What's the best way to convert a current website into a Fluid Grid Laout?

As the title says....
What's the best way to convert a current website into a Fluid Grid Laout?

See "Using Fluid Grid Layouts (video)"
http://tv.adobe.com/watch/learn-dreamweaver-cs6/using-fluid-grid-layou ts/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/

Similar Messages

What is the best way of converting a Top Level VI into a 'sub vi' - or function ( without duplicating programming)

Hi,
General question here about design architecture, which i keep running into, but haven't found a really good solution. If i write a 'Top Level VI' to do something, what is the best way of converting it into a subVI - which is call-able from other VIs, while still allowing the top level VI to have synchronised feedback/indicator updates.
I guess the point is that when something is a top level VI you write gui logic about what happens when someone clicks buttons or whatever - which you don't want in the 'sub vi' version.
I did at one point try having a hidden boolean button that was an input to the subVI which would let the VI know if it was supposed to be doing the front panel stuff - or simply running as a subVI. This isn't really ideal though - since it would be better to be able to hive off the grizzly useful stuff from the fluffy - front panel updating stuff - having them together makes the VIs rather untidy. More annoyingly though, if you have the front panel version of it running - say waiting for you to hit 'go', it breaks all the other VIs that use it as a sub vi - since they can't compile when a sub vi is already running.
Another possibility that i tried was to basically duplicate the vi so that there was a backend part, and a front end part - and when i click 'go' the backend part is called as a sub vi. The problem with this is that it really limits the interface that the user gets - since none of the controls on the front panel update with the results untill the sub vi is over. I guess again i could solve this by passing references to some of the controls to update them in the subvi - but this doesn't really seem like the ideal situation if the subvi is called by something else without the same types of controls etc.
One final idea i had was to essentially paste all the controls in the VI into a global variable file, and make the sub vi update them, and the front panel VI read from them. This seems to 'work' - although clearly it is a work around rather than a proper solution - since i spend loads of time worrying about how i update cluster variables in the global - reading and writing.
Does anyone have any guidance on what they do to solve this problem?
JP

You could run a subvis in a Subpanel on your top level. Lets you see the current data while the subvi is running.
--Using LV8.2, 8.6, 2009, 2012--

What's the best way to convert from Gmail to iCloud?

I currently use Google's free exchange server and sync my contacts and calendar to Google even though I pretty much do all my emailing from either mac, iphone, or ipad. Since it sounds like it's hard to sync to both google and icloud at the same time, would like to make the switch. Is there a FAQ out there? Can I keep my google email and sync just the contacts w/iCloud or is it an all-or-nothing proposition? If so, is that what others do? Any advice / pointers appreciated. Thanks.

mike needs help wrote:
What's the best way to convert Raw images to jpegs?
GraphicConverter:
http://www.lemkesoft.com/content/188/graphicconverter.html
Not free either, but the best shareware program ever made for the Mac.

What is the best way to convert mini dv tapes to digital

I have a Canon ZR800 that I have created several mini dv tapes with. What is the best way to convert these tapes I made to a digital format? I have a Macbook to use for the digital format.

Hello Jhoslter,
To transfer footage from the ZR800 to your Mac, you will need a firewire (IEEE-1394) cable and a firewire port on your computer. If your computer is not equipped with a firewire port, we would suggest contacting your computer manufacturer for information regarding which firewire card will work best on your system.
As it is only possible to transfer video to a computer via firewire connection with the Canon camcorder, any video capturing program that supports firewire connections should be fine to use to transfer video to your computer. Canon does not manufacture video capturing programs or support a particular brand.
Canon does not require firewire drivers for any of our miniDV camcorders. Our camcorders use the driver for your firewire card to communicate with the computer.
The appearance of the "DV IN" message in the camcorder's LCD screen indicates that the camcorder has detected your firewire port and is waiting for a signal from the video editing software to begin the transfer of footage. The remainder of the transfer process is controlled by that software; we would suggest reviewing the instructions for that program for further information.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Aloha, I have a CD-Rom from 2001 that i very much want to access but cannot because i no longer have "classic." There are a variety of video and text files. What is the best way to convert? Any help is greatly appreciated. mahalo.

Aloha, I have a CD-Rom from 2001 that i very much want to access but cannot because i no longer have "classic." There are a variety of video and text files. What is the best way to convert? Any help is greatly appreciated. mahalo.

Buy a cheap older Mac like an iMac.
 Cheers, Tom

What is the best way to merge a file content into log file

What is the best way to merge a file content into log file.
In worst case, I will read the file line by line as string, then use
logger.info(lineString)to output to log file.
However, is there better way to do this?
The eventual log file will be something like:
log message 1
log message 2
content from file line 1
content from file line 2
content from file line 3
log message 3
log message 4Thanks

John618 wrote:
Thank you and let me explain:
1. What do you mean by better?
I would like to see better performance. read line by line and log each line as string can be slow. Did you measure this and determine that it is actually a problem for your application? Or are you guessing?
Regardless of what you do you are still going to need to read the file.
>
2.The only better way I can think of is not having to do it, but I assume you have a very good reason to want to do this.
Yes, I have to do it beacuse the requirement is to have that file content be part of logging.
Any idea?How is it supposed to be part of it? For example which of the following is better?
        File AAA - contents
                   First Line
                   Second Line XXX
        Log 1
                2009-03-27 DEBUG: Random preceding line
                2009-03-27 DEBUG: First Line
                2009-03-27 DEBUG: Second Line XXX
                2009-03-27 DEBUG: Random following line
        Log 2
                2009-03-27 DEBUG: Random preceding line
                2009-03-27 DEBUG: ----- File: AAA -------------
                First Line
                Second Line XXX
                2009-03-27 DEBUG: Random following lineBoth of the above have some advantages and disadvantages.
The first in a mult-threaded app can end up with intermittent log entries in between lines, so having log lines with thread ids becomes important.
The first can be created by reading one line at a time and posting one at a time.
The second can be created by reading the entire file as a single string and then posting using a single log statement.

Hello-i have an i-mac; on the bookmark bar it has sites like news,google maps,etc. Can i add sites to that bar like craigslist or aol mail? what is the best way to go to frequent websites?

what is the best way to mark a frequent website other than a bookmark?

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico, Spanish is my native tongue. I do not speak English very well, however, I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
If you click the book icon on the left end of the bookmarks bar you can manage all of your bookmarks. Bookmarks can be added individually to the bar (the shorter the name the more room for bookmarks) or you can create folders of bookmarks that can be accessed from the bookmarks bar.
http://operating-systems.wonderhowto.com/how-to/use-safari-bookmarks-bar-326549/

What is the best way of converting everything in a result set into a string

hello folks
What do you think is the best way of converting everything in a resultset into a string???
At the moment I'm using
rs.getString(i);
everywhere (no matter if the underlying datatype is a date or whatever..) it converts automatically evertything expect NULL into a valid string.
Are there better (simple to use..) ways?

I don't see a big switch construct. How about trying the following:
Call this method from your original method by passing the resultset obtained.
public String[] convert(ResultSet rs) {
     int col = ((ResultSetMetaData) rs.getMetaData()).getColumnCount();
     String[] record = new String[col];
     int i=0;
     while(rs.next()) {
          if(rs.wasNull()) record[i] = new String();
          else record[i] = rs.getString(i);
          i++;
     return record;
iDriZ

What's the best way to detect that text fits into ContainerControllers without scrolling?

Hi.
Question
What's the best way to detect that text typed by user (or added programmatically) exceeds available container space and find out where starts truncated part? Is there available some other (than described bellow) easy way to detect it or disallow set of controllers to receive more characters that can be displayed in given composition area?
My partialy failed attempt (simplified)
For example lets say that I've got an editable textflow with attached two instances of ContainerController.
var flow:TextFlow = createSomeFlowFromGivenString(sampleText),
    firstController = new ContainerController(firstSprite, 100, 30),
    lastController = new ContainerController(secondSprite, 600, 30);
flow.interactionManager = new EditManager(new UndoManager());
flow.flowComposer.addController(firstController);
flow.flowComposer.addController(lastController);
flow.flowComposer.updateAllControllers();
With enabled vertical scroll policy I can compare height of the composition in last controller with height of the content:
var bounds:Rectangle = lastController.getContentBounds(),
    overflow:Boolean = lastController.compositionHeight < bounds.height;
trace('Content does not fit into given area?', overflow)
But when I switch vertical scroll policy off (lastController.verticalScrollPolicy = ScrollPolicy.OFF) - unfortunately this no longer works...(In my case scrolling should be dissabled, since text areas might have only one line with restricted width)
Use case
I want to create fillable form. Field might have a single or multiple lines. One field might start in the middle of the page, continue in the next line where it spreads through whole page and end in the - quarter of page width long - third line. Text typed by the user can't exceed given area since it might cover some static text that sits right after/below field.
Something like ascii image bellow:
|                <PAGE>                    |
|                                          |
|                                          |
|                                          |
|               [Field starts here........ |
| ........................................ |
| ........................................ |
| Ends here..]                             |
|                                          |
|                                          |
| [Another field] xxxx xxxx xxxxxxxx x xx |
| xxxxxxxxxxxxxxxxxxx                      |
|                                          |
|                              [One more.. |
| .....]                                   |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
|                                          |
Info:
[......] <-- form fields starts with '[' character, and ends with ']'
xxx       <-- sample, static text
| and _   <-- page borders

I've tried something like that previously, but it didn't work because then I've got vertical scroll policy to set to 'auto'. After changing verticalScrollPolicy to ScrollPolicy.OFF in the last container it worked like a charm.
Thanks zhen bian

What is the best way to plug my iPhone 5 into a mixer for live music performances?

I'm thinking of performing live with my iPhone 5 or maybe an iPad that I haven't bought yet. What is the best way to get the sound for the device to a mixer or PA? I'm wondering if anyone has any experience with wireless options. I'm wondering if it is stable enough for live performance. There doesn't seem to be any audio interface options yet.

there is always the 3.5mm minijack out connector sure it's analogue but a cable with male minijack in 1 and and 2 rca in the other would work with most mixers and or pa's

What is the best way to transfer photos currently in Shutterfly into iPhoto?

Hi!
What is the best way (as far as highest quality and most efficient) to transfer photos currently in Shutterfly into iPhoto? Do I need Shutterfly to make CDs of all of my current photos?
Thanks for any help!!

How to make the best quality Sutterfly copies is a good question for ShutterFly support - eithere download the pohotos or get the CD depending on what ShutterFly support suggests and then import to iPhoto
iPhoto simply takes the quality you provide and makes an exact copy of it
LN

What is the best way to port a entire website?

I need to elevate my test site to the production site... Can anyone tell me if there is an "easy way to just copy the site from one remote ftp to another ftp w/ dreamweaver?
This would include any subdirectories, jquery, images, PHP, etc... at one time. Can I just select the root and have it copy everything underneath over?
What is the best practice for transferring the new site? Bring down the old site and erase from the production server? If I leave the old site live like the client wants I could run into conflicts and then need to go back and delete any remnants of the old site (Which would be a major hassle).
Thanks!

If you have root access (dedicated,VPS, etc) or some way to host multiple sites on the same server I'd upload the new site right along side the old site and then point the domain to the new folder/account. If you don't have that access, first thing I would do is setup a catch-all redirect to push everything at first to a construction page, and then afterwards to the new homepage in case paths have changed with the new site. Something like the following in htaccess will do the trick:
RewriteEngine On
RewriteCond %{REQUEST_URI} !=/index.php
RewriteRule .* /index.php
And I will second what Ken said about a 3rd party FTP client. Personally I use Transmit as an alternative FTP client and would highly recommend them for a stand-alone client.

What is the Best Way to reimport my iPhoto library into Aperture 2?

I used the Aperture 1.5 trial version and imported my iPhoto library (most of it anyway).
I then bought Aperture 2 and I want to reimport my iPhoto library but don't want to screw it up and erase projects and things I've done in Aperture 2.
Also, I don't like or know how to change the Aperture 2 "folders" under Projects that reference my photos. I want to reimport the photos with dates or something to show what they are (wish Aperture had Events on the left like iPhoto).
Can anyone tell me the best way to do this so I don't screw up the photo changes (extensive) and projects that I have made in Aperture? I think I just reimport and make sure I don't import duplicates, etc. but I would like some reassurances.
Also, I have no idea what a vault or a stack is in Aperture.
Thanks for the help!

There isn't a way to reimport the iPhoto library yet have it maintain the changes you made to images in Aperture. Now you can upgrade to 2.1 and Aperture will upgrade your current library keeping your changes intact.
Aperture and iPhoto go about their organization based on different principals. Apple thinks you'll use iPhoto for the snaps from your kids graduation or the family BBQ, hence the events. Aperture, being a professionally oriented program, is based on the idea of projects. That's why they don't have the same structure on the left.
You can get something similar to iPhoto's events in Aperture however, by clicking on "All Projects" under your library.

What's the best way to load FieldPoint measurement data into PI System?

I am finding the best way to load data collected by NI Field Point (FP2220) into the PI system of our power plant.
I found pieces of information about FieldPoint OPC server in NI.com. Not sure if it comes with Field Point Hardware, sold by NI as a separate product or it is actually non-standard NI products. Anyway, I know that there exists a thing called FieldPoint OPC server.
The PI system I mentioned has a OPC client software called PI-OPC interface. It is able to communicate with standard OPC DA server. If that FieldPoint OPC server is a standard OPC DA server provide data collected by Field Point complying to OPC standard, than that's perfect.
Anyone familar with PI system and NI product, please help if the above is going to work or if there is a better way to put Fieldpoint data into PI.

Hi Eric,
This information really helpful, thanks. Regarding to the NI OPC server for NI FieldPoint, I have the other query.
In my setup, there are two sets of FieldPoint located in two different locations on my ethernet network. They are going to be controlled by a single PC. If I am going to connect both my FieldPoint sets with OPC standard, how many NI OPC server for FieldPoint do I need to connect to? Are there two NI OPC servers each serves one FieldPoint set? Or there is only NI OPC server which serves both FieldPoint sets?
I am concerning about the number of NI OPC server instances running, because the number of OPC client license I need to purchase depends on how many OPC server I need to connect to. If one NI OPC server serves both my FieldPoint sets, I only need to buy one OPC client license; otherwise, I need to purchase two. In the future, I am going to have another two sets of FieldPoint sets, so the answer of my query determines how many OPC clients I need to purchase eventually - One or four. A huge price difference.
Looking forward to your reply.
Regards,
Roger

What's the best way to convert between pixels and device-independent units?

WHAT I HAVE:
Visual Basic 2010, .NET 4.0, WinForms
WHAT I NEED:
I need a way to convert back and forth between device-dependent units (i.e., pixels) and
device-independent units (i.e., inches, centimeters, points). The VB6Compatibility namespace has TwipsPerPixel methods, but I figure there's got to be a more elegant way (especially since my program didn't start in VB6).
Robert Gustafson

"Dots-per-inch" means "pixels-per-inch", right? If I'm right, then
XPixels = Graphics.DpiX * XInches : YPixels = Graphics.DpiY * YInches
and, conversely,
XInches = XPixels / Graphics.DpiX : YInches = YPixels / Graphics.DpiY
Is that correct?
(PS. Why not just tell me about the DpiX and DpiY properties, rather than making me click a link?)
Robert Gustafson

What's the best way to convert a current website into a Fluid Grid Laout?

Similar Messages

Maybe you are looking for