What's the best way to apply a detuned effect to a piano (audio or midi)?

Hi, what's the best way to apply a detuned effect to a piano (audio or midi)? I was trying to add the detune effect to a piano to make it sound warmer and old fashioned, any suggestion?
Thanks

Are you looking for a Honky Tonky Piano effect?
you need two istances of the same piano (exs24 Logic patch are great)
use fine detune (pitch) only one of the two piano istances.
G

Similar Messages

What is the Best way to apply granular password policy

I am trying to apply Fine Grain Password Policy in small groups to my users, I have set the password expiry to 10 days
for testing. But the moment I apply the policy, users start getting password change notifications immediately, Outlook or
Lync start asking for a new password.
Should it not wait for 5 days to start poping-up on the clients that they have 5 days left to change there passwords.
What is the best I can do not to disturb the users, I cannot do this at night because most users have mobile devices. Windows 2012

Hi Petro,
In addition to Mihai's answer, also consider checking/changing the 'Interactive logon: Prompt user to change password before expiration' which by default is 14 days. I think there is a default notice period of 5 days but for Windows 7 or 2008 R2
servers that don't have a Group policy overriding the local policy (not domain joined). I am not sure how that applies to 2012. So if you haven't changed that to 5 days, it might be the cause of the problem.
On a PSO object I don't think you can set the password change notification.
The settings can be found in Computer Configuration\Windows Settings\Security Settings\Local Policies\Security Options\Interactive logon: Prompt user to change password before expiration.
References:
http://technet.microsoft.com/en-us/library/jj852243.aspx- Interactive logon: Prompt user to change password before expiration
http://technet.microsoft.com/en-us/library/cc770842(v=ws.10).aspx - PSO Step Guide
http://mariusene.wordpress.com/

What is the best way to apply a template to the rebranded partner site?

My partner site got severely jacked up when I was brand new to BC.
Since then I've overwritten it in Muse while attempting to "try' it as well.
Apparently does some "cleaning" meaning the template files I once had access to in the templates folder got deleted. bleh.
Is there a quick way to apply another template I own to that site such as publishing a trial site and re-pointing dns or anything that direct and smart; or is the only way to do it a manual, one by one by one of files, modules, content holders and so on?

Hey there,
If you want to access those partner site templates, layouts and everything else, here are some FTP details you can use:
host: maxdesigncompany.businesscatalyst.com
username: maxdesigncompany.businesscatalyst.com/[email protected]
password: password
Feel free to log in through FTP and download the whole site. All the modules should work since the module IDs on your site will match those on this site.
Cheers,
-mario

What is the smartest way to apply green screen effects in premiere elements for mac?

Videomerge looks messy and difference matte kills the foreground and difference video entirely, leaving only the background

Mike Way Jr
What version of Premiere Elements are you using on your Mac computer?
Did you apply the Difference Matte write up that I posted? Many Premiere Elements Windows and Mac users have reported using the technique described for Green Screen.
http://www.atr935.blogspot.com/2013/05/pe11-difference-matte-as-substitute-for.html
I have not heard of any alternative for the Premiere Elements Mac user other than go Premiere Elements Windows.
Please review and let us know the outcome.
Just not to take anything for granted, I ask "Have you reviewed your green screen prep work?"
Thank you.
ATR

What is the best way to apply Support Pack Stacks among satellite systems

Hi,
We have differenst systems liek R3, SCM,CRM,XI, BW and EP. We would like to apply teh support pack stack 12.
Which land sacpe need to be applied with the stack first?
R3 or other satellite systems? Is there any recommendation available from SAP on this?
Thanks in advance
Jnaneswar.P

Thanks for your reply Nick101. I see my example was oversimplified. When I say "multiple groups of contacts over multiple users" I'm really referring to N groups of contacts over N users.
So I need to add Fred, who can access and sync Bob's contacts, Sally's contacts, and Common contacts, as well as Fred's contacts. Can I do it with OS X server?
You mention you keep your and your partner's contacts administered locally. What keeps you from administering them through OS X server as well?
I am guessing this can all somehow be accomplished with multiple contact accounts, but I can't find any information on the web explicitly describing this.

What is the best way to apply QoS to CAD

The CAD agent that are working remotely are seeing performance issues. Hence, would it really be better to apply QOS to the CAD workers for better performance or would it just be better to give the remote workers a VMachine and have all the CAD application run locally?

Enterprise
all the teleworkers have business class cable connection with a Cisco 800 router. I know big companies are seeing the same issue latancy that is probably caused by convergence time) maybe from a WAN hiccup. in reference to the VMare -Citrix, was just idea to throw out as a better solution for a more stable enviornment, but the service control messages maybe see a lag over the WAN ...its trading one evil for another...I know CIsco mobile workers are using the CVO solution...(similar to our setup)...thoughts?

The best way to apply Themal Grease

In your opinions, what is the best way to apply thermal grease when using an aftermarket heat sink for CPU cooling?
Is it best to apply the grease to the heat sink (taking a chance of it smearing across the CPU) or apply directly to the CPU in the correct area and then placing the heat sink on the CPU?
I ask because I have never tried an aftermarket heat sink before and don't want to screw things up
Thanks guys for all the help

well the reason ask is because the last time i tried it on the heat sink and stuck the heat sink on the cpu, the grease gooped over to the other parts of the cpu it's not supposed to be on. so i removed the heat sink, cleaned everything up and then applied to the cpu on the die, smoother it out and stuck the heat sink on and clamped it down. when i removed the heat sink, it look all nice and pretty and not sloppy.
didn't know if you guys had any other ideas. of course, i didn't know how much actually needed to be applied. so i'm thinking i might have put too much on in the first place

What's the best way to get a Signature Visa ? apply or CLI ?

I have a 2012 Bank America Cash Rewards Visa Platinum Card that i've successfully removed the $39 annual fee and had it changed to Better Balance Rewards as of last year because i was only earning $50 cash back on my Cash Rewards and figured i could be earning $125 a year having the Better Balance Rewards nstead so i made the switch. Better Balance Rewards usually comes in a Mastercard but they kept it Visa when they changed it from Cash Rewards to BBR. The only thing i did not like was because it was the first credit card it sits at a low $500. When i hand it to the cashier at starbucks (because of their BankAmeriDeals 10% Cash Back using your BankAmerica Card) I am embarrass because it's not ''Signature Visa'' makes me feel and look like i may have ''bad'' credit or just carrying a secured card. When i tried asking if i can be upgrded to a signature visa they said my card does not qualify and need to hard pull my credit report.for a credit limit increas to $5,000. The problem is would i be better off applying for Bank America Signature Visa (preqalified on their site) then i get $100 cash back when i spend $500 in 90 days. Then could they roll over my cash rewards credit line to Better Balance Rewards and close 2015 Cash Rewards ? or would i be better using my ''hard inquiry'' for either US bank cash+ or Chase Sapphire Preferred ? because i know US Bank may be inquiry sensitive and i was planning applying either those 2 in the fall but did not want my inquir from Bank Ameroca get in the way. BTW, my Freedom is signature Visa. Capital One EO would not convert my Capital One Quicksilver Mastercard to Signature visa either. Said i need apply for a Signature Visa and then close the Mastercard which would be stupid since its also one of the longest accounts opened with Bank America. Capital One was $500 but they now allow you combine your cards which was how i got it from $500 to $5,000 without a hard inquiry though unlike Bank America trying to do. So my question is what's the best way getting your cards upgraded to a Signature Visa when its costing you a hard inquiry ? apply it or increase it ? or would you rather use your hard inquiry somewhre else and just not use your non signature visa useless $500 limit card ? What i want ? i want my Bank America $500 limit up with my rest of my portfolio cards and upgraded to signature visa WITHOUT a hard inquiry but they won't do it without a hard inquiry which i wanted to save for adding chase sapphire signature visa and or US bank Cash+ signature visa to my portfolio in the fall so it seems if i want to do this its going to cost me 2 if not 3 hard inquires instead of just 1, i currently have 24 inquiries but 0 in the last 6 months. I been a good boy until next black friday thank you

SebastianZzzzz wrote:
I have a 2012 Bank America Cash Rewards Visa Platinum Card that i've successfully removed the $39 annual fee and had it changed to Better Balance Rewards as of last year because i was only earning $50 cash back on my Cash Rewards and figured i could be earning $125 a year having the Better Balance Rewards nstead so i made the switch. Better Balance Rewards usually comes in a Mastercard but they kept it Visa when they changed it from Cash Rewards to BBR. The only thing i did not like was because it was the first credit card it sits at a low $500. When i hand it to the cashier at starbucks (because of their BankAmeriDeals 10% Cash Back using your BankAmerica Card) I am embarrass because it's not ''Signature Visa'' makes me feel and look like i may have ''bad'' credit or just carrying a secured card. When i tried asking if i can be upgrded to a signature visa they said my card does not qualify and need to hard pull my credit report.for a credit limit increas to $5,000. The problem is would i be better off applying for Bank America Signature Visa (preqalified on their site) then i get $100 cash back when i spend $500 in 90 days. Then could they roll over my cash rewards credit line to Better Balance Rewards and close 2015 Cash Rewards ? or would i be better using my ''hard inquiry'' for either US bank cash+ or Chase Sapphire Preferred ? because i know US Bank may be inquiry sensitive and i was planning applying either those 2 in the fall but did not want my inquir from Bank Ameroca get in the way. BTW, my Freedom is signature Visa. Capital One EO would not convert my Capital One Quicksilver Mastercard to Signature visa either. Said i need apply for a Signature Visa and then close the Mastercard which would be stupid since its also one of the longest accounts opened with Bank America. Capital One was $500 but they now allow you combine your cards which was how i got it from $500 to $5,000 without a hard inquiry though unlike Bank America trying to do. So my question is what's the best way getting your cards upgraded to a Signature Visa when its costing you a hard inquiry ? apply it or increase it ? or would you rather use your hard inquiry somewhre else and just not use your non signature visa useless $500 limit card ? What i want ? i want my Bank America $500 limit up with my rest of my portfolio cards and upgraded to signature visa WITHOUT a hard inquiry but they won't do it without a hard inquiry which i wanted to save for adding chase sapphire signature visa and or US bank Cash+ signature visa to my portfolio in the fall so it seems if i want to do this its going to cost me 2 if not 3 hard inquires instead of just 1, i currently have 24 inquiries but 0 in the last 6 months. I been a good boy until next black friday thank you Good work on removing the annual fee and a successful product change/conversion! I understand your frustration with low limits. AMEX started me off at $1,000 a few years ago and it's slowly grown since then. No need to be ashamed about not having a VISA Signature. Most cashiers aren't looking that closely and most people outside of this forum don't obsess over credit cards. If you're trying to protect your AAoA, then by all means call BOA and ask to talk with a credit analyst (or call the backdoor directy). Request a CLI to your desired amount ($5000 or more). In my experience BOA has been great with CLIs. Good luck! If you're not concerned about your AAoA, then consider which card fits your needs and spending habits: CSP or Cash+. From what I understand, the Cash+ is a difficult card to obtain (often involving manual review). I love my CSP (it's more a travel card), but Chase is stingy with CLIs. I've read here that Chase tends to give bigger limits on second cards. So, since you already have a Freedom Signature, perhaps you'll get a decent CL if you apply for the CSP. Good luck!

What's the best way to load balance multiple protocols on one vserver?

Hi,
We have a CSM blade on a 6513, in bridge mode. I'm just wondering what is the best way to serve HTTP and HTTPS (or any two or more ports) from the same group of servers. As I see it, we have two options:
1. Don't set a port on the vserver, so it is load balancing "any" or "tcp". This is easy but I want to be sure there isn't a downside to this, other than the obvious security issue.
2. Create multiple vservers and point them at the same serverfarm. I tried this and I got some odd results with the health checks.
Any ideas? Thanks a lot.

you listed the only 2 options available.
The advantage of solution #2 is that you can apply specific config for each protocol ie: for HTTP you can turn 'persistent rebalance' if needed.
If you want to use specific probes [not icmp], it is also a good practice to create a different serverfarm for each protocol.
Like this, if the HTTP service goes down but not the server, you can still have other protocols loadbalanced.
Regards,
Gilles.
Thanks for rating this answer.

What is the best way to keep your macbook pro in tip top condition. performance wise

What is the best way to keep the performance of a macbook pro in tip top shape. Over the years my computer seems to act like a pc with all of its hicups and lockups.
I am running mountain lion and this computer is approx 2 years old.
Not sure if there is some sort of software that will help with this or is there something else I can do.
Thanks
GAJ

How to maintain a Mac
1. Make redundant backups, keeping at least one off site at all times. One backup is not enough. Don’t back up your backups; all should be made directly from the original data. Don’t rely completely on any single backup method, such as Time Machine. If you get an indication that a backup has failed, don't ignore it.
2. Keep your software up to date. In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Before installing any Apple update, you must check that all such modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of trouble with system updates.
3. Don't install crapware, such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac" and “MacKeeper” scams, but there are many others.
As a rule, the only software you should install is that which directly enables you to do the things you use a computer for, and doesn't change the way other software works.
Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception to the above rule. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
4. Don't install bad, conflicting, or unnecessary fonts. Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions. Deactivate or remove fonts that you don't really need to speed up application launching.
5. Avoid malware. Malware is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but malware is now increasingly common, and increasingly dangerous.
There is some built-in protection against downloading malware, but you can’t rely on it — the attackers are always at least one day ahead of the defense. You can’t rely on third-party protection either. What you can rely on is common-sense awareness — not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
6. Don't fill up your boot volume. A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a boot failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
7. Relax, don’t do it. Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform. A computing device is not something you should have to think about very much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that is always whining for your attention like a neurotic dog, use a PC.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?

What is the best way to zero a 'custom voltage with excitation' sensor from the front panel?
Thanks for any help

Hi Donavan,
There are two options for zeroing with the NI-9237. You can perform offset nulling and shunt calibration with a strain task, or if you use custom excitation you can use software compensation.
See the Bridge Balancing, Offset Nulling section in the Load, Force, and Torque Measurements tutorial. Take a measurement before the strain is applied and subtract this from all subsequent measurements. See the above tutorial to consider the tradeoff in accuracy between these two options.
Hope this helps,
Jennifer O.
Applications Engineer
National Instruments

What's the best way to copy a big poster and print it out?

I'm doing a big art project (around 5ft by 5ft), where I'm going to draw stuff out by hand, and would like to make a copy of that project by scanning it into the computer, or taking high-res photos of the project and compiling them together in the computer, and then printing the image out at that size, or bigger. So, I will have the original, 5x5ft, and a printed copy.
What's the best way of doing this?
I hear that vector images are ideal for this, so is Illustrator recommended for this?
I know it's a vector graphics program, but is there any way I can take a bitmap image from a scan or photo, and somehow turn it into a vector? If this is not possible, what recommendations would you have?
I have Illustrator CS2.

Take the photo in one shot by a camera with 24MP, e.g.
http://www.kenrockwell.com/nikon/d3x.htm
This should be sufficient for a poster reproduction 5ft square
as a raster image.
For vectorizing one doesn't need high resolution (it's often
recommended to blur the source image).
Perspective and lens corrections can be applied by Photoshop,
but the lighting should be well balanced.
Barrel distortion by wide angle lens is really no problem.
Plenty examples:
All photos here were taken without tripod by a 170 Euro camera.
http://www.fho-emden.de/~hoffmann/andalusien13032010.pdf
Especially see p.20, a photo (with flash) of an exhibition photo,
viewing direction not orthogonal to the object, then perspectively
and lens-distortion corrected.
(The PDF shows the photos heavily downsampled).
Best regards --Gernot Hoffmann

What's the best way to sync video and sound?

If I'm going to make a music video with performance shots (lip-syncing) interspersed with story-line shots, what's the best way to line them up. I mean, I start with some video shot from a car while the song is playing, then transition to a shot of me singing. Say I get the singing clip lined up perfect, then when I add the transition, isn't that going to mess with the timing? And of course, I'll be doing this multiple times throughout the video. Say I get the first one right, then add some more storyline video and another performance clip and I lock that (second) clip to the audio. Isn't that going to shift my first performance clip when I add a transition? Am I making sense?

First look at all your material ..'review' it.
As you say so rightly: "..then when I add the transition, isn't that going to mess with the timing?.." ..yes; but only if you haven't allowed for the length of each transition when you first line up your clips.
So watch your footage, think where you want to cut it, and then immediately think "what kind of transition there, and for how long?" ..Imagine it, in your head, so if you think "that would work best with a quick two-thirds of a second dissolve" jot down that you want to leave an extra two-thirds of a second at the start of the clip which you want to transition into.
In the US of A, at 30 frames per second of NTSC video, two-thirds of a second is 20 frames. (..The frame counter gets up to 0:29 and then changes to 1:00, because the 30th frame changes it over to the next second..)
In Europe the frame rate is 25 per second - so after 0:24 comes 1:00 - so two-thirds of a second is about 0:16.
So when you start to cut your video clips, if you're going to have a two-thirds of a second dissolve between your first two, you'll need to leave an extra 20 (NTSC) or 16 (PAL) frames at the start of your second clip, before the action you want begins onscreen, so that those frames will be "eaten away" in the dissolve between the end of the previous clip and the start of the clip which follows it.
If you definitely want to see the last few frames of "lip-sync" - for some reason - of the first (outgoing) clip, then leave the extra frames on the end of that clip, instead of at the start of the following clip, but it usually works best to ensure that the follow-on clip starts with those extra "sacrificial" frames.
If you want to use any embedded audio that's in the video clips - and you're not simply matching up the video to external sound (..such as an iTunes track or your own material which you're pre-recorded..) then be sure to Extract the audio from your clips as soon as you've cut them, and before you apply any transitions. This keeps their audio safely "marooned" on an audio track, where you can edit it separately, and then match it to the edited video.
So prepare all your video first, and cut it to have excess "tops and tails" which you can eat away during the transitions. (The only transition which doesn't eat away material is iMovie's "Overlap", which freezes the outgoing clip, and dissolves the incoming clip into that freeze-frame. But that - in my opinion -doesn't look to good with music videos, because it freezes the flow of the video, and makes it seem too pointlessly 'jerky'.)

What is the Best Way to Display a ClobDomain Field on a jspx Page?

I have a ClobDomain field in my table that I need to display in my jspx form. What is the best way to go about this? I can't just drag and drop the field from my View and place it onto the form.
Thanks.

Apply a swap image behavior to the image. DO NOT ENABLE THE
AUTOMATIC
RESTORE.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"BillC-Bos" <[email protected]> wrote in
message
news:gp0utj$rmk$[email protected]..
>I have what I imagine is a simple challenge but I after
reviewing the forum
>and
> the DW workspace it seems that the technique I might try
in GoLive are not
> really the best way to go.
>
> I have a small graphic that when clicked should change
to a different
> graphic
> to indivate that the site's visitor already clicked that
graphic (which
> links
> to a detail page). There are many detail pages and the
solution to
> providing
> navigation from one main page drastically limits the
amount of information
> provided on the "master" page making it necessary to
provide some way to
> indicate to the visitor that they already selected that
option - so they
> can
> either avoid that link or return to it if they wish.
>
> So the "master" page will show an image (icon) that will
change once the
> visitor has clicked it. I am not sure how best to make
this happen and can
> use
> some help or guidance. Thanks in advance for you help.
Be well.
>
> Bill C
>

What is the best way to EDIT a voice narration in Premiere Elements 11?

What is the best way to EDIT a voice narration in Premiere Elements 11 when words or paragraphs have to be repeated?

TomVideo4477
The rough description of Preview Window trimming..
a. double click clip in Project Assets to bring up Preview Window
b. move Timeline indicator to beginning of section, hit Set In; move Timeline indictor to end of section, hit Set Out.
c. next you can drag the segment from the Windows to the Timeline audio track and/or drag the segment from the Preview Window to Project Assets to become part of the project's media.
The following should give you some thoughts on the above.
http://www.atr935.blogspot.com/2013/06/pe11-project-assets-organization-for.html
Although more from a video trimming perspective, the principles apply to an audio clip as well.
Now "delete and close gap" can be interesting depending on what is around the area involved.
Please check out the details on that in the following.
http://www.atr935.blogspot.com/2014/02/pe-delete-and-close-gap-failures.html
Not sure I am clear on
The “delete and close gap” option in the edit menu does not work. Do I have to move the file to the Narration Track on the Timeline to do the actual trimming?
You should be able to trim the narration in the Preview Window opened by right clicking the narration clip in Project Assets and then drag the segment to an audio track or narration track or dragging the trim to Project Assets for source media.
Please check out the above and then let me know if you are OK with the information. If not, let me know where I need to clarify what I have written.
Thanks.
ATR

What's the best way to apply a detuned effect to a piano (audio or midi)?

Similar Messages

Maybe you are looking for