What's the best way to configure my account when buying software

I have Creative Cloud single-app membership for After Effects (one-year) but want to buy Premiere Pro software as well. What's the most cost effective way to put the two programs into the one package? Can I buy the two as separate packages and just pay $40? I know I can pay $50 and get access to everything but I really don't need the other software programs.

Two single app can not be clubbed, it shall be better if you get the complete CC, you can check if you are eligible for any promotional offer price.
Membership plans: Pricing and subscriptions | Adobe Creative Cloud
Adobe Creative Cloud / Select a Plan
Regards
Rajshree

Similar Messages

  • What is the "best" way to configure iTunes on an iMac with personal user acounts so each user can access the media library but sync devices on their personal user account?

    I am trying to determine the best way to set up our imac so each user account can access the same media (songs, movies etc.) through itunes and also back up and manage their personal devices under their own personal user account.  There are 4 users on our iMac.  Me, my wife, and our 2 children.  We have built an extensive library of music/media together using the same iTunes store account.  I would like to establish a seperate apple id and iTunes store account for each of us going forward but have the ability for each of us to share our purchases.  What is the best way to configure our system and devices in order to allow shared access to media and at the same time allow for individual management of devices including contacts, apps, photos, etc. Please help, I would like to do this once!
    Thank you in advance! 

    OK, seeing as no-one replied (presumably because a lot of this information is on the forums in bits elsewhere) here's how I've got on so far.
    Applications - just went through them.  About the only one I needed was my media server app.  Just downloaded and re-installed, had a quick look back though my email to find the license key and it all went on fine.  Installation never seemed quite right on my old machine so solved that problem too. 
    Movies - New iMovies just copied across the clips and projects into their respective folders.  Seems to have worked but haven't checked it all that thoroughly.  Some duplicate footage here but I can trim this out at some point when I get a chance to go through here. 
    Documents - Just copied these across. 
    Photos - used an app called iPhoto Library Manager.  You can download for free but have to pay to use the part that consolidates your libraries.  Possibly if I was willing to spend a bit more time I could have got away without using this but given I didn't know the state of my different libraries and just how many duplicates I had this was too much of a convenience to ignore.  Also got my library into a state where I can now spend a few hours organising it a bit better with Faces / Events etc. 
    Not attempted Music or iPhone sync yet as been stuck trying to solve a problem with my power adapter. 

  • What is the best way to configure storage device for rac?

    Hi
    On my disk array i have 7mirors and two conroler, what is the best way to configure environment?
    My application is OLTP, it runs 6-20 o clocj, so i can do backup when nobady work
    Database 10g r2, Windows 2003 enterpise
    for examlep
    First controler
    disks 1-5 DATA
    second cotnroler
    disks 6-7 FLASH
    or meyby share one disk on DATA and FLASH?
    Thanks in advice

    The best is you use ASM (maybe you do it already) and put one failure group on the first disk array and the second failure group on the second array. Then you can ASM let do the work.
    Werner

  • What is the best way to configure password in Cisco IOS?

    I am running IOS 15.2(4) on a 1921 Router
    What is the best way to configure the password for the router?  I have already tried once and managed to lock myself out of another switch.  I would like to use the most secure method which encrypts the password.
    Current Config:
    username admin privilege 15 password 0 cisco123

    Cisco IOS will not let me use a type 5 password.  This is the error message I receive: 
    ERROR: The secret you entered is not a valid encrypted secret.
    To enter an UNENCRYPTED secret, do not specify type 5 encryption.
    When you properly enter an UNENCRYPTED secret, it will be encrypted.
    I tried generating an MD5 hash and inputting that in and that did not work either.  When I do not specify type 5 it will default to using an encrypted type 4 password.
    Also, what is the difference between these two enable secret commands?
    enable secret 5 password
    username admin privilege 15 secret 5 password 

  • What is the best way to reconcile gl account postings with pay results ?

    Hi experts
    what is the best way to reconcile gl account postings with pay results ?
    is it running wage type reporter ?
    or is there any otehr way .. i have variances in wtr n gl posting for a few employees.
    Regards

    Hi,
    Match Payroll Journal (PC00_M40_LJN - Payroll Journal ) with Wage type Report.(PC00_M99_CWTR - Wage Type Reporter )
    Finally verify the Posting amount (PCP0) with Payroll Journal....(PC00_M40_LJN - Payroll Journal )
    This should solve your issue...
    Regards,
    Veeram

  • What is the best way to configure my time capsule if I just want to use it for storage?

    I have a time capsule that I just want to use as backup storage - I don't need it for accessing the internet. What is the best way to set it up? I just tried and it seems to override my normal internet WLAN, which isn't what I want. If I re-insate the existing WLAN, presumably the backup won't happen automatically on the time capsule. Any insights very welcome!!
    Dave

    To work as a backup location the TC has to be part of the existing network.
    The best way to achieve that is to plug the TC into the existing modem router and put it in bridge mode.
    Apple lately have tried to force people to use the TC as the main router.. and the setup via airport utility pushes you in that direction but it is wrong.
    You bridge it and use it as storage.. that is fine.. Simply turn off the wireless if you prefer to use the existing wireless, although for Macs the TC will often work better and you can pick up internet through it at the same time.
    With access by wireless you cannot have two separate networks. If you try to do that, then you will have one connection with internet and no backup.. and another connection for backup with no internet and be forced to swap between the two.. do not do this!!
    You can even setup wireless as roaming.. so same name and security and password as your existing modem router.. and allow the computer to determine which is the best signal to join.

  • What is the best way to keep high res when saving "for web"

    the files i'm saving for web so i can get them in jpg (or gif) format are coming out very pixelated.  this is when i print the image. 
    what is the best way to save for web an image and keep the resolution good. 
    using for a business card template.  avery template will let me attach images i want to the project.  to do this..  i "get file from computer" and it drops the image in but real small... then you are supposed to enlarge it onto your work however you want.  well when i enlarge this image file, it gets pixelated badly.  i'm thinking it's the way i'm saving it.  i do not adjust anything when i save.  maybe i should.  this is where i need guidance. 
    this is what avery template notes about the images i am allowed to use - When uploading the image, the maximum size allowed is 4 MB.  You can only upload JPG and PNG images either as RGB or CMYK.  so when you recommend things, can you please keep this in mind
    thank you for oyur time.

    Aida,
    When you save with the default template using save for web it is generally a very low settings.
    While in the save window you can define the pixel size of the image you want with quality as well as resolution too.
    Refer to tv.adobe.com video save for web or Adobe help file for detailed instructions.
    Mandhir

  • What is the best way to configure my iPods and user accounts?

    I'm looking for a little guidance. Here is my situation:
    I am running the latest version of Tiger. It is currently configured with three accounts; mine is the admin. account and each of my two children have their own accounts.
    My account is the one that is used most of the time. All of our calendars in iCal are maintained here including one for each of the kids. Each of the kids has their own Contacts list in the Address Book as well. I currently have a 5G 30GB iPod Video that I sync with iTunes through this account. Shortly, I will be buying an iPod Touch. I want my 30 GB iPod to be the one that has everything on it; it will be the one we take in the car on trips for music. I want the Touch to have some, but not necessarily all, of my music and all of our calendars and contact information. I am looking to use it to replace my Palm as my PDA.
    My son has a 2G Nano which currently syncs through his account.
    My daughter will be getting a 3G Nano soon.
    I will also be upgrading to Leopard very soon.
    Ultimately, I would like each of the kids to have their own iTunes libraries for music and podcasts and to sync their iCal calendars. As I understand it, however, they cannot access their calendars from their own accounts under my current arrangement. I also understand that there are several ways to configure my Mac to work with multiple iPods.
    Given all of this, what is the best thing for me to do? Should I set up all of the kids' iPods to sync through the admin. account so they can get their calendars at the same time? Or is their some way for them to have access to their calendar information from their own accounts under Tiger (or Leopard)? And as far as my two iPods (the Video and the Touch), should they sync through separate libraries, or through one using playlists. I also want to minimize duplicate data wherever possible, be it music or records in iCal and the Address Book.
    Thanks in advance for any suggestions or advice!

    Anyone...anyone? Bueller...Bueller?

  • What is the best way to configure AE for use as a wireless bridge?

    I am using an AE to provide airtunes to my living room receiver as well as getting internet connection to my living room PC. The way I have it set up is that I am connecting to my existing wireless network (provided by a dlink dir-655) and then plug in the minijack for airtunes and plug in ethernet cable between AE and PC. I don't have a wireless card in the PC so that's why I connect via ethernet cable/AE.
    The problem is that the speed with the AE connected PC when it comes to the web, is quite slow. Many times Youtube just freezes and sometimes never catches back up.
    I've checked speeds with speedtest.net and my speeds fluctuate an extreme amount.
    Is there a way I should configure the AE better to act as a bridge for my ethernet/AE connected PC?
    BTW, I'm only about 25 feet from the dlink wireless router so connection quality should be fine. As both devices support N, I think things should work better!
    any suggestions?
    Thanks

    The newer 802.11n version of the AirPort Express offer an option to configure the base station as a wireless Ethernet bridge. Again, Apple calls this ProxySTA. You configure for a ProxySTA by having the base station join an existing wireless network AND by enabling the "Allow Ethernet Clients" option, located on the Wireless tab within the AirPort Utility.
    My point is that, as a ProxySTA, the Express will NOT extend the wireless range of your D-Link router. Instead, it WILL allow wired clients to connect to its Ethernet port for network/Internet access.
    In the manual setup settings, I see that there is a wireless setting to extend a wireless network and to participate in a WDS network. Would either of these two be better for what I'm trying to accomplish?
    In this scenario, no ... as a WDS would not work because very few non-Apple routers are WDS-compatible. Most likely, your D-Link is not as well ... so your current configuration is the only option for what you are trying to do.
    It seems that this current configuration should be rock solid, but perhaps I'm not using the proper setup.
    The #1 problem with a ProxySTA is that it does not provide the highest level of bandwidth performance. Typically, for the AXn, the best-to-worst performance would be the following configurations: 1) Wired-to-wireless, 2) Wireless-to-wireless (WDS), and 3) Wireless-to-wired (ProxySTA)
    As you can see, the first option would be the best, but it would require that you connect the AXn directly to the D-Link by Ethernet ... which, of course, would tie-up its only Ethernet port so that you could not connect the PC to it as you require.

  • What is the best way to remove all trace of a software?

    I installed a trial version software and now I want to remove it. I did uninstall it but it kept still popup with the message "trial period expired" when I installed the full version in. I want to remove all of trace of the trial version and then I will try install the full version and see if it popup with that message again. I'm talking about the Paragon NTFS for Mac. Any help is much appreciated.
    I do have super duper installed and have a good copy of my OS; however, I do not want to restore since I also have a dual boot with Windows as well. I'm afraid if I use super duper to re-image back, it will erace my other Windows OS.
    Thank you for any suggestions.
    P.S.
    Paragon's support is really bad.

    Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
    Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
    I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
    Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
    You generally have to reboot in order to complete an uninstallation.
    If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
    You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

  • What's the best way to configure my thunderbolt drive with the new mac pro?

    I have an external pegasus drive connected to my mac pro.  Obviously the computer is limited in space and I was wondering whether I should move my "user" folder which will include documents, pictures, videos, etc onto the pegasus.  That way the 256gb hard drive on the mac pro is dedicated solely for the os and and apps.  What do you guys think?

    I concur. See the following:
    How to use an SSD with your HDD
    If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
    After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
    Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu.
    You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed.
    When the computer boots up it will now be using the Home folder located on the HDD.
    Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
    Be sure you retain the fully bootable system on your HDD in case you ever need it.

  • What's the best way to configure multiple email accounts?

    First time poster, just switched over from Blackberry to he iPhone yesterday. I use Mail, iCal, Address Book, iTunes, iWeb, and iPhoto. I have 2 Macs (a Macbook for work and an iMac for home) and an iPhone 3G.
    Here's what I want to do:
    1) I have 4 email boxes - work (pop3), gmail, yahoo, and mac (are gmail and yahoo imap or pop3?). I need them to all be on the iPhone and synched to each mac. It seems logical that if all the accounts and structure are on MobileMe, then it is the driver of messaging, not one of the Macs. (Is anyone else getting like 1-2 minute response time on MobileMe?) Even with pop3, shouldn't email originated from the iPhone be shown on the Macs? Right now, I have no record on my computer that I ever sent that message other than a "message sent" email in my inbox after the iPhone delivers the email.
    2) I have a lot of my mail organized in folders under "On My Mac". I understand from the discussion board that these folders will not synch to MobileMe or the other devices. Question is, where should I move them to make it happen, and what will that look like on the iPhone? Do they have to go in subfolders to each account's inbox? That's a lot of data given the large number of attachments I have and thousands of emails.
    3) Aren't iPhoto and iTunes supposed to be included in the MobileMe functionality? I can't figure out how to make that happen. I got photos and music on the iPhone through a physical synch. That doesn't get them on each of my Macs. Will that even work given each computer has to be specifically authorized to play purchased music?
    Sorry, I know this is a lot of stuff in a single post, and believe it or not, I am not a technology dummy. But I am a busy guy and simply need to get this working. Apple's documentation is very sketchy.

    Two single app can not be clubbed, it shall be better if you get the complete CC, you can check if you are eligible for any promotional offer price.
    Membership plans: Pricing and subscriptions | Adobe Creative Cloud
    Adobe Creative Cloud / Select a Plan
    Regards
    Rajshree

  • What is the best way to fix broken vis when the type library of the active x server changes (methods or properties addes)?

    Every time there is a change to the active X server I am developing drivers for I have to go back through all the vi's I have developed and re-point the methods an properties back to what they were to fix the broken arrows. The only change in the Active X server is usually an additional method or property. There has to be a better way, I have over 130 vi's I have to fix for every update and it keeps getting larger.

    This is somthing I can try, but I don't think it will solve my problem. My reference never changes, it is always the same and is correctly registered with every new release. What does change are the number of methods and properties. With each new release there are usualy additional methods and properties; however, the old ones are still there with the same names (thank goodness). The problem this causes with LabVIEW, apparently, whenever there is a change in the type library you must re-point all the methods an properties again, at least this is what I am experiencing. If doing what you suggested works, it would be some kind of magic that I would like an explanation for.

  • What is the best way to restore my iMac, when I forgot my administrator password?

    I forgot my passwords and the Apple store restored it to factory settings and it was fine.
    Now I did it again. What can I do besides bring it to the Apple store.

    Why not just fix the password?
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • What is the best way to change my account

    When I got my first mac back in 2003 I set my .me account up with my internet service provider. Now, if I move and disconnect from that provider what do I have to do as far as receiving my receipts and emails in iCloud?

    Your icloud account is independent of your provider.  I'm guessing that you used an "non-Apple" email address as the ID for that old account.  Is that right?
    Have you edited the account's info such as contact email address?
    To change your Apple ID go to http://appleid.apple.com and click 'Manage your Apple ID'.   Before you do this turn off location services and Find My iPhone/iPad/Mac on all devices.

Maybe you are looking for