What's the best type of case that really good for maintaining iPhone' temperature?

Feel free to answer, answering means helping and it means you are not only helping me , but the other. CHILLSS

Sorry. I've never seen a phone case designed to maintain a specific temperature.

Similar Messages

  • What's the best way to detect that text fits into ContainerControllers without scrolling?

    Hi.
    Question
    What's the best way to detect that text typed by user (or added programmatically) exceeds available container space and find out where starts truncated part? Is there available some other (than described bellow) easy way to detect it or disallow set of controllers to receive more characters that can be displayed in given composition area?
    My partialy failed attempt (simplified)
    For example lets say that I've got an editable textflow with attached two instances of ContainerController.
    var flow:TextFlow = createSomeFlowFromGivenString(sampleText),
        firstController = new ContainerController(firstSprite, 100, 30),
        lastController = new ContainerController(secondSprite, 600, 30);
    flow.interactionManager = new EditManager(new UndoManager());
    flow.flowComposer.addController(firstController);
    flow.flowComposer.addController(lastController);
    flow.flowComposer.updateAllControllers();
    With enabled vertical scroll policy I can compare height of the composition in last controller with height of the content:
    var bounds:Rectangle = lastController.getContentBounds(),
        overflow:Boolean =  lastController.compositionHeight < bounds.height;
    trace('Content does not fit into given area?', overflow)
    But when I switch vertical scroll policy off (lastController.verticalScrollPolicy = ScrollPolicy.OFF) - unfortunately this no longer works...(In my case scrolling should be dissabled, since text areas might have only one line with restricted width)
    Use case
    I want to create fillable form. Field might have a single or multiple lines. One field might start in the middle of the page, continue in the next line where it spreads through whole page and end in the - quarter of page width long  - third line. Text typed by the user can't exceed given area since it might cover some static text that sits right after/below field.
    Something like ascii image bellow:
    |                <PAGE>                    |
    |                                          |
    |                                          |
    |                                          |
    |               [Field starts here........ | 
    | ........................................ |
    | ........................................ |
    | Ends here..]                             |
    |                                          |
    |                                          |
    | [Another field] xxxx  xxxx xxxxxxxx x xx |
    | xxxxxxxxxxxxxxxxxxx                      |
    |                                          |
    |                              [One more.. |
    | .....]                                   |
    |                                          |
    |                                          |
    |                                          |
    |                                          |
    |                                          |
    |                                          |
    |                                          |
    |                                          |
    Info:
    [......]  <-- form fields starts with '[' character, and ends with ']'
    xxx       <-- sample, static text
    | and _   <-- page borders

    I've tried something like that previously, but it didn't work because then I've got vertical scroll policy to set to 'auto'. After changing verticalScrollPolicy to ScrollPolicy.OFF  in the last container it worked like a charm.
    Thanks zhen bian

  • What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

    What is the best USB powered portable 1TB hard drive for a macbook pro that allows Time machine to work, windows (thru Parallels software) and mac storage and is available in Australia?

    I agree with teh OWC sggestion above, but why must it be USB powered? I find that far more unreliable, and the low power devices slow.
    I'd frankly get a good external enclosure and buy a bare drive.  But the OWC stuff is quite good - vastly better than some of the majors (WD being aprime example of stuff that's boderline quality and often not compatible)
    Grant

  • I have a Pages file that I would like to make secure. What's the best way to do that?

    I have a Pages file that I would like to make secure. What's the best way to do that?

    Inspector  > Document > Document > Require password to open
    Peter

  • What is the best type of server can I set up on open directory?

    hi.
    I have a win 2000 terminal server and a xserve with mac os x server 10.4.
    After some problem I have decide to reinstall mac os x server and now I want to tell you what is the best type of server can I set? (to use windows 2000 terminal server)
    I refer to open direcotry service!
    do you advase Standalone Server? or Master?
    or do you advise a Connection to a Directory System?
    I have this doubt.
    thanks a lot

    is it not clear?

  • I used MobileMe/idisk to hold all of my files and access from my iPad.  It worked beautifully.  What is the best way to do that now?

    I used MobileMe/idisk to hold all of my files and access from my iPad.  It worked beautifully.  What is the best way to do that now?
    In particular, I am having issues with documents that already exist on my Mac and trying to get my iPad to access them. 

    A popular option seems to be DropBox.

  • I bought a new computer and want to transfer pics from a regular folder to the new computer.  What's the best way to do that?

    I bought a new computer and want to transfer pics from a regular folder to the new computer.  These aren't in the cloud so they didn't transfer automatically.  What's the best way to do that?  Can I sync my old computer to my new computer through I tunes and transfer them that way?

    iTunes will only transfer them to your iPad, and once transferred to your iPad they cannot be imported to your other computer (only camera roll photos can).  You will either have to use a usb flash drive or external drive to transfer them, or use an app like PhotoSync, which will transfer photos between your devices and computers over your wifi.

  • What is the best export setting from QuickTime Pro 7 for standard DVD

    I have several AVI movies I took and want to import them into iMovie, so I can create a DVD that will play in any DVD player or computer. (Along with a bunch of pictures.)
    Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
    I have export them using *_QuickTime 10_* and QTP7 to *MOV, MP4, & M4V* and the output is *+bad bad bad+*.
    I have tried both export and save-as. Neither has done a good job.
    The internal information of the AVI movies are: (as reported by QT)
    Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
    I have used several settings with not much luck including:
    AAC, Stereo (L R), 44.100 kHz, MPEG-4 (Perian), 640 x 480, Millions
    MPEG-4 Video, H.264
    Should I be using a better application then QuickTime?
    Is there a way to just use iDVD with the original AVI movies?
    These are wedding movies and pictures that people are waiting for.

    Should I convert them with QuickTime Pro 7 (QTP7) to another format, and if so, what is the best export setting.
    That depends on your specific work flow and the codec(s) involved. Generally speaking, if the file plays in the QT Player and is "conversion" compatible, then the file can be added directly to iDVD (i.e., unlike iMovie '08/'09/'11 which requires the file to be "edit" compatible with QT).
    I have export them using QuickTime 10 and QTP7 to MOV, MP4, & M4V and the output is bad bad bad.
    The quality of your output file will depend on a number of things: primarily the quality of your source file, the efficiency of the target codec, and the specific settings used. (About which you did not elaborate.) The rule of thumb here is that your output will never be better than your input and each re-comprssion of the data has the potential to degrade the quality to some degree.
    I have tried both export and save-as. Neither has done a good job.
    The "Export" option re-compresses the data while the "Save As..." option only places the original data in an MOV file container. So if this output is "bad, bad, bad," then I suspect your source file(s) are not of high quality to begin with. (This seems to be confirmed by the very low audio sampling rate which implies the video data rate was probably also low to conserve file storage space.)
    The internal information of the AVI movies are: (as reported by QT)... Format: Apple OpenDML JPEG, 640 x 480, Millions, 8-bit Unsigned Integer, Mono, 11.024 kHz
    The basic codecs here appear to be both playback and conversion compatitible with QT (other than the very low sampling rate which some QT apps may not like). Thus, if your work flow is to simply burn DVDs that can be played on commercial players, the AVI could most likely be dropped to iDVD for authoring. On the other hand, if you are editing in a recent version of iMovie, then that app may not like the AVI file container. In this case, the best quality you can likely expect would be to use the "Save As..." option to place the data in an MOV file container and import to iMovie.
    Unfortunately, editing in iMovie '08/'09/'11 is done "by reference" which means your output file will be created by exporting the impoted source data to another compression format. The default would be H.264/AAC which is a highly compressed format which in turn would be re-compressed again by iDVD to multiplexed MPEG2/PCM content further reducing quality by using a less efficient video codec. My recommendation for export from iMovie in this case would be AIC/Linear PCM. (I.e., to export your edits to the Apple intermediat video codec using the original file size and frame rate with just a bit of "sharpening" and using 16-bit/48 kHz Linear PCM audio (which is what will be used to create the DVD).
    Should I be using a better application then QuickTime?
    How much are you willing to spend?
    Is there a way to just use iDVD with the original AVI movies?
    Yes. Simply create a new SD project, select your theme, drop the compatible AVI content to the appropriate "drop" area(s), add photos as desired, preview the results, and author the DVD if/when satisfied.

  • What is the best USB 3.0 (small) ext HDD for recording my music on

    Hello everybody!
    i start with saying...........
    A Happy Newyear!!!!!
    I wish you all the very best and love.
    Now for my question.
    I would like to know what is the best portable usb 3.0 external HDD for recording my music on.
    Because since today i am a very happy new owner of the new Retina Macbook Pro 2.3 GHz, with 8 GB of Ram and 256 GB of Flash.
    .... and yes it has the Samsung Retina Display
    Since 8 years i use Logic Pro and because the flash is only 256 Gb i want to record on a external drive
    and not on the internal storage (and especially now with usb 3.0).
    But i would like to know what is the best portible external HDD for this function.
    500 GB is enough for me because i have 2x a 2 TB for my Mac Pro and Macbook pro where i make back ups from all my music (2 back ups just to be safe).
    Some Examples i saw:
    - WD My passport USB 3.0 - 500 GB harde schijf
    - G-Technology 500GB G-DRIVE Slim USB 3.0-harde schijf
    - LaCie 500GB Rugged Triple USB 3.0 externe harde schijf
    - Freecom Mobile drive mg 500 GB harde schijf
    - Western Digital My Passport Essential SE USB 3.0 500 GB harde schijf
    I would really like some good advise in this.
    Hope you guys can help me out with this.
    Greetings,
    Glenn Cornelisse
    Gaya Productions Studio
    The Hague, Netherlands

    I cannot speak specifically about any of those Ext HDs because i don't own any of them..
    But...
    Make sure the external drive is 7200rpm.... and not 5400rpm or a 'green' drive with something called "varipower' or a similar name...

  • What is the best edge to edge glass screen protector for iPhone 6

    What is the best edge to edge glass screen protector for iPhone 6

    none of the ones at the link below are glass - they are all film - if you are looking for glass i know of several options
    Zeos - www.zeosdirect.com
    Crown - www.bodyguardz.com
    Moshi - www.moshi.com
    i think Zagg may have one www.zagg.com
    and im sure there are others
    search Amazon for iPhone 6 tempered glass screen protectors

  • What is the best free word processing or office program for OS X Mountain Lion

    What is the best free word processing or office program for OS X Mountain Lion?

    "Best" is quite subjective. As William points out, TextEdit may be the "best" in someones eyes as it isn't cludged up with crap you don't need.
    What are your requirements?
    Basic text editing?
    Do you need:
    Table of Contents
    Index
    Footnote/endnote management
    Different headers/footers
    Page Layout
    What are you going to use it for?
    Technical Reports
    Screenplay
    Leaflets and newsletters
    Coding

  • What is the best video editing software i can get for a macbook pro without slowing my computer way down

    What is the best video editing software i can get for a macbook pro without slowing my computer way down. I need it to be able to take hd videos. With the camera i got i can't even upload my videos to imovie.

      MacBook Pro
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/mac_os?view=discussions
    http://www.apple.com/support/macbookpro
    http://www.apple.com/support/
    http://www.apple.com/support/iphoto
    You stumbled on a Mac Tower forum, not notebooks.
    If you are running 10.6.8 then you must have bought it 3-4 yrs ago?
    Might want to check the specs and then look at various programs and their requirements as to whether Final Cut Express and ah, you want to import media to an app, not "upload."
    http://www.apple.com/support/imovie
    http://www.apple.com/support/finalcutexpress
    Checked AppStore, Google or even the forums for various Apple programs.

  • TS1324 What is the best way to sync my Outlook 2010 to my iPhone and iPad

    What is the best way to sync my Outlook 2010 to my iPhone and iPad.

    Note, I'm on the latest iOS - not 6.1.1 as the original post suggests.

  • What is the best audio or voice audio recording app for iPhone 5 because I want to record audio at a book signing event this coming Tuesday!!!

    What is the best audio or voice audio recording app for iPhone 5 because I want to record audio at a book signing event this coming Tuesday!!! Please get back to me as soon as you can! Thanks

    Ok sorry to bug ya again but if I use the voice memos app if I have the screen locked and just on my belt clip on my side of my pants will it still pick up the authors voice and do I need to have all the volume turned all the way up for it or do I get the app u said for better sound?

  • What is the best way to make PSD into HTML for emails

    What is the best way to make PSDs into HTML for emails? Will the new feature in Dreamweaver work for emails as well? I am using Cheetah mail, but I need to be able to turn PSDs into HTML so I can use it in Cheetah mail.  I have a general idea of how to do this, but I'm stumped about where to begin.

    Use PShop for images only.  Use DW to create your tables and inline CSS styles.
    Many e-mail clients do not show images for security reasons.  So graphics heavy e-mails are not an optimal way to communicate with your mailing list.
    See Alt-Web Articles, HTML E-mails and Newsletters
    Nancy O.

Maybe you are looking for

  • How to deploy a war file on Weblogic Server 7.0??

    Hello Everyone I am trying to deploy a servlet on Weblogic Server 7.0 as a WAR file. Can anyone of u plz tell me the steps required to do that. I am posting this question on EJb forum and not on servlets coz this is not a servlet problem, rather this

  • Paste function no longer works for me.

    I have only noticed in the past couple of days that the 'paste' function when I right-click no longer works, it's greyed out. I can copy no problem but when it comes to pasting it, I can't get it to work. I have tried 'ctrl+v', that doesn't work for

  • I dont know how to set a site setup and edit some ready html files

    how to set up a site in dreamweaver when using a WAMP SERVER and edit some html files

  • Site Manager Menu option not there

    I watched the BC gurus tutorial and looked at online docs. There is no Site Manage> Menu option in the manage area for this site. It makes it impossible to add or modify menus. The Content Holder gives no options to create specifically a menu. This h

  • ClassNotFound error during applet inititalization

    I have developed an applet that uses HTTP tunneling to read a list of report entries in a form of a Java Collection. This applet is initiated in a browser window via the <applet> tag. The servlet runs under Tomcat. When both the servlet container and