What's the best option to get the best out of my h...

Prior to the speed upgrade I was connecting at 38MB/ 8MB and now checking my speed via BBMAX I'm connecting at 62MB/14MB (BT speedchecker advised 56.6MB/18MB) so are pleased with the upgrade.
My main pc tests as above connected to the home hub 3 via a Cat 5 cable. Testing the other PCs/ PS3 in the rest of the house the best I can connect is 33MB via a wireless n usb adaptor. I've tried TP link 200MB power line adaptors connected to the home hub and to the PC using the house power circuits and still only obtain 33MB on the speed test (the T link utility shows I'm connecting at 133MB).
I assume my wireless network is being limited due to other older G type devices (such as mobile phones etc) bringing the wireless N network down to their level?
So to get the best out of my broadband in the rest of the house, should I upgrade to TP link 500MB units, get a dual band router (which will run G and N type devices) or are these two upgrades not worth it and should I take a hit and hard wire and have all the problems of running the cat 5 cables to the rest of the house?
PS as a side note my son has the PS Vita and cant get any speed results faster than 13MB on the wireless network

hmmm - you have lots of options and it really pays to think them all through for what you want to achieve. Don't lose sight of that.
i now use time capsule and with the dual band noted an immediate improvement to the extent that i'm nicely wireless throughout my house. My sons use PS3 wirelessly and get a fast, stable connection all the time (16-18mg). I don't care too much that wirelessly might not be best option. It exceeds my needs .
You'll get alot of views from the guys on this forum - each with their own experiences and trials/errors - lots of good learning!!
cheers
AC

Similar Messages

My Iphone4 alarm stopped working since last two days. Is it the same issue which cropped up on Jan 1 2011? What is the way out?

my iphone4 alarm stopped working since last two days (31.12.2011). is it the same issue that cropped up last year on 1.1. 2011? what is the way out? and who should i turn to for support?

This issue was fixed in iOS5 - what is yours running?

What is the pin out connections of SCB 100

What is the pin out connections of SCB 100

Suresh,
Since the SCB-100 is a terminal block, its pin out is dictated by the DAQ device to which it is cabled. Thus, the pin out is available in the user manual for the appropriate DAQ device. Below, I have included a link to the location where the user manuals are available:
Manuals
Good luck with your application.
Spencer S.

What is the pin-out of the 4-pin audio connector

My brand new T440p has a single audio connector for both headset + microphone, similar to recent iphones and android phones. But although all use a 4-rings 3.5mm jack plug it seems that the signaling differs. So my question is:
Version1:
Tip: left audio
Ring1: right audio
Ring2: microphone
Sleeve: ground
Version2:
Tip: left audio
Ring1: right audio
Ring2: ground
Sleeve: microphone
Which of the above version is the Lenovo T440p using? This determines what kind of headset or y-adapter you can use with the laptop.
Thanks,
Simon

Hi,
You'll find the pin out of the 6220 in the M Series Help (User Manual). Just download the ZIP File from this webpage (http://digital.ni.com/manuals.nsf/webAdvsearch/DD0F3F9A89B8A84886256EE6006D520D?OpenDocument&vid=niwc&node=132100_US) and open the M Series Help.
Hope this helps.
Luca
Regards,
Luca

What's the state out of the box?

Got my board today. Going through the instructions at
https://ms-iot.github.io/content/SetupGalileo.htm and I'm confused. I try to apply the image to the SD card and am told that the card needs to be empty. Sure 'nuf looks like a full Windows install is sitting on it. Yet I'm being told in Setup to apply another
one - so what's on it?
I tried plugging it in to my PC via the Ethernet cable, etc, and the Galileo Watcher picks up nothing.
Following the instructions on Intel's site wants Arduino to be installed so the firmware can be updated - is this all accurate?
I get the feeling the Setup docs and How-Tos need some *serious* going over.
http://bc3te.ch/brandonh

The instructions seem fairly simple.
I'm not certain how you could be applying an image to an SD card and be told that the SD card needs to be empty when the instructions clearly state "Format the microSD card with the Fat32 file system" which would make the SD card empty.
And if the instructions are followed they probably work. I don't see anywhere in the instructions to use the microSD card OOB. Do you? Or is there some reason you feel the need to do that? Regardless of what the instructions say? Just because you have to
for no apparent reason? Or you cant plug the microSD card into your PC to see what the state of it is OOB?
Write Windows to the microSD card
Format the microSD card with the Fat32 file system.
Open an Administrative command prompt:
Open the Start screen
type cmd
right click or tap and hold on Command Prompt, then select
Run as Administrator
If you are running on Windows 7 please follow
these instructions before proceeding.
In the command window, type the following:
La vida loca

Why does firefox have yahoo by default as search engine?? It is very frustrating as I have tried everything but I am stuck with yahoo. i am sure explorer does not have to pay yahoo for ssuch such chep stunts. So what is the way out???

The previous versions of firefox had google by default, which was the best. But now it seems firefox needs money very badly so it has tied up with yahoo to have it as default search engine.
I have tried everything all that the volunteers have suggested but nothing works.
So what to do?? Dump firefox and go back to explorer??? Or can this be fixed????

Fix it easily.
follow the steps here:
[http://www.firefoxfacts.com/2008/01/13/change-default-search-in-firefox/ Change Default Search in Firefox]
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

What is the shortcut Out Point for FCP?

In Motion if your media is highlighted on the timeline your able to just press "I" or "O"
What is it in FCP?

Well, I and O work to create In and Out in FCP as well - though that creates In and Out for the Sequence if either the Timeline or Canvas is active, and not the clip.
In other words, FCP isn't designed to work the way Motion does. The closest approximation is the Time Edit Window (double-click on an edit point or press Command-7) then turn on Dynamic.
If you're looking to replicate the working behavior of Motion in the Timeline then, with the Edit Point selected, use the Extend Edit function (press the E key). I mean, if it's really that important.

What is the pin out for your PXI-2503?

Hello,
I have purchased a PXI-2503 analog switch, and I have been unable to find the pinouts for this device anywhere. I have connecting directly from the PXI-2503 into my board.

Hi Champ065,
If you have the NI-Switch drivers installed, then you can go to the NI-Switches Help. This can be found by clicking Start >> Programs >> National Instruments >> NI-SWITCH >> Documentation >> NI-Switches Help. When you open this up, navigate to NI Switches Help >> Devices >> NI PXI-2501/2503. From there, select your topology and you can see the pinouts on the right.
Please let me know if you have any problems finding this.
Thank You,
Nick F.
Applications Engineer

HT5622 When I try to download an app from app store, it is asking for Cloud ID and Password.....but though i submitted correct password...it is not allowing to download....stating "Password incorrect". What is the way out...!!

Suggest a way out for download an app, when phone shows a message-----password incorrect; though i gave correct password. Even i have logged into icloud and ensured the password is correct.

You may have to either sign in to the website to confirm your account details (or do that through iTunes on the computer) or go to iforgot.apple.com to reset your password again.

Hello, Last night my phone was stolen from the staff of the restaraunt i was eating at and wanted to know what is the best way to get my phone back? Or can you give me other options, please?

Hello, last night my phone was stolen from the staff of the restaurant i was eating at and wanted to know what is the best way of going about getting my phone back or do i have other options for a new Iphone, thank you very much.

Click here for information; you can also contact the restaurant.
Apple won't give you a discount on a new one, but your insurer or wireless carrier might.
(126630)

What is the best option to get a wireless connection please?

Hi, I have a 1.6 GHz G5 with Tiger (soon to install Leopard).
I currently have broadband through an ethernet cable but I want to set up wireless. My understanding so far is that I need either an airport card or an external device such as airport express (in the system profiler it says no info found under AirPort card).
Can someone please tell me if I am correct and if so, what is the best option to buy for my G5 model?
Thanks very much
Adam

BD, I declare an interest!
Look here if you would: https://discussions.apple.com/thread/4229088?tstart=60
I like the look of the one in your third link, but the only similar one I can find in the UK is this:
http://www.amazon.co.uk/Daffodil-LAN02-Wireless-Internet-Adapter/dp/B003FBVUH8/r ef=wl_it_dp_o_pC_nS_nC?ie=UTF8&colid=2QR3S4NSXNBE1&coliid=I2JD2YDHCMB4HH
but it comes with a 3 inch CD which is utterly useless to me!
If you can confirm that the MXP2802GU2 will work for me I will buy that!
TIA

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

Exporting photos for UHDTV or Native 4K TV, what are the best settings ? (File: Quality File: Color Space, Image Sizing and resolution) Or in other words; How can I get the smallest files but keep good quality for display on new UHDTV

You're welcome, and thank you for the reply.
2) Yesterday I made the subclips with the In-Out Points and Command-U, the benefit is that I've seen the clip before naming it. Now I'm using markers, it's benefit is that I can write comment and (the later) clip name at once, the drawback is that I have to view to the next shot's beginning before knowing what the shot contains.
But now I found out that I can reconnect my clips independently to the format I converted the master clip to. I reconnected the media to the original AVI file and it worked, too! The more I work with, the more I'm sold on it... - although it doesn't seem to be able to read and use the date information within the DV AVI.
1) Ok, I tried something similar within FCE. Just worked, but the file size still remains. Which codec settings should I use? Is the export to DV in MOV with a quality of 75% acceptable for both file size and quality? Or would be encoding as H.264 with best quality an option for archiving, knowing that I have to convert it back to DV if I (maybe) wan't to use it for editing later? Or anything else?
Thank's in advance again,
André

What is the best case to get for my new Macbook Pro

I just bought a new 15" Pro over the phone last week and according to the tracking it should be here by Wednesday. I am extremely excited and cannot wait to get my new machine (my first mac). But my question is, I want to protect it, what is the the best option, best case, or best sleeve, in order to protect my new investment?
Thank you in advance for any comments.

I saw this today when researching the same thing
Mouse over the pictures for a side view.
http://www.radtech.us/Products/MacTruck.aspx
(no comp)

What is the best way to safeguard my files and pictures before I send off my MacBook Pro to get fixed?

What is the best way to safeguard my files and pictures before I send off my MacBook Pro to get fixed? I am running Mavericks and use an AirPort Time Machine to back-up all my files.

Back up all data on the internal drive(s) before you hand over your computer to anyone. You need at least two independent backups to be completely safe. There are ways to back up a computer that isn't fully functional—ask if you need guidance.
If privacy is a concern, erase the data partition(s) with the option to write zeros* (do this only if you know how to restore to an empty drive.) Don’t erase the recovery partition, if present.
Keeping your confidential data secure during hardware repair
Apple also recommends that you deauthorize a device in the iTunes Store before having it serviced.
*An SSD doesn't need to be zeroed.

I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

I have Logic Pro 8.0.2 and would like to upgrade. I'm running OS Lion on a 2010 MacB Pro. What is the best option? Logic Pro 9 App or Logic Studio? Can't find upgrade price. Or should I just stay with Logic 8?

Same here, I have Logic Studio 8 and wouldn't mind staying with that version, except that the installer won't run on my new Macbook Pro as PowerPC apps are no longer supported. That's the message I get in any case.
I use to run Logic on a 2006 Macbook Pro.
I guess that makes me a very unhappy Apple user! I've been using Logic from the Emagic days, bought every upgrade only to see Apple kill what used to be one of the best Pro Audio application. Imagine if they had done the same to Photoshop, there would be a lot of unhappy designers out there
Paying the full price for years to slowly see your daily app go down in price & efficiency until it's given away at $199 for semi pro users. Well, at least ProTools is stil alive & kicking so I guess that's the way forward now.
This is coming from someone that never ever used a Windows machine to make music! Life is good still!

What's the best option to get the best out of my h...

Similar Messages

Maybe you are looking for