What's the better order to install OEM + AS + DB

Hi everbody.
What's the better order to install on RHEL4 Update2:
- Enterprise Manager Control Grid (10gR2)
- Database (10gR2)
- Application Server (10gR3)
And about the $ORACLE_HOME?? How to? Each instalation have a separate $ORACLE_HOME??
Tks!

Rafael,
Save the Grid Control as the last installation. The order of Database and Application Server doesn't matter, however I would personally install the database first.
Please read all Installation Guides' before starting any installations, and follow all pre-requisites stated for RHEL4.
The Installation Guide's states that all products must be installed in separate ORACLE_HOME. As a matter of fact, the Oracle Installer doesn't allow installing any of these products into an existing ORACLE_HOME.
Regards,
Martin

Similar Messages

What's the correct order to install OEM Grid Control + DB + AS?

Hi everbody! I'm getting start on OracleAS and Grid Control.
What's the correct order to install:
* Enterprise Manager 10g Grid Control
* Database 10gR2
* Application Server 10gR3
(on RHEL4-Upd2)
or the order is not important?
I need have the environment for each oracle software ($ORACLE_HOME, $ORACLE_BASE)? Or install first one, and change the environment and install, change again and install, etc.. ? :)
Tks!

Hey Rafael! You only have to use the Grid Control CDS, AS, repository database and grid control software are installed automatically, so you dont have to worry about the order u should have to follow.
Anyways if u have already installed a database u can use that one as a repository.
about the enviorment variables i guess u´ll be prompted for just one only directory cause u only need to install the software only one time.
hope u find this interesting!!
Regards, Luis

I have a desktop Mac OS X Leopard. I want to upgrade to Quicken 2007, Install Snow Leopard and download iLife '11. I heard that Quicken and Snow Leopard can clash and have problems. What would be the best order for installing these products. Thank You.

I have a desktop MAC OSX Leopard. I want to upgrade to Quicken 2007, install Snow Leopard, download iLife'11. I heard that Quicken and Snow Leopard can clash..........that is why I am upgrading Quicken. What would be the best order of installing these products. I have gotten defferent opinions and I want to be sure I install them correctly.
Thank You.

First, install OS X, then install your third-party software.
How to Install OS X Updates Successfully
A. Repair the Hard Drive and Permissions:
Boot from your current OS X Installer disc. After the installer loads select your language and click on the Continue button. Then select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
B. Make a Bootable Backup Using Restore Option of Disk Utility:
1. Open Disk Utility from the Utilities folder.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal
startup drive.
C. Important: Please read before installing:
1. If you have a FireWire hard drive connected, disconnect it before installing the
      update unless you will boot from this drive and install the update on it.
      Reconnect it and turn it back on after installation is complete and you've
      restarted.
2. You may experience unexpected results if you have installed third-party system
       software modifications, or if you have modified the operating system through
       other means. (This does not apply to normal application software installation.)
3. The installation process should not be interrupted. If a power outage or other
      interruption occurs during installation, use the standalone installer (see below)
      from Apple Downloads to update. While the installation is in progress do not use
      the computer.
D. To upgrade:
Purchase the Snow Leopard Retail DVD.
Boot From The OS X Installer Disc:
      1. Insert OS X Installer Disc into the optical drive.
      2. Restart the computer.
      3. Immediately after the chime press and hold down the "C" key.
      4. Release the key when the spinning gear below the dark gray Apple
          logo appears.
      5. Wait for installer to finish loading.
      6. Follow instructions.
After installing Snow Leopard you should update it by downloading and installing Mac OS X 10.6.8 Update Combo v1.1.

What is the better way to change name of a site with paths and links?

Hi!
i m using dreamweaver cs4 and i have a site already configured on dreamweaver
i need to change the name of the site and at the same time, every path names and every links
This site has about 50 pages so i would like to know what is the better steps to do for modified the name of the site unless problem?
I read the informations about 'manage site' but its not clear for me about links and path names!!
thank you

Just use site manager to change the site name. Nothing complicated with that.
What exactly do you mean by changing path names? Do you want to change the name of folders in the site? If so, just change them within DW and it will prompt if you want to update links.

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

HT1364 I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

I just bought a new PC and now have ample space on my C drive to house my music Library which is currenlty installed on a external drive. What is the best way to install and move the itunes library to my C Drive?

If the entire library is on the external drive then simply copy the iTunes folder into <User's Music> on the new computer, then install iTunes. If you've already installed iTunes you will want to remove the empty iTunes folder in <User's Music> first.
If it turns out you only have the media folder on the external drive then take a look at this post...
tt2

What are the better load/performance testing tools available for Flex Application with BlazeDS RO?

In my application is designed with Flex3, ActionScript3, BlazeDS Remote Objects.
Just i tried with OPENSTA but i cant do the dynamic parameterization in their generated scripts because the response of the calls is binary values and also we cant get the response using with SCL language.
While testing with OPENSTA with HttpService, i can do the dynamic parameterization and got the response.
can give the information about the below questions
whether we can do dynamic parameterization with OPENSTA for Flex Remote objects?
and what are the better load/performance tools available for Flex Remote Objects?

Your approach is fine, depending on how many and what type of CFCs you are talking about. If they are "singletons" - that is, only one instance of each CFC is needed to be in memory and can be reused/shared from multiple parts of your application - caching them in the application scope is common. Just make sure they are thread safe ("var" or local.* all your method variables).
You might consider taking advantage of a dependency injection framework, such as DI/1 (part of the FW/1 MVC framework), ColdSpring, or WireBox (a module of the ColdBox platform that can be used independently). They have mechanisms for handling and caching singletons. Then you wouldn't have to go to the application scope to get your CFC instances.
-Carl V.

How to map journal fields and whats is the better process type

/Journal/JournalSuspenseCostCentre     NULL
/Journal/JournalBalancingCentre     Lookup from Organisation ID
/Journal/JournalMultiCompany     u2018Nu2019
/Journal/JournalBatchNumber     NULL
/Journal/JournalNumTransactions     Total number of /Journal/JournalLine transactions
/Journal/JournalBaseDRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Debit Values only
/Journal/JournalBaseCRTotal     Sum of /Journal/JournalLine/JournalLineBaseValue u2013 Credit Values only
How to map journal fields and whats is the better process type idoc/proxies?please let me know
Journal Line
Multiple journal lines per header:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount
/Journal/JournalLine/JournalLineVolume     NULL
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineChequeBookReference     NULL
/Journal/JournalLine/JournalLineMatchField     Cheque Number
NB Contra accounting entries should be posted to:
Schema Element     Data
/Journal/JournalLine/JournalLineCostCentre     Bank account control Cost Centre
/Journal/JournalLine/JournalLineAccount     Bank account control Account Code
/Journal/JournalLine/JournalLineMoneyTotal     Transaction Line Amount * -1
/Journal/JournalLine/JournalLineDescription     Payee Name
/Journal/JournalLine/JournalLineMatchField     Cheque Number
/Journal/JournalPeriod     Current General Ledger Period
/Journal/JournalYear     Current General Ledger Year

It looks you are new to PI,
you have to develop scenario end to end, by creating source data type and target data type(if you have XSD's not required),then use Graphical mapping (message mapping) to map source and target structures.
Search in sdn for one end to end scenario you will understand easily
Regards,
Raj

What are the correct steps for installing Oracle Entitlement Server SSM?

Can somebody explain what are the correct steps to install OES SSM 10.1.4.3? I have installed OES admin 10.1.4.3 and applied the CP2 patch. it is allowing me to open Entitlement Administration, where I can define the policy.
Is it sufficient to have this Entitlement Admin to call the policy from BPM? Do I need a SSM ?
When I try to configure Java SSM using ConfigTool.bat -process myssm_config.properties I am getting the following error
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

Yes I have explored this pdf...but it doesn't tell how to use the policy from the BPM. My question is if I want to use the policies from BPM, then do I need to install the SSM ?
If yes, what are the correct steps of installation ?
I am getting the errors while configuring the Java SSM.
Is Admin in the same BEA-HOME as SSM: [default: Yes]:
Give the location of the Admin: c:\bea\ales32-admin
Enter the identity directory name which will be used: [default: CoESSM_dir]:
Enter the root node which will be used to create resources: [default: //app/policy/CoESSM_app]:
Checking if default ARME port is free: 8000
Generating policy files based on templates ...
Checking if SSM instance already present
Checking to see if SSM ARME port is free.
Checking JDBC parameters...
Checking to see if asipassword was run...
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.AlesConfig - You need to run asipassword first
2010-03-15 18:06:59,295 [Main Thread] ERROR com.bea.security.SsmConfigTool.ConfigurationTool - Error making changes: You need to run asipassword first
I have tried running the asipassword utility, but still it gives the same error. Please let me know what am I doing wrong?

What's the better approach?

Hi, I was just making a program that access a DB through JDBC, and I got myself into this dilemma
What's the better approach to make a connection to a DB?
approach #1(use of singleton pattern)
import java.sql.*;
public class DBConnection {
    private ResultSet rs;
    private Connection conn;
    private PreparedStatement ps;
    private static boolean singleton = false;
    private DBConnection() throws Exception{
        Class.forName("driverPath").newInstance();
     conn = DriverManager.getConnection("url", "user", "pass");
     singleton = true;
    public static DBConnection getInstance() throws Exception{
        if(singleton)
         return null;
        return new DBConnection();
    protected void finalize() throws Throwable {
        //close the connection and release resources...
        singleton = false;
    //Methods to make DB querys and stuff.
}approach #2 (make a connection only when doing querys)
public class DBConnection {
    private ResultSet rs;
    private Connection conn;
    private PreparedStatement ps;
    public DBConnection() throws Exception {
        Class.forName("driverPath").newInstance();
    //Just some random method to access the DB
    public ArrayList<Row> selectAllFromTable() {
        ArrayList<Row> returnValue = new ArrayList<Row>();
     try {
         conn = DriverManager.getConnection("url", "user", "pass");
         //make querys and fill the arraylist with rows from the table
     } catch(Exception ex) {
         returnValue = null;
         ex.printStackTrace();
     } finally {
         if(ps != null)
             ps.close();
            if(rs != null)
          rs.close();
         if(conn != null)
          conn.close();
     return returnValue;
}I know this classes maybe don't even compile and I don't handle the Exceptions, I'm just trying to make a point about how to manage the connection
So, what it's the better approach in your opinions? #1? #2? neither?

Hi,
I'm resurrecting this thread to ask is this approach OK?
I'm trying to make a single MySql JDBC connection accessible throughout the model.
I'm planning to use it in a Swing application. Whilst I realise the Swing apps are inherently multi-threaded, everything I plan to do can (I think) be done within the constraint that all access to model happens on the EDT, and the user will just have to wear any unresponsiveness.
package datatable.utils;
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
abstract public class MySqlConnection {
     public static final String URL = "jdbc:mysql://localhost/test";
     public static final String USERNAME = "keith";//case sensitive
     private static final String PASSWORD = "chewie00";//case sensitive
     private static final Connection theConnection;
     static {
          String driverClassName = "com.mysql.jdbc.Driver";
          try {
               Class.forName(driverClassName);
               theConnection = DriverManager.getConnection(URL, USERNAME, PASSWORD);
          } catch (Exception e) {
               throw new DAOException("Failed to register JDBC driver class \""+driverClassName+"\"", e);
     public static Connection get() {
          return(theConnection);
}Is there a better solution short of c3po? Which I played with, but couldn't work out how to configure.
Thanx guys (and uj),
keith.

What is the best approach to install BI statistics in SAP BI ?

Hello All,
what is the best approach to install BI statistics in SAP BI ?
by collecting objects in standard BI content- 0TCT*objects or
by executing some standard tcodes.
Regards,
Siva

the best approach is based on version of your BW system follow up install steps in notes:
BW 3.x:
309955 - BW statistics - Questions, answers and errors
BW 7.x
934848 - Collective note: (FAQ) BI Administration CockpitBW 7.x
Cheers,
m./

Do somebody knows what´s the recommended heigh to install an access point 1242 with external antennas 1728 on a flat area?

Do somebody knows what´s the recommended heigh to install an access point 1242 with external antennas 1728 on a flat area?And for example, if i use aps 3602 the heigh to install is the same?? BEST REGARDS

To determine the required height of an antenna tower over a hypothetically flat, spherical Earth, it's necessary to calculate the effect of the Earth's curvature, and then add a distance equal to 60% of the radius of the First Fresnel Zone. The table below shows the result of these calculations. Values have been rounded up to the nearest foot.
Line of Sight Distance Between Antenna Towers
Height of Tower to Avoid Flat Earth Curvature
Tower Height Required Over Tallest Obstacle In Line-of-Sight to Provide
60% Fresnel Zone Clearance
2.4GHz 802.11b/g
5.8 GHz 802.11a
8 Miles
10 feet
33
25
10 Miles
15 feet
38
30
12 Miles
20 feet
43
35
14 Miles
25 feet
48
40
16 Miles
30 feet
53
45
18 Miles
40 feet
63
55
20 Miles
50 feet
73
65
22 Miles
60 feet
83
75
24 Miles
70 feet
93
85
26 Miles
80 feet
103
95
28 Miles
100 feet
123
115
32 Miles
125 feet
148
140
34 Miles
150 feet
173
165
40 Miles
200 feet
223
215
It can be seen in the table above that a wireless link between two points separated by 26 miles would require an antenna tower with a minimum height of 103 feet for an 802.11b/g radio and 95 feet for an 802.11a radio. In practice the heights would typically be 20 feet higher, or more. This is because the Earth is not smooth and flat and the tower height must be raised to compensate for buildings, trees, hills, or other obstacles. For example, in a suburban setting, with houses and small offices, it may be necessary to add 20 to 40 feet to the tower height to get over the homes, offices, and trees that would be in the line-of-sight between the two towers.

What is this Hour Glass Model and what is the best order of dimensions

What is this Hour Glass Model and what is the best order of dimensions in Essbase cube (Block storage model)

Dimension order has a huge impact on performance.. The worst case I ever saw was in a pre-sales situation where an outline was thrown together very quickly by someone not experienced with Essbase. A rather small retrieval took 3 minutes despite the fact that there was absolutely no data in the database! Rearranging the dimensions made retrievals instantaneous..
Tim Tow
Applied OLAP, Inc

What is the best way to install Lion?

i already downloaded Lion but need to know that what is the best way to install lion?

myimagination's Mac OS Lion FAQ.
https://discussions.apple.com/message/15733040#15733040
Topics covered in the FAQ.
0. Cautions / Before Upgrading.
1. Apple UpToDate Program.
2. How many Macs?
3. Re-downloading from App Store?
4. Reinstalling Lion. (clean install)
5. Making a Lion DVD.
6. Java
(will be updated)

What is the best way to install an Airport to a G5?

Hi. My G5 came without a built in Airport card. I've recently bought an Airport Extreme. What is the best way to install an Airport to a G5? Should I buy the Airport card from ebay or some other retailer & do the installation myself OR should I buy it & get somebody professional to install it?

Hello ajdoyle78. Welcome to the Apple Discussions!
The April 2005 and earlier Power Mac G5s are compatible with the AirPort Extreme card. The later Power Mac G5s (models: M9590LL/A, M9591LL/A, M9592LL/A) are not. Instead, these models require a special combo AirPort/Bluetooth card which must be installed by an Apple Authorized Service Provider (AASP).

What's the better order to install OEM + AS + DB

Similar Messages

Maybe you are looking for