What's the Commitment item? And how to use it?

When I create a G/L account by FS00 I need to input a Commitment item.
But I don't know how to use it.
Can you tell me what's the Commitment item? And how to use it?
Thank you very much.
Moderator: Try pressing F1 or going to help.sap.com

>>In SAP XI / PI, WS adapter is not thier frm standard SAP.
Are you sure about this?
WS is a standard adapter shipped along with PI 7.1 installation.
Quote from help.sap.com
Using the WS adapter you can configure the communication of systems, which communicate with each other using the Web service runtime either directly (point-to-point) or using the Integration Server
Refer:
http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/37d73b80554c2ce10000000a1553f6/frameset.htm
If you are not sure about what you are saying, it is better not to say it.

Similar Messages

What's the WS adapter and how to use it?

Hi,
When I create Comunication channel, i need to select adapter type.
one of the adapter types is WS adapter?
I searched in help portal and sdn, but can't find any information.
Who know WS adapter and how to use it?
Could youplease provide such information.
Thanks in advance,
Best Regards, Johnney.

>>In SAP XI / PI, WS adapter is not thier frm standard SAP.
Are you sure about this?
WS is a standard adapter shipped along with PI 7.1 installation.
Quote from help.sap.com
Using the WS adapter you can configure the communication of systems, which communicate with each other using the Web service runtime either directly (point-to-point) or using the Integration Server
Refer:
http://help.sap.com/saphelp_nwpi71/helpdata/en/0d/5ab43b274a960de10000000a114084/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/en/45/37d73b80554c2ce10000000a1553f6/frameset.htm
If you are not sure about what you are saying, it is better not to say it.

What's the implicit joins and how to configure it?

Hello guys
what's the implicit joins and how to configure it? What's the purpose of implicit and explicit joins?
Please help
Thank you

Thus, on my side, I think that :
Explicit join define the join condition between the key column from the table.
(table1.di = table2.id)
While
Implicit Join define :
* the type of join outer, inner, ...
http://gerardnico.com/wiki/dw/join/start
* And the relationship (one-to-many, cardinality)
http://gerardnico.com/wiki/dw/data_quality/relationships
And all this information are used to generate the statement (query).
And I don't really know why you have two type of key :
* Physical Foreign Keys
* Logical Foreign Keys
Regards
Nico

What does the scriptcollector do and how does it related to jsf lifecycle?

hi,
i want to know what does the scriptcollector do and how does it related to jsf lifecycle? and also in the scriptcollector if i call this,
preRender=#{myBean.onPageLoadBegin}
postRender=#{myBean.onPageLoadEnd}
how my page will react?

The hx:scriptCollector is part of the IBM Faces Client Framework and has nothing to do with Sun JSF RI.
Lot of the hx components require specific Javascript and those hx components should be placed inside a single hx:scriptCollector which on its turn checks the nested hx components and renders the desired Javascript for it at the end of the tag. Check the HTML source for that Javascript.

What is the rainbow pinwheel and how do I get rid if it?

What is the rainbow pinwheel and how can I stop it from freezing a video?

can you give more info on this one.
os version?
application that you're using to watch the video?
what format is the video?

What is the model number and how many ports in the back?

What is the Model number and how many ports int he back?

You can compare your yourself here:
http://www.apple.com/wifi/
The AirPort Express is Model Number A1394
The AirPort Extreme is Model Number A1408

I have been fighting a losing battle with iDVD. What is the latest version and how can I obtain it?

I have been fighting a losing battle with my copy of iDVD. What is the latest version and how do I obtain it?

The latest and last version of iDVD is 7.1.2. iDVD 7 is included in the boxed disc of iLife 08, 08 and 11. You can get copies of them at Amazon.com.
The History of iLife
Version
Intro
Cost
OS
IPhoto
iWeb
iMovie
iDVD
iTunes
Garageband
iLife
01/03/03
$49
10.1
2
3
3
3
iLife 04
01/06/04
$49
10.2.6
4
4
4
4.2
1
iLife 05
01/11/05
$49
10.3.4
5
HD 5
5
4.71
2
iLife 06
01/10/06
$79
10.4.3
6
1
HD 6
6
6.0.2
3
iLife 08
08/07/07
$79
10.4.9
7.0
2.0
7.0
7.0
4.0
iLife 09
01/06/09
$79
10.5.6
8.0
3.0
8.0
7.0.3
5.0
iLife 11
10/20/10
$49
10.6.3
9.0
3.02
9.0
7.1
6.0
No matter what iLife version you purchase you'll need to run the latest updater which is availalbe from the Apple Downloads webpage.
OT

When I signin Apple ID showing error 403 on my mobile. What is the reason? And how can solve it?

When I signin Apple ID showing error 403 on my mobile. What is the reason? And how can solve it?

This often means that the maximum of 3 iCloud accounts have already been created on the phone and it cannot create another account. When this happens, all you can do is re-use one of the accounts previously created or creat your account using a different iOS device or Mac, if you have one.

What does VPN DO? And how to use it ?

What does VPN DO? And how to use it?

http://en.wikipedia.org/wiki/Vpn
Or Google 'what is a vpn' or 'how to use a vpn' many people have explained this better than me.
In short it wraps your traffic in to an encrypted link to a server (normally on the internet). Then the traffic leaves that server & goes onto the public internet. It is possible for the link to reveal information about you, but a VPN can protect you on open wifi or on bad networks etc.
Sometimes the VPN terminates inside a corporate network, so users can do work at home securely.
It is similar to using https for web browsing (secure http makes traffic difficult to intercept & read).

What is correlation ? when and how to use it in BPEL process?

Hi,
What is correlation ? when and how to use it in BPEL process?
Thanks

Hi:
Take a look at this entry http://blog.andrade.inf.br/2010/03/oracle-bpel-11g-correlation-sets.html
thx
best

What is the message type and basic type used for catsdb in idoc help me

what is the message type and basic type used for catsdb in idoc help me
ANY IDOC FOR CATSDB PLEASE TELL,
Regards,
Jagrut BharatKumar Shukla
points will be awarded

Hi,
Check these message types.
ATT_ABS_WITH_COST and WORKSCHED_WITH_COST.

What is report painter? and how to use it

hi all
what is report painter and how we use it.
please send tutorial
thanks & regards

hi
Report painter
the below Pdf should help you
http://www.virtuosollc.com/PDF/Get_Reporter.pdf
Regards,
Nitin Aggarwal
Please assign points if its helpful.

What is the "Bookmarks Bar" and how do I use it?

I've been all over my iPad user guide and can find zero information about the "bookmarks bar" except how to make it appear and disappear. I am now able to make a blank area near the top of the Safari screen appear and disappear - GREAT!!!! Information as to what this area may contain, how to place and remove items from it, etc is NOWHERE! If there is anyone out there that uses this feature, please explain what it is and if you find it useful.
In windows internet explorer, there is a "favorites bar" near the top of the screen where I can place the icons for my most used favorites. Instead of opening a favorites menu and scrolling through it to find what I want, I just click the icon that is always present at the top of the internet explorer page - really useful. I imagine that "bookmarks bar" is a similar feature in Safari but it's completely ignored in the iPad user guide.
Thanks for any help you can give.
- Jim

Thanks Skydiver,
This was easy and does exactly what I thought it would do! What threw me off was the menu that pops up when you go to save a page as a bookmark. The menu lists 6 choices: Add bookmark; Add to reading list; Add to home screen; mail link to this page; Tweet; and Print. Notice there is no choice to "add to bookmarks bar". You have to select "add bookmark" and then within the next process box you have the option to specify an alternative to bookmark. When you look for the alternatives, "bookmarks bar" shows up. Not exactly obvious, is it?
It's almost like they don't don't want you to use it. This is absolutely OBTUSE!
Thanks again, Skydivier!

What is the file attribute @ and how can I get rid of it

I converted some wav files using Roxio Toast 11 and the output AIF files have a '@' in the file permissions and are not displayed in Finder. What does the '@' mean and how can I get rid of it. Would love to know why Toast adds it but I posted a question on Roxio's site and hopefully will get an answer to that.
thanks for the help
john

okay, so I yes, it does indicate extended attributes. I executed ls -l@ *.aif and got this
-rw-r--r--@ 1 johnprokopek staff
9690378 Oct 6 13:30 zeppelin1969-08-31t01.aif
    com.apple.FinderInfo
32
-rw-r--r--@ 1 johnprokopek staff   31533402 Oct 6 13:30 zeppelin1969-08-31t02.aif
    com.apple.FinderInfo
32
-rw-r--r--@ 1 johnprokopek staff   72260634 Oct 6 13:30 zeppelin1969-08-31t03.aif
    com.apple.FinderInfo
32
-rw-r--r--@ 1 johnprokopek staff 167361402 Oct 6 13:30 zeppelin1969-08-31t04.aif
    com.apple.FinderInfo
32
-rw-r--r--@ 1 johnprokopek staff 114149754 Oct 6 13:30 zeppelin1969-08-31t05.aif
    com.apple.FinderInfo
32
-rw-r--r--@ 1 johnprokopek staff 246019338 Oct 6 13:30 zeppelin1969-08-31t06.aif
    com.apple.FinderInfo
32
-rw-r--r--@ 1 johnprokopek staff   51214938 Oct 6 13:30 zeppelin1969-08-31t07.aif
    com.apple.FinderInfo
32
I then did xattr -c *.aif to clear the extended attributes which got rid of the '@' but the files are still not being displayed in Finder.
Help!

CSCC - what does the "id" mean and how to get it

https://apps.cisco.com/CustAdv/ServiceSales/contract/productDetailsIndex.do?method=loadProductDetails&contractId=55565082772&serviceLineNumber=55565082912&lineID=55565086982&instanceID=1483016052&contractNumber=93913779&id=382878711&majorOrMinor=MAJOR&coveredOrUncovered=COVERED&lineSeqNo=45823525&contextID=0.4317186686218467
Currently I am developing a web client tool to get contract information based on the SN. And I don't find any existing API of CSCC, I had to parse the html instead. But I encountered an issue here as $subject which highlighted in the above link. What does the id number mean and how can I get it ?

Are you running Firefox in Windows 95 or 98 compatibility mode?
Mozilla/5.0 ('''Windows NT 4.0'''; rv:35.0) Gecko/20100101 Firefox/35.0
Firefox won't install on Windows NT 4.0 - so something is changing your useragent and saying that your operating system is like 20 years old.
Right-click your Firefox desk-top shortcut and select Properties. Then open the Compatibility tab and look at '''Compatibility mode''' - un-check that box if it has a check-mark.

What's the Commitment item? And how to use it?

Similar Messages

Maybe you are looking for