What's the best way to setup new iMac i7 coming on Monday?

So here's a question for everyone of the very smart people who monitor this thread. I have a G5 tower with Leopard on it and a Macbook Pro (1 generation ago) with Snow on it. First I was planning on starting up the iMac to see if everything worked well. Then install Nikon Scan to see if my film scanner (Nikon 9000) works with the new machine and Snow and then if all goes well migrate the Macbook to it. Or is it better to migrate from the MBP's time capsule backup. My MBP has all I need on it, more so than my G5 tower which seemed to have fallen by the wayside when I got the laptop. Thanks for all the help I've consistently gotten on here btw.

For the Migration, if the Time Machine backup is recent, then it does not matter if you migrate from the MacBook Pro or from the Time Machine backup.
Your plan to try out the new iMac +as is+ before migrating is a good one. That's how I would proceed. Apply Apple's recent updates using Software Update, but do not migrate data or install third-party software until you are satisfied that the iMac is working 100%. If you run into a problem, it will be much easier to troubleshoot.
Your comment about first installing the Nikon Scan software to make sure it works is also a smart idea. You should install that software, and then other third-party software you need, and check for any issues, before migrating your user data.
From jamesholden post:
however if you do a clean Leopard install, then install your drivers and software, then upgrade to Snow Leopard, they tend to continue working.
That would not be possible on a new iMac, since you cannot install Leopard on it.
If you do the user data transfer using Migration Assistant, I would set it to only migrate Users, not +Applications, Settings, or Other...+ That will transfer your user data, but leave other data alone.

Similar Messages

What is the best way to setup premiere sequence for export when mixing 24fps and 23.976fps for final

What is the best way to setup a premiere sequence for export when mixing 24fps (CG) and 23.976fps (live action) for final output at 23.976 (vimeo and such).
Right now my sequence is at 24fps, and when I export to 23.976, my dialogues seem to shift.
Should I set my sequence at 23.976fps instead of 24fps?
Thanks in advance for the help, and sincere apologies if this is a noob question.
David

That makes it easy. Remove the CGs from the project. Go to Edit>Preferences>Media... and set the Indeterminate Media Timebase to 23.976. Then when you import the image sequence, PP will assign it the correct frame rate.
Edit in a 23.976 sequence.

HT5304 what is the best way to connect my imac wireless with airport express or directly plugged into airport unit

what is the best way to connect my imac to internet via airport express. wireless or ethernet plug to airport? thanks

Hello quinstar,
It sounds like you would like to use either your Personal HotSpot to AirPrint from your MacBook Pro or use an Airport to do so without internet access to the home. According to the following Featured Discussion you very well may be able to use AirPrint with Personal HotSpot:
HT4356 Can I use personal hotspot as wifi to connect printer?
https://discussions.apple.com/thread/4007254
Also, the Airport products to not need an active internet connection to set up a home Wi-Fi connection so that is another option as well.
Thank you for using Apple Support Communities.
Take care,
Sterling

For optimal sound, what is the best way to connect an iMac to a high end stereo system?

If the answer is wired rather than through an Airport Express, what is the best way to wire an iMac to a good stereo? Is there any way to do it other than through the headphones out jack?

Morning Acousticare,
Thanks for using Apple Support Communities.
Thunderbolt cables should not exceed three meters for maximum performance. The Apple Thunderbolt to Thunderbolt cable (2.0 m) is two meters in length.
For more information on this, take a look at this article:
About Thunderbolt to Thunderbolt cable (2.0 m)
http://support.apple.com/kb/HT4614
Hope this helps,
Mario

What's the best way to handle new versions of software?

So we have an Application setup for Adobe Reader (just using Reader as a general example) which is part of our Task Sequence. When Adobe releases a new version of Reader, what's the best way to handle getting the new version into our SCCM setup.
I know I can create a new application and do it all over and select the new file, but can I simply replace the files that the application is pointing to and then somehow tell it to update the DPs with the new files? I'd rather not have to create new
applications every time if I don't have to.
Thanks.

I think continue the way you are doing right now by creating a new application each time there is a version change. Its a clean way to do and this helps with Application life cycle mgmt aswell where you keep track of versions across the environments and
eventually retire an application. Specially where no changes are made without a change control. This is completely process specific and may not be applicable.
i do agree with above posted comments about using supercedence option.
However most of the apps comes with upgrade capabilities from previous versions. So you can upgrade existing version with new one if you do not wish to use supercedence.
Thanks

What is the best way to install new version... adobe always leaves stuff behind from the old version

Hi,
I've gone through the installation of a new version, well... 8 times before. And have noticed that adobe has the nasty habit of not cleanly uninstalling the previous versions...
What is the best way to do this?
Should I do a regular install and trust adobe this time to completely remove the old version and its associated directories?
Or should I uninstall the old version and install the new one? I've always been afraid to go this route bocause of the organizer files.
Thanks for your comments.

So, just to be clear: the "proper, Adobe-recommended" way to go about an upgrade would be to install the new version and THEN remove the older version by means off "Add/Remove programs" ??
Thanks to all for your help.

What's the best way to ship an iMac

Hello,
I'm going to be selling my iMac. I do not have the original box. What is the best way to ship it? Specifically, what kind of box, should I use bubble wrap, etc?

I just went through this and thought I'd add to this thread. An earlier post suggested going to an Apple Store and having them pack it. This did not work for me. When I called my Apple Store (Lenox in Atlanta) they first said that they had just gotten rid of all their boxes but to call back in two days. When I did that, they HUNG UP on me when I asked if they could pack my computer! I called Apple phone support to ask whether the bit posted on the online support community, about Apple Stores packing computers, was wrong. They said it depends on the store. So I called the Atlanta Perimeter location, and they were very helpful. They would have been happy to get a box for me, but my iMac is six months old so the new boxes would not fit my iMac. I ended up going to UPS to have it boxed. It cost about $25. So, if your computer is new (exact same size as new ones), I recommend calling an Apple Store but there is no guarantee they will listen to your question (in Altanta, Perimeter store = very helpful, Lenox store = hangup). If that fails, go to UPS.

What's the best way to setup a media server/central storage for all of my?

I was wondering what the best way to achieve a central media server for all my iTunes content + iPhoto's, calendar syncing and contact sharing is? This is what I currently have:
iMac 20" Aluminum + External HD Backup (kids)
Macbook Black (wife)
Macbook Pro 15" (me)
Airport Extreme 802.11n (obvious)
TimeCapsule 1TB (wifi backup for wife/me)
I would like to replace my PC in my office with a brand new Mac Pro Nehalem 8-Core, 8GB Ram, and 4TB, and replace my PC laptop in my living room attached to my tv, with an Apple TV.
I want to centralize all our Photos from vacations, etc. Music, videos, movies, that are currently split up over wife's macbook, kids imac and my macbook pro onto my soon to be purchased Mac Pro.
I want to be able to stream everything from my living room via Apple TV for when guests come over, dinner parties, etc. (plus I love apple and it keeps things clean)
I'm currently using MobileMe to sync all of our Calendars and Contacts with my main account, which is great, but MobileMe doesn't sync to family members accounts =
What would I need to do to centralize all this onto my future Mac Pro so that everyone has access all the time when they are home and the key here is, modify/update/change from their machines and sync it back/update it on the Mac Pro.
Also, I'm hoping Snow Leopard has some changes to iTunes to make this a little more possible, since we're right around the corner from this release. I don't really want to spend an additional $900+ on Snow Leopard Server to have to achieve these results, but if it makes it easier, and does the job, then I guess I might. This is all speculation though, since it's not out yet. I'd like to get this all sorted and setup within the next month.
I was considering a Drobo, they say they can throw up iTunes Server but, I appreciate everyone for reading this, and taking the time to respond!
Thanks!
Message was edited

I'm in the process of setting up a smaller (and cheaper) but somewhat similar setup to what you want to do, so maybe one example might help point you in the right direction. My needs consist of a centralized location for data storage, which will include iPhoto libraries (I keep two separate ones), iTunes (which I also want served to the home theater system), something other than my laptop to play internet videos and downloaded content on my TV, all with ideally the lowest cost and energy use possible.
My solution was the new Mini with a FW800 external drive as the server/media hub and Airport gigabit as the network hub (it also handles the backup drive).
FW800 is fast enough to saturate a gigabit ethernet link, so I don't consider that much of a bottleneck. The Mini then has iTunes running at all times with its centralized library on it; it is hooked to the home theater via HDMI-DVI video and optical audio, so it can play music and also handle videos when desired; Front Row with the Apple remote is close enough to an AppleTV that I think it handles that well, and it's more full-featured than an AppleTV. It can further be used to display photos/slideshows/whatever on the TV for guests or such, or to surf from the couch with a wireless mouse/keyboard. You can also toss in an EyeTV for $150 and use that as a DVR if you feel like it.
When I want to edit photos or such on my desktop, the gigabit link is fast enough that I can run iPhoto without noticing any significant slowdown. Its also usable over wireless, though I have a dangling extra network cable to plug into a laptop for full gigabit speed if need be. iTunes, of course, shares its library, which can be played from any of the computers in the house if so desired (iPhoto can do that too if you just want to display).
If I REALLY wanted top speed (though I've even done video editing in iMovie via ethernet without issue), I could use a third party synch app (I like Sync) to mirror any of the content from the mini server to a local drive; this works fine with anything but multi-way synching, such as address books being modified in different locations. I'd probably try to set up one of those Mobile Me clone systems or use a 3rd party app if I needed to do that.
Again, maybe this isn't powerful enough or "synched" enough in terms of local storage for your taste, but the advantage is that a Mini uses a minute fraction of the power of a Mac Pro, so you're saving a lot on electricity if the computer will be powered up at all times as a server, and it's also a lot more full-featured as a home theater media hub than an AppleTV. And, heck, the thing is about as well equipped as my old top-of-the-line G5 tower for a 5th the cost and 1/15th the power and noise.

What is the best way to setup iTunes with my current configuration?

I currently have an iPhone 5 and a new iPad. My wife has the iPhone 4S. I do all the syncs (even my wifes) on the same Windows 7 machine. She has a different apple ID than I do and I share one apple ID accross my iPhone and iPad.
I have a Windows Home Server 2011 box that stores all my photos and music files. I am able to connect to the box from the Windows 7 machine without issue. I have several media diretories. One of the directories contains all my iTunes music and another seperate directory contains all my photos.
Here is the question. If I want to sync my iPhone 5 and my new iPad so that I download all the music files and photos how should I setup iTunes? How should I sync my wifes iPhone so she gets all the Photos and music files? One of my chief concern is being able to automatically sync apps and "new" photos taken from either phone back to my file server photo directory.

Migration Assistant is the best way to get everything.

What's the best way to setup multiple iDevices?

I have three iPods (1-3 & 2-4) and 2 iPads2, they are all tied into my own Apple ID and with the new changes/upgrading to iCloud what would be the best way to set these guys up?
I have my own playlist that I like to listen on my iDevices, but some of the songs or even movies are not appropriate for my kids so how would I set it up so not all music/photos/videos are made available on all my devices?
With the library I already have, is it just best to nuke the iDevices and start fresh with iOS5?
Thanks in advance

Hi,
According to your description, my understanding is that you need to create multi websites on the VPS with one static IP address.
Your question is more about IIS instead of DNS server. IIS has provide the function about creating multi websites on one machine. You may post on IIS forum for official support:
http://forums.iis.net/
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

KEA0 what is the best way to create new Operating concern

Hello :
Please advise
1. what is best way to create new OP concern
copy from template or create data structure from scratch?
2. I try to copy from OP concern = IDEA but when click change DATA STRUTURE -I see only CE1xxx but I not see CE2xxxx, CE3xxxx, CE4xxxx ...
pls advise - how to? can I change data structure on CE2, CE3....
Thx in advance.
Manthana

If your data structure will be the same then do a copy. if the data structures are different then create from scratch ( or modify after copy). Copy saves time so you don't have to start from scratch.

What's the best way to connect two imac's with shared internet connection?

Hi
I plan on purchasing a new iMac (likely 2.4 GHz Intel Core Duo - 20 inch, probably will have leopard) and would like to set it up so I can share files and internet connection with my older iMac (1.25 GHz Power PC G4, 768 MB DDR SDRAM, using Tiger Version 10.4.11). I plan on using the Airport Extreme Base Station. I have a exterior cable modem for high speed internet through Shaw (internet provider) and my ethernet connection is through that.
I've heard a few things about this set up, but there are mixed reviews on everything. Would it be better to connect the Airport Base Station to my older iMac and then connect to the internet wirelessly through my new iMac or vice versa? I've heard some of the older iMac's have slow Airport Cards so thinking maybe should use my new iMac for wireless. One computer will be upstairs and the other downstairs.
There must be a few people out there who've done this, so any assistance would be great. Thanks for your help.

Would it be better to connect the Airport Base Station to my older iMac and then connect to the internet wirelessly through my new iMac...
Yes
This would allow the old iMac to use a 100 Mbps Ethernet connection while the new iMac can use a 802.11n wireless connection.
The old iMac only has 802.11g (54 Mbps) wireless capability.

What is the best way to setup network so its FASTEST?

Hello,
I have an old airport plugged into my cable provider box, and use one macbook pro core duo on it, and one new imac on it. But lately i transfer from the internet a lot of big files, and i wan't the fastest network connection for my imac.
Should i connect my imac directly with an UTP connection directly into the airport and let the macbook pro connect on the airport ? Will that be a faster internet connection ?
Or should i get a new airport extreme station ? the gigabit ethernet port that is on the airport extreme, should i connect that to the cable provider ? does that has gigabit ethernet ? or should i put my imac in it there ? how can that be fast if it's the only one connecting on the gigabit ethernet port ?
Thanks a lot for helping me out...

How fast is the connection to your ISP? It is probably 6 Mbps or less.
Therefore (depending on RF issues) any 802.11b, 802.11g, or 802.11n wireless or Ethernet connection is going to be faster than your Internet connection. Therefore getting a faster base station will NOT speed your Internet downloads or Internet access.
Or should i get a new airport extreme station ? the gigabit ethernet port that is on the airport extreme, should i connect that to the cable provider ? does that has gigabit ethernet ?
Cable modems used to have only a 10 Mbps Ethernet port. I believe many of the newer ones have a 10/100 Mbps Ethernet port. This is usually provided to achieve compatibility with user equipment. It is generally not needed because of the connection speed to the ISP.

What is the best way to cleanup my iMac 10.7.5?

I have tons of space - this is not the issue. My computer has slowed down significantly and I thought a cleanup may help. Also, I renetly recieved an e-mail from someone I know and it was sent by a third party who hacked this friends e-mail. In addition, I downloaded MacKeeper and found out afterwaords that this is spam. I think I got ridof the application but they are spamming my e-mail on the hour! I admit to being not very tech savvy but have not had a problem for a number of years. I was hoping there was a way of cleaning up the drive and getting back to normal? Kohou

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.[bw]/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,[lps]*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

What is the best way to upgrade my iMac (2.66GHz, early '08) for Photoshop?

I'd be grateful for some advice on the most cost-efficient way to upgrade my iMac. I had thought of replacing it this year but am hoping to stave off that decision for a while. My reason for upgrading is that I use photoshop a lot, with big files (some up to 1Gb), many layers, panorama stitching etc. My options seem to be:
- Upgrade to new iMac. I appreciate there are several advantages to this. Faster processor, faster graphics card, support for more RAM, possibility of fusion drive etc. The question is whether there are some low-cost steps I can take instead that will make a big difference.
- Upgrade RAM. This is probably a no-brainer. I only just found out that my iMac (Model 8.1, early '08, 2.66GHz) can actually take 6Gb not the 4Gb that Apple says is the maximum.
- Replace/add hard drive. I had been thinking of replacing the tiny 320Gb HDD (using iFixIt guide). However, I noticed that my external HDD on FW800 (WD) seems to run faster than the internal one, which surprised me (tested using BlackMagic - read/write speeds approx 55 on internal, 70 on external). So maybe I just need to upgrade the external drive (new HDD in same enclosure?).
- SDD. I like the idea of a small-ish SDD, on which I would put my start-up partititon, photo apps (photoshop, lightroom, photomatix etc) and probably the current project. Photoshop would be pointed towards it for the scratch file. I think even a 120Gb SDD would work well and speed things up a lot. I would probably aim to use iFixIt's enclosure for the SDD that replaces the optical drive.
So... if I replaced the RAM ($80), increased the external HDD to 3Tb ($150), and inserted a 120Gb SDD ($120), that would cost $350 and would give me the extra memory, the speed of SDD for start-up and all photo files, as well as a good size storage increase in the HDD. This compares to probably $2000 for the iMac I would purchase with RAM upgrade.
Will this give me a *big* improvement or am I mostly limited by the processor speed (can I overclock?) and video card?
Very grateful for any thoughts.

Hello,
RAM is the first...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=298&type=Memory
HDD, or especially an SSD would speed up things...
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=298&type=Internal+Dr ive
Personally, I boot my iMac from FW for reliability.
You wouldn't want to overclock anything, unless you add a bunch of extra cooling.

What's the best way to setup new iMac i7 coming on Monday?

Similar Messages

Maybe you are looking for