What's The Best Output Setting?

Well, choosing the "best" Export/Share setting for output, is a bit science, a bit art, and often a bit of testing.
File Size rests primarily on Bit-Rate, which roughly is = to "quality," and then the Project's/Sequence's Timeline Duration. It can become a delicate balancing act between quality vs file size. The amount of motion, especially off-axis motion, would be where to look for ultimate qualtiy, established by Bit-Rate. Lower motion footage, will still look good,at a lower Bit-Rate, but only the editor, or the client, can make the final determination.
For some general discussion, see this Adobe FAQ Entry.
Note: the above is focused on Premiere Pro, but most applies directly to PrElements, as well. However, the term for Export is now in PrE's Share Tab, while Export is the term used for either direct output,or output through AME (Adobe Media Encoder).
Hope that helps one determine the best output setting for their material.
Hunt

Similar Messages

What is the best Compressor setting for best quality video playback on an iBook g4?

I know the iBook and G4's in general are very outdated today, but I need to ask anyways. I have some video projects in 720p and 1080p in which I have down converted to 480p and also exported to MPEG-2 for DVD (personal wedding videos and videos made for my clients using Final Cut Studio). Anything encoded at most resolutions using h264 won't play on my iBook. Even 480p.
I have about 20 hours of mixed video content that I need it in a format that is suitable for an iPhone 4 and an iBook 12" with a 1.2GHz G4, 1.25GB RAM and I added a 250 WD 5400 IDE hard disk (running 10.5.8 and 10.4.11 for Classic Mode). I know the iBook doesn't seem like the best tool for modern video playback, but I need to figure out which setting will play best with iPhone 4 and iBook so I don't need to make 2 local copies of each video for each device.
The iBook plays best with the original DVD output MPEG-2 file and playing back in QT Pro or VLC... but I already have 180 GB's of MPEG-2 files now and my little HD is almost full. I don't have enough room to convert all the iPhone 4 counterparts. If I use Compressor 3.5.3, what is the optimal setting for iBook and iPhone .m4v or .mp4 files that can play on both devices? So far 720x400-480 widescreen videos @ 29fps works great on my iPhone, Apple TV 2, and other computers but seems to murder my poor iBook if encoded with high profile (and still choppy on simple profiles). 640x480 (adding black matte bars to my videos) plays fine in MPEG-2 but drops frames or goes to black screen if I convert it to mp4 (and looks bad on the iPhone 4 because of the matte). But if I convert on any of the simple profiles, it looks terrible on my iPhone 4 and a blocky on the iBook.
This is the problem leading me to having 2 copies of each video and eating my hard disk space. What is the best video setting for both playback on the iBook and iPhone 4? Can the iBook playback H264 at all in decent resolutionsat all? I don't really want to have a 480p .m4v collection for the iPhone 4 and a MPEG-2 RAW collection just to play the same videos on the iBook.
Any suggestions are greatly appreciated! Thanks!

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

What is the best export setting from QuickTime Pro 7 for standard DVD

I have several AVI movies I took and want to import them into iMovie, so I can create a DVD that will play in any DVD player or computer. (Along with a bunch of pictures.)
Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
I have export them using *_QuickTime 10_* and QTP7 to *MOV, MP4, & M4V* and the output is *+bad bad bad+*.
I have tried both export and save-as. Neither has done a good job.
The internal information of the AVI movies are: (as reported by QT)
Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
I have used several settings with not much luck including:
AAC, Stereo (L R), 44.100 kHz, MPEG-4 (Perian), 640 x 480, Millions
MPEG-4 Video, H.264
Should I be using a better application then QuickTime?
Is there a way to just use iDVD with the original AVI movies?
These are wedding movies and pictures that people are waiting for.

Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
That depends on your specific work flow and the codec(s) involved. Generally speaking, if the file plays in the QT Player and is "conversion" compatible, then the file can be added directly to iDVD (i.e., unlike iMovie '08/'09/'11 which requires the file to be "edit" compatible with QT).
I have export them using QuickTime 10 and QTP7 to MOV, MP4, & M4V and the output is bad bad bad.
The quality of your output file will depend on a number of things: primarily the quality of your source file, the efficiency of the target codec, and the specific settings used. (About which you did not elaborate.) The rule of thumb here is that your output will never be better than your input and each re-comprssion of the data has the potential to degrade the quality to some degree.
I have tried both export and save-as. Neither has done a good job.
The "Export" option re-compresses the data while the "Save As..." option only places the original data in an MOV file container. So if this output is "bad, bad, bad," then I suspect your source file(s) are not of high quality to begin with. (This seems to be confirmed by the very low audio sampling rate which implies the video data rate was probably also low to conserve file storage space.)
The internal information of the AVI movies are: (as reported by QT)... Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
The basic codecs here appear to be both playback and conversion compatitible with QT (other than the very low sampling rate which some QT apps may not like). Thus, if your work flow is to simply burn DVDs that can be played on commercial players, the AVI could most likely be dropped to iDVD for authoring. On the other hand, if you are editing in a recent version of iMovie, then that app may not like the AVI file container. In this case, the best quality you can likely expect would be to use the "Save As..." option to place the data in an MOV file container and import to iMovie.
Unfortunately, editing in iMovie '08/'09/'11 is done "by reference" which means your output file will be created by exporting the impoted source data to another compression format. The default would be H.264/AAC which is a highly compressed format which in turn would be re-compressed again by iDVD to multiplexed MPEG2/PCM content further reducing quality by using a less efficient video codec. My recommendation for export from iMovie in this case would be AIC/Linear PCM. (I.e., to export your edits to the Apple intermediat video codec using the original file size and frame rate with just a bit of "sharpening" and using 16-bit/48 kHz Linear PCM audio (which is what will be used to create the DVD).
Should I be using a better application then QuickTime?
How much are you willing to spend?
Is there a way to just use iDVD with the original AVI movies?
Yes. Simply create a new SD project, select your theme, drop the compatible AVI content to the appropriate "drop" area(s), add photos as desired, preview the results, and author the DVD if/when satisfied.

What is the best export setting for video on blogger

What is the best export setting for video from premeire to blogger.com or blogspot.com

I have not been able to find the technical limits/specs for the site Blogger or blogspot.com. That is why I made the post here thinking some Adobe users may have experimented already and come up with good export settings for AVI DV video to a format optimized for Blogger.

What is the best display setting to use with a sanyo projector for Mac OS x 10.8.3

What is the best display setting to use with a sanyo projector for Mac OS x 10.8.3

You would use whatever the native settings for the projector are.
Regards.

What is the best compressor setting to use ... when exporting a 720p timeline from FCP for a project that will only be played back in a standard def monitor?

What is the best compressor setting to use for DVD StudioPro ... when exporting a 720p 30 timeline from FCP for a project that will only be viewed in a standard def monitor?

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

What's the best output format to burn a dvd with?

what's the best output format to burn a dvd with? I normally select a h264, but i don't know which preset i should use (between "match source high bitrate and hd1080...)

A DVD is Standard Definition... export using the MPEG2-DVD preset and import the TWO (audio and video) files in Encore for authoring
CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173

What is the best compressor setting for dvds

What is the best compressor setting for dvds that is not for HD dvd players? I used "DVD Best quality 90 min" and changed the GOP setting to 7.5 and my dvd looks terrible. the text is blurry and the colors are bad.

correction the bit rate is 7.5

What is the best QT setting for iDVD?

Hi
I am making a Quicktime movie from a cut in Media 100. What is the best format to export for iDVD? I already tried exporting DV/DVC Pro - NTSC and it didn't look all that great (flickering and rippling on the DVD player.)
I am currently trying a straight best quality NTSC Video export. My cut is about 7:45.
thanks
JB
Dual 2 GHz PowerPC G5 Mac OS X (10.3.9)

Hi John:
Welcome to discussions!
I would use QuickTime Pro export settings, choose 'NTSC-DV' with a frame rate of 29.97. Choose 'No Compression' for audio and set the rate to 48.000 kHz.
Sue

What is the best display setting to have it on when connected to a TV?

I just bought a mini dvi adapter and I was wondering what the best display setting was to make it as clear as a possible.
I have it connected to a 52 in screen.
Thanks,
Sam

The best display setting is actually its native screen resolution, usually the max resolution is the native one, but double check it with the TV respectively site to get more accurate technical answer.
Good Luck.

What's the best output for burning to HD DVD

I'm working on some projects that I would like to burn to HD DVD. The original footage is captured with a AVCHD camera at 1920x1080 (highest setting) then ingested to Apple Intermediate Codec 1920x1080 to retain the highest quality. Now I want to output them and burn to an HD DVD using Toast 9 to retain the highest quality and avoid re-encoding the data. What would be the best settings to use to export from FCE?
Thanks,
John
(BTW - Yes, I know HD DVD is a dead format but I've got a player and the ability to burn playable HD Discs so it's still a viable format for me!)

Thanks Tom,
That was the first thing I tried and it came out Format : Apple Intermediate Codec, 1440 x 1080 (1888 x 1062) with Normal Size: 1920 x 1080 pixels (I'm reading form QuickTime Inspector here.)
So I'm confused. Which resolution is it really? If it is 1440x1080 am I losing quality in the down-rez?
Beyond that, I take what you're saying is that using this output it will only get encoded once going to the DVD. Is that correct?
Thanks,
John
Message was edited by: mojojones

What is the best output for archiving in Quicktime?

Hi,
I'm producing webvideo. The video's are converted to quicktime and dropped on a videoserver and converted to flash.
The most important footage is archived to tape but I'd like to archive all the output. What is in your opinions the best setting for output in quicktime with less space and enough quality to use again in webvideo. Final use will be 800kb flash video.

You should archive the material in it's native format so that you have the possibility to revisit the project and make changes or generate master files in other formats.
Use the Media Manager to consolidate your project into a single enclosing folder. This can be compressed into a .zip file or disk image. It will save space if you dont include render files, even more if you make the material that came from tape, offline -although you will have to recapture in that case.

What is the best home set up for a family to share/use apple products

Hi, I am relatively new to apple (have an iPad) and having been a PC user for years I was pleasantly surprised with the apple experience and am now trying to work out the best set up for me, my husband and young son as I am buying them both of them apple products this Christmas. New Mac laptop/ ipad for hubby and then an ipod touch for my son oh and a new mac laptop for me. We are also thinking of moving from Blackberries to iPhones. Yes we seem to be hooked! but i am unsure about the home family set up and how to replace my PC network that I run off an 8TB server.
In reading the forums I keep seeing people talk about problems they have with two apple IDs and trying to merge them. I have also heard about a family ID allowing us to share apps legally. I am really nervous of setting us up wrong and then having problems later and hence i am now looking for some advice on how to share as much as we can legally but also make usage practical and not invading each others privacy. thoughts so far:
Music - I think we are happy to share the same music and access using one ID (we currently don't buy much music from apple but have lots of CDs we share).
Photos - It would be nice to share photos - as long as my son or husband cannot accidentally delete photos of mine (which is my biggest concern). I currently load all camera photos onto my 8TB storage box as the network owner and my husband has full access to copy any photo to his laptop but can never delete the original copies by accident.
Apps - If possible i would like us to share these but they are cheap enough these days to separate if really needed. Would be good to share licence for pages etc though
cloud, contacts, facetime, email - this is what is making me consider separate IDs or learning how to have multiple users in one apple ID - I do not want to have to share synced contacts with my husband. I have near 300 contacts now through work etc and he will not want them plus i will not want his or him being able to delete mine by mistake. and then for email and facetime, well I want to give him his privacy so I do not receive his messages etc. especially now that we are considering switching to iPhones
Then last but not least, i don't know the best solution for my son. he is only 7 years old so even though I don't want to pay for things again I don't want him being able to download "just any" app from the purchased icon in Appstore. Also, is there a child friendly setting to prevent him from viewing inappropriate content on the internet?
Appreciate I have asked a lot of questions here but I am looking for any genuine advice out there. Thank you in advance to any potential advisers.

Welcome to the Apple Community.
You don't need to use the same ID on a device for iCloud and iTunes.
iCloud covers mail, contacts, calendars, reminders, notes, bookmarks, photostream, document syncing etc and for these I recommend you each have your own ID's, this will stop others from having access to and likely more importantly being able to edit or even delete your personal information.
Someone of Age needs to be responsible for an account, so for younger children you will need to create and be responsible for an account yourself but let the child use it.
For iTunes you could use a single account so everyone can share music and apps or you could use separate accounts (there are ways to share content between users, Apple provides homesharing to do this).
When choosing how to proceed with iTunes, it might be worth remembering that someday your children will reach 21 (or whatever age they feel they have become independent) and will likely want their own account, changing accounts later may make it difficult to access previous content.
Photostream now has shared albums, so you can share just what you want with others. Shared photos using shared albums cannot be deleted by others with different accounts, but if you all shared the same account they could be.
Facetime and messages can also use an ID independently of each other, iCloud and iTunes. Separate ID's are recommended for these, joint accounts can be problematic.
iTunes has parental controls for youngsters, however at 7, I suggest you don't reveal the password to him and enter it yourself when he needs to purchase something, otherwise you may receive unexpected bills.

Can FCP directly output to Beta Cam? if not what is the best output result?

I wonder which way is the best result to output the video to beta tape for TV broadcasting. I used firewire to DV but once the TV station dup to beta, the picture gettin worst.

Thinking of CBD as hockey director...
"I'll take some of that! More of this! And less of those!
"I want them now! I want it yesterday! And stay awake because the requirements will change tomorrow!"
On a more serious note...
I searched around for a beta sp deck that takes fire wire in and could not find one.
It strikes me that if you (Cantonpro) are already using an iMac you are either sharing the firewire bus, or placing media on your system drive. As noted, neither of these situation are recommended.
However, if you are on the system drive, then an AJA IO might be a possibility, but almost $2000 plus deck rental seems a bit steep, especially since the capabilities of the AJA would be limited by the iMac. Maybe a higher end canopus converter like this one,
http://www.canopus.com/products/ADVC500/index.php
but you are still talking almost $1500 plus deck rental. This solution is a bit more appropriate if you plan on staying with the iMac.
There are less expensive options that rely on composite video, but then you may as well have the station do the conversion.
Maybe you should contact a local dub house and see what they have to say, or find out if anyone near you has this equipment already.
Or, if your work is generating profit, and your business would benefit from the higher quality on-air, start to upgrade your hardware so you will see greater returns in the future.
Tom

HT4110 What is the best battery setting for the MacBook Pro 13 Retina display?

I want to know the best setting for the battery for the MacBook Pro 13 Retina display.

To add just a little
Keep it plugged in when near a socket so you keep the charging cycles down on your LiPo (lithium polymer) cells / battery, but not plugged in all the time. When not being used for several hours, turn it off.
And best "tip" is if its near a socket,...plug it in as long as you can (especially at home) since cycle count on the battery are the "miles that wear out the tires (battery)", however again, not plugged in all or most of the time.
http://www.apple.com/batteries/notebooks.html
"Apple does not recommend leaving your portable plugged in all the time."
General rule to remember of Lithium batteries is:
Never drain them LOW & dont always/often store them HIGH
While cycle count is commonly seen to be the “miles” on your Lithium Ion pack cell in your Macbook, which they are, this distinction is not a fine line at all, and it is a big misconception to “count charge cycles”
*A person who has, for example, 300 charge cycles on their battery and is recharging at say 50-60% remaining of a 100% charge has better battery usage and care than another person who has 300 charge cycles at say 15% remaining on a 100% charge.
DoD (depth of discharge) is far more important on the wear and tear on your Macbook battery than any mere charge cycle count. *There is no set “mile” or wear from a charge cycle in general OR in specific.    As such, contrary to popular conception, counting cycles is not conclusive whatsoever, rather the amount of deep DoD on an averaged scale of its use and charging conditions.
                          (as a very rough analogy would be 20,000 hard miles put on a car vs. 80,000 good miles being something similar)
*Contrary to some myths out there, there is protection circuitry in your Macbook and therefore you cannot overcharge it when plugged in and already fully charged
*However if you don’t plan on using it for a few hours, turn it OFF (plugged in or otherwise) ..*You don’t want your Macbook both always plugged in AND in sleep mode       (When portable devices are charging and in the on or sleep position, the current that is drawn through the device is called the parasitic load and will alter the dynamics of charge cycle. Battery manufacturers advise against parasitic loading because it induces mini-cycles.)
Keeping batteries connected to a charger ensures that periodic "top-ups" do very minor but continuous damage to individual cells, hence Apples recommendation above:   “Apple does not recommend leaving your portable plugged in all the time”, …this is because “Li-ion degrades fastest at high state-of-charge”.
                    This is also the same reason new Apple notebooks are packaged with 50% charges and not 100%.
LiPo (lithium polymer, same as in your Macbook) batteries do not need conditioning. However...
A lot of battery experts call the use of Lithium cells the "80% Rule" ...meaning use 80% of the charge or so, then recharge them for longer overall life.
Never let your Macbook go into shutdown and safe mode from loss of power, you can corrupt files that way, and the batteries do not like it.
The only quantified abuse seen to Lithium cells are instances when often the cells are repeatedly drained very low…. key word being "often"
Contrary to what some might say, Lithium batteries have an "ideal" break in period. First ten cycles or so, don't discharge down past 40% of the battery's capacity. Same way you don’t take a new car out and speed and rev the engine hard first 100 or so miles.
Proper treatment is still important. Just because LiPo batteries don’t need conditioning in general, does NOT mean they dont have an ideal use / recharge environment. Anything can be abused even if it doesn’t need conditioning.
From Apple on batteries:
http://support.apple.com/kb/HT1446
http://www.apple.com/batteries/
Storing your MacBook
If you are going to store your MacBook away for an extended period of time, keep it in a cool location (room temperature roughly 22° C or about 72° F). Make certain you have at least a 50% charge on the internal battery of your Macbook if you plan on storing it away for a few months; recharge your battery to 50% or so every six months roughly if being stored away. If you live in a humid environment, keep your Macbook stored in its zippered case to prevent infiltration of humidity on the internals of your Macbook which could lead to corrosion.
Considerations:
Your battery is subject to chemical aging even if not in use. A Lithium battery is aging as soon as its made, regardless.
In a perfect (although impractical) situation, your lithium battery is best idealized swinging back and forth between 20 and 85% SOC (state of charge) roughly.
Further still how you discharge the battery is far more important than how it is either charged or stored short term, and more important long term that cycle counts.
Ultimately counting charge cycles is of little importance. Abuse in discharging (foremost), charging, and storing the battery and how it affects battery chemistry is important and not the ‘odometer’ reading, or cycle counts on the battery.
Everything boils down to battery chemistry long term, and not an arbitrary number, or cycle count.
Keep your macbook plugged in when near a socket since in the near end of long-term life, this is beneficial to the battery.
Peace

What's The Best Output Setting?

Similar Messages

Maybe you are looking for