of creating proxy services using WSDL.

Hi
Am a beginner in ALSB and i have a basic question. Business services are created using WSDL,thats sounds logical as we need to invoke the actual backend services .
Proxy services are connected to business services and what is the need that it can be e created using WSDL.
What is the use of creating proxy services using WSDL.

Hi,
I beleive you are confused because of the apparent inclusion of transport information in WSDL (that is the host:port/endpoint where the service is hosted). However, if you refer to the w3c specification of WSDL1.0 ([url http://www.w3.org/TR/wsdl]www.w3.org/TR/wsdl), you will find that WSDL has three separate sections:
1. The schema information that describes data element(s): specified in types
2. The message information ie message and port sections that specify the parameters and the operations
3. The service section that specify the actual protocol and endpoint binding.
Ideally, a WSDL can be broken down into these three separate components. Any WSDL containing the first two is called an abstract WSDL and is used for a top-down approcah for web services, and if the third part is used, then you get a concrete WSDL, containing invocation end-point also.
Comming back to your question one can typically use an Abstract WSDL for creating proxy service. This way, the service requester and integration can go on two separate threads where the common denominator or agreement between these two parties in terms of operation name and data element are imposed using the WSDL.
Thanks and Regards
Vivek Nandey
BEA Certified Developer for Integration Solutions

What's the benefit of creating Forward Lookup Zones?

Similar Messages

Maybe you are looking for