What's the best EOS for video?

Hello,
I'm in the market for a new DSLR.  Obviously I want beautiful photos, but the video is almost more important.  I would love to get the 7D, but I'm interested in whether there is a more budget friendly option that is just as good.  What about the 60D?
Or perhaps a Rebel T3i or T4i?
Thanks for your suggestions!!

If video on a budget is your primary desire, the T3i or 60d with Magic Lantern would be my choice. ML will give both cameras essentially the same functions (which are IMMENSE with ML on board), but the 60d is going to have a few extras you may prefer in a stills body (plus little things like ease of swapping batteries on some tripods because of battery door placement). That said, if you can get a refurb T3i for $360 vs a 60d for $600 (black friday prices), I would get the T3i hands down. That is a LOT of camera for the money at those prices. Too bad it shows T2i out of stock, but at >$300 it's obvious why!!!
Lenses make a difference in stills quality, but for video not as big, especially for what you want to do. There is NO reason you need to spend $1000 on a lens for video. An HD video image is about 2mp. A still will be 18mp. So obviously the quality of glass will have more affect on IQ for stills than video. Basically, any lens that is good enough for stills will be good enough for video. Not necessarily the other way though. That's why people like to use old MF lenses for bargain finds for video. There are other things to consider such as focus ring placement and smoothness for video use. For example, the 50 1.8 is perfectly fine for stills but the focus ring is in a bad spot for racking focus for video use.
I don't see a substantial enough reason to get a T4i over a 60d/T3i when it costs more than either. There is AF in video mode but after seeing it in real life action it isn't as impressive as it is on paper, and not worth the extra cost considering what the other two can be had for IMHO. I don't see the 7d as being a good choice for what you want.
I suggest the 60d and T3i because if you're doing video, that swivel screen will pay for itself immediately. I reach for my 60d over my T2i for video every time because of the swivel screen. Heck, I grab my SX20 for video (if I'll be outside or in good light) over the T2i BECAUSE of the swivel screen alone.

Similar Messages

  • What are the best settings for video  compression if my end result is for use as  progressive .flv

    What are the best settings for video compression if my end result is for use as  progressive .flv.?
    Thanks,
    KIM

    Use the Final Cut Studio forum
    http://discussions.apple.com/forum.jspa?forumID=939

  • What is the best Monitor for Video editing & Graphic Design?

    Hi every one,
    I would like to find out what is the best monitor for video editing and graphic design that you recomend, I am trying to buy one but not sure which one is good and not expansive.
    Thanks very much

    I don't want 2 monitors, so a single 27inch model just what I need... plenty of room for PPro, or I can have a Word document and a Text file open and side by side
    John,
    That is personal taste and there is no discussing taste. However, from my perspective, and that is personal, I prefer 3840 x 1080 resolution with dual monitors over 1920 x 1080 with a single monitor, but that is because I very often have Firefox, Filezilla, Dreamweaver and some other applications open at the same time, switching between the Adobe forums, Gmail accounts, Notebook results from the PPBM5 data submissions, PPBM5 form submissions, MySQL access, phpadmin pages to update the database, the PPBM5 results pages and various DW .php pages for the maintenance of our database and switching back and forth between various versions of PR. I occasionally really run out of real estate with all these applications and could not consider a single monitor with only 1920 x 1080 resolution, even if it were a 105" screen. In the future I would even like to have a four monitor setup (with MPE hardware support) in a two by two configuration, so that I can freely move my application screens around.
    If that happens, notice I say if and not when, my preference for a monitor would be something like 4 Samsung F2380 monitors. Small bezel, great display and panel, affordable.

  • What's the best method for video loop + precached video transitions?

    Hello, I am hoping that a kindly Flash guru can send me
    running off in the right direction.
    What I want to do is make a SWF which works in the same
    manner as a DVD menu, using Flash video.
    Simply put, that means having a video loop for the background
    of each 'page', with links to other pages. Each of these links
    would travel through a video transition to reach the next page.
    I am an experienced Java programmer; After Effects user and
    DVD Author but I have to admit that as a beginner to Flash, I find
    the number of ways you can embed video... symbols... media server
    etc. quite confusing.
    All I want to do is have my loops and transitions as FLV
    files on my normal HTTP server, play the current loop while
    precaching the possible transitions etc.
    I am very happy to research the precise coding aspect of this
    but I am hoping someone can tell me which of the (apparently
    numerous) methodologies available is the best one to go down.
    Do I need to have all my objects in the timeline, or can I
    have a single object and reassign the video with code?
    If it helps my video loops and transitions are 400x300 and
    around 4-10 seconds, so the bandwidth requirements aren't
    unreasonable.
    Any advice greatly appreciated.

    so just make your video as movie clip. >import
    video>deployment>embed video SWF and play in time
    line>symbol type - movie clip > ..... than your video become
    movie clip and you can easily modify like any other MC in time
    line.
    i hope that i'm answering your question so far.

  • What is the best converter for video files in mpeg, avi, wmv, mps, etc for imovie and what type of video files does the iMovie use? I recently purchased a MacBook Pro -version 10.10.1. I make movies, but the iMovie does not support my video files.

    What is the converter for video files, to use in the iMovie? My files are mpeg, wmv, mts, avi, etc.  I recently purchased a MacBook Pro - version 10.10.1.

    AppGeeker will do the job.

  • What is the best software for video fish-eye/barrel reduction?

    I recently bought a GoPro camera and would like to reduce the fish-eye/barrel effect on some of the video clips. I haven't been able to find any plug-ins or software for mac's that can do this. I was hoping to do all my video editing with iMovie but it doesn't seem to have everything I need. What do you recomend?

    See this Wikipedia article for some encoders:
    * http://en.wikipedia.org/wiki/Theora#Encoding

  • What's the best connection for Video/Film Editing and VFX...

    External Hard Drive connected via FireWire 800 or Ethernet (Network) External Hard Drive connected directly to my iMac's Ethernet port?
    Any Pros? Cons? How would that work? I am in a situation where I can exchange a USB 3.0 external hard drive (I totally didn't know 2011 iMacs didn't have USB 3.0 ports) with an Ethernet equipped (network) external hard drive.

    I would go firewire even if the ethernet is rated 1Gbit/sec
    not even sure how they will on adhoc networks which connecting it directly to the ethernet port would mean

  • What's the best app for taking a video on ipad2?

    I am a tennis coach and am looking for an app for my iPad2 to do video analysis. I need to be able to video someone doing a serve and then show it to them in slow motion and be able to pause it. What's the best app for this?

    Do some research into HTML5 video. Unless the user is using a modern browser with video playback capabilities, they would need to have an app to provide video playback, as well as the codecs for the video file format that you will be serving them. At this point in time, MP4 is the "clear(est)" winner of the online video formats. However not all browsers provide built-in playback. For instance, Firefox currently does not support MP4. Future Firefox builds will rely on whatever video playback the native OS provides. So coming back to your question - no, there's no real way of guaranteeing video playback on the web. You do the best you can and provide links to users where they can download the appropriate codecs and players and call it a day.

  • What's the Best App For Watching Videos on iPad Air?

    Okay, so there's no Flash past, present or future for the iPad.  I read some discussions here in the archives from a year and two ago about which workaround works around best (or least badly).  Is there any update now as of December 2013 for what's the best app for viewing videos online on the iPad (Air)?  Thanks.

    I downloaded the new (2013) version of Photon and it's been playing, appropriately enough, episodes of Star Trek: TAS that otherwise require Flash.   The one thing I have to remember is to click the goofy lighting bolt icon toward the top right-hand corner of the Photon screen when I return to warch an episode if I stopped in the middle.  Basically it will turn off the "Flash" emulation when the screen goes dark with inactivity, and then when you reopen Photon it crashes and you have to re-reopen Photon, click on the link to return to the website, and then click the lightning bolt icon.  I don't know why the producers made it that way, as it's pretty inconvenient, but maybe they wanted to make a browser more than a Flash emulator.  I haven't tried other Flash videos yet, but so far, so good.  :-)

  • What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?

    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks

    function(){return A.apply(null,[this].concat($A(arguments)))}
    bmiller0525 wrote:
    What are the best settings for exporting video in Premiere Pro Cs5.5 in HD MP4 format?
    Any help would be greatly appreciated! Thanks
    thats way too vague of a question... best what?  quality? size? playback?
    best quality then use high bitrate, small size use low bitrate.

  • What is the best Computer for HD video editing where can I get it under $3000-5000? Thank you!

    What is the best Computer for HD video editing where can I get it under $3000- $5000.00?

    The wording of your question suggests you may be new to video editing, in which case the types of projects you will be doing may not be the most complex.
    Please accept my apology if that assumption is incorrect.
    The cheapest computer available will edit 1080p video perfectly well but if you must have the "best" you will be looking at nothing less than a MacPro.
    Too many people get hung up about the equipment they use  and blame it for any inadequacies  .  .  .  when the most important component is the operator.

  • What is the best antivirus for MacBook Pro?

    What is the best antivirus for MacBook Pro?

    1. This comment applies to malicious software ("malware") that's installed unwittingly by the victim of a network attack. It does not apply to software, such as keystroke loggers, that may be installed deliberately by an intruder who has hands-on access to the victim's computer. That threat is in a different category, and there's no easy way to defend against it. If you have reason to suspect that you're the target of such an attack, you need expert help.
    If you find this comment too long or too technical, read only sections 5, 6, and 10.
    OS X now implements three layers of built-in protection specifically against malware, not counting runtime protections such as execute disable, sandboxing, system library randomization, and address space layout randomization that may also guard against other kinds of exploits.
    2. All versions of OS X since 10.6.7 have been able to detect known Mac malware in downloaded files, and to block insecure web plugins. This feature is transparent to the user, but internally Apple calls it "XProtect." The malware recognition database is automatically checked for updates once a day; however, you shouldn't rely on it, because the attackers are always at least a day ahead of the defenders.
    The following caveats apply to XProtect:
    It can be bypassed by some third-party networking software, such as BitTorrent clients and Java applets.
    It only applies to software downloaded from the network. Software installed from a CD or other media is not checked.
    3. Starting with OS X 10.7.5, there has been a second layer of built-in malware protection, designated "Gatekeeper" by Apple. By default, applications and Installer packages downloaded from the network will only run if they're digitally signed by a developer with a certificate issued by Apple. Software certified in this way hasn't necessarily been tested by Apple, but you can be reasonably sure that it hasn't been modified by anyone other than the developer. His identity is known to Apple, so he could be held legally responsible if he distributed malware. That may not mean much if the developer lives in a country with a weak legal system (see below.)
    Gatekeeper doesn't depend on a database of known malware. It has, however, the same limitations as XProtect, and in addition the following:
    It can easily be disabled or overridden by the user.
    A malware attacker could get control of a code-signing certificate under false pretenses, or could simply ignore the consequences of distributing codesigned malware.
    An App Store developer could find a way to bypass Apple's oversight, or the oversight could fail due to human error.
    For the reasons given above, App Store products, and other applications recognized by Gatekeeper as signed, are safer than others, but they can't be considered absolutely safe. "Sandboxed" applications may prompt for access to private data, such as your contacts, or for access to the network. Think before granting that access. OS X security is based on user input. Never click through any request for authorization without thinking.
    4. Starting with OS X 10.8.3, a third layer of protection has been added: a "Malware Removal Tool" (MRT). MRT runs automatically in the background when you update the OS. It checks for, and removes, malware that may have evaded the other protections via a Java exploit (see below.) MRT also runs when you install or update the Apple-supplied Java runtime (but not the Oracle runtime.) Like XProtect, MRT is presumably effective against known attacks, but maybe not against unknown attacks. It notifies you if it finds malware, but otherwise there's no user interface to MRT.
    5. XProtect, Gatekeeper, and MRT reduce the risk of malware attack, but they're not absolute protection. The first and best line of defense is always your own intelligence. With the possible exception of Java exploits, all known malware circulating on the Internet that affects a fully-updated installation of OS X 10.6 or later takes the form of so-called "trojan horses," which can only have an effect if the victim is duped into running them. The threat therefore amounts to a battle of wits between you and the malware attacker. If you're smarter than he thinks you are, you'll win.
    That means, in practice, that you never use software that comes from an untrustworthy source, or that does something inherently untrustworthy. How do you know what is trustworthy?
    Any website that prompts you to install a “codec,” “plug-in,” "player," "extractor," or “certificate” that comes from that same site, or an unknown one, is untrustworthy.
    A web operator who tells you that you have a “virus,” or that anything else is wrong with your computer, or that you have won a prize in a contest you never entered, is trying to commit a crime with you as the victim. (Some reputable websites did legitimately warn visitors who were infected with the "DNSChanger" malware. That exception to this rule no longer applies.)
    Pirated copies or "cracks" of commercial software, no matter where they come from, are unsafe.
    Software of any kind downloaded from a BitTorrent or from a Usenet binary newsgroup is unsafe.
    Software that purports to help you do something that's illegal or that infringes copyright, such as saving streamed audio or video for reuse without permission, is unsafe. All YouTube "downloaders" are in this category, though not all are necessarily harmful.
    Software with a corporate brand, such as Adobe Flash Player, must be downloaded directly from the developer’s website. If it comes from any other source, it's unsafe.
    Even signed applications, no matter what the source, should not be trusted if they do something unexpected, such as asking for permission to access your contacts, your location, or the Internet for no obvious reason.
    6. Java on the Web (not to be confused with JavaScript, to which it's not related, despite the similarity of the names) is a weak point in the security of any system. Java is, among other things, a platform for running complex applications in a web page, on the client. That was always a bad idea, and Java's developers have proven themselves incapable of implementing it without also creating a portal for malware to enter. Past Java exploits are the closest thing there has ever been to a Windows-style virus affecting OS X. Merely loading a page with malicious Java content could be harmful.
    Fortunately, client-side Java on the Web is obsolete and mostly extinct. Only a few outmoded sites still use it. Try to hasten the process of extinction by avoiding those sites, if you have a choice. Forget about playing games or other non-essential uses of Java.
    Java is not included in OS X 10.7 and later. Discrete Java installers are distributed by Apple and by Oracle (the developer of Java.) Don't use either one unless you need it. Most people don't. If Java is installed, disable it — not JavaScript — in your browsers.
    Regardless of version, experience has shown that Java on the Web can't be trusted. If you must use a Java applet for a task on a specific site, enable Java only for that site in Safari. Never enable Java for a public website that carries third-party advertising. Use it only on well-known, login-protected, secure websites without ads. In Safari 6 or later, you'll see a lock icon in the address bar with the abbreviation "https" when visiting a secure site.
    Follow the above guidelines, and you’ll be as safe from malware as you can practically be. The rest of this comment concerns what you should not do to protect yourself from malware.
    7. Never install any commercial "anti-virus" or "Internet security" products for the Mac, as they all do more harm than good, if they do any good at all. Any database of known threats is always going to be out of date. Most of the danger is from unknown threats. If you need to be able to detect Windows malware in your files, use one of the free anti-virus products in the Mac App Store — nothing else.
    Why shouldn't you use commercial "anti-virus" products?
    Their design is predicated on the nonexistent threat that malware may be injected at any time, anywhere in the file system. Malware is downloaded from the network; it doesn't materialize from nowhere.
    In order to meet that nonexistent threat, the software modifies or duplicates low-level functions of the operating system, which is a waste of resources and a common cause of instability, bugs, and poor performance.
    By modifying the operating system, the software itself may create weaknesses that could be exploited by malware attackers.
    8. An anti-malware product from the App Store, such as "ClamXav," doesn't have these drawbacks. That doesn't mean it's entirely safe. It may report email messages that have "phishing" links in the body, or Windows malware in attachments, as infected files, and offer to delete or move them. Doing so will corrupt the Mail database. The messages should be deleted from within the Mail application.
    An anti-virus app is not needed, and should not be relied upon, for protection against OS X malware. It's useful only for detecting Windows malware. Windows malware can't harm you directly (unless, of course, you use Windows.) Just don't pass it on to anyone else.
    A Windows malware attachment in email is usually easy to recognize. The file name will often be targeted at people who aren't very bright; for example:
    ♥♥♥♥♥♥♥♥♥♥♥♥♥♥!!!!!!!H0TBABEZ4U!!!!!!!.AVI♥♥♥♥♥♥♥♥♥♥♥♥♥♥.exe
    Anti-virus software may be able to tell you which particular virus or trojan it is, but do you care? In practice, there's seldom a reason to use the software unless a network administrator requires you to do it.
    The ClamXav developer won't try to "upsell" you to a paid version of the product. Other developers may do that. Don't be upsold. For one thing, you should not pay to protect Windows users from the consequences of their choice of computing platform. For another, a paid upgrade from a free app will probably have the disadvantages mentioned in section 7.
    9. It seems to be a common belief that the built-in Application Firewall acts as a barrier to infection, or prevents malware from functioning. It does neither. It blocks inbound connections to certain network services you're running, such as file sharing. It's disabled by default and you should leave it that way if you're behind a router on a private home or office network. Activate it only when you're on an untrusted network, for instance a public Wi-Fi hotspot, where you don't want to provide services. Disable any services you don't use in the Sharing preference pane. All are disabled by default.
    10. As a Mac user you don't have to live in fear that your computer is going to be infected every time you install an application, read email, or visit a web page. But neither should you have the false idea that you will always be safe, no matter what you do. The greatest harm done by security software is precisely its selling point: it makes people feel safe. They may then feel safe enough to take risks from which the software doesn't protect them. Nothing can lessen the need for safe computing practices.

  • Hello.what is the best converter for iPhone(for converting variety of file formats to mp3)?

    hello.what is the best converter for iPhone(for converting variety of file formats to mp3)?

    the way the total video convert works is really easy you put the song in that you want to convert you tell it to convert into mp3 format and stay the same quality
    Message was edited by: Robert1986nb

  • What's the best Mac for running Final Cut Pro X?

    Title says it all. What's the best Mac for running Final Cut Pro X? I'm not looking to make a feature length hollywood film. But I'd like to be able to edit video without lag.

    Yes. Begin with the fastest processor / graphics card / and as much RAM as you can afford. (As all three will become obsolete over time.)
    I started from scratch. I have a 27-inch iMac with a 3.4 G Intel Core i7. (currently the fastest processor for an iMac) I also ordered the best graphics card--AMD Ratheon HD. I ordered 16G of RAM, but recently added more RAM to equal 24G. (OWC makes good after-market RAM for iMACs.)
    Last, I ordered a flash drive / SATA hard drive combo.  (250G on flash / ITB on SATA). The OS and all of my applications run off the flash drive. (for fast start up!)
    I put all of my media and FCP projects onto the SATA hard drive.
    Now, I had the option to order a 2TB SATA. But, I realized I can always buy more external storage as I edit more and more projects. ALSO! FCPX is GREAT when it comes to editing projects on external drives! I can segregate an entire project and its media files onto a removeable drive. I simply launch FCPX, plug in the drive and--poof!--I'm ready to edit. It sees the project and the media right away. When I'm done editing, I can then send this drive to another editor (also using FCPX) or attach it to my MacBook if I want to edit the same project in the field.
    This has worked for me. I wish you luck.

  • What's the best way for home sharing to iDevices without iTunes?

    What's the best way for home sharing movies and tv shows on my iDevices?  I know I can use home sharing through iTunes, but I'm looking for a way to share videos to my iDevices without having to leave my computer on.  I have a MacPro, iPhone, iPad, Airport Extreme, and Airport Express (and several external hard drives).  Can anyone suggest an app that would do this?  Can I have videos on an external hd attached to an Airport Extreme/Express and have it stream without iTunes?

    If your "server" is new enough to run Mountain Lion, you can purchase the OS X Server app from the Mac App store and you'll have everything you need to host a NetInstall (NetBoot) server.
    If your machine does not support Mountain Lion, you'll need to purchase the appropriate Mac OS X Server software (i.e. Lion Server or Snow Leopard Server)
    From there you can host NetInstall or NetRestore images, depending on your preferred workflow, which can be created using System Image Utility.
    As Richard points out you can also use Deploy Studio which, again depending on your preferred workflow, might simplify things.

Maybe you are looking for