What's the capacity of the different models?

Nowhere did I find the capacity of the 8Go, 32Go & 64Go.
How many songs, movie etc.
Also, are they all the same speed?

All the 4G iPods have the same procesor and memory. After the 2G iPods, Apple stopped giving the song capacities. Could be it is very dependent upon the song length and compression. The following is from the specs for the 2G iPod:
8GB, 16GB, or 32GB flash drive2
Holds up to 1,750, 3,500, or 7,000 songs in 128-Kbps AAC format3
Holds up to 10,000, 20,000, or 25,000 iPod-viewable photos4
Holds up to 10 hours, 20 hours, or 40 hours of video5

Similar Messages

What are the different model numbers for the glossy screen and the matte?

I just bought a 2.5 MBP from bestbuy and before I open it up I want to make sure I didn't get the glossy screen. Is there a way to tell from the box? It doesn't say glossy screen on it but I wasn't sure.
I am just switching over from having to use a PC for 15 years back to where I started using macs. What are the benefits of the glossy screen?

You may want to check out your local Apple store where both the glossy and matte screens are on display.
Glossy screens provide more vivid, vibrant colors and deeper, richer blacks. They're great for watching movies, viewing photos, etc.
Matte screens are good for use in high-sunlight environments or in situations where you have a lot of light shining on your screen. Many professional photographers opt for these screens because they more accurately reflect how a photo will look when printed. (Don't be confused -- photos look better on the glossy screen, but when you print them they'll look less vivid. Photographers don't like that because it makes it tough to anticipate how a photo will look when printed.)
Here's my two cents: I've spent 20 years on a matte screen. I used the glossy one for a day and you couldn't pay me to switch back. In my opinion, the glossy screen is fantastic.

What are the different iPhone 5 model numbers?

What do the different model numbers mean for the iPhone 5? I see some that start with an "A" and some that start with "MD"? Which model is for what?

All iPhone 5 have both an A Model number and a MD Model number. The MD Model number is found in Settings App > General > About > Model.
Here are some examples:
Model A1428 is the iPhone 5 primarily used by GMS networks in USA, Canada, supports LTE bands 4 (AWS) and 17 (700b MHz).
Model A1429 (CDMA model) Sprint and Verizon, Japan under KDDI, supports LTE bands 1 (2100 MHz), 3 (1800 MHz), 5 (850 MHz), 13 (700c MHz), and 25 (1900 MHz).
Model A1429 (GSM model) most GSM carriers overseas, supports LTE bands 1 (2100 MHz), 3 (1800 MHz), and 5 (850 MHz)
Apple iPhone 5 16GB White AT&T MD635LL/A
Apple iPhone 5 16GB Black AT&T MD634LL/A
Apple iPhone 5 32GB White AT&T MD637LL/A
Apple iPhone 5 32GB Black AT&T MD636LL/A
Apple iPhone 5 64GB White AT&T MD645LL/A
Apple iPhone 5 64GB Black AT&T MD644LL/A
Apple iPhone 5 16GB White Verizon MD655LL/A
Apple iPhone 5 16GB Black Verizon MD654LL/A
Apple iPhone 5 32GB White Verizon MD659LL/A
Apple iPhone 5 32GB Black Verizon MD658LL/A
Apple iPhone 5 64GB White Verizon MD665LL/A
Apple iPhone 5 64GB Black Verizon MD664LL/A
Apple iPhone 5 16GB White Sprint MD657LL/A
Apple iPhone 5 16GB Black Sprint MD656LL/A
Apple iPhone 5 32GB White Sprint MD661LL/A
Apple iPhone 5 32GB Black Sprint MD660LL/A
Apple iPhone 5 64GB White Sprint MD668LL/A
Apple iPhone 5 64GB Black Sprint MD667LL/A
Apple iPhone 5 16GB White GSM Officially Unlocked MD294LL/A
Apple iPhone 5 16GB Black GSM Officially Unlocked MD293LL/A
Apple iPhone 5 32GB White GSM Officially Unlocked MD296LL/A
Apple iPhone 5 32GB Black GSM Officially Unlocked MD295LL/A
Apple iPhone 5 64GB White GSM Officially Unlocked MD643LL/A
Apple iPhone 5 64GB Black GSM Officially Unlocked MD642LL/A
CANADA
iPhone 5 16GB Black & Slate (GSM) Unlocked MD293C/A
iPhone 5 32GB Black & Slate (GSM) Unlocked MD295C/A
iPhone 5 64GB Black & Slate (GSM) Unlocked MD642C/A
iPhone 5 16GB White & Silver (GSM) Unlocked MD294C/A
iPhone 5 32GB White & Silver (GSM) Unlocked MD296C/A
iPhone 5 64GB White & Silver (GSM) Unlocked MD643C/A
ITALY iPhone 5 16GB Nero e ardesia (GSM) Senza scheda MD297IP/A
ITALY iPhone 5 32GB Nero e ardesia (GSM) Senza scheda MD299IP/A
ITALY iPhone 5 64GB Nero e ardesia (GSM) Senza scheda MD662IP/A
ITALY iPhone 5 16GB Bianco e argento (GSM) Senza scheda MD298IP/A
ITALY iPhone 5 32GB Bianco e argento (GSM) Senza scheda MD300IP/A
ITALY iPhone 5 64GB Bianco e argento (GSM) Senza scheda MD663IP/A
New Zealand iPhone 5 16GB Black & Slate (GSM) Unlocked MD297X/A
New Zealand iPhone 5 32GB Black & Slate (GSM) Unlocked MD299X/A
New Zealand iPhone 5 64GB Black & Slate (GSM) Unlocked MD662X/A
New Zealand iPhone 5 16GB White & Silver (GSM) Unlocked MD298X/A
New Zealand iPhone 5 32GB White & Silver (GSM) Unlocked MD300X/A
New Zealand iPhone 5 64GB White & Silver (GSM) Unlocked MD663X/A
Maybe this will be helpful, good luck.

What are the different Sony Xperia Z1 sol23 and Z1 C6906

What are the different Sony Xperia Z1 sol23 and Z1 C69061) sol23 model is working 4G for Asia 4G network2) What are the different sol23 and c6309

See wiki:
https://en.wikipedia.org/wiki/Sony_Xperia_Z1

I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

Please help! I have a Apple MacBook Pro "Core i7" 2.8 13" Late 2011. i want to upgrade its RAM from 4GB to 16GB. But OWC sells two kinds of RAM, the DDR3 and the DDR3L.What is the different and which one would work better for my mac. Thanks!!!

I don't see any DDR3L on the page for the RAM that would fit your model -> http://eshop.macsales.com/shop/memory/Apple_MacBook_MacBook_Pro/Upgrade/DDR3_133 3MHz_SDRAM.
But the answer is that it doesn't really matter - just make certain to get 1333MHz.
Good luck,
Clinton
MacBook Pro (15-inch Late 2011), OS X 10.??, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

What is the different w

What is the different between the creative mp3 sli'ver and all the different colors.

IT's all about Speed. The yellow ones are kinda slow. The red ones are slowest and the green ones go faster. The silver and black are special turbo editions. They are the fastest. The pink ones are the safety version so you don't get hurt.
Actually it's just about choices. Creative is just giving you a choice of colors for some of the models they offer. Most others offer color. Creative lets you express your creativity through color.

Re: What is the different between the NB550D-109 and the NB550D-10G?

Hello Guys . I need some help about the NB550D. What is the different between the NB550D-109 and the NB550D-10G?? Is just the colour?

I've checked local and internet shops - strange thing - now, a month after they've started to sell NB550D, in my country (Poland) you can buy only 10J model (with C30) - only green! But the price changed from 1299 to 1199 :)
And 10G model (blue with C50) disappeared - sold out!!!???

What is the different between Sharepoint fast search service and Sql server fulltext search?

HI ,
I want to kow what is the different between Sharepoint fast search service and Sql server fulltext search?
Or Can I abstract the Sharepoint fast search from the Sharepoint platform as a isolate component?
Thank you.
James

They are very, very different beasts.
Firstly FAST Search for SharePoint is the old name for the product and is only relevant for SharePoint 2010 not 2013. It got merged into the standard SharePoint search for the 2013 release.
SharePoint search is aimed at providing a Bing or Google like experience for your intranet content, as well as providing some nifty features that are purely SharePoint releated along the way. That means it can crawl SharePoint content, file shares,
outlook mailboxes, internal and external websites and probably fifty other different things if you really tried. Whilst i'm not an expert on SQL full text search I believe it's intended to provide a search feature for content held within SQL databases
and tables.
Can you run SharePoint purely for Search? Yes, definitely.

What is the best model laptop that 9.2.2 can start up on?

I'm looking to buy an old laptop that starts up Classic 9.2.2 like the iMac G3 does and can also run a version of OS X (at least 10.3.9). Would those be Powerbooks or iBooks or both? What is the fastest model I should look for?

Click here. All of the iBooks which fit those criteria are G3s.
(62248)

What are the different ports required to Deploy(Run) an application in NWDS

Hi all,
We have a issue here in deploying our application in NWDS. As we are accessing our servers(from another country) thru firewalls in between, most of the ports are blocked for security reasons,henceforth, we are unable to deploy our application in NWDS.
Initially port 3601 was blocked, now its open.when i try to deploy my application , it prompts for a SDM password, after i enter it , it gives me error saying it can't process thru 50018 port.
So my query is , to build,deploy and run or debug a application in NWDS what are the different ports that needs to be accessable ?( so that i can tell my basis guys that all this specific ports need to be opened )
(Note: will the SDM port, debug port,Http port be enough to deploy and run an application)
Need your help on this
Regards,
Vijay

Hi Arun,
Thanks for your reply, as you told port 3601, its already opened. I didnt understand about the 3200,3300,3299. Can u be more clear about why each of this port is used for? ( bcoz i need to give a reason to my Basis guys,what each port is for)
Hope this Log details of the error that I get here helps you:-
<i>Settings
SDM host : "ServerName"
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/abap1/LOCALS1/Temp/temp22390Welcome.ear
Deployment exception : Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"
Inner exception was :
Server "srvName" did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to server "srvName" at port 50018: "srvName"</i>
appreciate your valuable inputs.

What are the different types of analytic techniques possible in SAP HANA with the examples?

Hello Gurus,
Please provide the information on what are the different types of Analytic techniques possible in SAP HANA with examples.
I would want to know in category of Predictive analysis ,Advance statistical analysis ,segmentation analysis ,data reduction techniques and forecast techniques
Which Analytic techniques are possible in SAP HANA?
Thanks and Regards
Sushma C Narasimhamurthy

Hi Sushma,
You can download the user guide here:
http://www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CFcQFjAB&url=http%3A%2F%2Fhelp.sap.com%2Fbusinessobject%2Fproduct_guides%2FSBOpa10%2Fen%2Fpa_user_en.pdf&ei=NMgHUOOtIcSziQfqupyeBA&usg=AFQjCNG10eovyZvNOJneT-l6J7fk0KMQ1Q&sig2=l56CSxtyr_heE1WlhfTdZQ
It has a list of the algorithms, which are pretty disappointing, I must say. No Random Forests? No ensembling methods? Given that it's using R algorithms, I must say this is a missed opportunity to beat products like SPSS and SAS at their own game. If SAP were to include this functionality, they would be the only BI vendor capable of having a serious predictive tool integrated with the rest of the platform.... but this looks pretty weak.
I can only hope a later release will remedy this - or maybe the SDK will allow me to create what I need.
As things stand, I could built a random forest using this tool, but I would have to use a lot of hardcoded SQL to make it happen. And if I wanted to go down that road, I could use the algorithms that come with the Microsoft/Oracle software.
Please let me be wrong........

What are the different steps to follow in order to develop an application and deploy it into a PAC

Hi,
I developped a program on my computer but in order to deploy it in a PAC , I don't know what are the different steps to follow?
What are the difference between a stand alone application and communication with server mode.
Can the file which will be downloaded into the PAC be in a form othre than (.exe).
what does the deployment licence consist of??? is it a software?
if the file is .exe then how to maintain it?
Thank you for all,
Regards

Hi!
   Since I'm familiar with FieldPoint PACs, I'll refer to that (but maybe it is similar for cRIO...).
   An embedded application (standalone), runs entirely and independently on the PAC, while if you're not doing this, you'll have your computer, with LabView, which is controlling the PAC. In this mode, application is dowloaded in PAC's RAM, so when you reboot controller, application will be lost. If you build an embedded application, you can provide for application to boot authomatically at boot, each time the PAC reboots. These are some basic stuffs on embedded applications with LV.
    To deploy an application to a PAC, you need LabVIEW + Real-Time module. Without it, you can't build an embedded application on PACs.
    usually, the file dowloaded is an .exe, and some libraries. What would you like to have, exactly? For example, I think you can buy a simple .exe, which is universal, which loads VIs dinamically, so you can download directly VIs, but I've never tried this way....
   Deployment license, I think, refer to PCs, id est, when you use a PC or PXI as embedded target, in PACs, you have it bundled (it seems to me) whit the PAC you buy, so you don't have to buy an extra license for every PAC you ship with your application. Otherwise, if you develop a Real-Time application for a PC, you will ship PC + OS licensed + Real-Time extension licensed, but this is not your case, since you'll use PACs.
   The maintain problem... I've already faced with! Simply, for my needs it was enough to make an application which loads configuration files, depending on different task the controller has to do. If you have to dowload a completely new version of VI.... it's better to deploy new application from LV. But maybe you can bypass this problem with dinamic VIs loading...
    Let me know if this help.... Have a nice day!
graziano

What are the different ways to upload file data to SAP? Please help

Hi Experts,
I have to transfer huge file data (few lakhs records) to SAP business transaction. What are the different ways to do the same? I have heard of BDC and LSMW. But are there any more options?
Which option is best suited for huge file data?
Is LSMW an old technology and SAP will not support it any more?
Kindly answer my queries at the earliest.
I will be greatful to you if you can help me.
Thanks
Gopal

for uplodig data to non sap we have 2 methodes
i) if u know bapi u will use lasm
2) bdc
but u mentioned so many records isthere
best thing is u will uplode all record sto al11 using XI interface
then u have to write bdc / lsmw program
beter to go for lsmw before that u will find bapi
if u will unable to find bapi
u have to create bapi and use it in lasmw
ofter that u have schedule the lsmw program as a bockground
then u have to create a job for it
and release from sm 37
then u have to moniter through bd87
if u want to go through i will help u.
if it is usefull to u pls give points
Saimedha

What are the different kind of parameter/attributes we can set in XI ?

Hi Experts
    Yesterday i have attended an interview ....one question was
    1) What are the different knid of parameters we can set in XI ? Have done ?
        what and all the cases we will set the parameters/Attributes?
and one more was
   2) How will you do Stress testing in XI ?
Awaitng for responses
Adv thax and regards
Kiran lvs

Hi,
1) What are the different knid of parameters we can set in XI ? Have done ?
what and all the cases we will set the parameters/Attributes?
-First you should ask in which stage or where do you want to configure parameters ,i mean Whatever parameters we can set in XI all comes under this question like all sort of Adapters,each of adapter can have its own set of configuration , configuration parameters,XI admin config parameters.. etc..
and one more was
2) How will you do Stress testing in XI ?
In general stress tesing will be done by testing team
Stress testing by way of sending more messages and performance also
see the below links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3a67c790-0201-0010-89aa-d27d97dd1374
Rules of thumb on size of messagetypes in XI
/people/sravya.talanki2/blog/2006/02/28/simulating-xi-messages-proto
Measure Performance
Regards
Chilla..

What are the Different Ways of receiving Acknowlegements ?

Hi Experts,
Can you please let me know what are the Different Ways of receiving Acknowlegements from target system as a response to the Message sent from source system.
As when we send Idoc to target system acknowledgement is sent through XI to Source system, what are the configuration steps required for it. Can we use Webservice or link which can be provided to target/customer system and acknowledgement is confirmed using this medium. Please suggest any possible option.
Where I can find the related information or standard document about the same.
Please guide.
Regards,
Nitin

Hi ,
Can you please let me know what are the Different Ways of receiving Acknowlegements from target system as a response to the Message sent from source system.
System acknowledgments used by the runtime environment to confirm that an asynchronous message has reached the receiver.
Application acknowledgments used to confirm that the asynchronous message has been successfully processed at the receiver
These are of positive or Negative.
As when we send Idoc to target system acknowledgement is sent through XI to Source system, what are the configuration steps required for it. Can we use Webservice or link which can be provided to target/customer system and acknowledgement is confirmed using this medium. Please suggest any possible option.
This is based on your souce system to accept the ack, what is the protocol used to communicate with the source system.
http://help.sap.com/saphelp_nw04/helpdata/EN/55/65c844539349e9b1450581ab44a5e6/frameset.htm
Regards
Harsha Paruchuri

What are the different types of bind that we can use to configure COREid?

Hi
What are the different types of LDAP bind that we can use to configure COREid?
Thanks for your input.

(http://download-west.oracle.com/docs/cd/B28196_01/idmanage.1014/b25343/idconfig.htm#BABGAECB)
7.5.2 Creating an LDAP Directory Server Profile

What's the capacity of the different models?

Similar Messages

Maybe you are looking for